Okuqukethwe
fihla
KOLINK Ikhodi Yobumbano X ARGB Midi Tower Case
OKUQUKETHWE I-ACCESSORY PACK
UKUSUSWA KWEPHANELI
- Susa iphaneli yesokunxele ngokukhipha izikulufa ezine zesithupha bese uphakamisa iphaneli yengilazi kude.
- Khipha iphaneli yohlangothi lwesokudla ngokukhipha izikulufi zesithupha zangemuva bese ushelelisela iphaneli emuva.
- Ukuze ususe iphaneli yangaphambili, susa iphaneli yepulasitiki esesandleni sokudla kuqala (qaphela izintambo ze-I/O) bese uqaqa izikulufu ezimbili zephaneli yengilazi, ngaphambi kokusuka kude ne-chassis.
UKUFAKA IBHODHO LOMAMA
- Qondanisa i-motherboard yakho ne-chassis ukuze uthole lapho okuzomele kufakwe khona. Uma usuqedile, susa i-motherboard futhi ubophe ama-stand-offs ngokufanele.
- Faka ipuleti lakho le-I/O lebhodi lomama kusikwe ngemuva kwekesi.
- Beka i-motherboard yakho ku-chassis, uqinisekise ukuthi izimbobo ezingemuva zingena epuletini le-I/O.
- Sebenzisa izikulufu ze-motherboard ezinikeziwe ukuze unamathisele i-motherboard yakho ku-chassis.
UKUFAKA KOKUNIKEZWA KWAMANDLA
- Beka i-PSU ngezansi kwesokudla secala, ngaphakathi kwegumbi elingemuva.
- Qondanisa izimbobo futhi uzivikele ngezikulufo.
UKUFAKA IKHADI LE-GRAPHICS/PCI-E
- Susa izimbozo ze-PCI-E ezingemuva njengoba kudingeka (kuya ngosayizi wesikhala sekhadi lakho)
- Beka kahle futhi slayida ikhadi lakho le-PCI-E endaweni, bese ulivikela ngezikulufu zekhadi ezengezo ezinikeziwe.
- Uma ikhweza iqonde, namathisela ubakaki we-GPU ohlinzekiwe ku-PSU, vikela ikhebuli yesikhuphukeli se-Kolink PCI-E kuyo (ethengiswa ngokwehlukana), bese unamathisela ikhebula ebhodini lomama. Susa amakhava e-PCI-E angemuva uma kudingeka, bese ubeka ngokucophelela ikhadi lakho le-PCI-E, faka endaweni yesikhuphukeli se-PCI-E, futhi uvikele ngezikulufu ezifakiwe.
2.5″ UKUFAKA KWE-SDD
Faka ama-SSD akho phansi kubakaki be-HDD/SSD futhi uvikeleke usebenzisa izikulufu.
2.5″ UKUFAKA KWE-SDD
Qondanisa i-HDD/SSD engu-2.5″ nezimbobo zesikulufu ohlangothini olungaphezulu kwesokudla sengemuva le-chassis bese ukhweza usebenzisa izikulufu (sicela uqaphele, izikulufu ezi-2 kuphela ezingasetshenziswa ukukhweza ama-SSD kulesi simo).
3.5″ UKUFAKA I-HDD
Khipha i-HDD yakho kubakaki usebenzisa izikulufu ezinikeziwe kanye ne-rubber grommet
UKUFAKA KWAbalandeli OKUPHEZULU
- Susa isihlungi sothuli phezulu kwekesi.
- Qondanisa abalandeli bakho nezimbobo zesikulufu phezulu kwe-chassis futhi uyivikele ngezikulufo.
- Shintsha isihlungi sakho sothuli uma sesivikelekile.
UKUFAKA KWAFANI NGAPHAMBI/NGEMUVA
Qondanisa ifeni yakho nezimbobo zesikulufu ku-chassis futhi uyivikele ngezikulufo
UKUFAKWA KWE-WATERCOOLING RADIATOR
Vikela amafeni kurediyetha, bese ubophela irediyetha ngaphakathi kwe-chassis ngokuyivikela ngezikulufu ezisuka ngaphandle.
UKUFAKWA KWEPHANSI I/O
- Hlola ngokucophelela ukulebula kwesixhumi ngasinye kuphaneli ye-I/O ukuze uhlonze umsebenzi waso.
- Ireferensi ephambanayo ngemanuwali yebhodi lomama ukuze kutholwe lapho kufanele kufakwe ucingo ngalunye, bese uvikela eyodwa ngesikhathi. Sicela uqinisekise ukuthi zifakwe ngendlela efanele ukuze ugweme ukungasebenzi noma ukulimala.
Amadokhumenti / Izinsiza
 |
KOLINK Ikhodi Yobumbano X ARGB Midi Tower Case [pdf] Imaniwali yosebenzisayo Ikhodi Yobumbano X ARGB Midi Tower Case, Unity Code X, ARGB Midi Tower Case |
