I-CITADEL MESH
Icala le-MIDI TOWER
IMANIWALI YOSEBENZISAYO
OKUQUKETHWE I-ACCESSORY PACK
UKUSUSWA KWEPHANELI
UKUSUSWA KWEPHENELI PHAMBI/ESEceleni
- Khipha iphaneli yangaphambili ngokudonsa ngokucophelela ukusuka phansi kwephaneli
- Susa iphaneli yesokunxele ngokudonsa ithebhu yokudonsa & ngokushwiba umnyango uphumele ngaphandle, bese uphakamisa amahinge ngemuva kwekesi.
- Khipha ifasitelana elingakwesokudla ngokukhipha izikulufu ezimbili ze-thrum ezingemuva bese ushelelisela iphaneli emuva
I-Motherboard INSTALLA
UKUFAKA IBHODHO LOMAMA
- Qondanisa i-motherboard yakho ne-chassis ukuze uthole lapho okumele kufakwe khona izitobha Uma usuqedile, susa i-motherboard bese ubophela ama-stand-off ngokufanele.
- Faka ipuleti lakho le-I/O lebhodi lomama kusikwe ngemuva kwekesi
- Beka i-motherboard yakho ku-chassis, uqinisekise ukuthi izimbobo ezingemuva zingena epuletini le-I/O
- Sebenzisa izikulufu ze-motherboard ezinikeziwe ukuze unamathisele i-motherboard yakho ku-chassis
UKUFAKA KOKUNIKEZWA KWAMANDLA
UKUFAKA KOKUNIKEZWA KWAMANDLA
- Beka i-PSU ngemuva kwecala, ngaphakathi kwendwangu ye-PSU
- Qondanisa izimbobo futhi uvikeleke ngezikulufo
UKUFAKA IKHADI LE-GRAPHICS/PCI-E
UKUFAKA IKHADI LE-GRAPHICS/PCI-E
- Susa izimbozo ze-PCI-E ezingemuva njengoba kudingeka (kuya ngosayizi wesikhala sekhadi lakho)
- Beka ngokucophelela futhi ushelelisa ikhadi lakho le-PCI-E endaweni, bese uvikeleka ngezikulufu zekhadi ezengezo ezinikeziwe Uma ikhwezwa iqonde phezulu, namathisela okokukhweza okume mpo kwe-GPU kundwangu ye-PSU, namathisela Ikhebuli ye-Klink PCI-E Riser (Ithengiswa ngokuhlukana). khipha izimbobo ze-PCI-E ezingemuva bese ubeka ikhadi endaweni, ukhweze intambo ye-PCI-E Riser ngokuphepha
- Khumbula ukunamathisela enye ingxenye yentambo ye-PCI-E Riser kumabhodi wakho we-PCI-E 16x slot
2.5″ UKUFAKA I-SDD (F)
2.5″ Ukufakwa kwe-SSD (PHAMBILI)
- Qondanisa idrayivu yakho phezu kwezimbobo zesikulufu futhi uvikeleke ngezikulufu ezisuka ngemuva
2.5″ UKUFAKA I-SDD (R)
2.5″ Ukufakwa kwe-SSD (NGEMUVA)
Beka i-SSD yakho phezu kukabakaki we-HDD futhi uvikeleke ngezikulufu
3.5″ UKUFAKA I-HDD
3.5″ UKUFAKA I-HDD
- Shelelezisa idrayivu ungene/ebaleni elingu-3,5″ ngemuva kwekesi
- Vikela idrayivu nhlangothi zombili usebenzisa izikulufu ezinikeziwe futhi uqinise isandla
UKUFAKA KWAbalandeli OKUPHEZULU
UKUFAKA KWAbalandeli OKUPHEZULU
- Susa isihlungi sothuli phezulu kwekesi
- Qondanisa abalandeli bakho nezimbobo zesikulufu phezulu kwe-chassis futhi uvikeleke ngezikulufu
- Shintsha isihlungi sakho sothuli uma sesivikelekile
UKUFAKA KWAFANI NGAPHAMBI/NGEMUVA
UKUFAKA KWAFANI NGAPHAMBI/NGEMUVA
- Qondanisa ifeni yakho nezimbobo zesikulufu ku-chassis futhi uvikeleke ngezikulufo
UKUFAKWA KWE-WATERCOOLING RADIATOR
UKUFAKWA KWE-WATERCOOLING RADIATOR
- Vikela amafeni kurediyetha, bese ubophela irediyetha ngaphakathi kwe-chassis ngokuyivikela ngezikulufo ezisuka ngaphandle.
UKUFAKWA KWEPHANSI I/O
UKUFAKWA KWEPHANSI I/O
Hlola ngokucophelela ukulebula kwesixhumi ngasinye kusuka kuphaneli engu-1/0 ukuze uhlonze umsebenzi waso
Ireferensi ephambene nebhukwana le-motherboard ukuze uthole lapho ucingo ngalunye kufanele lufakwe khona, bese uvikela eyodwa ngesikhathi, Sicela uqinisekise ukuthi zifakwe ngendlela efanele ukuze ugweme ukungasebenzi noma ukulimala.
Amadokhumenti / Izinsiza
 |
I-KOLINK ANL-INT Citadel Mesh Midi Tower Case [pdf] Imaniwali yosebenzisayo ANL-INT, ANL-INT Citadel Mesh Midi Tower Case, Citadel Mesh Midi Tower Case, Mesh Midi Tower Case, Midi Tower Case, Tower Case |