I-GARNET T-DP0301-A Iphothali Yedatha kanye Nesibonisi Esikude

ISINGENISO

Siyakuhalalisela ngokuthenga i-Garnet Instruments SEELEVEL Access™ Data Portal. I-SEELEVEL Access™ incoma i-SEELEVEL Annihilator™ 806-B, 806-Bi, noma i-SEELEVEL Special™ 808-P2 kanye namageji e-SeeLeveL ProSeries II 810-PS2 ngokukunikeza ukufunda kwevolumu eyengeziwe kukhebhu yeloli lakho. Ngaphezu kokuhlinzeka ngokufundwa kwezinga lethangi, i-SEELEVEL Access™ ihlinzeka ngokuphuma kwe-analog engu-4-20 mA ngokulingana nevolumu yoketshezi olubonisiwe. Lokhu okukhiphayo kwe-analogi kungasetshenziswa ukuxhumana nezinga lethangi kwezinye izingcezu zemishini efana nezinhlelo zokuphatha imikhumbi noma Amadivayisi Wokungena Nge-elekthronikhi (ELD). Inani eliphelele lesikali sokukhiphayo kwe-analogi lingasethwa kusetshenziswa izinkinobho ezingemuva kwesibonisi, azikho izinto zokusebenza ezengeziwe ezidingekayo ukuze kulinganiswe. I-SEELEVEL Access™ iqukethe ne-serial RS-232 interface evumela ukuphathwa kwemikhumbi noma amasistimu e-ELD ukuthi aqoqe idatha yevolumu yoketshezi kugeji. I-interface iyi-duplex egcwele futhi iqukethe izici zokuphepha zokuvimbela ukufinyelela okungagunyaziwe.

Isibonisi se-SEELEVEL Access™ siklanyelwe ukumelana nokudlidliza kanye nokushaqeka okuhlangatshezwana nakho ezinhlelweni zeselula. Ngenkathi i-808-P2 ne-810-PS2 isebenza kumabhethri angaphakathi, (amandla weloli we-12 volt asetshenziselwa ukusebenzisa ukukhanya kwangemuva nama-alamu angaphandle), isibonisi se-SEELEVEL Access sisebenza ngamandla weloli we-12V.

IZICI

I-SEELEVEL Access™ yakhelwe ngokukhethekile izinhlelo zokusebenza ezithile kanye nezici ezithile:

Izici zokufinyelela ezijwayelekile ze-SEELEVEL

1. Isignali ephakathi kwesibonisi esingu-806-B, 806-Bi, 808-P2 noma 810-PS2 kanye ne-SEELEVEL Access™ ifakwe ikhodi yedijithali ukuze umugqa wesiginali uxhumeke kusetshenziswa ipulagi ye-trailer yamaphini angu-7 evamile.
2. Isibonisi sisebenza ngamandla weloli angu-12 volt, futhi sidonsa ngaphansi kuka-150 mA.
3. Idizayini yedijithali yonke (ngaphandle kokuphumayo kwe-4-20 mA) iqeda ukukhukhuleka kokufunda noma ukuwohloka, iqinisekisa ukunemba kwesikhathi eside ngaphansi kwazo zonke izimo zokusebenza.
4. Ukusebenza kusuka -40 °C kuya +60 °C (-40 °F kuya +140 °F) izinga lokushisa le-ambient.
5. Ukufakwa kalula nokusevisa ngewaranti enomkhawulo yonyaka owodwa.
   Izici ezengeziwe ze-SEELEVEL zokufinyelela ku-T-DP0301-A
6. I-analog engu-4-20 mA okukhiphayo, no-4 mA ehambisana nevolumu enguziro ebonisiwe, kanye no-20 mA ohambisana nevolumu egcwele ebonisiwe ehlelwe kusibonisi esikude.
7. Isixhumi esibonakalayo se-RS-232 esitholakalayo ukuze sixhume ezinhlobonhlobo ze-ELD noma amasistimu okuphatha izimoto.
8. I-SEELEVEL Access™ ihlinzeka ngesibonisi se-LED esifundeka kalula ngaphakathi kokuhlangene, onqenqemeni-view indawo ebiyelwe, elungiselelwe ukukhwezwa kwe-top-of-dash noma ngaphezulu kwekhonsoli. Isibonisi sifakwe endaweni ebiyelwe nge-aluminium engu-2.7” ububanzi x 1.1” ukuphakama x 3.4” ukujula (68 mm ububanzi x 29 mm ukuphakama x 87 mm. ukushona).
9. Iswishi yenkinobho ye-dimmer yenza isisebenzisi sikwazi ukulawula ukukhanya.
10. Ukufakwa kukagesi kwezintambo ezi-6 okulula - amandla angu-12V (obomvu), aphansi (amnyama), isignali yegeji (ephuzi), okukhiphayo kwe-analog (okumhlophe/okuluhlaza okwesibhakabhaka), ukwamukela okuwuchungechunge (okunsomi) kanye ne-serial transmit (grey).

IMIDLALO YEZINKHI

I-SEELEVEL Access™ yakhelwe ukuthi ifakwe kalula nge-806-B, 806-Bi, 808-P2 noma 810-PS2 uchungechunge lwegeji ye-SEELEVEL™. Imiyalo yokufaka iyatholakala ku-inthanethi ku- www.garnetinstruments.com.

I-SEELEVEL Access™ Remote Display kulula ukuyifaka:

808-P2 Wiring Umdwebo

810-PS2 Umdwebo Wezintambo

806-B Umdwebo Wezintambo

806-Bi Wiring Umdwebo

BONISA UHLELO

Isibonisi se-SEELEVEL Access™ sibonisa izinga lethangi ngokuphinda ulwazi olukhonjiswe ku-806-B, 806-Bi, 808-P2 noma 810-PS2 gauge. Okukhiphayo kwe-analog okungu-4-20 mA kubalwa kusukela kuzinga lokubonisa ngokuphumayo okungu-4 mA okuhambisana nezinga lokubonisa likaziro, kanye nokuphumayo okungu-20 mA okuhambisana nezinga eligcwele lesikali elihlelwe kusibonisi se-SEELEVEL Access™. Okwesiboneloample, uma isikali esigcwele sihlelwe ukuthi sibe ngu-500.0, khona-ke inani lokubonisa elingu-400.0 lizoholela ekukhishweni kwe-analog okungu-16.80 mA. Isibonisi sizobona indawo yedesimali futhi silungise okukhiphayo ngokufanele, ngakho kulesi example ivelu yokubonisa engu-400 izophinda iphumele ekukhishweni kwe-analog okungu-16.80 mA.

Ukusetha ileveli yesikali esigcwele:

1. Nquma umthamo omkhulu wevolumu ongaboniswa bese ukhetha inani eliphelele lesikali elilingana noma likhulu kunale volumu.
2. Cindezela kokubili izinkinobho OKULANDELAYO kanye ne-UP/ENTER kuphaneli engemuva, isibonisi sizobonisa i-ACAL. Dedela izinkinobho zombili.
3. Isibonisi sizobonisa ukulinganiswa okukhona ngokugqama kwedijithi engakwesokunxele. Cindezela inkinobho ethi PHEZULU/ENTER ukuze ushintshe idijithi ekhanyayo. Cindezela inkinobho OKULANDELAYO ukuze uye edijithini elandelayo.
4. Setha wonke amadijithi angu-4, bese ucindezela i-NEXT MENU futhi ukuze usethe iphoyinti ledesimali, izokhanya ukukhombisa ukuthi ikhethiwe. Cindezela inkinobho ethi UP/ENTER ukuze ukhethe okuthi x.xxx, xx.xx, xxx.x noma akukho desimali. Ukuze uthole ukunemba okungcono kakhulu kokuphumayo kwe-analog, zama ukusebenzisa wonke amadijithi angu-4 afana no-500.0 esikhundleni sika-500 nje.
5. Ngemva kokuba idesimali isimisiwe, cindezela OKULANDELAYO IMENU futhi, isibonisi sizobonisa i-Stor. Cindezela okuthi UP/ENTER ukuze ugcine ukulinganisa bese uphuma kumenyu yokusetha. Isibonisi sizoqhubeka nokubonisa i-Stor isikhashana bese sizobonisa kwenziwe umzuzwana. Bese umsebenzi ojwayelekile uyaqala futhi.
6. Uma ungafuni ukugcina ukulinganisa, cindezela OKULANDELAYO futhi futhi isibonisi sizobonisa Abrt. Cindezela okuthi UP/ENTER ukuze uchithe ephuma kumenyu yokulinganisa ngaphandle kokulondoloza.
7. Uma ucindezela OKULANDELAYO futhi kusibonisi se-Abrt, imenyu izobuyela ekuqaleni ngedijithi engakwesokunxele ekhethwe ngokugqama.
8. Uma ukulinganiswa kwesikali esigcwele kungaphansi kuka-103, isibonisi ngeke sikwazi ukubala ukulinganisa okuvumelekile, futhi sizobonisa i-cErr (iphutha lokulinganisa) ngemva kwemizuzwana embalwa. Ukulinganisa okukhona kuzogcinwa, futhi isibonisi sizobuyela ekusebenzeni okuvamile.

Kuya view ukulinganisa okukhona:

1. Cindezela inkinobho ethi IMENU OKULANDELAYO noma UP/ENTER (kodwa hhayi kokubili) kuphaneli yangemuva, isibonisi sizobonisa ukulinganisa okukhona kwesikali se-analogi esigcwele kuyilapho inkinobho ibanjelwe phansi. Dedela inkinobho ukuze ubuyele ekusebenzeni okuvamile.

Ukuhlola okukhiphayo kwe-analog:

1. Nakuba inkinobho OKULANDELAYO noma UP/ENTER kuphaneli engemuva icindezelwe, isibonisi sizobonisa ukulinganiswa kwesikali esigcwele futhi okukhiphayo kwe-analogi kuzokuya esikalini esigcwele (20 mA). Lokhu kungasetshenziselwa ukuhlola noma ukulinganisa okokusebenza okuxhunywe kokuphumayo kwe-analog.
2. Ngenkathi isibonisi sikumodi yokulinganisa (efakwe ngokucindezela izinkinobho OKULANDELAYO kanye ne-UP/ENTER) ukuphuma kwe-analog kuzoba ku-4mA.

I-SERAL INTERFACE

Ifomethi yephothali ye-SeeLeveL ELD kanye nefomethi yesignali

• Ifomethi yesiginali esekelwayo yi-bidirectional serial (imigqa ehlukene ye-TX ne-RX), i-RS232 voltagamazinga e, 9600 baud, 8 bit, akukho ukulingana, 1 stop bit.
• Yonke imilayezo ilalela le fomethi elandelayo: [qalisa ukulandelana] [inani eliphelele lamabhayithi emlayezweni] [i-ID yomlayezo] [umthwalo wokukhokha – ozikhethela] [CRC] [ukumisa ukulandelana]
• Wonke amapharamitha wamabhayithi amaningi adluliselwa ku-big-endian (MSB kuqala)
• Qala ukulandelana: [0xFE][0xFE][0x24]
• Isamba senani lamabhayithi kumlayezo (ibhayithi elingu-1)
• I-ID yomlayezo (ibhayithi elingu-1)
• Ukukhokha (kuyakhetheka kuye ngomlayezo)
• I-CRC (ibhayithi elingu-1) = isamba esiqondile sawo wonke amabhayithi andulele, ancishisiwe abe yibhayithi elingu-1
• Misa ukulandelana: [0xFF][0xFF][0x2A]

Umlayezo Wombuzo we-SeeLeveL (ELD -> SeeLeveL)

• Inani: 0x00
• Ivumela i-ELD ukuthi ibuze idivayisi ye-SeeLeveL
• [0xFE][0xFE][0x24][0x09][0x00][0x29][0xFF][0xFF][0x2A]

SeeLeveL Query Response (SeeLeveL -> ELD)

• Inani: 0x01
• I-SeeLeveL iphendula nge-ID yemodeli (ibhayithi elingu-1), i-H/W Rev (ibhayithi elingu-1), i-S/W Rev (amabhayithi angu-2), amandla e-alamu (ibhayithi elingu-1), nosekelo lwe-SN (ibhayithi elingu-1). Uma idivayisi ye-SeeLeveL isekela inombolo ye-serial ehlukile, izolandela (amabhayithi angu-8 ubude).
• Example: I-ID yemodeli ye-SeeLeveL = 0x01, i-hardware rev = 'E' (0x45), i-software enkulu rev ​​= 0x05, i-rev encane = 0x09, akukho khono le-alamu = 0x00 (0x01 = i-alamu iyakwazi), inombolo ye-serial iyasekelwa = 0x01 (inombolo yomkhiqizo ayitholakali isekelwe = 0x00), kanye nenombolo ye-serial = 0x0102030405060708:
• [0xFE][0xFE][0x24][0x17][0x01][0x01][0x45][0x05][0x09][0x00][0x01] [0x01][0x02][0x03][0x04][0x05][0x06][0x07][0x08][0xB1][0xFF][0xFF] [0x2A]

SeeLeveL Handshake Demand Message (SeeLeveL -> ELD)

• Inani: 0x02, 1 byte payload
• I-ELD kufanele iphendule ngempendulo efanele enekhodi ukuze iqale noma iqhubeke nokudluliswa noma ukusakazwa kwamazinga oketshezi kusuka kudivayisi ye-SeeLeveL. Izimfuno zokuxhawula zizosakazwa ngezikhathi ezithile.
• Example:
• [0xFE][0xFE][0x24][0x0A][0x02][0x3E][0x6A][0xFF][0xFF][0x2A]

I-ELD Handshake Response (ELD -> SeeLeveL)

• Inani: 0x03, 1 byte payload
• Ukuze ubale impendulo, umthwalo okhokhelwayo ovela ku-SeeLeveL Handshake Demand Message usetshenziswa njengekheli/offset ukulanda okuqukethwe kwethebula lokubheka:
• Impendulo ku-exampngenhla:
• [0xFE][0xFE][0x24][0x0A][0x03][0x85][0xB2][0xFF][0xFF][0x2A]
• Xhumana nezinsimbi ze-Garnet ku-1-800-617-7384 noma ku info@garnetinstruments.com ukumisa ubudlelwano bokusebenza obufanelekile. Uma lokhu sekuqinisekisiwe, ithebula lempendulo yokuxhawula lizonikezwa.

Thumela Umlayezo Wezinga Le-Liquid (ELD -> SeeLeveL)

• Inani: 0x04, akukho ukukhokhelwa
• I-SeeLeveL iphendula ngeleveli eyodwa yoketshezi noma umlayezo wokudinga ukuxhawula izandla.
• [0xFE][0xFE][0x24][0x09][0x04][0x2D][0xFF][0xFF][0x2A]

Qala Umlayezo Wokusakaza Wezinga Le-Liquid (ELD -> SeeLeveL)

• Inani: 0x05, akukho ukukhokhelwa
• I-SeeLeveL iphendula ngezinga eliwuketshezi noma ngomlayezo wokudinga ukuxhawulana.
• [0xFE][0xFE][0x24][0x09][0x05][0x2E][0xFF][0xFF][0x2A]

Misa Umlayezo Wokusakaza Wezinga Le-Liquid (ELD -> SeeLeveL)

• Inani: 0x06, akukho ukukhokhelwa
• I-SeeLeveL izokhansela noma yikuphi ukusakazwa okwengeziwe kwezinga loketshezi.
• [0xFE][0xFE][0x24][0x09][0x06][0x2F][0xFF][0xFF][0x2A]

I-SeeLeveL Query Alarm Liquid Level Message (ELD -> SeeLeveL)

• Inani: 0x07, akukho ukukhokhelwa
• I-SeeLeveL izophendula ngempendulo yezinga le-alamu eliwuketshezi noma impendulo yephutha uma umsebenzi we-alamu ungasekelwe.
• [0xFE][0xFE][0x24][0x09][0x07][0x30][0xFF][0xFF][0x2A]

SeeLeveL Liquid Alarm Level Response (SeeLeveL -> ELD)

• Inani: 0x08, 7 byte payload
• I-SeeLeveL iphendula ngezinga le-alamu yoketshezi (amabhayithi angu-4 = i-int32 engasayiniwe), inombolo yamadijithi kwesokudla sedesimali (ibhayithi elingu-1), uhlobo lwe-alamu (ibhayithi elingu-1; eliphezulu = 0x01, eliphansi = 0x00), nokuthi ingabe izinga loketshezi likhona yini okwamanje. i-alamu (1 byte; i-alamu iyasebenza = 0x01, ayikho i-alamu = 0x00).
• Example: izinga le-alamu eliwuketshezi = 347.56, uhlobo lwe-alamu = izinga eliphansi, i-alamu iyasebenza:
• [0xFE][0xFE][0x24][0x10][0x08][0x00][0x00][0x87][0xC4][0x02][0x00] [0x01][0x86][0xFF][0xFF][0x2A]

Umlayezo Wesimo Se-alamu Ye-SeeLeveL (ELD -> SeeLeveL)

• Inani: 0x09, akukho ukukhokhelwa
• I-SeeLeveL izophendula ngesimo se-alamu samanje noma impendulo yephutha uma umsebenzi we-alamu ungasekelwe.
• [0xFE][0xFE][0x24][0x09][0x09][0x32][0xFF][0xFF][0x2A]

SeeLeveL Query Alamu Status Response (BonaLeveL -> ELD)

• Inani: 0x0A, 1 byte payload
• I-SeeLeveL iphendula ngesimo se-alamu samanje (ibhayithi elingu-1; i-alamu esebenzayo = 0x01, ayikho i-alamu = 0x00).
• Example: i-alamu iyasebenza:
• [0xFE][0xFE][0x24][0x0A][0x0A][0x35][0xFF][0xFF][0x2A]

I-SeeLeveL Error Response (SeeLeveL -> ELD)

• Inani: 0x0F , 1 byte payload
• I-SeeLeveL ikhipha le mpendulo uma umyalo/umlayezo ungasekelwe. I-Payload = ikhodi yomlayezo engasekelwe.
• Example: I-ELD ngaphambilini ikhiphe i-SeeLeveL Query Alarm Liquid Level Message (0x07) kudivayisi ye-SeeLevel engasekeli ama-alamu:
• [0xFE][0xFE][0x24][0x0A][0x0F ][0x07][0x40][0xFF][0xFF][0x2A]

Umlayezo Wombiko Wezinga Le-SeeLeveL Liquid (SeeLeveL -> ELD)

• Inani: 0x10, 6 noma 7 byte payload, kuye ngokuthi ama-alamu ayasekelwa yini
• I-SeeLeveL idlulisa ileveli yoketshezi (amabhayithi angu-4 = i-int32 engasayiniwe), inombolo yamadijithi kwesokudla sedesimali (ibhayithi elingu-1), isimo sephutha lokubona (ibhayithi elingu-1), nesimo se-alamu (okwamanje iyasebenza = 0x01, hhayi esimweni se-alamu = 0x00) . Inkundla yesimo se-alamu iyinketho futhi ayidluliswa idivayisi ye-SeeLevel engawasekeli ama-alamu. Isimo sephutha lokubuka: akukho ukukhanya = 0x00, izinga lokukhanya eliphansi = 0x01, ukukhanya kwelanga = 0x02, alikho iphutha = 0x10. Esimeni lapho isimo sephutha le-optical SINGENAphutha, ileveli yoketshezi/inombolo yamadijithi kwesokudla sedesimali ishaywa indiva.
• Exampi-le: i-liquid level = 1,083.1, alikho iphutha lokubuka, ama-alamu awasekelwe.
• Ngeleveli yoketshezi, amabhayithi okuqala angu-4 omthwalo okhokhelwayo amelela inani le-hex leleveli, hhayi inani le-BCD.
• [0xFE][0xFE][0x24][0x0F][0x10][0x00][0x00][0x2A][0x4F][0x01][0x10] [0xC9][0xFF][0xFF][0x2A]

Sakaza:

• Kwenziwe ngemva kwakho konke ukwamukelwa kwedatha (okuhle noma okubi) noma akukho sikhathi sokuvala isignali ye-808P2 kanye ne-810PS2 gauge. Kwenziwa ngemva kokudluliswa kwedatha okuyimpumelelo okungu-8 kumageji angu-806B/806Bi.
• Njalo ekusakazweni okungu-25 (cishe imizuzwana engu-20) isicelo sokuxhawulana sithunyelwa ukuze kuvunyelwe ukusakazwa okuqhubekayo.
• Ekuvuthweni kwamandla, uma ukusakaza kunikwe amandla, isicelo sokuxhawula sithunyelwa ukuze kuvunyelwe ukusakazwa.
• AKUKUDINGI ukuxhawula ukuze kumiswe ukusakaza.
• Uma isicelo sokuxhawula singaphendulwa ngendlela efanele, ukusakazwa kuyamiswa.
• Izicelo zokuQalisa nokumisa ukusakaza aziphendulwa ngokusobala, ukuqala noma ukumiswa kokusakaza kuyisiqinisekiso.

I-ELD icela ukuqinisekiswa kokuxhawula:

• Qala ukusakaza bese Thumela ileveli yoketshezi
• Isicelo sokuxhawula senziwa njalo lapho esisodwa salezi zicelo sitholwa. Ukuxhawula kufanele kuphendulwe kukho phakathi kuka-500ms, noma-ke impendulo ithathwa njengengavumelekile futhi umlayezo wephutha uzothunyelwa usuka ku-SeeLeveL uye ku-ELD ukuze uthole izimpendulo ngemuva kwesikhathi.

Ifomethi yokuxhawula:

• Isicelo esivela ku-ELD samukelwe yi-SeeLeveL
• I-SeeLeveL iphendula ngesicelo sokuxhawula
• I-ELD ithumela impendulo yokuxhawula
• I-SeeLeveL ithumela impendulo esicelweni sokuqala se-ELD uma impendulo yokuxhawula ilungile.

Ama-alamu awasekelwe okwamanje. Ngokuzayo, uma bethi:

• Okuqukethwe komlayezo 0x08 indawo yokusethwa kwe-alamu, i-alamu yezinga eliphezulu noma eliphansi, kanye nesimo se-alamu samanje. Umbuzo we-SeeLeveL Wokuxhawulana Kwesandla Phakathi Nomlayezo Wokusakaza (ELD -> SeeLeveL)
• Inani: 0x2D
• Lokhu kucela imvamisa yokuxhawula, impendulo ikhonjisiwe ngezansi.
• [0xFE][0xFE][0x24][0x09][0x2D][0x56][0xFF][0xFF][0x2A]

Imvamisa Yokuxhawula Ngesandla Phakathi Nempendulo Yokusakaza (SeeLeveL -> ELD)

• Inani: 0x2E, 1 byte payload
• Ifrikhwensi ingasukela ekusakazeni oku-1 kuye kwayi-126 ngesicelo ngasinye sokuxhawula. Inombolo iboniswa nge-hex ukusuka ku-0x02 ukuya ku-0x7F (inani eliphelele lokudluliselwa ngakunye ngokuxhawula, kuhlanganise nokuxhawula).
• Ifomethi yomlayezo, imvamisa ngu-20 (0x14):
• [0xFE][0xFE][0x24][0x0A][0x2E][0x14][0x6C][0xFF][0xFF][0x2A]

UMHLAHLANDLELA WOKUXOXA IZINKINGA

Ukunemba:
Okukhiphayo kwe-analogi kunokunemba okungu-± 0.25% yenani lesikali esigcwele, ngakho-ke noma yiliphi inani lokukhiphayo kufanele libe ngaphakathi kuka-0.05 mA yenani "elikahle". Akukho ukulungiswa komsebenzisi okungenziwa ukuze kushintshwe ukunemba. Njenganoma iyiphi isistimu yedijithali, kukhona amaphutha okuvala kanye nokuncishiswa atholakala kunqubo yezibalo. Kodwa-ke, njengoba i-SEELEVEL Access™ isebenzisa i-10 bit digital convertor to analog, inokunemba okwanele ukuvumela ukucaca okugcwele kwegeji yeloli ukuthi kubonakale. Qaphela ukuthi igeji yeloli ethumela idatha inokulungiswa kwamabhithi angu-8 kuphela (1/3” izinhlelo).

IMICIMBI

BONISA
Ukunemba kokukhiphayo kwe-analogi	0.25% yenani lesikali esigcwele ± 0.05 mA
Ubuncane bokuhlinzeka ngevolumutage	+10.0 V
Umehluko omncane phakathi kwevolthi yokufaka yokufakatage kanye voltage ekuphumeni kwe-analog 4-20 mA	4.0 V
Ukukhama kwamanje	150 mA noma ngaphansi
Ibanga lokushisa lomkhiqizo	-40°C kuya +60°C (-40°F kuya +140°F)
Indawo ebiyelwe	Material: Aluminium Usayizi: 68 mm ububanzi x 29 mm ukuphakama x 87 mm ukushona (2.7″ ububanzi x 1.1″ high x 3.4″ ukujula)
Uhlobo lokubonisa	I-LED enamadijithi angu-4, ingxenye engu-7 yamadijithi angu-10 mm (0.4″) aphezulu
Amandla okubonisa	Isebenza ngamaloli angu-12 V
Izintambo	Ukufakwa kukagesi ngezintambo ezingu-6: amandla angu-12 V (obomvu), aphansi (amnyama), isignali yegeji (ephuzi), okukhiphayo kwe-analog (okumhlophe/okuluhlaza okwesibhakabhaka), i-RS-232 serial receive (purple), kanye ne-RS-232 serial transmit (grey)
I-RS-232 ivolumu yokuphumayotagIzinga e	+/- 4.0 V ubuncane
Ifomethi ye-serial ye-RS-232	9600 XNUMX ngenhla Ifomethi ye-NRZ evamile yomaka/isikhala Imodi ingamabhithi angu-8 I-tx engaguquki Akukho uhlamvu lwekhefu Isiqalo esisodwa kancane kancane
UKUPHEPHA ULWAZI
Ukuhambisana kanye Izitifiketi	INGABE ICES-001(A)/NMB-001(A) Le divayisi ithobela ingxenye 15 yemithetho ye-FCC. Ukusebenza kungaphansi kwezimo ezimbili ezilandelayo: (1) Lolu cingo angeke lubangele ukuphazamiseka okuyingozi, futhi (2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki. Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobelana kungase kuchithe igunya lomsebenzisi lokusebenzisa okokusebenza. Lo mkhiqizo ungakuchaya kumakhemikhali ahlanganisa i-Nickel ne-Lead, aziwa eSifundazweni Sase-California ukuthi abangela umdlavuza, kanye nomthofu owaziwa yiSifundazwe SaseCalifornia ngokubangela ukukhubazeka kokuzalwa noma okunye ukulimala ekuzaleni. Ukuze uthole ulwazi olwengeziwe vakashela ku www.P65Izixwayiso.ca.gov   Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobelana kungase kuchithe igunya lomsebenzisi lokusebenzisa okokusebenza.

ULWAZI LWESEVISI NEWARANTI

Thola imininingwane yenqubo yesimangalo sewaranti bheka ekhasini lethu lokusekela kwelethu webindawo: www.garnetinstruments.com/support/

UMNQWANZO WESIQINISEKISO KU-Hardware

I-Garnet Instruments iqinisekisa ukuthi okokusebenza okukhiqizwe i-Garnet ukuthi kungabi nasici empahleni kanye nokusebenza ngaphansi kokusetshenziswa okujwayelekile kanye nesevisi isikhathi esiyiminyaka emithathu kusukela osukwini lokuthengisa ku-Garnet noma Kumdayisi Ogunyaziwe. Isikhathi sewaranti sizoqala kusukela ngosuku lokuthenga noma lokufakwa njengoba kukhonjisiwe ekhadini lewaranti. Ngaphansi kwalezi ziqinisekiso, i-Garnet izobophezeleka kuphela ekulahlekelweni kwangempela noma komonakalo odalekile bese kuphela ngokwezinga lentengo ye-invoyisi ye-Garnet yomkhiqizo. I-Garnet ngeke ibophezeleke kunoma yikuphi ukukhokhiswa kwabasebenzi ngomonakalo ongaqondile, okhethekile, noma owumphumela. I-Garnet ngeke ibe nesibopho sanoma yikuphi ukususwa kanye/noma ukufakwa kabusha kwemishini ye-Garnet enesici. Lezi ziqinisekiso ngeke zisebenze kunoma yikuphi ukukhubazeka noma omunye umonakalo kunoma iyiphi impahla ye-Garnet eshintshiwe nomaampifakwe nanoma ubani omunye ngaphandle kwabamele imboni ye-Garnet. Kuzo zonke izimo, i-Garnet izogunyaza kuphela imikhiqizo ye-Garnet esetshenziselwa izinhlelo ezamukelekayo ku-Garnet futhi ngaphakathi kwemininingwane yezobuchwepheshe yomkhiqizo othile. Ngaphezu kwalokho, i-Garnet izogunyaza kuphela leyo mikhiqizo efakiwe futhi yanakekelwa ngokuya ngemininingwane yefekthri ye-Garnet.

UMKHAWULO KUMAWARANTI

Lezi ziqinisekiso yizona kuphela iziqinisekiso, ezivezwayo noma ezishiwoyo, lapho imikhiqizo ethengiswa khona i-Garnet ne-Garnet ingenzi siqinisekiso sokuthengiseka noma ukufaneleka kwanoma iyiphi injongo mayelana nemikhiqizo edayisiwe. Imikhiqizo ye-garnet noma izingxenye zayo okucatshangwa ukuthi azisebenzi kahle umthengi phakathi nesikhathi esishiwo sewaranti kufanele ibuyiselwe kumthengisi, umsabalalisi wendawo, noma ngqo ku-Garnet ukuze ihlolwe futhi isetshenziswe. Noma nini lapho ukuhlolwa okuqondile kwasefekthri, isevisi noma ukushintshwa kudingekile, ikhasimende kufanele kuqala, ngencwadi noma ngocingo, lithole I-Returned Material Authorization (RMA) ku-Garnet Instruments ngokuqondile. Akukho lutho olungabuyiselwa ku-Garnet ngaphandle kwenombolo ye-RMA eyabelwe yona noma ngaphandle kokugunyazwa kwefekthri okufanele. Noma yiziphi izimbuyiselo kufanele zibuyiswe yimpahla ekhokhelwa kusengaphambili kwa: Garnet Instruments, 286 Kaska Road, Sherwood Park, Alberta, T8A 4G7. Izinto ezigunyaziwe ezibuyiswayo zizokhandwa noma zishintshwe ngokubona kwe-Garnet Instruments. Noma yiziphi izinto ze-Garnet ezingaphansi Kwenqubomgomo Yesiqinisekiso Se-Garnet ezibhekwa njengezingenakulungiseka yi-Garnet Instruments zizoshintshwa ngaphandle kwenkokhiso noma kuzokhishwa ikhredithi yaleyo nto kuncike esicelweni sekhasimende. Uma unesicelo sewaranti noma uma impahla idinga ukuseviswa, thintana nomdayisi wokufaka. Uma udinga ukuxhumana ne-Garnet, singafinyelelwa ngale ndlela elandelayo:

ECANADA 
Izinsimbi ze-Garnet
286 Kaska Road
I-Sherwood Park, AB T8A 4G7
ECANADA
i-imeyili: info@garnetinstruments.com 

I-UNITED STATES
Inkampani Garnet US Inc.
5360 Old Granbury Road
Granbury, TX 76049
USA
i-imeyili: infous@garnetinstruments.com

Amadokhumenti / Izinsiza

I-GARNET T-DP0301-A Iphothali Yedatha kanye Nesibonisi Esikude [pdf] Incwadi Yeziqondiso I-T-DP0301-A Data Portal kanye ne-Remote Display, T-DP0301-A, Iphothali Yedatha kanye Nokubonisa Okukude, Isibonisi Esikude

Izithenjwa

• Imaniwali yosebenzisayo