Ukuqala Ngokushesha
kwe-tM-AD2
Dec 2015, Inguqulo 1.0.0
I-tM-AD2 Ukuqala Okusheshayo 
Halala!
Siyakuhalalisela ngokuthenga i-tM-AD2 isixazululo esizenzakalelayo esidume kakhulu sokuqapha nokulawula okukude. Lo mhlahlandlela Wokuqalisa Okusheshayo uzohlinzeka ngolwazi oludingekayo ukuze uqalise nge-tM-AD2. Sicela uphinde ubheke Incwadi Yomsebenzisi ukuze uthole ulwazi oluningiliziwe mayelana nokusethwa nokusetshenziswa kwe-tM-AD2.
Yini esebhokisini lokuthumela?
Ngaphezu kwalo mhlahlandlela, ibhokisi lokuthumela lihlanganisa izinto ezilandelayo:
I-tM-AD2
Ukusekela kwezobuchwepheshe
- I-ICP DAS Webindawo
http://www.icpdas.com/
Ukuqonda Ukucaciswa Kwezingxenyekazi Zekhompyutha kanye Nemidwebo Yezintambo
Ngaphambi kokufaka i-hardware, kufanele ube nokuqonda okuyisisekelo kokucaciswa kwehadiwe kanye nemidwebo yezintambo.
Imininingwane Yesistimu
| Ukuxhumana | |
| Isixhumi esibonakalayo | RS-485 |
| Ifomethi | (N, 8, 1), (N, 8, 2), (0, 8, 1), (E, 8, 1) |
| Isilinganiso se-Baud | 1200 ~ 115200 bps |
| Iphrothokholi | I-DCON, Modbus/RTU, Modbus/ASCII |
| I-Double Watchdog | Yebo, Imojuli (imizuzwana engu-2.3), Ukuxhumana (Okuhlelekayo) |
| Izinkomba ze-LED | |
| Amandla | I-LED engu-1 njengesikhombi samandla |
| Ukuzihlukanisa | |
| I-Intra-module Isolation, Field-to-Logic | 3000vdc |
| Ukuvikelwa kwe-EMS | |
| I-ESD (IEC 61000-4-2) | ±4 kV Othintana naye Kutheminali ngayinye |
| ±8 kV Umoya we-Random Point | |
| I-EFT (IEC 61000-4-4) | ±4 kV yamandla |
| I-Surge (IEC 61000-4-5) | ±3 kV yamandla |
| Izidingo zamandla | |
| Ukuvikelwa kwe-Polarity Protection | Yebo |
| Inikwe amandla kusuka ku-Terminal Block | Yebo, 10 fu 30 Voc |
| Ukusetshenziswa | 0.8 W Ubukhulu. |
| Omakhenikha | |
| Ubukhulu (W x L x H) | 52 mm 98 mm 27 mm |
| Ukufakwa | Ukukhweza kwe-DIN-Rail |
| Imvelo | |
| Izinga Lokushisa Lokusebenza | -25∼ +75°C |
| Izinga Lokushisa Lesitoreji | -30∼ +75°C |
| Umswakama | 10 fu 95% RH, Ayincishi |
I/O Imininingwane
| Okokufaka kwe-Analog | ||
| Iziteshi zokufaka | 2 Iphelele | |
| Uhlobo | 0 ~ 500m V, 0~ 1 v, 0~ 2.5 v, 0 ~ 5 v, 0~ 10 v, 0~ 20 mA, 4~ 20 mA | |
| Isixazululo | Imodi Ejwayelekile | 14-bit |
| Imodi esheshayo | 12-bit | |
| SampLing Ling | Imodi Ejwayelekile | 10 Hz inani |
| Imodi esheshayo | 200 Hz inani | |
| Ukunemba | Imodi Ejwayelekile | +1-0.1% |
| Imodi esheshayo | +/-0.5% | |
| I-Zero Drift | +/-20 UV/°C | |
| I-Span Drift | +/-25 ppm/°C | |
| Okokufaka Impedance | Voltage 10 mfg |
|
| Okwamanje | 125 Ω | |
| I-Overvoltage Ukuvikelwa | 120 vc | |
| Ukuvikelwa Kwamanje | Yebo, i-50 mA ku-110 VDC | |
| I-Open Wire Detection ye-4 n 20 mA | Yebo | |
Uxhumano Lwezintambo:
Iphinikhodi :
Phina Izabelo
Iqalisa i-tM-Series ku-Init Mode
Qiniseka ukuthi iswishi ibekwe endaweni ethi "Init".
Ixhuma ku-PC kanye Nokunikezwa kwamandla
Uchungechunge lwe-TM-Series lufakwe imbobo ye-RS-485 yokuxhuma kusiguquli esingu-232/USB ku-PC.
Ifaka i-DCON Utility
I-DCON Utility iyithuluzi elisebenziseka kalula elenzelwe ukunika amandla ukucushwa okulula kwamamojula we-I/O asebenzisa iphrothokholi ye-DCON.
Isinyathelo 1: Thola i-DCON Utility
Insiza ye-DCON ingatholwa ku-CD engumngane noma kusayithi le-ICPDAS FTP:
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
CD:\Napdos\Driver\DCON_Utility
Ukusebenzisa I-DCON Utility Ukuqalisa I-TM-Series Module
I-M-Series iyimojula ye-I/O esekelwe kuphrothokholi ye-DCON, okusho ukuthi ungasebenzisa I-DCON Utility ukuze uyiqalise kalula.
Isinyathelo 1: Qalisa i-DCON Utility_Pro
Isinyathelo sesi-2: Sebenzisa imbobo ye-COM1 ukuze uxhumane ne-TM-Series
Chofoza inketho ethi “COM Port” kumenyu futhi kuzovezwa ibhokisi lengxoxo elizokuvumela ukuthi usethe imingcele yokuxhumana njengoba kuchazwe kuthebula elingezansi.
| Ipharamitha yokuxhumana | Inani elizenzakalelayo lemboni |
| Ikheli | 0 |
| Isilinganiso se-Baud | 9600 |
| Iphrothokholi | I-DCON |
| I-Checksum | Ikhutshaziwe |
| Ukulingana | N,8,1 |
Isinyathelo 3: Cinga imojuli ye-tM-Series
Chofoza inkinobho ethi “Qala Ukusesha” ebhokisini lamathuluzi ukuze useshe imojuli ye-tM-Series.
Ngemva kokuthi imojuli ye-TM-Series isibonisiwe ohlwini, chofoza inkinobho ethi “Misa ukusesha”.
Isinyathelo sesi-4: Xhuma ku-TM-Series
Ngemva kokuchofoza igama lemojula ohlwini, ibhokisi lengxoxo lizovezwa.
Isinyathelo sesi-5: Qalisa imojuli ye-TM-Series
Setha inkambu ethi “Ikheli” ebhokisini lengxoxo ibe ngu-1 bese uchofoza inkinobho ethi “Ukusetha Imojula ” ukuze ulondoloze izilungiselelo.
Iqalisa kabusha i-TM-SeriesModule kuModi Ejwayelekile
Qiniseka ukuthi iswishi ye-INIT ibekwe endaweni "Ejwayelekile".
Ukuqala Ukusebenza Kwemojula
Ngemva kokuqalisa kabusha imojuli ye-TM-Series, sesha imojuli ukuze uqiniseke ukuthi izilungiselelo zishintshiwe. Ungachofoza kabili egameni lemojuli ohlwini ukuze uvule
Imephu yekheli le-Modbus
| Ikheli | Incazelo | Isibaluli | ||||||||||||||||||||
| 30001 – 30002 40001 – 40002 |
Inani lokufakwayo kwe-analog yesiteshi 0 kuya ku-1 | R | ||||||||||||||||||||
| 40257 – 40258 | Ikhodi yokufakwayo yohlobo lwe-analog yesiteshi 0 ukuya ku-1 | R/W | ||||||||||||||||||||
| 40481 | Inguqulo ye-Firmware (igama eliphansi) | R | ||||||||||||||||||||
| 40482 | Inguqulo ye-Firmware (igama eliphakeme) | R | ||||||||||||||||||||
| 40483 | Igama lemojuli (igama eliphansi), 0x2001 | R | ||||||||||||||||||||
| 40484 | Igama lemojuli (igama eliphakeme), 0x0700 | R | ||||||||||||||||||||
| 40485 | Ikheli lemojuli, ububanzi obuvumelekile: 1 – 247 | R/W | ||||||||||||||||||||
| 40486 | Iziqephu 5:0 Izinga le-Baud, 0x03 - OxOA
Iziqephu 7:6 |
R/W | ||||||||||||||||||||
| 40488 | Isikhathi sokulibaziseka kwempendulo ye-Modbus ku-ms, ububanzi obuvumelekile: 0 – 30 | R/W | ||||||||||||||||||||
| 40489 | Inani lokuvala le-watchdog engumsingathi, 0 – 255, ngo-0.1s | R/W | ||||||||||||||||||||
| 40490 | Isiteshi vumela/cisha, 00h – 03h | R/W | ||||||||||||||||||||
| 40492 | Isibalo sokuvala se-watchdog esisingethe, bhala u-0 ukuze usule | R/W | ||||||||||||||||||||
| 40494 | 4mA ngaphansi komkhawulo webanga ku-0.1 mA, 0 – 40 | R/W |
| 10129 – 10130 00129 – 00130 |
Isimo esingaphezu/ngaphansi kwebanga lesiteshi 0 ukuya ku-1 ku-4 – 20mA noma 0 – 20mA ububanzi | R |
| 257 | Iphrothokholi, 0: DCON, 1: Modbus RTU | R/W |
| 258 | Iphrothokholi, 0: inqunywa ngu-00257, 1: Modbus ASCII | R/W |
| 261 | 1: vumela, 0: khubaza inja yokubuka umsingathi | R/W |
| 269 | Ifomethi yedatha ye-Modbus, 0: i-hex, 1: ubunjiniyela | R/W |
| 270 | Isimo sokuvala se-watchdog somsingathi, bhala oku-1 ukuze usule isimo sokuvala se-watchdog host | R/W |
| 271 | 1: nika amandla, 0: khubaza imodi esheshayo | R/W |
| 273 | Setha kabusha isimo, 1: kuqale kufundwe ngemva kokukhanyisa, 0: hhayi okokuqala kufundwe ngemva kokukhanyisa | R |
Copyright © 2015 ICP DAS Co., Ltd. Wonke Amalungelo Agodliwe. I-imeyili: service@icpdas.com
Amadokhumenti / Izinsiza
 |
I-ICP DAS tM-AD2 2-Channel Analog Input [pdf] Umhlahlandlela Womsebenzisi I-tM-AD2, 2-Channel Analog Input, tM-AD2 2-Channel Analog Input |
