I-Hewei Electronic Technology HW58R12-WBDB Multi Protocol RFID Reader Module manual Owner's Manual
I-Hewei Electronic Technology HW58R12-WBDB Multi Protocol RFID Reader Module

Product Specification Product

Igama: Multi-protocol RFID Reader Module
Imodeli Yomkhiqizo: HW58R12-WBDB/HW59R12-XYLSProduct
Ikhodi: 5824071101/5924071101
Preparation: Xu Xiaobing
Idethi: 24/08/08
Checked: Wang Hanping
Idethi: 24/08/08
Approved: Jiang Xulian
 Idethi: 24/08/08
Shintsha Ilogi
Usuku Inguqulo Ukulungiselela Kuhloliwe Change content Ukuphawula
24/07/11 V1.0 Xiaobing XU Wang Hanping Original Drafting

Isithombe somkhiqizo:
Isithombe somkhiqizo
Isithombe somkhiqizo

Interface Specification (C3030WR-5P ,RS232):
Iphinikhodi1 Iphinikhodi2 Iphinikhodi3 Iphinikhodi4 Iphinikhodi5
VCC GND I-RXD I-TXD GND
Card Reader Size(mm):
Ubukhulu

Izici kanye nemisebenzi

  • This module is a 13.56MHz RFID read/write module developed based on a multi-protocol readerchip;The reader chip supports ISO/IEC 14443 Type A/Type B protocols. Supports mobile payment applications such as Apple Pay and Samsung Pay. Supports P2P passive initiator mode under ISO/IEC 18092. Supports ISO/IEC 15693 protocol. Complies with EMV 3.0/3.1 certification, including electrical, protocol, and mobile compatibility tests. The module comes pre-integrated with operational commands for reading Mifare1 S50/S70, Mifare UltraLight, MifareDESFire, CPU cards, and second-generation Chinese resident ID cards.
  • Ukusebenza okubanzi voltage range: 5V–24V;
    Supports RS232 serial communication with adjustable baud rate;
  • Automatically detects card presence and outputs data via serial port;
  • Supports Low Power Card Detection (LPCD);
  • LED Indicator Light Prompt.

Imininingwane Yezobuchwepheshe

Igama Lomkhiqizo Multi-protocol RFID Reader Module
Product Model HW58R12-WBDB/HW59R12-XYLS
Ubukhulu bomkhiqizo 65*42mm
Indawo yokusebenza Operating Temperature: -40 to 85℃Maximum Humidity: 5%~95% RH, non-condensing and non-freezing
Operating frequency 13.56mHz
Contactless Card Contactless smart cards supporting ISO/IEC 14443 Type A/Type B protocols Contactless smart cards compliant with ISO/IEC 15693 protocol
Card Reading Distance ≤4cm
Indlela Yokuxhumana RS232 serial communication, transmission rate: 19200 bps
Ukunikezwa kwamandla kagesi DC 12V, supports input range of 5~ 24V
Ukusetshenziswa kwamandla Standby: <0.3W
Inkomba Power indicator light
Ezinye Izici Provides interface functions or interface command sets, supports custom development.

Conformal coating follows the following standards:

  1. Spray coating thickness: 0.1-0.3 mm, with a cured thickness of 40-60 µm.
  2. Conformal coating bubble standards: Bubbles are allowed on the plastic body or insulating parts of components, and small bubbles within the coating are acceptable. Only a single bubble enclosing a single part of a conductor is acceptable; bubbles between the component leads are not acceptable.
  3. Exposed copper with tin plating, connectors, and power components should not be coated with conformal coating.
  4. Components within 3 mm around the connectors do not require conformal coating, but a clear isolation strip of conformal coating must be present around the connectors.
  5. No conformal coating is allowed within a 5 mm diameter of positioning holes, and holes should not be filled.
  6. All IC component leads must be coated with conformal coating, and there should be visible traces of conformal coating on the body.

Salt Spray Testing is conducted in accordance with the following standards:

GB/T 2423. 17-2008 《Environmental Testing for Electrical and Electronic Products, Part 2: Test Methods, Test Ka: Salt Spray》

Isitatimende se-FCC

Le divayisi ithobela Ingxenye 15 yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
  1. lolu cingo kungenzeka lungabangeli ukuphazamiseka okuyingozi.
  2. lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

Qaphela: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lo mshini ukhiqiza ukusetshenziswa futhi ungakhipha amandla efrikhwensi yomsakazo futhi, uma ungafakiwe futhi usetshenziswe ngokuhambisana nemiyalelo, ungabangela ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

  • Hlela kabusha noma hambisa uthi olwamukelayo.
  • Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
  • Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
  • Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.
    Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobelana kungase kuchithe igunya lomsebenzisi lokusebenzisa okokusebenza.

Isitatimende Sokuchayeka Kwemisebe ye-FCC

Le divayisi ithobelana nemikhawulo yokuchayeka emisebeni ye-FCC RF ebekwe endaweni engalawuleki. Lesi sithumeli akumele sibekwe endaweni eyodwa noma sisebenze ngokuhlangana nanoma iyiphi enye i-antenna noma i-transmitter.
Le divayisi kufanele isebenze ngebanga elincane elingama-20 cm phakathi kwerediyetha nomzimba womsebenzisi

Hewei Electronic Technology Logo

Amadokhumenti / Izinsiza

I-Hewei Electronic Technology HW58R12-WBDB Multi Protocol RFID Reader Module [pdf] Incwadi Yomnikazi
HW58R12-WBDB, HW58R12-WBDB Multi Protocol RFID Reader Module, Multi Protocol RFID Reader Module, RFID Reader Module, Reader Module, Module

Izithenjwa

Shiya amazwana

Ikheli lakho le-imeyili ngeke lishicilelwe. Izinkambu ezidingekayo zimakiwe *