I-GARNET T-DP0301-C SEELEVEL Iphothali Yedatha Yokufinyelela kanye Nemanuwali Yomsebenzisi Yokubonisa Ukude

ISINGENISO

Siyakuhalalisela ngokuthenga Izinsimbi Ze-Garnet
SEELEVEL Access™ Data Portal. I-SEELEVEL Access™ incoma i-SEELEVEL Annihilator™ 806-B, 806-Bi, noma i-SEELEVEL Special™ 808-P2 kanye namageji e-Bona LeveL Pro Series II 810-PS2 ngokukunikeza ukufunda kwevolumu eyengeziwe kukhebhu yeloli lakho.

Ngaphezu kokuhlinzeka ngokufundwa kwezinga lethangi, i-SEELEVEL Access™ ihlinzeka ngokukhipha kwe-analog engu-1- 5 V ngokulingana nevolumu yoketshezi olubonisiwe. Lokhu okukhiphayo kwe-analogi kungasetshenziswa ukuxhumana nezinga lethangi kwezinye izingcezu zemishini efana nezinhlelo zokuphatha imikhumbi noma Amadivayisi Wokungena Nge-elekthronikhi (ELD).

Inani eliphelele lesikali sokukhiphayo kwe-analogi lingasethwa kusetshenziswa izinkinobho ezingemuva kwesibonisi, azikho izinto zokusebenza ezengeziwe ezidingekayo ukuze kulinganiswe.

I-SEELEVEL Access™ iqukethe ne-serial RS-232 interface evumela ukuphathwa kwemikhumbi noma amasistimu e-ELD ukuthi aqoqe idatha yevolumu yoketshezi kugeji. I-interface iyi-duplex egcwele futhi iqukethe izici zokuphepha zokuvimbela ukufinyelela okungagunyaziwe.

Isibonisi se-SEELEVEL Access™ siklanyelwe ukumelana nokudlidliza kanye nokushaqeka okuhlangatshezwana nakho ezinhlelweni zeselula. Ngenkathi i-808-P2 ne-810-PS2 isebenza kumabhethri angaphakathi, (amandla weloli we-12 volt asetshenziselwa ukusebenzisa ukukhanya kwangemuva nama-alamu angaphandle), isibonisi se-SEELEVEL Access sisebenza ngamandla weloli we-12V.

SEELEVEL Access™
Isibonisi Esikude Nephothali Yedatha
nge-1-5 V Output kanye ne-RS-232 Serial Interface

IZICI

I-SEELEVEL Access™ yakhelwe ngokukhethekile izinhlelo zokusebenza ezithile kanye nezici ezithile:

Izici zokufinyelela ezijwayelekile ze-SEELEVEL

1. Isignali ephakathi kwesibonisi esingu-806-B, 806-Bi, 808-P2 noma 810-PS2 kanye ne-SEELEVEL Access™ ifakwe ikhodi yedijithali ukuze umugqa wesiginali uxhumeke kusetshenziswa ipulagi ye-trailer yamaphini angu-7 evamile.
2.  Isibonisi sisebenza ngamandla weloli angu-12 volt, futhi sidonsa ngaphansi kuka-150 mA.
3. Idizayini yedijithali yonke (ngaphandle kokuphumayo kwe-1-5 V) iqeda ukufunda ukukhukhuleka noma ukuwohloka, iqinisekisa ukunemba kwesikhathi eside ngaphansi kwazo zonke izimo zokusebenza.
4. Ukusebenza kusuka -40 °C kuya +60 °C (-40 °F kuya +140 °F) izinga lokushisa le-ambient.
5. Ukufakwa kalula nokusevisa ngewaranti enomkhawulo yonyaka owodwa.
   Izici ezengeziwe zokufinyelela kwe-SEELEVEL T-DP0301-C
6. I-analogi engu-1-5 V okukhiphayo, no-1 V ohambelana nevolumu enguziro ebonisiwe, kanye no-5 V ohambisana nesikali esigcwele esibonisiwe sevolumu ehlelwe kusibonisi esikude.
7. Isixhumi esibonakalayo se-RS-232 esitholakalayo ukuze sixhume ezinhlobonhlobo ze-ELD noma amasistimu okuphatha izimoto.
8. I-SEELEVEL Access™ ihlinzeka ngesibonisi se-LED esifundeka kalula ngaphakathi kokuhlangene, onqenqemeni-view indawo ebiyelwe, elungiselelwe ukukhwezwa kwe-top-of-dash noma ngaphezulu kwekhonsoli. Isibonisi sifakwe endaweni ebiyelwe nge-aluminium engu-2.7” ububanzi x 1.1” ukuphakama x 3.4” ukujula (68 mm ububanzi x 29 mm ukuphakama x 87 mm. ukushona).
9. Iswishi yenkinobho ye-dimmer yenza isisebenzisi sikwazi ukulawula ukukhanya.
10. Ukufakwa kukagesi kwezintambo ezi-6 okulula - amandla angu-12V (obomvu), aphansi (amnyama), isignali yegeji (ephuzi), okukhiphayo kwe-analog (okumhlophe/okuluhlaza okwesibhakabhaka), ukwamukela okuwuchungechunge (okunsomi) kanye ne-serial transmit (grey).

IMIDLALO YEZINKHI

I-SEELEVEL Access™ yakhelwe ukuthi ifakwe kalula nge-806-B, 806-Bi, 808-P2 noma 810-PS2 uchungechunge lwegeji ye-SEELEVEL™. Imiyalo yokufaka iyatholakala ku-inthanethi ku- www.garnetinstruments.com.

I-SEELEVEL Access™ Remote Display kulula ukuyifaka:

810-PS2 Umdwebo Wezintambo

806-B Umdwebo Wezintambo

806-Bi Wiring Umdwebo

BONISA UHLELO

Isibonisi se-SEELEVEL Access™ sibonisa izinga lethangi ngokuphinda ulwazi olukhonjiswe ku-806-B, 806-Bi, 808-P2 noma 810-PS2 gauge. Okukhiphayo kwe-analog engu-1-5 V kubalwa kusukela kuzinga lokubonisa ngokuphumayo okungu-1 V okuhambisana nezinga lokubonisa likaziro, kanye nokuphumayo okungu-5 V okuhambisana nezinga lesikali esigcwele esihlelwe kusibonisi se-SEELEVEL Access™.

Okwesiboneloample, uma isikali esigcwele sihlelelwe ukuthi sibe ngu-500.0, khona-ke inani lokubonisa elingu-400.0 lizoholela ekuphumeni kwe-analog okungu-4.20 V. Isibonisi sizobona indawo yedesimali futhi silungise okukhiphayo ngokufanele, ngakho kulesi ex.ample ivelu yokubonisa engu-400 izophinda iphumele ekukhishweni kwe-analog kwe-4.20 V.

Ukusetha ileveli yesikali esigcwele:

1. Nquma umthamo omkhulu wevolumu ongaboniswa bese ukhetha inani eliphelele lesikali elilingana noma likhulu kunale volumu.
2. Cindezela kokubili izinkinobho OKULANDELAYO kanye ne-UP/ENTER kuphaneli engemuva, isibonisi sizobonisa i-ACAL. Dedela izinkinobho zombili.
3. Isibonisi sizobonisa ukulinganiswa okukhona ngokugqama kwedijithi engakwesokunxele.
   Cindezela inkinobho ethi PHEZULU/ENTER ukuze ushintshe idijithi ekhanyayo. Cindezela inkinobho OKULANDELAYO ukuze uye edijithini elandelayo.
4. Setha wonke amadijithi angu-4, bese ucindezela i-NEXT MENU futhi ukuze usethe iphoyinti ledesimali, izokhanya ukukhombisa ukuthi ikhethiwe. Cindezela inkinobho ethi UP/ENTER ukuze ukhethe okuthi x.xxx, xx.xx, xxx.x noma akukho desimali. Ukuze uthole ukunemba okungcono kakhulu kokuphumayo kwe-analog, zama ukusebenzisa wonke amadijithi angu-4 afana no-500.0 esikhundleni sika-500 nje.
5. Ngemva kokuba idesimali isimisiwe, cindezela OKULANDELAYO IMENU futhi, isibonisi sizobonisa i-Stor. Cindezela okuthi UP/ENTER ukuze ugcine ukulinganisa bese uphuma kumenyu yokusetha. Isibonisi sizoqhubeka nokubonisa i-Stor isikhashana bese sizobonisa kwenziwe umzuzwana. Bese umsebenzi ojwayelekile uyaqala futhi.
6. Uma ungafuni ukugcina ukulinganisa, cindezela OKULANDELAYO futhi futhi isibonisi sizobonisa Abrt. Cindezela okuthi UP/ENTER ukuze uchithe ephuma kumenyu yokulinganisa ngaphandle kokulondoloza.
7. Uma ucindezela OKULANDELAYO futhi kusibonisi se-Abrt, imenyu izobuyela ekuqaleni ngedijithi engakwesokunxele ekhethwe ngokugqama.
8. Uma ukulinganiswa kwesikali esigcwele kungaphansi kuka-103, isibonisi ngeke sikwazi ukubala ukulinganisa okuvumelekile, futhi sizobonisa i-cErr (iphutha lokulinganisa) ngemva kwemizuzwana embalwa. Ukulinganisa okukhona kuzogcinwa, futhi isibonisi sizobuyela ekusebenzeni okuvamile.

Kuya view ukulinganisa okukhona:

1. Cindezela inkinobho ethi IMENU OKULANDELAYO noma UP/ENTER (kodwa hhayi kokubili) kuphaneli yangemuva, isibonisi sizobonisa ukulinganisa okukhona kwesikali se-analogi esigcwele kuyilapho inkinobho ibanjelwe phansi. Dedela inkinobho ukuze ubuyele ekusebenzeni okuvamile.

Ukuhlola okukhiphayo kwe-analog:

1. Ngenkathi inkinobho OKULANDELAYO noma UP/ENTER kuphaneli engemuva icindezelwe, isibonisi sizobonisa ukulinganisa kwesikali esigcwele futhi okukhiphayo kwe-analogi kuzokuya esikalini esigcwele (5 V).
   Lokhu kungasetshenziselwa ukuhlola noma ukulinganisa okokusebenza okuxhunywe kokuphumayo kwe-analog.
2. Ngenkathi isibonisi sikumodi yokulinganisa (efakwe ngokucindezela izinkinobho OKULANDELAYO kanye ne-UP/ENTER) ukuphuma kwe-analog kuzoba ku-1 V.

I-SERAL INTERFACE

Bheka Ifomethi Yephothali Yezinga le-ELD kanye nefomethi yesignali 

• Ifomethi yesiginali esekelwayo yi-bidirectional serial (imigqa ehlukene ye-TX ne-RX), i-RS232 voltagamazinga e, 9600 baud, 8 bit, akukho ukulingana, 1 stop bit.
• Yonke imilayezo ilalela le fomethi elandelayo: [qalisa ukulandelana] [inani eliphelele lamabhayithi emlayezweni] [i-ID yomlayezo] [umthwalo wokukhokha – ozikhethela] [CRC] [ukumisa ukulandelana]
• Wonke amapharamitha wamabhayithi amaningi adluliselwa ku-big-endian (MSB kuqala)
• Qala ukulandelana: [0xFE][0xFE][0x24]
• Isamba senani lamabhayithi kumlayezo (ibhayithi elingu-1)
• I-ID yomlayezo (ibhayithi elingu-1)
• Ukukhokha (kuyakhetheka kuye ngomlayezo)
• I-CRC (ibhayithi elingu-1) = isamba esiqondile sawo wonke amabhayithi andulele, ancishisiwe abe yibhayithi elingu-1
• Misa ukulandelana: [0xFF][0xFF][0x2A]

Umlayezo Wombuzo we-SeeLeveL (ELD -> SeeLeveL)

• Inani: 0x00
• Ivumela i-ELD ukuthi ibuze idivayisi ye-SeeLeveL
• [0xFE][0xFE][0x24][0x09][0x00][0x29][0xFF][0xFF][0x2A]

Bheka Izimpendulo Zombuzo Weleveli (Bheka IzingaL -> I-ELD)

• Inani: 0x01
• Bona i-LeveL iphendula nge-ID yemodeli (ibhayithi elingu-1), i-H/W Rev (ibhayithi elingu-1), i-S/W Rev (amabhayithi angu-2), amandla e-alamu (ibhayithi elingu-1), nosekelo lwe-SN (ibhayithi elingu-1). Uma idivayisi ye-See LevelL isekela inombolo ye-serial ehlukile, izolandela (amabhayithi angu-8 ubude).
• Example: Bona i-ID yemodeli ye-LeveL = 0x01, i-hardware rev = 'E' (0x45), isofthiwe enkulu rev ​​= 0x05, i-rev encane = 0x09, akukho khono le-alamu = 0x00 (0x01 = i-alamu iyakwazi), inombolo ye-serial iyasekelwa = 0x01 (inombolo yomkhiqizo ayisekelwe = 0x00), kanye nenombolo ye-serial = 0x0102030405060708:
• [0xFE][0xFE][0x24][0x17][0x01][0x01][0x45][0x05][0x09][0x00][0x01] [0x01][0x02][0x03][0x04][0x05][0x06][0x07][0x08][0xB1][0xFF][0xFF] [0x2A]

Bheka umlayezo we-Leve Handshake Demand (Bona i-Leve -> ELD)

• Inani: 0x02, 1 byte payload
• I-ELD kufanele iphendule ngempendulo efanele enekhodi ukuze iqale noma iqhubeke nokudluliswa noma ukusakazwa kwamazinga oketshezi kusuka kudivayisi ye-SeeLeveL. Izimfuno zokuxhawula zizosakazwa ngezikhathi ezithile.
• Example:
• [0xFE][0xFE][0x24][0x0A][0x02][0x3E][0x6A][0xFF][0xFF][0x2A]

I-ELD Handshake Response (ELD -> See LevelL)

• Inani: 0x03, 1 ibhayithi yokukhokha
• Ukuze ubale impendulo, umthwalo okhokhelwayo usuka ku-See LevelL Handshake

I-Demand Message isetshenziswa njengekheli/i-offset ukulanda okuqukethwe kwethebula lokubheka:

• Impendulo ku-exampngenhla:
• [0xFE][0xFE][0x24][0x0A][0x03][0x85][0xB2][0xFF][0xFF][0x2A]
• Xhumana nezinsimbi ze-Garnet ku-1-800-617-7384 noma ku-info@garnetinstruments.com ukuze usethe ubudlelwano obufanele bokusebenzisana. Uma lokhu sekuqinisekisiwe, ithebula lempendulo yokuxhawula lizonikezwa.

Thumela Umlayezo Wezinga Le-Liquid (ELD -> Bona Izinga)

• Inani: 0x04, akukho ukukhokhelwa
• I-See Level iphendula ngeleveli eyodwa yoketshezi noma umlayezo wokudinga ukuxhawula izandla.
• [0xFE][0xFE][0x24][0x09][0x04][0x2D][0xFF][0xFF][0x2A]

Qala Umlayezo Wokusakaza Wezinga Le-Liquid (ELD -> SeeLeveL)

• Inani: 0x05, akukho ukukhokhelwa
• Bona i-LeveL iphendula ngezinga eliwuketshezi noma ngomlayezo wokudinga ukuxhawulana.
• [0xFE][0xFE][0x24][0x09][0x05][0x2E][0xFF][0xFF][0x2A]

Misa Umlayezo Wokusakaza Wezinga Le-Liquid (ELD -> Bona ileveli)

• Inani: 0x06, akukho ukukhokhelwa
• I-SeeLeveL izokhansela noma yikuphi ukusakazwa okwengeziwe kwezinga loketshezi.
• [0xFE][0xFE][0x24][0x09][0x06][0x2F][0xFF][0xFF][0x2A]

I-SeeLeveL Query Alarm Liquid Level Message (ELD -> SeeLeveL)

• Inani: 0x07, akukho ukukhokhelwa
• I-SeeLeveL izophendula ngempendulo yezinga le-alamu eliwuketshezi noma impendulo yephutha uma umsebenzi we-alamu ungasekelwe.
• [0xFE][0xFE][0x24][0x09][0x07][0x30][0xFF][0xFF][0x2A]

SeeLeveL Liquid Alarm Level Response (SeeLeveL -> ELD)

• Inani: 0x08, 7 byte payload
• I-SeeLeveL iphendula ngezinga le-alamu yoketshezi (amabhayithi angu-4 = i-int32 engasayiniwe), inombolo yamadijithi kwesokudla sedesimali (ibhayithi elingu-1), uhlobo lwe-alamu (ibhayithi elingu-1; eliphezulu = 0x01, eliphansi = 0x00), nokuthi ingabe izinga loketshezi likhona yini okwamanje. i-alamu (1 byte; i-alamu iyasebenza = 0x01, ayikho i-alamu = 0x00).
• Example: izinga le-alamu eliwuketshezi = 347.56, uhlobo lwe-alamu = izinga eliphansi, i-alamu iyasebenza:
• [0xFE][0xFE][0x24][0x10][0x08][0x00][0x00][0x87][0xC4][0x02][0x00] [0x01][0x86][0xFF][0xFF][0x2A]

Umlayezo Wesimo Se-alamu Ye-SeeLeveL (ELD -> SeeLeveL)

• Inani: 0x09, akukho ukukhokhelwa
• I-SeeLeveL izophendula ngesimo se-alamu samanje noma impendulo yephutha uma umsebenzi we-alamu ungasekelwe.
• [0xFE][0xFE][0x24][0x09][0x09][0x32][0xFF][0xFF][0x2A]

SeeLeveL Query Alamu Status Response (BonaLeveL -> ELD)

• Inani: 0x0A, 1 byte payload
• I-SeeLeveL iphendula ngesimo se-alamu samanje (ibhayithi elingu-1; i-alamu esebenzayo = 0x01, ayikho i-alamu = 0x00).
• Example: i-alamu iyasebenza:
• [0xFE][0xFE][0x24][0x0A][0x0A][0x35][0xFF][0xFF][0x2A]

I-SeeLeveL Error Response (SeeLeveL -> ELD)

• Inani: 0x0F , 1 byte payload
• I-SeeLeveL ikhipha le mpendulo uma umyalo/umlayezo ungasekelwe. I-Payload = ikhodi yomlayezo engasekelwe.
• Example: I-ELD ngaphambilini ikhiphe i-SeeLeveL Query Alarm Liquid Level Message (0x07) kudivayisi ye-SeeLevel engawasekeli ama-alamu:
• [0xFE][0xFE][0x24][0x0A][0x0F ][0x07][0x40][0xFF][0xFF][0x2A]

Umlayezo Wombiko Wezinga Le-SeeLeveL Liquid (SeeLeveL -> ELD)

• Inani: 0x10, 6 noma 7 byte payload, kuye ngokuthi ama-alamu ayasekelwa yini
• I-SeeLeveL idlulisa ileveli yoketshezi (amabhayithi angu-4 = i-int32 engasayiniwe), inombolo yamadijithi kwesokudla sedesimali (ibhayithi elingu-1), isimo sephutha lokubona (ibhayithi elingu-1), nesimo se-alamu (okwamanje iyasebenza = 0x01, hhayi esimweni se-alamu = 0x00) . Inkambu yesimo se-alamu iyinketho futhi ayidluliswa yi-SeeLevel
  idivayisi engasekeli ama-alamu. Isimo sephutha lokubuka: akukho ukukhanya = 0x00, izinga lokukhanya eliphansi = 0x01, ukukhanya kwelanga = 0x02, alikho iphutha = 0x10. Esimeni lapho isimo sephutha le-optical SINGENAphutha, ileveli yoketshezi/inombolo yamadijithi kwesokudla sedesimali ishaywa indiva.
• Example: i-liquid level = 1,083.1, alikho iphutha lokubona, ama-alamu awasekelwe.
• Ngeleveli yoketshezi, amabhayithi okuqala angu-4 omthwalo okhokhelwayo amelela inani le-hex leleveli, hhayi inani le-BCD.
• [0xFE][0xFE][0x24][0x0F][0x10][0x00][0x00][0x2A][0x4F][0x01][0x10] [0xC9][0xFF][0xFF][0x2A]

Sakaza:

• Kwenziwe ngemva kwakho konke ukwamukelwa kwedatha (okuhle noma okubi) noma akukho sikhathi sokuvala isignali ye-808P2 kanye ne-810PS2 gauge. Kwenziwa ngemva kokudluliswa kwedatha okuyimpumelelo okungu-8 kumageji angu-806B/806Bi.
• Njalo ekusakazweni okungu-25 (cishe imizuzwana engu-20) isicelo sokuxhawulana sithunyelwa ukuze kuvunyelwe ukusakazwa okuqhubekayo.
• Ekuvuthweni kwamandla, uma ukusakaza kunikwe amandla, isicelo sokuxhawula sithunyelwa ukuze kuvunyelwe ukusakazwa.
• AKUKUDINGI ukuxhawula ukuze kumiswe ukusakaza.
• Uma isicelo sokuxhawula singaphendulwa ngendlela efanele, ukusakazwa kuyamiswa.
• Izicelo zokuQalisa nokumisa ukusakaza aziphendulwa ngokusobala, ukuqala noma ukumiswa kokusakaza kuyisiqinisekiso.

I-ELD icela ukuqinisekiswa kokuxhawula:

• Qala ukusakaza bese Thumela ileveli yoketshezi
• Isicelo sokuxhawula senziwa njalo lapho esisodwa salezi zicelo sitholwa. Ukuxhawula kufanele kuphendulwe kukho phakathi kuka-500ms, noma-ke impendulo ithathwa njengengavumelekile futhi umlayezo wephutha uzothunyelwa usuka ku-SeeLeveL uye ku-ELD ukuze uthole izimpendulo ngemuva kwesikhathi.

Ifomethi yokuxhawula:

• Isicelo esivela ku-ELD samukelwe yi-SeeLeveL
• I-SeeLeveL iphendula ngesicelo sokuxhawula
• I-ELD ithumela impendulo yokuxhawula
• I-SeeLeveL ithumela impendulo esicelweni sokuqala se-ELD uma impendulo yokuxhawula ilungile.

Ama-alamu awasekelwe okwamanje. Ngokuzayo, uma bethi:

• Okuqukethwe komlayezo 0x08 indawo yokusethwa kwe-alamu, i-alamu yezinga eliphezulu noma eliphansi, kanye nesimo se-alamu samanje.

Umbuzo we-SeeLeveL we-Handshake Frequency during Broadcast Message (ELD -> SeeLeveL)

• Inani: 0x2D
• Lokhu kucela imvamisa yokuxhawula, impendulo ikhonjisiwe ngezansi.
• [0xFE][0xFE][0x24][0x09][0x2D][0x56][0xFF][0xFF][0x2A]

Imvamisa Yokuxhawula Ngesandla Phakathi Nempendulo Yokusakaza (SeeLeveL -> ELD)

• Inani: 0x2E, 1 byte payload
• Ifrikhwensi ingasukela ekusakazeni oku-1 kuye kwayi-126 ngesicelo ngasinye sokuxhawula. Inombolo iboniswa nge-hex ukusuka ku-0x02 ukuya ku-0x7F (inani eliphelele lokudluliselwa ngakunye ngokuxhawula, kuhlanganise nokuxhawula).
• Ifomethi yomlayezo, imvamisa ngu-20 (0x14):
• [0xFE][0xFE][0x24][0x0A][0x2E][0x14][0x6C][0xFF][0xFF][0x2A]

UMHLAHLANDLELA WOKUXOXA IZINKINGA

Ikhodi Yephutha	Imbangela	Isixazululo
	Isibonisi asitholi isignali kusuka ku-806-B, 806-Bi, 808-P2 noma 810-PS2 gauge. Okukhiphayo kwe-analogi kuzoya ku-0 V. Lokhu kuhlukanisa isimo sephutha kusukela kusimo sokubonisa esinguziro se-1 V.	Hlola izintambo nokubeka phansi ukuze uthole amaphutha noma uxhumo olubi. Futhi qinisekisa ukuthi i-806-B, 806-Bi, 808-P2 noma i-810-PS2 isebenza kahle.
	Isibonisi sithola idatha eyonakele futhi okukhiphayo kwe-analog kuzoya ku-0 V.
	Isibonisi asikwazi ukuxhumana nememori yaso.	Isibonisi sizodinga ukuseviswa noma ukushintshwa.
	Isibonisi asikwazi ukuxhumana nesiguquli saso sedijithali ukuya ku-analog.

Ukunemba:
Okukhiphayo kwe-analogi kunokunemba okungu-± 0.25% yenani lesikali esigcwele, ngakho-ke noma yiliphi inani lokukhiphayo kufanele libe phakathi kuka-0.01 V yenani "elikahle". Akukho ukulungiswa komsebenzisi okungenziwa ukuze kushintshwe ukunemba.

Njenganoma iyiphi isistimu yedijithali, kukhona amaphutha okuvala kanye nokuncishiswa atholakala kunqubo yezibalo. Kodwa-ke, njengoba i-SEELEVEL Access™ isebenzisa i-10 bit digital convertor to analog, inokunemba okwanele ukuvumela ukucaca okugcwele kwegeji yeloli ukuthi kubonakale. Qaphela ukuthi igeji yeloli ethumela idatha inokulungiswa kwamabhithi angu-8 kuphela (1/3” izinhlelo).

IMICIMBI

Ukunemba kokukhiphayo kwe-analogi:	0.25% yenani lesikali esigcwele ± 0.01 V
Ubuncane bokuhlinzeka ngevolumutage:	+10.0 V
I-drain yamanje:	150 mA noma ngaphansi
Ibanga lokushisa:	-40°C kuya +60°C (-40°F kuya +140°F)
Indawo ebiyelwe:	Okubalulekile: I-Aluminium Usayizi: 68 mm ububanzi x 29 mm ukuphakama x 87 mm ukushona (2.7″ ububanzi x 1.1″ high x 3.4″ ukujula)
Uhlobo lokubonisa:	I-LED enamadijithi angu-4, ingxenye engu-7 yamadijithi angu-10 mm (0.4″) aphezulu
Amandla okubonisa:	Isebenza ngamaloli angu-12 V
Izintambo:	Ukufakwa kukagesi ngezintambo ezingu-6: amandla angu-12 V (obomvu), aphansi (amnyama), isignali yegeji (ephuzi), okukhiphayo kwe-analog (okumhlophe/okuluhlaza okwesibhakabhaka), i-RS-232 serial receive (purple), kanye ne-RS-232 serial transmit (grey)
I-RS-232 ivolumu yokuphumayotagIzinga le-e:	+/- 4.0 V ubuncane
Ifomethi ye-serial ye-RS-232:	9600 XNUMX ngenhla Imodi yefomethi ye-NRZ evamile/isikhala ngamabhithi angu-8 I-tx engaguquki Ayikho i-parity Akukho uhlamvu lwekhefu Okokuqala kancane I-stop bit eyodwa

ULWAZI LWESEVISI NEWARANTI

Iwaranti izosebenza kuphela uma iwaranti ibhaliswe ku-inthanethi kusukela ekubhalisweni kwe-Garnet Instruments web ikhasi.

Iya ku-inthanethi ukuze garnetinstruments.com/support/ bese ukhetha "Bhalisa Iwaranti".

UMNQWANZO WESIQINISEKISO KU-Hardware

I-Garnet Instruments iqinisekisa ukuthi okokusebenza okukhiqizwe i-Garnet ukuthi kungabi nasici empahleni kanye nokusebenza ngaphansi kokusetshenziswa okujwayelekile kanye nesevisi isikhathi esiyiminyaka emithathu kusukela osukwini lokuthengisa ku-Garnet noma Kumdayisi Ogunyaziwe. Isikhathi sewaranti sizoqala kusukela ngosuku lokuthenga noma lokufakwa njengoba kukhonjisiwe ekhadini lewaranti. Ngaphansi kwalezi ziqinisekiso, i-Garnet izobophezeleka kuphela ekulahlekelweni kwangempela noma ngomonakalo owenzekile bese kuphela ngokwezinga lentengo ye-invoyisi ye-Garnet yomkhiqizo. I-Garnet ngeke ibophezeleke kunoma yikuphi ukukhokhiswa kwabasebenzi ngomonakalo ongaqondile, okhethekile, noma owumphumela. I-Garnet ngeke ibe nesibopho sanoma yikuphi ukususwa kanye/noma ukufakwa kabusha kwemishini ye-Garnet enesici. Lezi ziqinisekiso ngeke zisebenze kunoma yikuphi ukukhubazeka noma omunye umonakalo kunoma iyiphi impahla ye-Garnet eshintshiwe nomaampifakwe nanoma ubani omunye ngaphandle kwabamele imboni ye-Garnet. Kuzo zonke izimo, i-Garnet izogunyaza kuphela imikhiqizo ye-Garnet esetshenziselwa izinhlelo ezamukelekayo ku-Garnet futhi ngaphakathi kwemininingwane yobuchwepheshe yomkhiqizo othile. Ngaphezu kwalokho, i-Garnet izogunyaza kuphela leyo mikhiqizo efakiwe futhi yanakekelwa ngokuya ngemininingwane yefekthri ye-Garnet.

UKULINGISA NGEZIQINISEKISO

Lezi ziqinisekiso yizona kuphela iziqinisekiso, ezivezwayo noma ezishiwoyo, lapho imikhiqizo ethengiswa khona i-Garnet ne-Garnet ingenzi siqinisekiso sokuthengiseka noma ukufaneleka kwanoma iyiphi injongo mayelana nemikhiqizo edayisiwe. Imikhiqizo ye-garnet noma izingxenye zayo okucatshangwa ukuthi azisebenzi kahle umthengi phakathi nesikhathi esishiwo sewaranti kufanele ibuyiselwe kumthengisi, umsabalalisi wendawo, noma ngqo ku-Garnet ukuze ihlolwe futhi isetshenziswe. Noma nini lapho ukuhlolwa okuqondile kwasefekthri, isevisi noma ukushintshwa kudingekile, ikhasimende kufanele kuqala, ngencwadi noma ngocingo, lithole I-Returned Material Authorization (RMA) ku-Garnet Instruments ngokuqondile. Akukho lutho olungabuyiselwa ku-Garnet ngaphandle kwenombolo ye-RMA eyabelwe yona noma ngaphandle kokugunyazwa kwefekthri okufanele. Noma yiziphi izimbuyiselo kufanele zibuyiswe yimpahla ekhokhelwa kusengaphambili kwa: Garnet Instruments, 286 Kaska Road, Sherwood Park, Alberta, T8A 4G7. Izinto ezigunyaziwe ezibuyiswayo zizokhandwa noma zishintshwe ngokubona kwe-Garnet Instruments. Noma yiziphi izinto ze-Garnet ezingaphansi Kwenqubomgomo Yesiqinisekiso Se-Garnet ezibhekwa njengezingenakulungiseka yi-Garnet Instruments zizoshintshwa ngaphandle kwenkokhiso noma kuzokhishwa ikhredithi yaleyo nto kuncike esicelweni sekhasimende.

Uma unesicelo sewaranti noma uma impahla idinga ukuseviswa, thintana nomdayisi wokufaka. Uma udinga ukuxhumana ne-Garnet, singafinyelelwa ngale ndlela elandelayo:

ECANADA
Izinsimbi ze-Garnet
286 Kaska Road
I-Sherwood Park, AB T8A 4G7
ECANADA
I-imeyili: info@garnetinstruments.com

I-UNITED STATES
Inkampani Garnet US Inc
5360 Granbury Road
Granbury, TX 76049
USA
I-imeyili: infous@garnetinstruments.com

Amadokhumenti / Izinsiza

I-GARNET T-DP0301-C SEELEVEL Iphothali Yedatha Yokufinyelela kanye Nesibonisi Esikude [pdf] Imaniwali yosebenzisayo Iphothali Yedatha ye-SEELEVEL ne-Remote Display, UKUFINYELELA KWE-SEELEVEL, Iphothali Yedatha kanye Nokubonisa Okukude, Iphothali Yedatha, Isibonisi Esikude, T-DP0301-C

Izithenjwa

• Imaniwali yosebenzisayo