Inzwa ye-Interface 3AR
Imininingwane Yomkhiqizo
- Igama Lomkhiqizo: Inzwa ye-3AR
- Umkhiqizi: Isixhumi esibonakalayo
- Ukukhweza Okuphezulu: Inkundla Yokulinganisa (uhlangothi olunyakazayo) kanye neStator
- Ukuqiniswa: Izikulufu zekhanda le-cylinder namaphinikhodi angama-cylindrical
- Isikulufa Ububanzi: M20
- I-Torque yokuqinisa:
- Ipulatifomu yokulinganisa: 8.8 / 400Nm, 10.9 / 550Nm, 12.9 / 700Nm
- Stator: 8.8 / 400Nm, 10.9 / 550Nm, 12.9 / 700Nm
- Izidingo Zokukhweza Surface:
- Ukuqina okuphezulu ngaphandle kokuguqulwa ngaphansi komthwalo
- I-Flatness: 0.05 kuya ku-0.1mm
- Ikhwalithi Yobuso: Rz6.3
Imiyalo yokusetshenziswa komkhiqizo
Ukukhweza Inkundla Yokulinganisa:
Ukusethwa kokulinganisa kufanele kunamathiselwe endaweni ekhwezayo yeplathifomu yokulinganisa yenzwa ye-3AR kusetshenziswa izikulufu zekhanda zesilinda namaphinikhodi angama-cylindrical.
Izinyathelo:
- Qinisekisa ukuthi indawo yokukhweza ihlangabezana nezidingo ezishiwo.
- Sebenzisa i-screw diameter efanele kanye ne-torque eqinisayo njengokusho kwetafula.
- Qinisa ukusetha ngezikulufu zekhanda lesilinda esingu-8x nendawo enamaphinikhodi angu-2x angama-cylindrical.
Ukukhweza i-Stator:
Inzwa ye-3AR kufanele inamathiselwe endaweni eyisikulufi ye-stator ngokulandela imihlahlandlela enikeziwe.
Izinyathelo:
- Lungiselela indawo ye-stator uqinisekise ukuthi ihlangabezana nezidingo ezishiwo.
- Sebenzisa izikulufu ezinconyiwe, izimbobo zokuphina, nama-torque aqinisayo njengoba kukhonjisiwe kumanuwali.
- Vikela inzwa ngezikulufu zekhanda lesilinda esingu-8x futhi uqondanise usebenzisa amaphinikhodi angu-2x cylindrical.
Amanothi Ajwayelekile:
- Ngaso sonke isikhathi bheka ithebula elinikeziwe ukuze uthole isigaba samandla nolwazi oluqinisayo lwetorque.
- Qinisekisa ukujula okulungile kwesikulufu kukho kokubili inkundla yokulinganisa kanye ne-stator.
- Landela izindinganiso ze-ISO zokubekezelela nokuqedwa kwendawo.
imibuzo ejwayelekile ukubuzwa
- Q: Ngingakwazi ukusebenzisa izikulufu ezahlukene ukukhweza inzwa?
A: Kunconywa ukusebenzisa izikulufu zekhanda le-cylinder ukuze ukhwezwe ukuze uqinisekise ukufakwa nokusebenza okufanele. - Q: Yini okufanele ngiyenze uma indawo yokukhweza ingahlangabezani ne- izimfuneko ezishiwo?
IMP: Kubalulekile ukuba nendawo yokukhweza eqinile neyisicaba. Uma ingahlangabezani nezidingo, thintana nochwepheshe ukuze ulungise indawo engaphezulu ngaphambi kokufaka. - Q: Ingabe kuyadingeka ukusebenzisa zonke izikulufi eziyi-8 zokubopha?
A: Yebo, kubalulekile ukusebenzisa zonke izikulufu zekhanda ezingamasilinda angu-8 ukuze unamathisele ngokuvikelekile inzwa ezindaweni ezikhwezwayo.
Ukufakwa kwe-3AR:
Sicela uqaphele imiyalo elandelayo yokufaka imikhiqizo ye-3AR evela ku-Interface. Ukuze kufakwe okuphrofeshinali, inzwa ye-3AR kufanele inamathiselwe ezindaweni ezikhethekile ezimakwe ngezikulufu.
Ipulatifomu yokulinganisa indawo ekhuphukayo
I-stator yendawo ekhuphukayo
Izidingo zokukhuphuka kwendawo
- ukuqina okuphezulu kwe-screwing surface, akukho deformation ngaphansi komthwalo
- Ukucaba kwendawo yokujiya 0.05 kuya ku-0.1mm
- Ikhwalithi yobuso bendawo yokujiya Rz6.3
| Inombolo | Ukuqokwa | Isigaba samandla/ Itorque eqinisayo (Nm) Ipulatifomu yokulinganisa | Ikilasi lamandla/ I-torque eqinisayo (Nm) Stator |
| 8 | Isikulufu sekhanda lesilinda i-DIN EN ISO 4762 M20 | 8.8/400Nm 10.9/550Nm 12.9/700Nm |
8.8/400Nm 10.9/550Nm 12.9/700Nm |
| 2 | Izikhonkwane zesilinda DIN6325 Ø12m6 |
 |
Okujwayelekile ISO128  |
Ukubekezelelana okujwayelekile ISO 2768- |
Bheka isaziso sokuvikela i-ISO 16016 | |
| Ukuqedwa kobuso I-DIN EN ISO 1302  |
Lo mdwebo we-2D ubalulekile ekukhiqizeni nasekuhlanganiseni. Okunye file amafomethi (isb. Isinyathelo kanye ne-Dxf) awolwazi olwengeziwe kuphela. | |||
| I-Tread countersinking DIN 76 ngaphansi kuka-90° ukuya ku-120° kuze kube Ububanzi obungaphandle bochungechunge |
Interface, Inc. • 7418 East Helm Drive • Scottsdale, Arizona 85260 USA
Ucingo: 480.948.5555
Ifeksi: 480.948.1924
www.interfaceforce.com
Amadokhumenti / Izinsiza
 |
Inzwa ye-Interface 3AR [pdf] Iziyalezo Inzwa ye-3AR, i-3AR, inzwa |
