I-ANALOG MULTITESTER KF-23
INCWADI YOMYALELO
Inkampani KAISE CORPORATION

I-KF-23 I-Analog Multi Tester

NGEZILINGANISO ZOKUPHEPHA!!
Ukuze uvimbele ingozi yokushaqeka kagesi ku-opharetha kanye/noma ukulimala kwezinsimbi, funda le miyalo ngokucophelela ngaphambi kokusebenzisa ithuluzi.
IZIXWAYISO ngophawu ensimbini kanye nale ncwadi yeziqondiso ibaluleke kakhulu.
Izimpawu Ezibalulekile :
Uphawu olusohlwini lwe-IEC 61010-1 kanye ne-ISO 3864 lusho ukuthi “Isixwayiso (bheka imanuwali yeziqondiso)”.
ISEXWAYISO
Uphawu olukuleli bhukwana lweluleka umsebenzisi ngengozi yokushaqeka kagesi engaholela ekulimaleni okubi kakhulu noma ngisho nokufa.
ISEXWAYISO
Uphawu olukuleli bhukwana lweluleka umsebenzisi ngengozi yokushaqeka kagesi engabangela ukulimala noma ukulimala kwezinto.
ISEXWAYISO
Ungawulinganisi Ulayini Wamandla Aphezulu (Ama-High Energy Circuits). I-High Power Line iyingozi kakhulu futhi ngezinye izikhathi ihlanganisa i-High Surge Voltage okungase kubangele ukuqhuma kufushane ensimbini futhi kungaholela ekulimaleni okubi ku-opharetha. Leli thuluzi ele-Low Power Linemeasurement. Ngisho Nakulayini Wamandla Aphansi, qaphela lapho ukala ivolumu ephezulutage line.
ISINGENISO
Siyabonga ngokuthenga i-KAISE “KF-23 ANALOG MULTITESTER”. Ukuze uthole ukusebenza okuphezulu kwaleli thuluzi, funda le Manuwali Yemiyalo ngokucophelela, bese uthatha isikali esiphephile.

UKUKHIPHA NOKUHLOLA

Qinisekisa uma izinto ezilandelayo ziqukethwe kuphakheji zisesimweni esihle.
Uma kukhona umonakalo noma izinto ezingekho, cela umthengisi wangakini ukuthi akushintshe.

1. I-Analog Multitester 1 pce.
2. I-Test lead (100-64) isethi engu-1
3. Ikesi eliphethe (1020) 1 pce.
4. Ibhethri (1.5V R6P) 2 ama-pcs.
5. Incwadi Yeziqondiso 1 pce.

IMICIMBI

2-1. IMICIMBI EJWAYELEKILE

1. ISIBONISO:Imitha ye-Analog (Pivot-uhlobo 42μA)
2. UKUVIKELELWA KWE-METER: Ukuvikelwa kokulayisha ngokweqile nge-diode
3. UKUVIKELELWA KWE-CIRCUIT:0.75A/250V ukuvikelwa kwe-fuse ye-mA, kanye nobubanzi bokumelana ngokumelene nevolthi ephezulutage kufika ku-250V AC wokunikezwa kwamandla okuhweba.
4. UKUKHETHA UHLANGA: Ukulinganisa ngokuzenzela
5. UKUNIKEZWA KWAMANDLA:1.5V R6P (AA) ibhethri x 2
6. IFUSE:0.75A/250V (5.2φ×20mm) x 1
7. UBULINGANISO NEsisindo:136(H)×90(W)×30(D)mm, Cishe. 230g
8. IZINTO:100-64 Test lead, 1020 Carrying Cace, 1.5V R6P (AA) ibhethri x 2, F15 Spare Fuse (0.75A/250V) x 1 (ngaphakathi kwekesi), Incwadi Yomyalelo
9. IZINTO ONGAZITHANDELA:100-41 Test Lead Kit, 100-62 Test lead Set, 940 alligator Cilps, 948 alligator Clip, 793 Coil-Type Contact Pin

2-2. INGCACISO YESILINGANISO

Izinto Zokukala	Ibanga Lokulinganisa	Ukubekezelelana
I-DC Voltage (DC.V)	0.3V/3V/12V/30V/120V/300V/1200V	± 3% isikali esigcwele
I-AC Voltage (AC.V)	12V/30V/120V/300V/1200V	± 4% isikali esigcwele
I-DC Yamanje (DC.mA/A)	60μA/3mA/30mA/600mA/12A ※1	± 3% isikali esigcwele
Izinto Zokukala	Ibanga Lokulinganisa	Ukubekezelelana
Ukumelana ( Ω )	5kΩ/50kΩ/5MΩ (×1/×10/×1k)	±3% fs ubude
Ukuqhubeka (  )	I-Buzzer cishe. 50Ω ukuya ku-1000Ω noma ngaphansi	-
Ukuhlolwa kwebhethri okungu-1.5V	0.9V ukuya ku-1.6V : 50mA umthwalo (ku-1.5V)	-
I-Decibel (dB)	－10 kuya ku-＋23, 31, 43, 51, 63dB	-
I-LEDTest	Ukuhlolwa kokukhanyisa kwe-LED ebangeni elingu-Ω×10	-

Ukumelana Kwangaphakathi : DC Voltage 20kΩ/V, AC Voltage 10kΩ/V
※QAPHELA 1 : Ukulinganisa okuqhubekayo kububanzi obungu-12A DC kukhawulelwe kufika kumasekhondi angu-30.
Kudingeka isikhawu esingaphezu kweminithi elingu-1 esilinganisweni esilandelayo.

IZIVIVINYO ZOKUPHEPHA

Ulwazi olulungile lwezilinganiso zikagesi lubalulekile ukuze kuvinjelwe ingozi engalindelekile njengokulimala komsebenzisi noma ukulimala kwethuluzi. Funda izinyathelo zokuphepha ezilandelayo ngokucophelela ukuze uthole izilinganiso zokuphepha.
3-1. IZIXWAYISO
ISEXWAYISO 1. Ukuhlolwa Kwensimbi kanye Nemikhombandlela Yokuhlola Ngaphambi kokulinganisa, hlola ukuthi akukho yini umonakalo ensimbini kanye nemikhondo yokuhlola. Uthuli, amafutha kanye nomswakama kumele kususwe.
ISEXWAYISO 2. Ukwenqatshelwa kokukalwa kolayini bamandla aphezulu
Ungawulinganisi Ulayini Wamandla Aphezulu (Amasekhethi Amandla Aphezulu) njengama-Distribution Transformers, Amabha Amabhasi kanye nama-Large Motors. Ulayini Wamandla Ophakeme ngezinye izikhathi uhlanganisa i-High Surge Voltage engabangela isiqhumane sibe sifushane entweni futhi engabangela ingozi yokushaqeka. Ngokuvamile, ingozi yokushaqeka ingase yenzeke lapho i-current phakathi kwesekhethi, ehlanganisa okungaphezu kuka-30V AC noma 42.4V DC, futhi umhlabathi wenyuka ufinyelela ku-0.5mA noma ngaphezulu.
ISEXWAYISO 3. Isexwayiso seVoltage Isilinganiso Ngisho Nakumasekhethi Amandla Aphansi wezinto zikagesi/ zikagesi, njengezinto zokufudumeza, izinjini ezincane, izintambo zolayini namapulaki, Ivolthi Ephezulutage Izilinganiso ziyingozi kakhulu. Ukuze uvimbele ingozi yokushaqeka kukagesi, qaphela ukuthi ungathinti noma iyiphi ingxenye yesekhethi.
ISEXWAYISO 4. Isexwayiso Ngengozi Voltage Isilinganiso Ngomthamo ophezulu oyingozitage yokukala, qaphela ngokuqinile izixwayiso ngezansi (bheka Fig. 1).

• Ungalibambi ithuluzi ngezandla zakho.
• Gcina ibanga lokuphepha ukusuka kusekhethi ukuze ulinganiswe futhi ukuhlolwa kuholela ekutheni ungathinti ivolumu eyingozitage.
• Namathisela iziqeshana zengwenya emnyama nebomvu kumaphini wokuhola wokuhlola.
• Vala amandla wesekethe lapho uxhuma ukuhlolwa kuholela kumjikelezo ozokalwa.
• Ngemuva kokulinganisa, vala amandla wesekethe futhi futhi ukhiphe wonke ama-capacitor. Bese, khipha iziqeshana zengwenya (imikhondo yokuhlola) kusekethe.

Esimeni sokukalwa komugqa obukhoma, qaphela ngokucophelela izexwayiso ezingezansi : (bona isifanekiso 2)

• Ungalibambi ithuluzi ngezandla zakho.
• Gcina ibanga lokuphepha ukusuka kusekhethi ukuze likalwe ukuze ungathinti ivolthi eyingozitage.
• I-Black Test lead : Namathisela isiqeshana sengwenya emnyama futhi uxhume -- (umhlaba) ohlangothini lwesekhethi.
• Umkhondo wokuhlola obomvu : Xhuma ohlangothini ＋ (olulungile) lwesekhethi.

ISEXWAYISO 5. Isexwayiso Sokulinganiswa kwe-12A DC

1. Setha u-RANGE Shintshela ku-600/12A bese ufaka umthofu wokuhlola obomvu kutheminali engu-12A. (Faka umkhondo wokuhlola omnyama kutheminali ye-－COM.)
2. I-12A DC ububanzi abuvikelwe nge-fuse. Ungalinganisi noma yimaphi amandla angase adlule ku-12A ukuze uvimbele ingozi yokushaqeka kukagesi kanye nokulimala okukhulu kwethuluzi.
3. Ungalinganisi noma iyiphi ivolumutage ku-12A DC ububanzi obufana ＋/－ namatheminali ebhethri lemoto ngokuqondile (fig. 3), noma isokhethi yasendlini (fig. 4).

ISEXWAYISO 6. Ukukhetha Okulungile Kokushintsha Ububanzi Njalo qinisekisa ukuthi RANGE Ukushintsha kusethelwe endaweni efanele. Ungalinganisi noma iyiphi ivolumutage ngaphandle kobubanzi be-DC.V ne-AC.V.
ISEXWAYISO 7. Ubuningi Bokubhekwa Kokufaka
Ungalinganisi noma yiziphi izici ezingase zeqe amanani aphezulu abekiwe wobubanzi bokulinganisa ngakunye.
ISEXWAYISO 8. Ithimba Lokuhola Lokuhlola
Khipha ukuhlola okuholela kumjikelezo wokulinganisa ngaphambi kokushintsha RANGE Shintshela kwenye indawo noma ukhiphe ikesi elingemuva ukuze uthole ukushintshwa kwebhethri noma fuse.

3-2. IZIXWAYISO EZIJWAYELEKILE NEZEXWAYISO

ISEXWAYISO 1.
Izingane kanye nabantu abangenalo ulwazi olwanele mayelana nezilinganiso zikagesi akumele basebenzise leli thuluzi.
ISEXWAYISO 2.
Ungawulinganisi ugesi ungagqokile izicathulo ukuze uzivikele engozini yokushaqeka kagesi.
ISEXWAYISO 3.
Qaphela ukuthi ungalimali ngezikhonkwane zokuhlola ezibukhali.
ISEXWAYISO 1.
Kude ithuluzi ezimweni ezishisayo nezinomswakama njengasemotweni. Ungasebenzisi ukushaqeka komshini oqinile noma ukudlidliza.
ISEXWAYISO 2.
Ungalipholishe ikesi noma uzame ukulihlanza nganoma yiluphi uketshezi lokuhlanza njengophethiloli noma i-benzine. Uma kunesidingo, sebenzisa amafutha e-silicon noma uketshezi lwe-antistatic.
ISEXWAYISO 3. 
Khipha ibhethri uma insimbi ingasasebenzi isikhathi eside. Ibhethri eliphelile lingase livuze i-electrolyte futhi lonakele ngaphakathi.

IGAMA UMFANEKISO

4-1. Ukushintsha kwe-RANGE
Setha le swishi kububanzi ofuna ukubulinganisa. Lapho kulinganiswa umthamo ongaqinisekiletage noma yamanje, okokuqala isethwe kububanzi obuphakeme kakhulu ukuze kuhlolwe inani elilinganiselwe.
Ngemva kwalokho, kancane kancane shintshela ebangeni elifanele lokulinganisa.
Amathiphu okuthola ububanzi bokulinganisa obufanele
Khetha ububanzi ukuze ubonise isikhombi semitha ngakwesokudla kwesikali semitha. (phakathi kwesikhungo nesikali esiphezulu.)
ISEXWAYISO

• Ngaphambi kokuqala ukulinganisa, qinisekisa ukuthi I-RANGE Switch isethwe endaweni efanele. Ungalinganisi noma iyiphi ivolumutage ngaphandle kobubanzi be-DC.V ne-AC.V ukuze kuvinjwe ingozi yokushaqeka kukagesi kanye nokulimala okukhulu kwethuluzi.
• Ukuze uvimbele ingozi yokushaqeka kukagesi noma ukulimala okubi kakhulu ensimbini, khipha imikhondo yokuhlola ukusuka kusekethe yokulinganisa ngaphambi kokushintsha RANGE Shintshela kwenye indawo.

4-2. Isikali Semitha (Ifundwa kanjani)

1. Isikali se-DC/AC : AC/DC Voltage, DC Yamanje (V, μA, mA, A)
   Khetha isikali esifanele ukusuka ku-“0 – 6”, “0 – 12”, noma “0 – 30” ngokuya ngebanga lokulinganisa elikhethiwe usebenzisa ukuphindaphinda okuthile.
   Exampngaphansi : 0.3V DC ububanzi : Funda “0 – 30” isikali ngokuphindaphinda ngaso .
   120V DC ububanzi : Funda isikali esithi “0 – 12” ngokuphindaphinda ngo-10.
   60μA DC ububanzi : Funda isikali esithi “0 – 6” ngokuphindaphinda ngo-10.
   600mA DC ububanzi : Funda isikali esithi “0 – 6” ngokuphindaphinda ngo-100.
2. Ω Isikali : Ukumelana (Ω)
   Phindaphinda inani lesikali ngevelu yobubanzi bokulinganisa.
   Exampkancane :
   ×1 ububanzi : Funda inani lesikali ngokuqondile.
   ×10 ububanzi : Phindaphinda inani lesikali ngo-10.
   ×1k ububanzi : Phindaphinda inani lesikali ngo-1,000.
   3. 1.5V Isikali Sokuhlola Ibhethri
   Funda inani lesikali ngokuqondile ngomphumela wokuhlola (OKUHLE / BUYISELELA).
3. dB isikali
   12V AC ububanzi : funda inani lesikali ngokuqondile.
   Engeza ama-coefficients ngokulandelana kwawo kububanzi obungezansi;
   30V AC ububanzi : engeza 8, 120V AC ububanzi : engeza 20
   300V AC ububanzi : engeza 28, 1200V AC ububanzi : engeza 40

4-3. I-Meter Mirror (Indlela yokubona i-pointer)
Funda isikali semitha ukusuka endaweni lapho isikhombi semitha sangempela kanye nesithombe saso esibukweni kweqana.
Usebenzisa lesi sibuko, ungakwazi ukufunda imitha ngendlela efanele ukusuka uqonde ngaphezu kwesikhombisi, ugweme iphutha lokufunda lapho ubona imitha ukusuka e-oblique angle.
4-4. I-Zero Adjustment Screw
Sebenzisa ukuthatha ukulungisa uziro ku-Voltage kanye nezilinganiso zamanje. Hlola ukuthi imitha ikhomba kumugqa othi “0” ohlangothini lwesobunxele lwesikali se-DC/AC ngaphambi kokuqala ukulinganisa. Uma ingekho kulayini, vula Isikulufa Sokulungiswa Kweziro kuze kube yilapho imitha ikhomba ku-“0”. Lokhu kulungiswa kuyadingeka ukuze kufundwe ngokunembile.
4-5. 0Ω Inkinobho Yokulungisa
Sebenzisa ukuthatha u-0Ω ukulungisa ku-Resistance. Bheka ku-“5-5. Isilinganiso Sokumelana (Ω)” ukuze uthole imininingwane.
4-6. Amatheminali okokufaka ・ Imihlahlandlela yokuhlola
Faka umkhondo wokuhlola omnyama kutheminali ye-－COM, bese ufaka umthofu wokuhlola obomvu ku-＋ noma kutheminali engu-12A.
QAPHELA : Faka umkhondo wokuhlola obomvu kutheminali engu-12A ngesilinganiso esingu-12A DC. Kwezinye izilinganiso, yixhume kutheminali ＋.

IZINQUBO ZOKUKALA

5-1. UKULUNGISELELA UKUSETSHENZISWA
ISEXWAYISO

• Ungalinganisi ulayini wamandla aphezulu noma isifunda samandla aphezulu.
• Ungalinganisi noma iyiphi ivolumutage engase yeqe amanani afakiwe aphezulu ashiwo webanga ngalinye lokulinganisa.
• Ngaphambi kokuqala ukulinganisa, hlola ukuthi i-RANGE Switch isethwe endaweni efanele yini.
• Funda "3. IZINDLELA ZOKUPHEPHA" ngokucophelela ukuze uvimbele ingozi yokushaqeka kukagesi kanye nokulimala okukhulu kwethuluzi.

1. INCWADI YOMYALELO
   Funda IMANUWADI YEMIYALELO ngokucophelela ukuze uqonde ukucaciswa kanye nemisebenzi ngendlela efanele. “3. IZIQINISEKISO ZOKUPHEPHA” ibaluleke kakhulu ekukaleni ukuphepha.
2. IBHETHI
   Ngaphambi kokuqala ukulinganisa, faka ama-pcs angu-2 webhethri elingu-1.5V R6P ngokubhekisela kokuthi “6-1. UKUBUYEKEZWA KWEBHETRI KANYE NEFUSE”. Faka esikhundleni ngendlela efanayo lapho isiphelile.
3. I-FUSE
   Ububanzi obungu-30/600mA nobubanzi obungu-1Ω zivikelwe i-fuse engu-0.75A/250V.
   Ukuze uthole okunye esikhundleni, bheka okuthi “6-1. IBHETRI KANYE NEFUSE REPLACEMENT”.
4. AMANOTHI ESILINGANISO
   Ukuze uthole isilinganiso esinembile, qaphela amaphuzu alandelayo.

• Thatha imitha zero-ukulungiswa.
• Khetha ububanzi obufanele ngokubhekisela kokuthi “4-1. I-Range Switch”.
• Ukuze uvimbele iphutha lokufunda, funda isikali semitha siqonde ngenhla kwesikhombi semitha lapho isikhombi sangempela nesithombe saso esibukweni kweqana. (bheka “4-3. Isibuko samamitha)
• Ungalinganisi endaweni eqinile kazibuthe noma ku-ayina plate ukuze uvikele umsindo uthinteke ekufundeni imitha noma ukuzwela kwemitha.

5-2. DC VOLTAGI-E MEASUREMENT (DC.V)

1. Faka umthofu wokuhlola omnyama kutheminali ye-－COM, bese ufaka umthofu wokuhlola obomvu ku-＋ itheminali.
2. Setha RANGE Shintshela ebangeni lokulinganisa elidingekayo ku-DC.V.
   QAPHELA :
   Lapho kulinganiswa umthamo ongaqinisekiletage, okokuqala kala kububanzi obungu-1200V ukuze uhlole inani elilinganiselwe. Ngemva kwalokho, kancane kancane shintshela ebangeni elifanele lokulinganisa. Hlukanisa ukuhola kokuhlola kusukela kusekethe yokulinganisa ngaphambi kokushintsha Iswishi engu-RANGE.
3. Xhuma umkhondo wokuhlola omnyama － (umhlaba) ohlangothini lwesekhethi elinganiswayo futhi uxhume umthofu wokuhlola obomvu ohlangothini ＋ (olulungile).
   QAPHELA : Xhuma ithuluzi NGOKUXHUMANA nesekethe.
   QAPHELA : Sebenzisa iziqeshana zengwenya ukuze uthole ivolumu eyingozitage ukukala.
4. Funda inani lokulinganisa esikalini se-DC/AC ngokubhekisela kokuthi “4-2. Isikali semitha”.
5. Ngemuva kokulinganisa, khipha imikhondo yokuhlola kusekethe.

5-3. I-AC VOLTAGI-E MEASUREMENT (AC.V)

1. Faka umthofu wokuhlola omnyama kutheminali ye-－COM, bese ufaka umthofu wokuhlola obomvu ku-＋ itheminali.
2. Setha RANGE Shintshela ebangeni lokulinganisa elidingekayo ku-AC.V.
   QAPHELA :
   Lapho kulinganiswa umthamo ongaqinisekiletage, okokuqala kala kububanzi obungu-1200V ukuze uhlole inani elilinganiselwe. Ngemva kwalokho, kancane kancane shintshela ebangeni elifanele lokulinganisa. Hlukanisa ukuhola kokuhlola kusukela kusekethe yokulinganisa ngaphambi kokushintsha Iswishi engu-RANGE.
3. Xhuma umkhondo wokuhlola omnyama － (umhlaba) ohlangothini lwesekhethi elinganiswayo futhi uxhume umthofu wokuhlola obomvu ohlangothini ＋ (olulungile).
   QAPHELA : Xhuma ithuluzi NGOKUXHUMANA nesekethe.
   QAPHELA : Sebenzisa iziqeshana zengwenya ukuze uthole ivolumu eyingozitage ukukala.
4. Funda inani lokulinganisa esikalini se-DC/AC ngokubhekisela kokuthi “4-2. Isikali semitha”.
5. Ngemuva kokulinganisa, khipha imikhondo yokuhlola kusekethe.

5-4. ISILINGANISO SAMANJE se-DC (DC.μA/mA/A)
ISEXWAYISO

• Ungalinganisi noma yimaphi amanje angase adlule amanani aphezulu abekiwe wobubanzi bokulinganisa ngakunye. Ububanzi obungu-30/600mA buvikelwe ngefuse engu-0.75A/250V, kodwa ububanzi obungu-60μA/3mA/12A abuvikelekile.
• Ungalinganisi noma iyiphi ivolumutage kububanzi bamanje bokulinganisa ukuvimbela ingozi yokushaqeka kukagesi kanye nokulimala okukhulu kwethuluzi.

ISEXWAYISO NGESILINGANISO SE-DC 12A

• Setha U-RANGE Shintshela ku-600/12A isikhundla. Faka i-RED test lead ku-12A itheminali.
• I-12A DC ububanzi abuvikelwe nge-fuse. Ungalinganisi noma yimaphi amandla angase adlule ku-12A ukuze uvimbele ingozi yokushaqeka kukagesi kanye nokulimala okukhulu kwethuluzi.
• Ukulinganisa okuqhubekayo kububanzi obungu-12A DC kukhawulelwe kufika kumasekhondi angu-30. Kudingeka isikhawu esingaphezu kweminithi elingu-1 esilinganisweni esilandelayo.
• Ungalinganisi noma iyiphi ivolumutage ku-12A DC ibanga elifana ＋/－ namatheminali ebhethri lemoto ngokuqondile, noma isokhethi yasendlini yodonga.

1. Faka umthofu wokuhlola omnyama kutheminali ye-－COM, bese ufaka umthofu wokuhlola obomvu ku-＋ itheminali.
   QAPHELA : Uma ukala ibanga elingu-12A DC, faka umthofu wokuhlola obomvu kutheminali engu-12A.
2. Setha U-RANGE Shintshela ebangeni lokulinganisa elidingekayo ku-DC.mA/A.
   QAPHELA : Uma ukala ububanzi obungu-12A DC, setha U-RANGE Shintshela ku-600/12A isikhundla.
3. Vala amandla esekethe azolinganiswa. Vula isifunda ngemva kokukhipha ama-capacitor.
4. Xhuma umkhondo wokuhlola omnyama － (umhlaba) ohlangothini lwesekhethi elinganiswayo futhi uxhume umthofu wokuhlola obomvu ohlangothini ＋ (olulungile).
   QAPHELA : Xhuma insimbi IN SERIES kusekethe.
   QAPHELA : Sebenzisa iziqeshana zengwenya ukuthola isilinganiso samanje esiyingozi.
5. Vula amandla wesekhethi elinganiswayo.
6. Funda inani lokulinganisa esikalini se-DC/AC ngokubhekisela kokuthi “4-2. Isikali semitha”.
7. Vala umjikelezo olinganiswayo futhi ukhiphe wonke ama-capacitor. Ngemuva kwalokho, nqamula imikhondo yokuhlola kusuka kusekethe.
8. Ngemuva kokulinganisa, khipha imikhondo yokuhlola kusekethe.

5-5. ISILINGANISO SOKUMELANA (Ω)
ISEXWAYISO

• Ungalinganisi noma iyiphi ivolumutage kumabanga wokulinganisa ukumelana ukuvimbela ingozi yokushaqeka kukagesi kanye nokulimala okukhulu kwensimbi.
• Lapho ukala ukumelana kwe-in-circuit, vala isekethe ukuze ikalwe futhi ukhiphe wonke ama-capacitor.

1. Faka umthofu wokuhlola omnyama kutheminali ye-－COM, bese ufaka umthofu wokuhlola obomvu ku-＋ itheminali.
2. Setha U-RANGE Shintshela ebangeni lokulinganisa elidingekayo ngo-Ω.
3. Lapho ukala i-resistor exhunywe kumjikelezo, vala isifunda futhi ukhiphe wonke ama-capacitor.
4. Thatha Zero Ω Ukulungiswa.
   Isekhethi emfishane amaphinikhodi okuhlola okumnyama nokubomvu bese uvula i-0Ω Adjustment Knob kuze kube imitha ikhomba ku-“0” esikalini sika-Ω. Thatha uziro Ω ukulungisa futhi lapho ushintsha ububanzi bokulinganisa.
   QAPHELA :
   Ukulungiswa kukaziro Ω akusebenzi uma ibhethri seliphelile.
   Shintsha ibhethri bese uthatha uziro Ω ukulungisa futhi.
5. Nqamula uhlangothi olulodwa lwe-resistor ukuze lulinganiswe futhi uxhume ukuhlolwa okuholela kuzo zombili izinhlangothi.
6. Funda inani lokulinganisa esikalini sika-Ω ngokubhekisela kokuthi “4-2. Isikali semitha”.
7. Ngemuva kokulinganisa, khipha imikhondo yokuhlola kusekethe.

5-6. CONTINUITY TEST ( )

ISEXWAYISO

• Ungalinganisi noma iyiphi ivolumutage ebangeni lokuhlola ukuqhubeka ukuvimbela ingozi yokushaqeka kukagesi kanye nokulimala okukhulu kwethuluzi.
• Uma ukala ukuqhubeka kwe-in-circuit, vala i-circuit ukuze ikalwe futhi ukhiphe wonke ama-capacitor.

1. Faka umthofu wokuhlola omnyama kutheminali ye-－COM, bese ufaka umthofu wokuhlola obomvu ku-＋ itheminali.
2. Setha RANGE Shintshela ku-Bz isikhundla.
3. Uma ukala ukuqhubeka kwe-in-circuit, vala i-circuit ukuze ikalwe futhi ukhiphe wonke ama-capacitor.
4. Ukuhlolwa kokuxhuma kuholela kuzo zombili izinhlangothi zesekhethi ezokalwa. I-Buzzer izwakala uma ukumelana kwesekethe kungu-5Ω ukuya ku-1000Ωnoma ngaphansi.
   QAPHELA : Umsindo we-Buzzer uba mncane uma ibhethri seliphelile.
5. Ngemuva kokulinganisa, khipha imikhondo yokuhlola kusekethe.

5-7. 1.5V UKUHLOLA IBETHERI ( )

• Ukuze uvimbele ingozi yokushaqeka kukagesi kanye nokulimala okukhulu kwensimbi, ungahloli amabhethri amakhulu adlula ivolumu eshiwo.tage.
• Ungalihloli ibhethri lemoto.
• Ungalinganisi ivolumutage noma ukungena ububanzi.

Ungahlola izinga eliphelile lamabhethri angezansi;
Amabhethri ahlolekayo :
1.5V R20P (D), 1.5V R14P (C), 1.5V R6P (AA),
1.5V R03 (AAA)

1. Faka umthofu wokuhlola omnyama kutheminali ye-－COM, bese ufaka umthofu wokuhlola obomvu ku-＋ itheminali.
2. Setha RANGE Shintshela kububanzi.
3. Xhuma umkhondo wokuhlola omnyama － (umhlaba) ohlangothini lwebhethri bese uxhuma umthofu wokuhlola obomvu ohlangothini ＋ (olulungile).
4. Funda umphumela wokuhlola esikalini sokuhlolwa kwebhethri esingu-1.5V.
   INDAWO ENHLE (eluhlaza okwesibhakabhaka) : Ibhethri elihloliwe lisebenza kahle.
   buyisela indawo (ebomvu) : Ibhethri elihloliwe liphelile futhi lidinga ukushintshwa.
   QAPHELA : Ngisho nasendaweni ethi REPLACE (bomvu), ibhethri lingasetshenziselwa amathuluzi asebenzisa amandla amancane.
5. Ngemuva kokulinganisa, khipha imikhondo yokuhlola kusekethe.

5-8. ISILINGANISO SE-DECIBEL (dB)
Linganisa ngendlela efanayo “5-3. AC VOLTAGE ISILINGANISO (AC.V)”.
QAPHELA : Uma ukala isignali ye-AC equkethe izinto ze-DC ezibekwe phezulu, engeza i-capacitor engu-0.1µF (ivolumu elinganiselwetage 500V noma ngaphezulu) ekuxhumekeni kochungechunge.
QAPHELA : Lo mhloli uchaza i-0dB ngokususelwe ku-600Ω ukuvimbela isekethe yokulayisha ekusetshenzisweni kwamandla okungu-1mW (0.7746V ye-AC Vol.tagfuthi).
Lokhu kusho ukufunda inani lesikali ngokuqondile lapho ukala kububanzi obungu-12V AC ku-600Ω impedance yesekethe. Uma ukala ngobubanzi obungu-30V, 120V, 300A, kanye no-1200V AC, engeza ama-coefficient 8, 20, 28, 40 ngokulandelana kwawo kumanani esikali.
Uma ukungasebenzi kwesekethe kungeyona i-600Ω, ungakwazi ukubala inani langempela le-dB ngefomula yezibalo engezansi;

X＝I-dB yangempela Y＝Inani lokufunda esikalini se-dB. I-Z＝Impedance yesiyingi (Ω)

5-9. I-LED TEST (i-LED)
ISEXWAYISO

• Ungalinganisi noma iyiphi ivolumutage ebangeni le-LED TEST ukuvimbela ingozi yokushaqeka kagesi kanye nokulimala okukhulu kwethuluzi.
• Lapho ukala in-circuit LED, cisha isekethe ukuze ikalwe futhi ukhiphe wonke ama-capacitor.

1. Faka umthofu wokuhlola omnyama kutheminali ye-－COM, bese ufaka umthofu wokuhlola obomvu ku-＋ itheminali.
2. Setha U-RANGE Shintshela ku-× 10 LED kububanzi be-Ω.
3. Xhuma umkhondo wokuhlola omnyama － ohlangothini (iphinikhodi emfushane) ye-LED bese uxhuma umthofu wokuhlola obomvu ku-＋ ohlangothini (iphinikhodi ende).
4. Umphumela wokuhlolwa muhle uma i-LED ehloliwe ikhanya.
5. Uma kungenjalo, i-LED ilimele noma imikhondo yokuhlola ixhumeke ngokuhlehla.
6. Ngemuva kokulinganisa, khipha imikhondo yokuhlola kusekethe.

AMANDENI

6-1. IBHETRI KANYE NE-FUSE REPLACEMENT
ISEXWAYISO

• Ukuvikela ingozi yokushaqeka kagesi, qedela ukulinganisa ukuthi uzoyishintsha nini ibhethri nefuse.
• Hlukanisa imikhondo yokuhlola kusuka kumasekhethi wokulinganisa namatheminali okokufaka.
• Sebenzisa njalo i-fuse eshiwo. Ungasebenzisi lesi sibambi se-fuse esifushane noma ngaphandle kokusebenzisa i-fuse.

INCAZELO YEFUSE : 0.75A/250V (φ5.2×20mm)
Ibhethri liphelile : Ukulungiswa kukaziro Ω akusebenzi.
Ukuqhuma kwe-fuse: Ayikwazi ukukala ububanzi bamanje kanye nokumelana.
Shintsha ibhethri noma i-fuse uma iyunithi ifika ezimeni ezingenhla.

1. Qedela ukulinganisa futhi ukhiphe imikhondo yokuhlola kumatheminali okokufaka.
2. Khulula isikulufu ekesini elingemuva bese usivula ohlangothini lwemitha. Bese, isuse ishelela ohlangothini olungaphezulu.
3. Buyisela ibhethri eliphelile ufake ibhethri elisha elingu-1.5V R6P ngendlela efanele.
4. Lapho ushintsha i-fuse, susa i-fuse yokuqhumisa esibambi se-fuse bese uyibuyisela kwesisha.
5. Lungisa ikesi elingemuva ukusuka ohlangothini olungezansi bese uqinisa isikulufu.

QAPHELA : Khipha amabhethri uma insimbi ingasasebenzi isikhathi eside. Amabhethri aphelile angase avuze i-electrolyte futhi onakalise ngaphakathi.
6-2. UKUHLOLA NGESIKHATHI KANYE NOKULINGANISWA
Ukuhlola ngezikhathi ezithile nokulinganisa kuyadingeka ukwenza izilinganiso zokuphepha nokugcina ukunemba okucacisiwe. Isikhathi esinconyiwe sokuhlola kanye nokulinganisa kuba kanye ngonyaka nangemuva kwesevisi yokulungisa. Le sevisi itholakala e-KAISE AUTHORIZED SERVICE AGENCY ngokusebenzisa umdayisi wangakini.
6-3. LUNGISA
Isevisi yokulungisa iyatholakala e-KAISE AUTHORIZED SERVICE AGENCY ngomdayisi wangakini. Pakisha ithuluzi ngokuvikelekile ngegama lakho, ikheli, inombolo yocingo kanye nemininingwane yenkinga, bese uthumela okukhokhelwe kusengaphambili kumdayisi wangakini.

Hlola izinto ezilandelayo ngaphambi kokucela isevisi yokulungisa.

1. Hlola uxhumo lwebhethri, i-polarity, nomthamo.
2. Hlola ukuthi i-fuse ayiqhumi yini noma ayishiyi kumphathi we-fuse.
3. Qinisekisa ukuthi Ukushintsha kwe-RANGE kusethwe ngendlela efanele.
4. Qinisekisa uma okokufaka okungaphezulu, okudlula inani lobubanzi elishiwo, kungasetshenziswa.
5. Qinisekisa ukuthi ukunemba okukaliwe kwamukelwa endaweni yokusebenza.
6. Qinisekisa ukuthi umzimba waleli thuluzi nemikhondo yokuhlola ayinazo imifantu noma yimuphi omunye umonakalo.
7. Hlola ukuthi ithuluzi alithintwa yini umsindo onamandla okhiqizwe esisetshenziswa esizokalwa noma sokukala indawo ezungezile.

IWARANTI
I-KF-23 iqinisekiswa ngokuphelele ngokumelene nanoma yikuphi ukonakala kwempahla noma ukwenziwa komsebenzi ngaphansi kokusetshenziswa okujwayelekile nesevisi phakathi nenkathi yonyaka owodwa kusukela ngedethi yokuthengwa komthengi wangempela. Isevisi yewaranti iyatholakala e-KAISE AUTHORIZED SERVICE AGENCY ngomthengisi wangakini. Isibopho sabo ngaphansi kwalesi siqinisekiso sikhawulelwe ekulungiseni noma ekushintsheni i-KF-23 ebuyisiwe iphelele noma enesici esigunyazayo nobufakazi bokuthenga nezindleko zokuthutha ezikhokhelwa kusengaphambili. I-KAISE GUMUZED DEALER kanye nomkhiqizi, i-KAISE CORPORATION, ngeke bathweswe icala ngomonakalo owumphumela, ukulahlekelwa noma okunye. Iwaranti eshiwo ngenhla ikhethekile futhi esikhundleni sazo zonke ezinye iziqinisekiso ezihlanganisa noma isiphi isiqinisekiso sokuthengiselana, kungakhathaliseki ukuthi kushiwo noma kushiwo.
Lesi siqiniseko ngeke sisebenze kunoma yiliphi ithuluzi noma enye impahla eyobe isikhandiwe noma ishintshiwe ngaphandle kwe-KAISE AUTHORIZED SERVICE AGENCY, noma eye yaba ngaphansi kokusetshenziswa kabi, ubudedengu, ingozi, ukulungiswa okungalungile ngabasebenzisi, noma yikuphi ukufakwa noma ukusetshenziswa okungagunyaziwe. ngokuhambisana nemiyalelo enikezwe umenzi.

U-KAISE OGUNYAZIWE Umthengisi

Inkampani KAISE CORPORATION
422 Hayashinogo, Ueda City,
I-Nagano Pref., 386-0156 Japan
TEL : +81-268-35-1601
/ Ifeksi : +81-268-35-1603
I-imeyili : sales@kaise.com
http://www.kaise.com
Ukucaciswa komkhiqizo nokubukeka
zingashintsha ngaphandle kwesaziso ngenxa
ukuthuthukiswa okuqhubekayo.

Amadokhumenti / Izinsiza

I-KAISE KF-23 I-Analog Multi Tester [pdf] Iziyalezo KF-23, KF-23 Analog Multi Tester, KF-23, Analog Multi Tester, Multi Tester, Tester

Izithenjwa

• Imaniwali yosebenzisayo