I-KMC ILAWULA Isistimu Yokulinganisa Ukugeleza Komoya kwe-TrueFit

Ulwazi Lomkhiqizo

Imininingwane

• Igama Lomkhiqizo: I-TrueFit Airflow Measurement System
• Umkhiqizi: Izilawuli ze-KMC
• Ikheli: 19476 Industrial Drive, New Paris, IN 46553
• Othintana naye: 877-444-5622
• Webindawo: www.kmccontrols.com

Imiyalo yokusetshenziswa komkhiqizo

Example Imidwebo

Uhlelo lokusebenza olujwayelekile

I-Outdoor Air Damper Isicelo Sokusiza Ngengcindezi

Buyisa i-Air Damper Isicelo Sokusiza Ngengcindezi

Ukukhweza Izingxenye Zesistimu

Ukukhweza Isilawuli

• QAPHELA: Faka isilawuli ngaphakathi kwendawo ebiyelwe yensimbi ukuze uvikele i-RF nokuvikela ngokomzimba.
• QAPHELA: Ukuze ukhweze isilawuli ngezikulufu endaweni eyisicaba, qedela izinyathelo Ku-Flat Surface. Noma ukukhweza isilawuli kumzila wesitimela we-DIN ongu-35 mm (njengokuhlanganiswe endaweni ebiyelwe), qedela izinyathelo kokuthi On a DIN Rail.

Emkhathini Oyisicaba

1. Misa isilawuli endaweni eyisicaba ukuze amabhulokhi etheminali afinyeleleke kalula ukuze uthole izintambo ngemva kokuba isilawuli sifakwe.
   • QAPHELA: Amatheminali amnyama awamandla. Amatheminali aluhlaza okokufaka nokuphumayo. Ama-greyterminals awokuxhumana.
2. Skriva isikulufu sensimbi seshidi elingu-#6 (ingqikithi yesine) ekhoneni ngalinye lesilawuli.

Ku-DIN Rail

1. Misa ujantshi we-DIN ukuze amabhulokhi wetheminali anekhodi enemibala afinyeleleke kalula ukuze kufakwe izintambo ngemva kokuba isilawuli sigxunyekiwe.
2. Khipha i-latch ye-DIN ize ichofoze kanye.
3.  Misa isilawuli ukuze amathebhu amane aphezulu esiteshi esingemuva ahlale kujantshi we-DIN.
4.  Yehlisa isilawuli ngokumelene nomzila wesitimela we-DIN.
5.  Phusha ku-latch ye-DIN ukuze ubambe ujantshi.
   • QAPHELA: Ukuze ususe isilawuli, donsa iletshi ye-DIN ize ichofoze kanye bese uphakamisa isilawuli usisuse kumzila we-DIN.

Ukufaka i-Inclinometer

QAPHELA: Uma umoya wangaphandle dampI-er ine-eksisi eqondile damper blades, uzodinga kuqala ukufaka i-HLO-1050 Linkage Kit emoyeni wangaphandle damper. (Bheka Umhlahlandlela Wokufaka Ikhithi Yokuxhumanisa ye-HLO-1050.) Bese uqhubeka ngezansi.

1. Misa i-inclinometer ku-eksisi evundlile ngaphandle komoya dampi-er blade ukuze ucingo luhambisane nezindwani futhi umcibisholo okwi-inclinometer ubheke phezulu.QAPHELA: Uma iyunithi inomoya wangaphandle ongaphezu kowodwa damper, khweza i-inclinometer emoyeni ovundlile we-eksisi damper blade. (Kodwa-ke, uma iyunithi nayo inomoya obuyayo ongaphezu kowodwa damper, i-AFMS ayikwazi ukufakwa.)
2.  Namathisela i-inclinometer ku-dampi-blade enezikulufu zensimbi ezimbili ezingu-#8.
3.  Khipha ucingo kude no-damper ukuze ingabophi i-damper.
4. Hambisa ucingo kusilawuli.
   • QAPHELA: Namathisela ukukhululeka okwanele (isb. ngamathayi ezintambo) uma kudingeka ukuze uvimbele i-inclinometer ekukhishweni ngephutha ku-dampi-blade ngesikhathi sokulungiswa kwemishini.

Ukukhweza amashubhu e-Supply Airflow Pickup

Kumelwe kube namashubhu anele wokuthatha ukugeleza kwengcindezi okufanele afakwe, ngosayizi wokuvula, ukuze kutholwe inani elinembile elimaphakathi lokusakaza komoya. Kunconywa amashubhu wokuthatha amaningi (okungenani 2) axhunywe kuhlu lwama-pitot afanayo. Amashubhu okuthatha umfutho womoya wokuhlinzeka angafakwa ngendlela eyodwa yezindlela ezintathu:

• Ku-Supply Air Fan Bell (kusetshenziswa i-SSS-1112/3/4)
•  Ku-Supply Air Fan Bell (kusetshenziswa i-SSS-1115/6/7)
• Ku-Supply Air Duct (kusetshenziswa i-SSS-101x).

Ku-Supply Air Fan Bell (kusetshenziswa i-SSS-1112/3/4)

1. Misa unyawo olukhuphukayo lwamashubhu onqenqemeni lwensimbi yesifeni ukuze iziphetho zamashubhu zibheke maphakathi nendawo yokufaka ifeni.
   • QAPHELA: Wonke amaphoyinti okulanda kufanele abe ngaphakathi kokusakaza komoya ukuze uthole isilinganiso esinembile sokugeleza kwengcindezi ehlukile. Uma amashubhu okuthatha amade kakhulu, sebenzisa imodeli emfushane.
2. Namathisela amashubhu kunsimbi yefeni usebenzisa izikulufu ezimbili ezizithephayo ezifakwe ngezimbobo zokukhweza ezingu-3/16”.
3. Phinda izinyathelo 1 kuya kwezi-2 ukuze ukhweze amashubhu asele.

Ku-Supply Air Fan Bell (kusetshenziswa i-SSS-1115/6/7)

1. Misa amashubhu okulandwayo ukuze izinyawo ezikhuphukayo zivule indawo yokungena yabalandeli futhi wonke amaphoyinti okulandwa abe ngaphakathi kokusakaza komoya.
   • QAPHELA: Wonke amaphoyinti okulanda kufanele abe ngaphakathi kokusakaza komoya ukuze uthole isilinganiso esinembile sokugeleza kwengcindezi ehlukile. Uma amashubhu okuthatha amade kakhulu, sebenzisa imodeli emfushane.
2. Namathisela unyawo lokuqala olukhwezayo kunsimbi yabalandeli usebenzisa izikulufu ezimbili ezizithephayo ezifakwe ngezimbobo ezikhwezayo ezingu-3/16”.
3. Namathisela unyawo lwesibili olukhwezayo kolunye uhlangothi lwensimbi yesifeni (noma i-strut) usebenzisa izikulufu ezimbili ezizithephayo ezifakwe kuma-cutouts akhwezayo angu-3/16".
4.  Phinda izinyathelo 1 kuya kwezi-3 ukuze ukhweze amashubhu asele.

Ku-Supply Air Duct (kusetshenziswa i-SSS-101x)

• • QAPHELA: Amashubhu okuthwebula ukugeleza kwengcindezi kufanele afakwe emoyeni ohlungiwe endaweni yokugeleza kwe-laminar, okungamadayamitha ayi-6 aqondile wemigudu ezansi nomgudu womoya.

1. Nquma isiqondiso sokugeleza kwepayipi bese ufaka amashubhu okuthatha ngokusekelwe kumcibisholo wokugeleza.
   • QAPHELA: Amashubhu okuthatha kumele afakwe ngomcibisholo obheke lapho kugeleza komoya.
2. Sika imbobo engu-7/8” embotsheni ukuze wamukele amashubhu wokulandwa.
3. Namathisela amashubhu epayipi usebenzisa izikulufu ezimbili ezizithephayo ezifakwe ngezimbobo zokukhweza ezingu-3/16”.
4. Phinda izinyathelo 1 kuya kwezi-3 ukuze ukhweze amashubhu asele.

Ukukhweza Amashubhu Okusiza Ngengcindezi

Ukukhweza i-OAD Pressure Assist
Qedela lezi zinyathelo ezengeziwe kuphela uma ufaka i-TRF-5901C-AFMS noma i-TRF-5901CE-AFMS yohlelo lokusebenza losizo lwe-OAD. (Bheka Umhlahlandlela Wokukhetha we-TrueFit AFMS ukuze uthole imininingwane.)

Ukukhweza I-Pickup Tube yokuqala

1. Thola indawo yeshubhu yokuqala yokulanda ngaphandle komoya wangaphandle damper, endaweni lapho kungekho khona ukugeleza kweziyaluyalu kusukela ekungeneni komoya okungena ngaphandle.
   • QAPHELA: Okwesiboneloampi-le, ekhoneni elingaphansi kwesivalo somoya esingaphandle. (Bheka umdwebo ongenhla.)
2. Nquma isiqondiso sokugeleza komoya ukuze ufake amashubhu okuthatha ukuze isigxivizo somcibisholo othi FLOW sihambisane nesiqondiso sokugeleza komoya (ngokulinganisa ingcindezi emile).
   • QAPHELA: Kulokhu, umcibisholo othi FLOW ungakhomba phezulu noma phansi. Maka i-SSS-10xx ukuze uqinisekise abanye ukuthi lo mumo we-perpendicular ngempela uwumumo ohlosiwe.
3. Sika imbobo engu-7/8” (22 mm) embotsheni ukuze wamukele amashubhu okuthatha.
4. Namathisela amashubhu okuthatha eshidini lensimbi usebenzisa izikulufu ezimbili ezizithephayo ezifakwe ngezimbobo ezikhwezayo ezingu-3/16” (5 mm).

Ukukhweza I-Pickup Tube Yesibili

1. Thola indawo yeshubhu yokulandwa yesibili egumbini lomoya elixubile, endaweni lapho kungekho khona ukugeleza komoya okuneziyaluyalu.
   • QAPHELA: Okwesiboneloample, ekhoneni legumbi lomoya elixubile ngaphakathi nje damper.
2. Nquma isiqondiso sokugeleza komoya ukuze ufake amashubhu okuthatha ukuze isigxivizo somcibisholo othi FLOW sihambisane nesiqondiso sokugeleza komoya (ngokulinganisa ingcindezi emile).
   • QAPHELA: Kulokhu, umcibisholo othi FLOW ungakhomba phezulu noma phansi. Maka i-SSS-10xx ukuze uqinisekise abanye ukuthi lo mumo we-perpendicular ngempela uwumumo ohlosiwe.
3. Sika imbobo engu-7/8” (22 mm) embotsheni ukuze wamukele amashubhu okuthatha.
4.  Namathisela amashubhu okuthatha eshidini lensimbi usebenzisa izikulufu ezimbili ezizithephayo ezifakwe ngezimbobo ezikhwezayo ezingu-3/16” (5 mm).

Ukukhweza i-RAD Pressure Assist
Qedela lezi zinyathelo kuphela uma ufaka i-TRF-5901C-AFMS noma i-TRF-5901CE-AFMS yohlelo lokusebenza losizo lwe-RAD. (Bheka Umhlahlandlela Wokukhetha we-TrueFit AFMS ukuze uthole imininingwane.)

Ukukhweza I-Airflow Pickup Tube yokuqala

1. Thola indawo yeshubhu yokuqala yokulanda eduze nomoya obuyayo dampkwe, kwe damper ohlangothini olungenhla nomfula.
2. Nquma isiqondiso sokugeleza komoya ukuze ufake ishubhu lokuthatha ukuze umcibisholo othi FLOW uhambisane nesiqondiso sokugeleza komoya (ngokulinganisa ingcindezi emile).
   • QAPHELA: Kulesi simo, isigxivizo somcibisholo othi FLOW singakhomba phezulu noma phansi (ngethunjana elivundlile), noma kwesokunxele noma kwesokudla (ethubeni elime mpo).
   • QAPHELA: Kunconywa ukuthi umaki usetshenziswe ku-SSS-10xx ukuze kuqinisekiswe abanye ukuthi lo mumo we-perpendicular ngempela uwumumo ohlosiwe.
3.  Sika imbobo engu-7/8” (22 mm) embotsheni ukuze wamukele ishubhu yokulanda.
4. Namathisela ishubhu yokulanda eshidini lensimbi usebenzisa izikulufu ezimbili ezizithephayo ezifakwe ngezimbobo zokukhweza ezingu-3/16” (5 mm).

Ukukhweza I-Airflow Pickup Yesibili Tube

1. Thola indawo yeshubhu yesibili yokulanda eduze nomoya obuyayo dampkwe, kwe damper's downstream (okungukuthi umoya oxubile) ohlangothini.
2.  Nquma isiqondiso sokugeleza komoya ukuze ufake ishubhu lokuthatha ukuze umcibisholo othi FLOW uhambisane nesiqondiso sokugeleza komoya (ngokulinganisa ingcindezi emile).
   • QAPHELA: Kulesi simo, isigxivizo somcibisholo othi FLOW singakhomba phezulu noma phansi (ngethunjana elivundlile), noma kwesokunxele noma kwesokudla (ethubeni elime mpo).
   • QAPHELA: Kunconywa ukuthi umaki usetshenziswe ku-SSS-10xx ukuze kuqinisekiswe abanye ukuthi lo mumo we-perpendicular ngempela uwumumo ohlosiwe.
3. Sika imbobo engu-7/8” (22 mm) embotsheni ukuze wamukele ishubhu yokulanda.
4. Namathisela ishubhu yokulanda eshidini lensimbi usebenzisa izikulufu ezimbili ezizithephayo ezifakwe ngezimbobo zokukhweza ezingu-3/16” (5 mm).

Ukukhweza I(ama) Transducer

QAPHELA: Qedela lezi zinyathelo kuphela uma usebenzisa isilawuli se-TRF-5901C(E)-AFMS.

QAPHELA: Gwema izindawo ezinokudlidliza okukhulu noma umswakama owedlulele. Indawo ebiyelwe inokuvulwa okujwayelekile kwe-conduit engu-1/2-intshi futhi ingase ifakwe ne-conduit coupler noma intambo yohlobo lwendlala.

ISEXWAYISO

Ungasebenzisi ezindaweni eziqhumayo noma eziyingozi, ezinegesi evuthayo noma evuthayo, njengokuphepha noma idivayisi yokumisa izimo eziphuthumayo, noma kunoma yiluphi olunye uhlelo lokusebenza lapho ukwehluleka komkhiqizo kungaholela ekulimaleni komuntu siqu.

1. Qinisekisa ukuthi kunesikhala esanele ezizungeze iyunithi ukwenza ingcindezi noxhumo lukagesi.
2. Sebenzisa izikulufu ezixhunywe embotsheni yokukhweza yekesi ukuze ubophe ukuhlanganisa endaweni eseduze nohlu lwamashubhu okuthatha ingcindezi. Ungaqinisi kakhulu.
3. Uma amashubhu okulandwa okugeleza kwengcindezi eyengeziwe afakwe emoyeni wangaphandle dampnoma buyisela umoya damper indawo yezilinganiso zosizo lwengcindezi, phinda izinyathelo 1 no-2 ukuze uthole i-transducer yesibili yokucindezela etholakala eduze kwalawo mashubhu okuthatha.

Ukukhweza izinzwa ze-OAT, iRAT, ne-MAT

I-STE-1411/12/13/14 Inzwa yethusi eBendable
Sebenzisa inzwa yethusi egobekayo ezingxenyeni zomoya ezixubile ezifinyeleleka kalula kanye namahodlo omoya angaphandle. Uma ingxenye yomoya oxubile ingafinyeleleki kalula, inzwa yekhebula eguquguqukayo ingasetshenziswa. Uma iyunithi ingenayo ihood yomoya yangaphandle efinyeleleka kalula, iprobe yensimbi eqinile ingasetshenziswa.

1. Sika imbobo egumbini lomoya elixubile leyunithi elikhulu ngokwanele ukondla i-copper probe evela ngemuva kwendawo ebiyelwe.
2. Faka i-sensor probe egumbini lomoya elixubile, goba ishubhu lokuhlola ukuze uvale indlela yomoya, futhi uvikeleke njengoba kudingeka.
   • QAPHELA: Gcina ubuncane berediyasi yokugoba engamayintshi ayisithupha ukuze uvimbele ukulimala kwezintambo noma izinzwa.
3. Bophela indawo ebiyelwe kuyunithi ngokubhoboza izimbobo ohlangothini lweyunithi nezikulufu zokulutha ezimbotsheni ezikhwezwayo kukesi.
4. Ngekhebuli eholela kusilawuli se-AFMS, namathisela ipayipi embotsheni yoxhumano enentambo engu-1/2” NPT ezansi kwendawo ebiyelwe njengoba kudingeka.
5. Vula ikhava ngokudonsa kancane i-latch ngakwesokudla kwendawo ebiyelwe ngenkathi udonsa isembozo.

I-STE-1415/6/7 Inzwa Yekhebula Eguquguqukayo
Inzwa yekhebula eguquguqukayo ingasetshenziswa uma ingxenye yomoya exubile ingafinyeleleki kalula.

1. Sika imbobo egumbini lomoya elixubile leyunithi elikhulu ngokwanele ukondla ikhebula lenzwa kusukela ngemuva kwendawo ebiyelwe inzwa
2. Faka ikhebula lenzwa kugumbi lomoya elixubile, ubophe intambo ukuvala indlela yomoya, futhi uvikeleke njengoba kudingeka.
   • QAPHELA: Ikhebuli eguquguqukayo ingabunjwa kalula ukuthi ilingane nanoma yimuphi usayizi wepayipi kodwa ibheke ubuncane berediyasi yokugoba
     amayintshi amabili ukuvimbela ukulimala kwezintambo noma izinzwa.
3. Bophela indawo ebiyelwe kuyunithi ngokubhoboza izimbobo ohlangothini lweyunithi nezikulufu zokulutha ezimbotsheni ezikhwezwayo kukesi.
4. Ngekhebuli eholela kusilawuli se-AFMS, namathisela ipayipi embotsheni yoxhumano enentambo engu-1/2” NPT ezansi kwendawo ebiyelwe njengoba kudingeka.
5. Vula ikhava ngokudonsa kancane i-latch ngakwesokudla kwendawo ebiyelwe ngenkathi udonsa isembozo.

I-STE-1404/05 I-Rigid Steel Probe
Sebenzisa i-probe yensimbi eqinile ye-return air duct. I-probe yensimbi eqinile ingase isetshenziselwe ipayipi lomoya langaphandle, kodwa kuphela uma iyunithi ingenayo ihood yomoya yangaphandle efinyeleleka kalula.

1. Beka inzwa engxenyeni eqondile yepayipi, kude nemithombo yokushisisa, ukupholisa, noma yokuswamisa amanzi.
2. Sika imbobo engu-1/4-intshi ye-probe ohlangothini lwepayipi kanye nezimbobo ezincane zezikulufu ezindaweni ezifanele.
3. Faka i-probe bese ubophela ukuhlanganisa epayipini usebenzisa izikulufu ezifakwe ezimbotsheni ezikhwezwayo endlini.
4. Vula isembozo senzwa (STE-1404 kuphela) ngokudonsa kancane i-latch ngakwesokudla kwendawo ebiyelwe ngenkathi udonsa ikhava.
5. Ngekhebuli eholela kusilawuli se-AFMS, namathisela ipayipi embotsheni yoxhumano enentambo engu-1/2” NPT ezansi kwendawo ebiyelwe njengoba kudingeka.

Ukukhweza i-Proportional Actuator

Qedela lezi zinyathelo kuphela uma singekho i-actuator elinganayo esivele ifakwe ku-d olungileampisicelo esidingekayo:

• Ngezinhlelo zokusebenza ezijwayelekile noma ze-OAD, khweza i-actuator elinganayo emoyeni wangaphandle damper (noma, ngokunye, emoyeni obuyayo damper, uma ihamba kanye nomoya wangaphandle damper).
• Ngezinhlelo zokusebenza zosizo lwe-RAD, khweza i-actuator elinganayo emoyeni obuyayo damper (noma, ngenye indlela, emoyeni wangaphandle dampehamba kanye nomoya obuyayo damper). Ukuze uthole imiyalelo yokuthi ungakhweza kanjani imodeli yakho ethile ye-MEP-series proportional actuator:

1. Khetha isixhumanisi esifanele ohlwini, noma sifune kokuthi Izilawuli ze-KMC webindawo:
   • I-MEP-4552
   •  I-MEP-4952
   •  I-MEP-7552
2. Finyelela kumhlahlandlela wokufaka otholakala ekhasini lomkhiqizo laleyo modeli.
3. Landela imiyalelo yokukhweza, ku-d efaneleampisicelo esidingekayo:
   • Ngezinhlelo zokusebenza zosizo ezijwayelekile noma ze-OAD, khweza i-actuator elinganayo emoyeni wangaphandle damper (noma, ngokunye, emoyeni obuyayo damper, uma ihamba kanye nomoya wangaphandle damper).
   • Ngezinhlelo zokusebenza zosizo lwe-RAD, khweza i-actuator elinganayo emoyeni obuyayo damper (noma, ngenye indlela, emoyeni wangaphandle dampehamba kanye nomoya obuyayo damper).

Ukuxhuma Izingxenye Zesistimu kusilawuli

Ukuxhuma amashubhu okulandwa kwe-Airflow
Okwe-TRF-5901C(E)-AFMS
Sebenzisa amashubhu osayizi ofanele we-polyethylene ukuze uxhume ingcindezi. Ubude be-tubing akufanele bube bude kunesidingo. Hlela ishubhu ukuze unciphise ingcindezi ekuxhumekeni futhi uvimbele i-kinking.
Ukuxhuma amashubhu e-Supply Airflow Pickup ku-Pressure Transducer

1. Ngeshubhu, xhuma ama-Port Hs awo wonke amashubhu okuthatha ngokuhambisana ku-loop, bese uxhuma kokokufaka Okuphezulu ku-transducer yomfutho womoya wokunikezela.
2. Ngeshubhu, xhuma ama-Port Ls awo wonke amashubhu okulandwayo ngokuhambisana ku-loop, bese uxhuma kokokufaka Okuphansi ku-transducer yomfutho womoya wokunikezela.

Ukuxhuma I-Airflow Pickup Tube ye-OAD Pressure Assist Application

Qedela lezi zinyathelo uma amashubhu amabili engeziwe wokuthwebula we-SSS-1000 efakwe endaweni yomoya wangaphandle damper for pressure help.

1. Okweshubhu yeveni efakwe ngaphandle komoya wangaphandle damper, xhuma enye yezimbobo zayo, eneshubhu, kokokufaka Okuphezulu ku-transducer esetshenziselwa ukusiza ingcindezi.
   • QAPHELA: Akunandaba, kulolu hlelo lokusebenza, iyiphi imbobo ye-pickup tube (H noma L) exhunywe kokufaka Okuphezulu kwe-transducer.
2. Okweshubhu yeveni efakwe ngaphakathi emoyeni wangaphandle damper, xhuma enye yezimbobo zayo, eneshubhu, kokokufaka Okuphansi ku-transducer esetshenziselwa ukusiza ingcindezi.
   • QAPHELA: Akunandaba, kulolu hlelo lokusebenza, iyiphi imbobo ye-pickup (H noma L) exhunywe kokokufaka okuphansi kwe-transducer.
   • QAPHELA: Amanye amachweba amashubhu amabili okuthwala ashiywe engaxhunyiwe futhi evuleleke emoyeni.

Ukuxhuma I-Airflow Pickup Tube ye-RAD Pressure Assist Application

Qedela lezi zinyathelo uma amashubhu amabili engeziwe wokuthwebula we-SSS-1000 efakiwe endaweni yomoya obuyayo damper for pressure help.

1. Okweshubhu lokuthwala elibekwe ohlangothini olungenhla lomfula womoya obuyayo damper, xhuma enye yezimbobo zayo, eneshubhu, kokokufaka Okuphezulu ku-transducer esetshenziselwa ukusiza ingcindezi.
   • QAPHELA: Akunandaba, kulolu hlelo lokusebenza, iyiphi imbobo ye-pickup tube (H noma L) exhunywe kokufaka Okuphezulu kwe-transducer.
2. Okweshubhu lokuthwala elibekwe ezansi nomfula (okungukuthi umoya oxubile) ohlangothini lomoya obuyayo damper, xhuma enye yezimbobo zayo, eneshubhu, kokokufaka Okuphansi ku-transducer esetshenziselwa ukusiza ingcindezi.
   • QAPHELA: Akunandaba, kulolu hlelo lokusebenza, iyiphi imbobo ye-pickup (H noma L) exhunywe kokokufaka okuphansi kwe-transducer.
   • QAPHELA: Amanye amachweba amashubhu amabili okuthwala ashiywe engaxhunyiwe futhi evuleleke emoyeni.

Ukuxhumanisa I(ama) Pressure Transducer kusilawuli

1. Xhuma intambo yesiginali ukusuka ku-OUT kusidluliseli somoya wokunikezela ku-UI9 kusilawuli.
2. Uma ufaka i-transducer yesibili ye-(OAD noma i-RAD) yezinhlelo zokusebenza zosizo lokucindezela, xhuma intambo yesiginali ukusuka ku-OUT ku-transducer yesibili ukuya ku-UI10 kusilawuli.

Okwe-TRF-9311C(E)-AFMS

• QAPHELA: Sebenzisa 1/4 intshi (6.35 mm) FR amashubhu. Amashubhu akufanele abe ngaphezu kwamafidi angu-20 (amamitha angu-6).

1. Susa amapulagi okuthumela amnyama kuzimbobo ze-PRESSURE SENSOR.
2. Ngokufaka amashubhu, xhuma i-Port Hs yawo wonke amashubhu okulandwayo ngokuhambisana ku-loop, bese uxhuma embobeni OKUPHEZULU kusilawuli.
3. Ngokufaka amashubhu, xhuma i-Port Ls yawo wonke amashubhu okulandwayo ngokuhambisana ku-loop, bese uxhuma embobeni OKUPHANSI kusilawuli.

Ixhuma i-Inclinometer

1. Xhuma intambo yesiginali ephuzi ye-inclinometer ku-UI7 kusilawuli.
2. Xhuma intambo yesiginali eluhlaza ye-inclinometer ku-UI8 kusilawuli.
3. Xhuma intambo eluhlaza okwesibhakabhaka ye-inclinometer ku-GND (phakathi kwe-UI7 ne-UI8) kusilawuli.
4. Xhuma intambo yamandla ebomvu ye-inclinometer ku-UO8 (ye-TRF-5901C[E]-AFMS) noma i-U10 (ye-TRF- 9311C[E]-AFMS).

Ixhuma inzwa yangaphandle yezinga lokushisa lomoya

• QAPHELA: Sebenzisa izintambo ezivikelwe ze-AWG eziyi-18 kuye kwezingu-24 kukho konke ukuxhumana. Ungazibeki izintambo zedivayisi kumsele ofanayo onezintambo ezisetshenziselwa ukuhlinzeka ngemithwalo ye-inductive efana namamotho.

1. Phakela intambo ezoya kusilawuli se-AFMS ngembobo engezansi.
2. Yenza uxhumano emithonjeni yezintambo ezimbili nge-butt-splices noma i-solder. (Ukusebenzisa amantongomane ocingo akunconywa.)
   • QAPHELA: Inzwa enezintambo ezimbili ayizweli ku-polarity.
3. Xhuma ipayipi nge-sealant ukuze uvimbele ukungena komoya.
4. Swayipha umnyango uvaliwe kuze kube yilapho uxhumeke ngokuphephile.
5. Uma ufisa ukuvikeleka okwengeziwe, faka izikulufu ezimbili (ezinikeziwe) kumathebhu ahlanganisiwe wezikulufu zomnyango.
6.  Xhuma intambo yesiginali yenzwa ku-UI4 kusilawuli.
7. Xhuma intambo yaphansi yenzwa ku-GND (eduze kwe-UI4) kusilawuli.

Ixhuma Inzwa Yokubuya Kwezinga Lokushisa Lomoya

• QAPHELA: Sebenzisa izintambo ezivikelwe ze-AWG eziyi-18 kuye kwezingu-24 kukho konke ukuxhumana. Ungazibeki izintambo zedivayisi kumsele ofanayo onezintambo ezisetshenziselwa ukuhlinzeka ngemithwalo ye-inductive efana namamotho.

1. Phakela intambo ezoya kusilawuli se-AFMS ngembobo engezansi (uma ikhona).
2.  Yenza uxhumano emithonjeni yezintambo ezimbili nge-butt-splices noma i-solder. (Ukusebenzisa amantongomane ocingo akunconywa.)
   • QAPHELA: Inzwa enezintambo ezimbili ayizweli ku-polarity.
3. Xhuma ipayipi nge-sealant ukuze uvimbele ukungena komoya.
4. Swayipha isicabha (uma sikhona) sivaliwe size sixhunywe ngokuvikelekile.
5. Uma ufisa ukuthola ukuvikeleka okwengeziwe (futhi uma kusebenza), faka izikulufu ezimbili (ezinikeziwe) kumathebhu ahlanganisiwe wezikulufu zomnyango.
6. Xhuma intambo yesiginali yenzwa ku-UI5 kusilawuli.
7. Xhuma intambo yaphansi yenzwa ku-GND (eduze kwe-UI5) kusilawuli.

Ixhuma inzwa yezinga lokushisa lomoya elixubile

• QAPHELA: Sebenzisa izintambo ezivikelwe ze-AWG eziyi-18 kuye kwezingu-24 kukho konke ukuxhumana. Ungazibeki izintambo zedivayisi kumsele ofanayo onezintambo ezisetshenziselwa ukuhlinzeka ngemithwalo ye-inductive efana namamotho.

1. Phakela intambo ezoya kusilawuli se-AFMS ngembobo engezansi.
2. Yenza uxhumano emithonjeni yezintambo ezimbili nge-butt-splices noma i-solder. (Ukusebenzisa amantongomane ocingo akunconywa.)
   • QAPHELA: Inzwa enezintambo ezimbili ayizweli ku-polarity.
3.  Xhuma ipayipi nge-sealant ukuze uvimbele ukungena komoya.
4. Swayipha umnyango uvaliwe kuze kube yilapho uxhumeke ngokuphephile.
   • QAPHELA: Uma ufisa ukuvikeleka okwengeziwe, faka izikulufu ezimbili (ezinikeziwe) kumathebhu ahlanganisiwe wesikulufu somnyango.
5. Xhuma intambo yesiginali yenzwa ku-UI6 kusilawuli.
6. Xhuma intambo yaphansi yenzwa ku-GND (eduze kwe-UI6) kusilawuli.

Ixhuma i-Proportional Actuator

Ukusebenzisa I-Actuator Ekhona Ekhona
QAPHELA:Landela inqubo ekulesi sigaba lapho ufaka i-AFMS kuyunithi esevele ine-actuator elinganayo, elawulwa esinye isilawuli, efakwe ngaphandle noma emoyeni damper.
ISEXWAYISO
Cisha i-actuator kanye nesinye isilawuli ngaphambi kokuthatha izinyathelo ezilandelayo!

1. Nqamula ku-actuator ekhona intambo yesiginali evela ekuphumeni kwesinye isilawuli.
2. Nqamula ku-actuator ekhona intambo yaphansi evela kwesinye isilawuli.
3. Xhuma intambo yesiginali (ephuma kwesinye isilawuli) iye ku-UI3 kusilawuli se-AFMS.
4. Xhuma intambo yaphansi (ephuma kwesinye isilawuli) kutheminali ye-GND (eduze kwe-UI3) kusilawuli se-AFMS.
5.  Qalisa intambo yesiginali entsha - ukusuka ku-UO7 ku-TRF-5901-AFMS, noma ukusuka ku-UO9 ku-TRF-9311-AFMS - uye kutheminali yesiginali ku-actuator.
6.  Xhuma intambo evamile yesignali yaleyo ntambo entsha (esontekile) kutheminali ye-GND (eduze kwe-UO7/UO9) kusilawuli se-AFMS.

Kusetshenziswa I-Actuator Entsha Ye-Proportional

Ukuze uthole imiyalelo yokuthi ungafaka kanjani intambo kumodeli yakho ye-actuator kusilawuli:

1. Chofoza imodeli efanele ohlwini, noma useshe kokuthi Izilawuli ze-KMC webindawo:
   • I-MEP-4552
   • I-MEP-4952
   • I-MEP-7552
2. Finyelela kumhlahlandlela wokufaka otholakala ekhasini lomkhiqizo laleyo modeli.
3. Landela yonke imiyalelo yokufaka izintambo kusilawuli esebenza kumodeli yakho ye-actuator.
   • QAPHELA: Ukuze uthole ulwazi ngokuthi yikuphi okokufaka nokukhishwayo kwesilawuli okuxhunywe kukho, bheka Imidwebo Yezintambo ekhasini 22 kanye Nezinto Zokufaka/Okukhiphayo/Izixhumi.

Ixhuma Amanethiwekhi

Ixhuma Inethiwekhi ye-Ethernet
Kumamodeli we-“E” kuphela, xhuma ikhebuli yesichibi se-Ethernet embobeni engu-10/100 ETHERNET.
ISEXWAYISO

• UNGAYIxhumi ikhebula elenzelwe ukuxhumana kwe-Ethernet embobeni Yenzwa Yegumbi! Imbobo ye-Room Sensor inika amandla i-NetSensor. Umqulu onikeziwetagingalimaza iswishi ye-Ethernet noma irutha.
  QAPHELA: Ikhebuli yokuchibiyela ye-Ethernet kufanele ibe yi-T568B Isigaba 5 noma okungcono futhi ibe umkhawulo wamafidi angu-328 (amamitha angu-100) phakathi kwamadivayisi.
  QAPHELA: Amamodeli we-“E” anikwe amandla yi-Ethernet ane-firmware yakamuva angalungiselelwa nge- web isiphequluli esisuka emakhasini anikezwa ngaphakathi kwesilawuli. Izilawuli zinamavelu ekheli lenethiwekhi alandelayo:
  • Ikheli lasesizindeni se-inthanethi—192.168.1.251
  • Imaski ye-subnet—255.255.255.0
  • Isango—192.168.1.1

Ixhuma Inethiwekhi ye-MS/TP

1. 1. Nge-TRF-5901C-AFMS noma i-TRF-9311C-AFMS, xhuma inethiwekhi ye-BACnet kubhulokhi yetheminali empunga ye-BACnet MS/TP.
   • QAPHELA: Sebenzisa ikhebula elisontekile elingu-18 gauge AWG elinamandla amakhulu angama-51 picofarad ngonyawo (amamitha angu-0.3) kuzo zonke izintambo zenethiwekhi (intambo ye-Belden #82760 noma efanayo).
     • A. Xhuma amatheminali e--A ngokuhambisana nawo wonke amanye amatheminali angu-A kunethiwekhi.
     • B. Xhuma amatheminali +B ngokuhambisana nawo wonke amanye amatheminali +B kunethiwekhi.
     • C. Xhuma izihlangu zekhebula ndawonye kudivayisi ngayinye usebenzisa i-wire nut noma i-S terminal.
2. Xhuma isihlangu sekhebula endaweni ekahle yomhlaba endaweni eyodwa kuphela.
   • QAPHELA: Ukuze uthole izimiso nezinqubo ezinhle lapho uxhuma inethiwekhi ye-MS/TP, bheka Ukuhlela Amanethiwekhi e-BACnet (Isaziso Sohlelo AN0404A).
3.  Uma isilawuli sisekupheleni kwenethiwekhi ye-BACnet MS/TP (intambo eyodwa kuphela ngaphansi kwamatheminali), vula iswishi ye-EOL.
   • QAPHELA: Iswishi ye-EOL ithunyelwa isuka efekthri isendaweni ethi OFF.

Amandla okuxhuma

Ixhuma Amandla kusilawuli

Ukuze uxhume i-24 VAC, i-transformer ye-Class-2 kubhulokhi yetheminali yamandla amnyama yesilawuli:

1. Xhuma uhlangothi olumaphakathi lwe-transformer kutheminali evamile yesilawuli ⊥ .
2. Xhuma ingxenye yesigaba se-AC se-transformer kutheminali yesigaba sesilawuli ∼ .
   • QAPHELA: Xhuma isilawuli esisodwa kuphela ku-24 VAC ngayinye, i-transformer ye-Class-2 enentambo yethusi engu-12–24 AWG.
   • QAPHELA: Sebenzisa izintambo zokuxhuma ezivikelwe noma uvale zonke izintambo kumsele ukuze ugcine imininingwane yokukhishwa kwe-RF.
   • QAPHELA: Ukuze usebenzise ukunikezwa kwamandla e-DC esikhundleni se-AC, bheka isigaba esithi “Amandla (Isilawuli)” se-KMC Conquest Controller Application Guide.

Ixhuma Amandla ku-Inclinometer

1. Xhuma intambo yamandla ebomvu ye-inclinometer ku-UO8 ukuze uthole i-TRF-5901-AFMS, noma i-UO10 ye-TRF-9311-AFMS.
2. Xhuma intambo eluhlaza okwesibhakabhaka ye-inclinometer ku-GND/SC kusilawuli.

Ukuxhuma Amandla Ku-Pressure Transducer

• • QAPHELA: Qedela lezi zinyathelo kuphela uma usebenzisa isilawuli se-TRF-5901C(E)-AFMS.
  • QAPHELA: Sebenzisa okungenani i-22 AWG, izintambo ezivikelekile, ezisontekile kukho konke ukuxhumana. Ungazibeki izintambo zedivayisi kumsele ofanayo onezintambo ezihlinzeka ngemithwalo ye-inductive.

ISEXWAYISO
Lapho ugxilisa okwesibili kwesiguquli se-AC noma uma ufaka izintambo kumadivayisi amaningi, qinisekisa ukuthi indawo ephansi yesekethe iyafana kuwo wonke amadivayisi nesilawuli.

1. Xhuma itheminali yesigaba sesilawuli ∼ kutheminali ye-PWR ye-transducer.
2. Xhuma itheminali evamile yesilawuli ⊥ kutheminali ye-COM ku-transducer.
3. Uma kukhona i-transducer yesibili yezinhlelo zokusebenza zokusiza ingcindezi, phinda izinyathelo 1 no-2 zaleyo transducer.

Ukuxhuma Amandla ku-Proportional Actuator
Ukuze uthole imiyalelo yokuthi ungawafaka kanjani amandla futhi uqedele ukusethwa kwemodeli yakho ye-actuator:

1.  Khetha imodeli efanelekile ohlwini, noma useshe kokuthi Izilawuli ze-KMC webindawo:
   • I-MEP-4552
   • I-MEP-4952
   • I-MEP-7552
2. Finyelela kumhlahlandlela wokufaka otholakala ekhasini lomkhiqizo laleyo modeli.
3. Landela yonke imiyalelo ekufakeni izintambo emandleni kanye nokusetha okusele okusebenza kumodeli yakho ye-actuator.

Amandla omlawuli kanye nesimo sokuxhumana

Izimo ze-LED ku-TRF-5901-AFMS kanye ne-TRF-9311-AFMS zibonisa ukuxhumeka kwamandla nokuxhumana kwenethiwekhi. Izincazelo ezingezansi zichaza umsebenzi wabo ngesikhathi sokusebenza okuvamile (okungenani amasekhondi angu-5 kuya kwangu-20 ngemva kokunika amandla/ukuqalisa noma ukuqalisa kabusha).

• QAPHELA: Uma kokubili i-LED eluhlaza READY LED kanye ne-amber COMM LED kuhlala KUVALIWE, hlola amandla noxhumo lwekhebula kusilawuli.

Green READY LED
Ngemva kokunika amandla isilawuli noma ukuqalisa kabusha sekuqediwe, i-READY LED ibaneka kancane kancane kanye ngomzuzwana, okubonisa ukusebenza okuvamile.
I-Amber (BACnet MS/TP) I-COMM LED

• Ngesikhathi sokusebenza okuvamile, i-COMM LED iyacwayiza njengoba isilawuli samukela futhi sidlulisela ithokheni kunethiwekhi ye-BACnet MS/TP.
• Uma inethiwekhi ingaxhumekile noma ukuxhumana kahle, i-COMM LED ibaneka kancane (cishe kanye ngesekhondi).

I-LED ye-ETHERNET eluhlaza

QAPHELA: Ama-LED wesimo se-Ethernet akhombisa ukuxhumana kwenethiwekhi nesivinini sokuxhumana.

• I-Ethernet LED eluhlaza ihlala IVULIWE lapho isilawuli sixhumana nenethiwekhi.
• I-Ethernet LED eluhlaza IVALIWE uma isilawuli (esinamandla) singaxhumani nenethiwekhi.

I-Amber ETHERNET LED

• I-amber Ethernet LED iyakhanya lapho isilawuli sixhumana nenethiwekhi ye-100BaseT Ethernet.
• I-amber Ethernet LED ihlala IVALIWE lapho isilawuli (esinamandla) sixhumana nenethiwekhi ngo-10 Mbps kuphela (esikhundleni sika-100 Mbps).

Isilawuli se-MS/TP Network Isolation Bulbs
Ama-bulb amabili okuhlukanisa amanethiwekhi enza imisebenzi emithathu:

• Ukukhipha (i-HPO-0055) ukuhlanganiswa kwe-bulb kuvula isekethe ye-MS/TP futhi kuhlukanise isilawuli kunethiwekhi.
• Uma i-bulb eyodwa noma womabili IVULIWE, inethiwekhi imiswa ngezigaba ngendlela engafanele. Lokhu kusho ukuthi amandla aphansi esilawuli awafani nezinye izilawuli kunethiwekhi. Uma lokhu kwenzeka, lungisa i-wiring.
• Uma i-voltagI-e noma i-current kunethiwekhi idlula amazinga aphephile, ama-bulb aqhuma, avule isifunda. Uma lokhu kwenzeka, lungisa inkinga bese ushintsha i-bulb

AMANOTHI:

1. Izilungiselelo zesilawuli kufanele ziqale zisethwe kusetshenziswa i-STE-9XX1.
2. Bheka Imihlahlandlela Yokukhetha, Ukufakwa kanye Nezicelo ye-AFMS ukuze uthole imininingwane eyengeziwe yokufaka.
3. Bheka www.kmccontrols.com ukuze uthole izesekeli kanye nemininingwane eyengeziwe.

AMANOTHI:

1. Izilungiselelo zesilawuli kufanele ziqale zisethwe kusetshenziswa i-STE-9XX1.
2. Bheka Imihlahlandlela Yokukhetha, Ukufakwa kanye Nezicelo ye-AFMS ukuze uthole imininingwane eyengeziwe yokufaka.
3. Bheka www.kmccontrols.com ukuze uthole izesekeli kanye nemininingwane eyengeziwe.

AMANOTHI:

1. Izilungiselelo zesilawuli kufanele ziqale zisethwe kusetshenziswa i-STE-9XX1.
2. Bheka Imihlahlandlela Yokukhetha, Ukufakwa kanye Nezicelo ye-AFMS ukuze uthole imininingwane eyengeziwe yokufaka.
3. Bheka www.kmccontrols.com ukuze uthole izesekeli kanye nemininingwane eyengeziwe.

Okokufaka/Okukhiphayo Izinto/Izixhumanisi

TRF-5901C(E)-AFMS
Okokufaka
I-AI1	Inzwa yesikhala (embobeni Yenzwa Yegumbi)
I-AI2	I-Space Setpoint Offset (ethekwini)
I-AI3/UI3	Okungenayo Damper Isiginali
I-AI4/UI4	I-Outdoor Air Temp
I-AI5/UI5	Buyisela I-Air Temp
I-AI6/UI6	I-Mixed Air Temp
I-AI7/UI7	I-Inclinometer V1
I-AI8/UI8	I-Inclinometer V2
I-AI9/UI9	Faka i-Air Pressure Transducer
I-AI10/UI10	I-Transducer eyengeziwe (uma usizo lwengcindezi lukhona okudingekayo)
Imiphumela
I-AO6/UO6	0-10 Okukhiphayo kwe-VDC CFM
I-AO7/UO7	I-Outdoor Air Damper
I-AO8/UO8	Amandla e-Inclinometer
BO1	Okukhipha kanambambili #1
BO2	Okukhipha kanambambili #2
BO3	Okukhipha kanambambili #3
BO4	Okukhipha kanambambili #4
BO5	Okukhipha kanambambili #5

 

TRF-9311C(E)-AFMS
Okokufaka
I-AI1	Inzwa yesikhala (embobeni Yenzwa Yegumbi)
I-AI2	I-Space Setpoint Offset (ku ichweba)
I-AI3/UI3	Okungenayo Damper Isiginali
I-AI4/UI4	I-Outdoor Air Temp
I-AI5/Ui5	Buyisela I-Air Temp
I-AI6/UI6	I-Mixed Air Temp
I-AI7/UI7	I-Inclinometer V1
I-AI8/UI8	I-Inclinometer V2
I-AI9	Inzwa Yokucindezela Okuhlukile (kuhlanganisiwe ichweba)
Imiphumela
I-AO7/UO7	I-Analog Output #7
I-AO8/UO8	0-10 Okukhiphayo kwe-VDC CFM
I-AO9/UO9	I-Outdoor Air Damper
I-AO10/UO10	Amandla e-Inclinometer
BO1	Okukhipha kanambambili #1
BO2	Okukhipha kanambambili #2
BO3	Okukhipha kanambambili #3
BO4	Okukhipha kanambambili #4
BO5	Okukhipha kanambambili #5
BO6	Okukhipha kanambambili #6

Ukuhlela nokusebenza

Ngethuluzi ngalinye elisetshenziselwa ukulungisa nokusebenzisa i-AFMS, bheka imibhalo etholakala ekhasini lomkhiqizo lethuluzi.

Ulwazi Olwengeziwe

Izinto ezikulo mbhalo ezezinjongo zolwazi kuphela. Okuqukethwe kanye nomkhiqizo owuchazayo kungashintsha ngaphandle kwesaziso. I-KMC Controls, Inc. awenzi izethulo noma iziqinisekiso maqondana nalo mbhalo. Akukho mcimbi lapho i-KMC Controls, Inc. izobophezeleka kunoma yimuphi umonakalo, oqondile, noma wengozi, ovela ngenxa noma ohlobene nokusetshenziswa kwalo mbhalo. Ilogo ye-KMC wuphawu lokuthengisa olubhalisiwe lwe-KMC Controls, Inc. Wonke amalungelo agodliwe. Uhlelo lokusebenza lwe-KMC Connect Lite™ lokucushwa kwe-NFC livikelwe ngaphansi kweNombolo Yelungelo Lobunikazi lase-United States 10,006,654.
Pat. https://www.kmccontrols.com/patents/
TEL: 574.831.5250
I-FAX: 574.831.5252
I-IMEYILI: info@kmccontrols.com

Imibuzo Evame Ukubuzwa

Q: Kufanele ngixhume kanjani i-Airflow Pickup Tubes?

• A: Xhuma amashubhu okulanda komoya ngokulandela imiyalelo enikezwe kumanuwali yomsebenzisi. Qinisekisa ukuqondanisa okufanele kanye nokuxhumana okuvikelekile ukuze ugweme amaphutha okulinganisa.

Q: Imaphi amanethiwekhi engingaxhuma kuwo izingxenye zesistimu?

• A: Ungakwazi ukuxhuma izingxenye zesistimu kunethiwekhi ye-Ethernet noma inethiwekhi ye-MS/TP. Landela imihlahlandlela eshiwo yohlobo ngalunye lwenethiwekhi ukuze uthole ukuhlanganiswa okufanele.

Amadokhumenti / Izinsiza

I-KMC ILAWULA Isistimu Yokulinganisa Ukugeleza Komoya kwe-TrueFit [pdf] Incwadi Yeziqondiso AFMS_92501907C, TrueFit Airflow Measurement System, TrueFit, Airflow Measurement System, Measurement System, System

Izithenjwa

• Imaniwali yosebenzisayo