Incwadi Yomsebenzisi ye-Insta360 3S Action Camera

Okuqukethwe fihla

1 Insta360 3S Action Camera

2 Imininingwane

3 Amadokhumenti / Izinsiza

3.1 Izithenjwa

Insta360 3S Action Camera

Imininingwane

Phenya isikrini esithintwayo
Inkinobho yokuvala
Inkinobho Yamandla
Q Inkinobho
Lanyard Port
Ukukhanya Kwenkomba
Somlomo
Khipha I-Switch
Indawo Yokuxhumana
Imbobo yokushaja ye-USB-C
I-Latch yokukhweza
Imakrofoni
Inzwa yokukhanya kwe-Ambient
Lens and Lens Guard
Standalone Camera Button
I-MicroSD Card Slot
Ithebhu yokukhiya

Izinyathelo

Adjust the length of the lanyard.
Remove the sticker from the front side of the Magnet Pendant.

Adjust the shooting angle by twisting the reverse of the pendant.
Put the Magnet Pendant under your clothes and attach the Standalone Camera over the top.

“`

View Fullscreen

1. Flip Touchscreen 2. Shutter Button 3. Power Button 4. Q Button 5. Lanyard Port 6. Indicator Light 7. Speaker 8. Release Switch 9. Contact Point 10. USB-C Charging Port 11. Mounting Latch
1. Indicator light 2. Microphone 3. Ambient Light Sensor 4. Lens and Lens Guard 5. Standalone Camera Button 6. Speaker 7. Lanyard Port 8. MicroSD Card Slot 9. Locking Tab 10. Contact Point

GO Ultra User Manual
1.2 Basic Accessories
The Standalone Camera and the Action Pod can be mounted on different accessories for increased shooting options.

I-Magnet Pendant

Steps: 1. Adjust the length of the lanyard. 2. Remove the sticker from the front side of the Magnet Pendant. 3. Adjust the shooting angle by twisting the reverse of the pendant. 4. Put the Magnet Pendant under your clothes and attach the Standalone Camera over the top.

Notes: 1. The Magnet Pendant contains magnets and should not be worn by anyone with a pacemaker. 2. The Standalone Camera cannot be attached to the reverse of the pendant. This side is silicone and not magnetic. 3. Rotate the gray silicone part of the badge

Isithombe

to change the shooting angle by 15°.

I-Magnetic Easy Clip

Steps: 1. Attach the Standalone Camera to the magnetic surface of the clip. 2. Clip the Magnetic Easy Clip to the brim of a hat.

Quick Release Safety Card

Steps: 1. Pass the string at the end of the quick-release anchor through the lanyard opening on the Standalone Camera. 2. Wrap the safety cord around the lanyard of the Magnet Pendant, tighten it. 3. Press the quickrelease anchor into the buckle on the safety cord. 4. Attach the Standalone Camera to the pendant on the Magnet Pendant either horizontally or vertically.

GO Ultra User Manual

1.3 Finding Your Serial Number

GO Ultra User Manual

2. Camera Settings Page (1) Press the power button to turn on the Action Pod. (2) Swipe down on the touchscreen to open the camera settings page -> tap
Settings -> tap About Camera to view the camera’s serial number.
3. Insta360 App (1) Connect GO Ultra to the Insta360 app. (2) Enter the My page on the Insta360 app and tap Device Information to view i
camera’s serial number.
4

GO Ultra User Manual
4. Insta360 Studio (1) Open Studio on your computer and import the original film. (2) Select the original film and open the file properties window in the right menu bar
ku view the camera serial number.
5

GO Ultra User Manual
2. Ukusetshenziswa Kokuqala
2.1 Isitoreji
GO Ultra stores images and videos on a MicroSD card. Open the cover on the microSD card slot on the side of the Standalone Camera to insert the MicroSD card. GO Ultra accepts UHS-I, V30 and above microSD/TF cards with exFAT compatibility. Other cards may be too slow to record footage and UHS-II, UHS-III or other memory cards exceeding 1TB may be incompatible.
2.2 Iyavula
Align the pogo pins of the Standalone Camera with the contact points on the Action Pod and insert. Press and hold the power button on the Action Pod for 2 seconds to power on. To remove the Standalone Camera, press and hold the release button while pulling the camera gently.
6

GO Ultra User Manual
2.3 Ukwenza kusebenze
The first time you use GO Ultra, you need to activate it with the Insta360 app. You can download the Insta360 app in the following ways: 1. After turning on the camera for the first time, scan the QR code that appears on the touchscreen. 2. Scan the QR code on the accessory box. 3. Download the Insta360 app from the Downloads page of the official Insta360 webindawo.hone. 2. Open the Insta360 app, tap the camera icon at the bottom of the screen to search for devices, and find GO Ultra. The last 6 digits of the camera’s serial number will be displayed in the pop-up window. Authorize the connection on your smartphone, then tap the prompt on the Action Pod to confirm the activation. 3. If there is a new version of firmware to download, the Insta360 app will show a download prompt. Follow the on-screen instructions to complete the update. Once this is complete, follow the prompts on the Insta360 app to complete the activation.
7

GO Ultra User Manual
2.4 Ukushaja
1. Place the Standalone Camera in the Action Pod and use the official USB-C cable to connect the camera and a power supply for charging. 2. During the charging process, the indicator lights on both the GO Ultra Standalone Camera and Action Pod will be lit orange. Once fully charged, these lights will be green. Notes: 1. Ensure the Standalone Camera is securely fastened in the Action Pod when charging. 2. It is recommended to use a mains power to charge the camera. The maximum current and voltage is 5V 3A. If connected to a computer or other type of power supply, the current and voltage may be too low to charge both the Standalone Camera and Action Pod at the same time.
GO Ultra Charging Time 0-80%: in 12 minutes 0%-100%: in 20 minutes
Action Pod Charging Time 0-80%: in 18 minutes 80%-100%: in 40 minutes
8

GO Ultra User Manual · GO Ultra charging time: measured in a 25 (77°F) laboratory environment, using a sufficiently charged Action Pod (70%), without connecting to an external power supply, and with the camera turned off. · Action Pod charging time: measured in a 25 (77°F) laboratory environment, using a 30W USB-C charger that supports the PD 3.0 PPS protocol, with the expansion module turned off and without connecting a the Standalone Camera. Actual charging time may vary under different conditions.
9

3. Ukusetshenziswa Okuyisisekelo
3.1 Buttons Action Pod Buttons
Inkinobho Yamandla

GO Ultra User Manual

Ukusebenza Kwesimo Sekhamera

Izincazelo

Kuvaliwe Kuvuliwe

Cindezela kanye

· Turn the camera on. When you turn the camera on for the first time, press and hold the power button for 2 seconds; after activation, you can power it on with a single press.

· Touchscreen:

When the touchscreen is on: turn off

Cindezela kanye

the screen and lock it.

When the touchscreen is off: turn on

the screen and unlock it.

· 2 seconds: Turn the camera off. Long press
· 7 seconds: Force shutdown.

Q Inkinobho

GO Ultra User Manual

Ukusebenza Kwesimo Sekhamera

Izincazelo

Ixhaswe amandla

Cindezela kanye

Quickly access preset shooting modes and options. Press again to switch between different presets. On the first use, the button will open the Shooting Mode page. Tap the icon in the upperleft corner to open the Presets page, or customize them in the Quick Button section of the Settings Page.

Inkinobho yokuvala

Ukusebenza Kwesimo Sekhamera

Izincazelo

Inikwe amandla amandla

Cindezela kanye

· Start shooting with QuickCapture. Press once: Start recording video. Double-press: Start taking photos.
* Must be enabled on the camera first.
11

GO Ultra User Manual

Ixhaswe amandla

Cindezela kanye

· On the Preview Page: Tap to start taking photos/recording videos. When recording videos, tap again to stop.
· On other interfaces: Tap to return to the Preview Page and start shooting in the selected mode. · When connecting to the app for the first time, the shutter button on either the Standalone Camera or the Action Pod can confirm the authorization. When recording, tap the red button on the screen to pause. Tap the flashing red dot on the touchscreen or the shutter button to continue recording. To stop recording, tap the stop button in the lower right corner.

Cindezela isikhathi eside

Quickly cancel and delete recording. “Long press Shutter Button to cancel recording” must be enabled in the Settings first.

GO Ultra User Manual

Standalone Camera Button
Control the Standalone Camera separately from the Action Pod.

Ukusebenza Kwesimo Sekhamera

Izincazelo

Kuvaliwe Kuvuliwe

Long press · 2 seconds: Turn the camera on.

Press once/ double click

· Start QuickCapture. Short press: start recording. Double-press: start recording in FreeFrame.
* Must be enabled on the Action Pod first.

Cindezela kanye

· Start taking photos/recording videos. In video recording mode, tap again to stop recording. · When the Insta360 app is connected to the GO Ultra Standalone Camera for the first time, press the shutter button on either the Action Pod or the Standalone Camera to confirm the connection.

Cindezela kabili

· Start taking photos. * You can customize the double-press button effect in the Settings page. This will take effect when the device is powered on and not connected to the Action Pod.

· 2 seconds: Turn the camera off. Long press
· 7 seconds: Force shutdown.

GO Ultra User Manual
GO Ultra Button Customization
You can customize GO Ultra’s button on the Action Pod or the settings page of the Insta360 app. · Camera Settings 1. Turn GO Ultra on and enter the Shortcut menu. 2. Select Standalone Camera Button Settings in Settings to customize the shutter button on the GO Ultra Standalone Camera. * If you change the settings on the Action Pod while the Standalone Camera is separate, the shooting parameters will only change upon connection.
· App Settings 1. Connect GO Ultra to the Insta360 app. 2. Go to Button Settings on the Settings page to customize the GO Ultra button shooting function when the camera is turned on or off.
14

GO Ultra User Manual
3.2 Using GO Ultra
· When the Standalone Camera is connected to the Action Pod, GO Ultra can be used like a standard action camera.
· When the Standalone Camera is used separately from the Action Pod, the Action Pod can be used to remotely control the Standalone Camera and preview footage ngesikhathi sangempela.
* When the Action Pod is used to remotely preview footage from the Standalone Camera, data is transmitted via Bluetooth, meaning the quality will be reduced. The quality of the actual video is not affected and will remain subject to the recording parameters.
15

GO Ultra User Manual
3.3 How to quickly distinguish between Landscape and Portrait Mode
Users can quickly distinguish between the horizontal and vertical shooting modes by observing the camera position and the direction of the indicator light. When using the Standalone Camera to take selfies: · Horizontal landscape shooting: the lens will be in the upper right corner of the body, and the indicator light will be horizontal. · Vertical portrait shooting: the lens will be in the upper left corner of the body, and the indicator light will be vertical. When the Standalone Camera is attached to the Magnet Pendant: · Horizontal landscape shooting: the lens will be on the left, and the indicator light will be visible. · Vertical portrait shooting: the lens will be on the right, and two indicator lights will be visible.
16

GO Ultra User Manual
3.4 Using the Touchscreen Touchscreen operation
The touchscreen’s main display shows the current shooting mode. The menu bar shows the battery level, storage capacity, and current shooting parameters. Swipe or tap the touchscreen to access the following:

Tap the screen Hide/show shooting
ulwazi.

Swayiphela phansi kusukela phezulu View Imenyu Yezinqamuleli.

Swayiphela kwesokunxele nakwesokudla phakathi nendawo
Faka izilungiselelo zepharamitha yokudubula.

Swipe right from the left Enter the album page.

Swipe left from the right Enter the shooting parameter settings.

Swipe up from the bottom Enter the shooting parameter settings.

Ukudubula Interface

GO Ultra User Manual

1. Isitoreji: Ibonisa inombolo esele yezithombe noma ubude bevidiyo ye-footage that can be stored on the microSD card. 2. HDR: Shows whether HDR is enabled. 3. Tilt Fix: Turn on/off. 4. Shooting Mode: Tap the icon and swipe to select a different shooting mode. 5. Standalone Camera Battery Status: Current battery level of the Standalone Camera. 6. Action Pod Battery Status: Current battery level of Action Pod. 7. Shooting Specifications: Current shooting mode settings. 8. Clarity Zoom: Toggle between 1-2x zoom, long press to slide zoom. 9. Field of View: Shintsha Inkambu ye View.
18

GO Ultra User Manual

Izindlela Zokudubula

Tap the shooting mode icon and swipe, or swipe left or right from the center of the screen to select a different shooting mode.

Imodi yokudubula

Incazelo

Isithombe
Video Pure Video
FreeFrame Video Timelapse TimeShift
Loop Recording Slow Motion Starlapse Burst Photo Interval

Suitable for taking photos in most scenarios. When Live Photo is activated, the resolution will switch from 50MP to 12.5MP. Suitable for shooting videos in most scenarios. The maximum resolution and frame rate is 4K60fps. Suitable for shooting videos in dark environments. When active, low-light videos will be brighter and richer in detail. Shoot videos with the option to choose your aspect ratio after recording. FlowState Stabilization and 360 Horizon Lock applied in post via the Insta360 app or Studio. Suitable for shooting static timelapse videos. Suitable for shooting hyperlapse videos while moving. Record continuously and save only the last fixed-length segment. This length can be customized. Shoot slow-motion videos. Shoot multiple photos and automatically combine them with Starlapse effects. Take multiple photos in quick succession. The camera automatically takes a photo at a specific time interval. This interval can be customized.

GO Ultra User Manual
Imenyu yesinqamuleli
Swayiphela phansi esikrinini esithintwayo ukuze view i-Shortcut Menu.
1. Rotation Lock: Turn on/off. 2. Lock Screen: Tap to lock the touchscreen. When locked, swipe up on the touchscreen or press the power button while the screen is off to unlock. 3. Indicator Light Brightness: Change the brightness of the Indicator light on the Standalone Camera. 4. Prompt Sound: Set the camera speaker volume. There are four options: High, Medium, Low and Mute. 5. Adjust Brightness: Slide the bar to adjust the screen brightness. 6. Camera settings: Tap to access more camera settings. 7. QuickCapture: Once enabled, press the shutter button on the Standalone Camera or Action Pod to start QuickCapture. Different functions can be assigned to single- and double-presses. 8. Pre-recording: Turn on/off. Once enabled, 10-30 seconds from before the Shutter Button is pressed will be saved. Only supported in Video and FreeFrame
20

GO Ultra User Manual
Video. 9. Interval recording: Once enabled, the Standalone Camera will automatically record at pre-set intervals. During one of these intervals, pressing the shutter button on either the Standalone Camera or the Action Pod will switch to manual shooting. Once this recording is finished, interval recording will continue. (*This mode will be paused if the Standalone Camera is returned to the Action Pod.) 10. AI Highlight Assistant: Automatically identify highlight moments during shooting and can be used with the APP for faster editing. 11. Timed Capture: Tap to use a timer in the currently selected shooting mode. In the settings, the duration, frequency, and other parameters can be customized. This function is available in Video, PureVideo, FreeFrame Video, Timelapse, TimeShift, Loop Recording, Slow Motion, Starlapse, as well as the Burst Shooting, Interval, and standard Photo Modes. 12. Audio settings: Tap to switch audio modes, select input device, adjust the gain of the microphone, or switch noise reduction modes. 13. Grid: Turn on/off. 14. Endurance Mode: By limiting the use of some functions, the GO Ultra’s battery life can be extended by up to 20%. When active, only Video Mode at a maximum resolution and frame rate of 4K30fps is supported. 15. Level Indicator: Tap to turn on/off the level meter. 16. kids Mode: Suitable for when children are using GO Ultra or wearing the device. This setting disables audio prompts and the touchscreen to prevent accidental presses. 17. Voice Control: Tap to turn on/off. Once activated, select the desired language and use specific command words to shoot photos, videos, and turn the camera off. 18. Screen Reader: Tap to turn on/off. Once activated, the camera will prompt certain commands and updates via voice. 19. Gesture Control: Tap to turn on/off. Once activated, use hand gestures to take pictures or record videos. 20. Bluetooth: Tap to pair Bluetooth devices.
21

GO Ultra User Manual
Ukucaciswa kokudubula
Swayiphela phezulu kusukela phansi kwesikrini esithintwayo uye view shooting specifications.

Imodi yokudubula

Amapharamitha

Photo Video Pure Video Free Frame TimeShift Timelapse
Loop Recording Slow Motion Starlapse Burst Photo
Isikhawu

Format, ratio, resolution, countdown Active HDR, stabilization level, ratio, duration, resolution, frame rate Stabilization, ratio, duration, resolution, frame rate Active HDR, ratio, duration, resolution, frame rate Stabilization, ratio, shooting time, resolution, frame rate Resolution, frame rate, scene, Stabilization, ratio, shooting interval, recording duration Active HDR, stabilization, ratio, loop duration, resolution, frame rate Stabilization, ratio, duration, resolution, frame rate Type, photo format, ratio, duration, resolution, countdown Continuous shooting number, pre-shooting, photo format, ratio, resolution, countdown Interval duration, photo format, ratio, duration, resolution, countdown

GO Ultra User Manual
Shooting Parameter
Swipe left from the right edge of the touchscreen to see the shooting parameters.

Amapharamitha

Incazelo

Isivinini seShutter

Controls the time it takes for light to enter the camera. The faster the shutter speed, the clearer the image. Make this higher for dynamic shots and lower for low-light conditions.

Ukuzwela (ISO)

Changes how sensitive the sensor is to light. A higher sensitivity means the camera will capture more light and create a brighter image.

Isinxephezelo Sokuchayeka
Inani (EV)

In Auto Mode, adjust the EV to find the correct exposure level.

Ibhalansi Emhlophe (WB)

Isusa imibala namathoni angelona iqiniso ukuze imibala ithathwe ngokunembile esithombeni. Ibhalansi emhlophe ephakeme ikhiqiza amathoni afudumele kanye nemiphumela ephansi kumathoni apholile.

Ukunciphisa Ukufiphala KweJitter

Improves motion blur and stabilization in low-light environments, where the image will be darker and may flicker.

Izihlungi

Engeza amathoni emibala ehlukene kanye nemiphumela.

Imodi yokulinganisa

Ubuso Obubalulekile bubeka phambili ubuso ukuze bukhanye. I-Matrix iqinisekisa ukuvezwa okunembile kwesithombe sonke.

Ubukhali

Ilungisa ukucaca kwesikrini sevidiyo kanye nobukhali bemiphetho yesithombe.

GO Ultra User Manual

Imodi yokuma ngobude

Improves facial brightness and skin texture in portraits, creating bright and white portraits. Avoid using in highintensity sports scenes.

Shooting Mode Photo Video
Ividiyo Ehlanzekile
Ividiyo ye-FreeFrame
TimeShift Timelapse
Loop Recording Slow Motion Starlapse Burst Photo Interval

Amapharamitha

Okuzenzakalelayo

Imanuwali

I-EV, Imodi yokulinganisa, i-WB

Shutter, ISO, WB

Filters, EV, Metering Mode, Jitter Blur Reduction, WB, Sharpness