FOS ubuchwepheshe SuperStorm LED Strobe

Ulwazi Lomkhiqizo

Imininingwane

• Igama Lomkhiqizo: I-FOS SuperStorm
• Izinketho zokufaka: Ground, Ukulenga, Splicing, Diffuser
• Uxhumano Lwesiginali: I-DMX 512
• Inani eliphezulu lokulungisa: 32
• Ukunikezwa kwamandla kagesi: Uxhumano oluhlukene lwe-fixtureProduct ngayinye Imiyalo Yokusetshenziswa

Ukufakwa
Ukufaka i-FOS SuperStorm, landela enye yezindlela ezingezansi

1. Ukufakwa Kwaphansi: Beka isihluthulelo emhlabathini endaweni oyifunayo.
2. Ukulenga Ukulenga: Lengisa into usebenzisa izinto ezifanele kanye nezinyathelo zokuphepha.
3. Ukufakwa kwe-Splicing: Xhuma izinto eziningi ndawonye ukuze wakhe ukusethwa kokukhanya okude.
4. Ukufakwa kwe-Diffuser: Namathisela i-diffuser endaweni ukuze uthole imiphumela oyifunayo yokukhanyisa.

Isiginali kanye noxhumo lwamandla
Ukuze uxhume ukulungisa okuningi nokunikezwa kwamandla, landela lezi zinyathelo

1. Usebenzisa ikhebuli yesignali yamaphini angu-3, ​​xhuma imbobo yokukhipha ye-DMX yesilawuli emugqeni wokufaka we-DMX wesimo sokuqala.
2. Xhuma ulayini ophumayo we-DMX wesakhiwo sokuqala emugqeni wokufakwayo we-DMX wesakhiwo sesibili, futhi uqhubeke nalokhu kuxhumana kuze kuxhunywe zonke izinto.
3. Uma usebenzisa i-master-slave synchronous control, setha okokugcina njengokuyinhloko kumenyu bese okusele okulungisiwe njengezigqila (ukulungiselelwa okuzenzakalelayo kuyisigqila).
4. Qinisekisa ukuthi uhlelo ngalunye lunoxhumo oluhlukile lokuphakelwa kwamandla.
5. Qinisekisa ukuthi ivolumu yokunikezela kwamandlatagU-e kanye nemvamisa kuhambisana nezicaciso ezisohlwini lwemanyuwali yomkhiqizo.

Ukusebenza:
Ukuze usebenzise i-FOS SuperStorm, landela lezi zinyathelo

1. Ukuze uvule, faka iphasiwedi yokuvula amandla: PHEZULU – PHANSI – PHEZULU – PHANSI.
2. Cindezela inkinobho ethi PHEZULU noma PHANSI ukuze uphequlule izinketho ezihlukahlukene zokusetha.
3. Cindezela inkinobho ethi ENTER ukuze ulondoloze izilungiselelo noma ufake imenyu elandelayo.
4. Cindezela inkinobho ethi PHEZULU noma PHANSI ukushintsha izinketho.
5. Cindezela inkinobho MENU ukuze ubuyele kumenyu ephezulu.

Ukulungiselelwa Kwekheli le-DMX:
Uma usebenzisa isilawuli ukulawula ukulungiswa okuningi, ukulungiswa ngakunye kufanele kuhlinzekwe ngekheli le-DMX eliyingqayizivele. Kukhona izindlela zokulawula ezi-3 ezitholakalayo:

• Imodi elula
• Imodi Ejwayelekile
• Imodi yobukhulu

I-FAQ:

1. Q: Yini okufanele ngiyenze uma kukhona umonakalo odalwe yizinto zokuhamba?
   A: Ngemva kokuthola izibani, vula futhi uhlole umonakalo. Uma kukhona umonakalo odalwe yizinto zokuhamba, ungalusebenzisi ucingo bese uthintana nomdayisi noma umkhiqizi wakho ngokushesha.
2. Q: Ngingakwazi ukusebenzisa i-clamps njengesibambo sokuthwala izinto?
   A: Cha, kwenqatshelwe ngokuphelele ukusebenzisa i-clamps njengesibambo sokuthwala izinto. Sebenzisa izibambo ezifanele noma izindlela zokuphatha.
3. Umbuzo: Ingabe ukufaka okulenga eceleni kuvunyelwe?
   IMP: Cha, ukufakwa okulenga eceleni akuvumelekile ngenxa yezizathu zokuphepha.
4. Q: Ingakanani inombolo ephezulu yezinhlelo ezingaxhunywa?
   A: Inombolo enkulu yezinhlelo ezingaxhunywa zingama-32.
5. Q: Ngilibeka kanjani ikheli le-DMX kumdlalo ngamunye?
   A: Sebenzisa isilawuli ukuze unikeze ikheli le-DMX eliyingqayizivele kuhlu ngalunye ukuze uthole ukwamukela isignali efanele nokuphendula.

Ulwazi oluyisixwayiso sokuphepha

Ngemva kokuthola izibani, sicela uvule ukuze uhlole ukuthi ingabe akukho yini umonakalo odalwe izinto zokuhamba. Esimeni somonakalo odalwe yizinto zokuhamba, sicela ungayisebenzisi le divayisi futhi uxhumane nomdayisi noma umkhiqizi wakho ngokushesha ngangokunokwenzeka.

• Iprojektha ngeyokusetshenziswa ngaphakathi nangaphandle, IP65.
• Ungazifaki izinto ezisetshenziswayo endaweni evutha umlilo ngokuqondile.
• Lolu hlelo luhloselwe kuphela ukufakwa, ukusebenza nokunakekelwa ngabasebenzi abaqeqeshiwe. Ungafaki i-beam ezindaweni ezivuthayo, ibanga elincane lingamamitha angu-3.
• Gwema ukuchayeka ekukhanyeni okusuka ku-lamp. Ukukhanya kuyingozi emehlweni.
• Ungazami ukudiliza kanye/noma ukuguqula iprojektha nganoma iyiphi indlela.
• Ukuxhunywa kukagesi kufanele kwenziwe kuphela ngabasebenzi abaqeqeshiwe.
• Ngaphambi kokufaka, qiniseka ukuthi i-voltagI-e kanye nemvamisa yokunikezwa kwamandla kufana nezidingo zamandla zesakhiwo.
• Kubalulekile ukuthi iprojektha ngayinye ifakwe umhlabathi ngendlela efanele nokuthi ukufakwa kukagesi kuhambisane nazo zonke izindinganiso ezifanele.
• Ungaxhumi le divayisi kunoma yiziphi ezinye izinhlobo ze-dimmer apparatus.
• Iprojektha kufanele ihlale ifakwe ngokulungiswa kwesibili kokuphepha. Intambo yokuphepha ihlinzekwa ngalokhu; kufanele inamathiselwe njengoba kukhonjisiwe esigabeni "sokufaka iprojektha".
• Izihlangu namalensi azoshintshwa uma zonakaliswe ngokusobala ngendlela elingana neyazo
  ukusebenza konakele, isiboneloample ngemifantu noma imihuzuko ejulile.
• Amazinga okushisa angaphandle kwe-luminaire ngemva kwemizuzu emi-5 yokusebenza angu-45℃, lapho isimo sokuqina sifinyelelwa ku-70℃. Azikho izingxenye ezisebenzisekayo zomsebenzisi ngaphakathi kweprojektha, musa ukuyivula indlu futhi ungalokothi usebenzise into efakwe amakhava asusiwe.
• Azikho izingxenye ezisebenzisekayo zomsebenzisi ngaphakathi kwalokhu kukhanya, sicela uhlole ukuthi wonke amakhava noma amagobolondo afakiwe yini futhi izikulufu ziqiniswe ngokuvikelekile. Akuvunyelwe ukusebenzisa izibani ezinekhava (noma igobolondo) elivuliwe.
  Uma unemibuzo, ungangabazi ukuxhumana nomthengisi noma umkhiqizi wakho.

Njalo nqanyulwa ku-Power ngaphambi kokufaka, ukuhlanzwa nokugcinwa kwedivayisi

Ukufakwa

1. Kufakwe phansi
2. Iyalenga
3. Ukuhlanganisa
4. I-Diffuser

Khipha 2 clamps kanye nentambo yokuphepha e-1, faka i-2 clamps phansi kwesakhiwo neknobhu esheshayo engu-4 enamathiselwe ku-clamps , bese ulenga isigxivizo kusekelo olungaguquki nge-clamp, futhi uqinise i-clamp vala ibhawudi ukuze ulungise isihluthulelo. Sicela uqinisekise ukuthi ukufakwa kwesakhiwo kuzinzile futhi kuthembekile, futhi uqinisekise ukuthi indawo yokuphakamisa inamandla anele ukumelana nesisindo sendawo. sicela uphathe intambo yokuphepha efakwe ngezikhathi ezithile udlule kuyo phansi kwesibambi ukuze uyiphakamise ukuze uqinisekise ukuphepha.
Xwayisa:

1. I-clamps asetshenziswa kuphela lapho kufakwa izinto ezilungiswayo. Kwenqatshelwe ngokuphelele ukusebenzisa i-clamps njengesibambo sokuthwala izinto.
2. Ngenxa yezizathu zokuphepha, sicela usebenzise intambo yokuphepha engamelana nesisindo esiphindwe ka-10 sensimbi ngembobo yokuphepha yesakhiwo.
3. I-side hang izinsimbi azivunyelwe.

Isiginali namandla ukuxhuma

• Ukuze kuxhunywe amasiginali okulawula, izintambo ezivikelwe ezinamaphini angu-2 ezinobubanzi obungekho ngaphansi kuka-0.5 mm kufanele zisetshenziswe phakathi kwesakhiwo nesilawuli naphakathi kwezinto ezilungiswayo.
• Sicela usebenzise okukhiphayo kwesignali yamaphini angu-3 /umugqa ongenayo we-lamp ukuxhuma. Ukuxhumana phakathi kwezimbobo zolayini wesignali yamaphini-3 kuboniswa esithombeni esingenhla. Kumele kuqashelwe ukuthi iphinikhodi engu-3 yepulaki / isokhethi ye-XLR akumele ixhumane negobolondo elingaphakathi noma phakathi kwama-cores lapho ixhuma. Ipulaki / isokhethi ye-XLR kanye nekhebula lokulawula le-XLR azikwazi ukuxhunywa nganoma iyiphi enye indlela ngaphandle kokuxhumana okuboniswe esithombeni esingenhla. Lo mkhiqizo uthola isignali yokulawula ejwayelekile ye-DMX512 (1990).
• Uxhumo lwesignali yezinhlelo eziningi, inani eliphezulu lokuxhuma liyizinto ezingama-32, sebenzisa ikhebula lesignali enamaphini angu-3 ukusuka embobeni yokuphuma ye-DMX yesilawuli ukuya kulayini wokufaka we-DMX we-fixture yokuqala, futhi uxhume umugqa ophumayo we-DMX we- okokuqala Kulayini wokufaka we-DMX wesakhiwo sesibili, njalo njalo, kuze kube yilapho zonke izinto zixhunyiwe.
• Uma i-fixture yokuqala ingaxhumekile kusilawuli (uxhumano lwesignali phakathi kwezinye izinto luhlala lungashintshiwe), imodi yokuxhuma yokulawula okuvumelanayo kwe-master-slave . Kodwa-ke, ukuze kuzuzwe ukulawula kokuvumelanisa kwesigqila esiyinhloko, isigqi sokuqala kufanele simiswe njengokuyinhloko kumenyu, futhi okusele kufanele kumiswe njengezigqila (inani elizenzakalelayo liyisigqila).
• Lapho uxhuma ukunikezwa kwamandla, ukunikezwa kwamandla kwesakhiwo ngasinye kufanele kuxhunywe ngokuhlukana. Sicela wazi ukuthi amandla kagesi voltagU-e kanye nefrikhwensi kufanele kuhambisane nevolthi yokunikezwa kwamandlatage kanye nemvamisa esohlwini lwemanyuwali yomkhiqizo.

Umsebenzi nokufakwa

• Cindezela inkinobho   uma ufuna ukuphequlula Izinketho Zokusetha ezihlukahlukene.
• Cindezela inkinobho ukuze ulondoloze izilungiselelo zakho noma ufake imenyu elandelayo.
• Cindezela inkinobho ukushintsha.
• Cindezela inkinobho izobuyela kumenyu ephezulu ngayinye ngayinye.

Ukulungiselelwa kwekheli le-DMX

• Uma usebenzisa isilawuli ukuze ulawule izinto eziningi ezilungiswayo ngakunye kuzohlinzekwa ngekheli le-DMX ukuze uthole amasiginali avela kusilawuli futhi uphendule ngendlela efanele, Kukhona amamodi okulawula angu-3 kulo mkhiqizo, okuyimodi elula, imodi evamile kanye nemodi yobukhulu.
• Ngoba example: Isakhiwo sineziteshi ezingu-20 ngemodi evamile.

Setha umdlalo wokuqala :Ikheli le-DMX elingu-001, bese kuba yikheli le-DMX lesibili elingu-2, ikheli le-021 le-DMX elingu-3, i-041th fixture 4 njalo njalo.

• Vula into, Uma imenyu yokusebenza ikhiyiwe, cindezela  ku-5 Sec, i-fixture izovulwa;
• Bese ucindezela     or  thola Engeza imenyu;
• Cindezela    bonisa Ikheli le-DMX;
• Cindezela  setha inani lekheli le-DMX
• Cindezela  ukuze uqinisekise ukuthi uhlelo lugcine ngokuzenzakalelayo leli kheli le-DMX
• Cindezela u-Menu uzobuyela kumenyu ephezulu

Imenyu yokusebenza

iphasiwedi yokuvula amandla ,

1st LEVEL	Okwesibili LEVEL	1rd LEVEL	1 kwe LEVEL
Ikheli le-DMX	XXX  1~499)	ngena
Imodeli yesiteshi se-DMX	13 CH (DMX)	ngena
	64 CH (DMX)	ngena
	I-89CH (DMX)	ngena
Isifanekiso esingaxhunyiwe ku-inthanethi	Bamba	ngena
	Imanuwali	ngena
	Okuzenzakalelayo	ngena
	VALIWE	ngena
	On	ngena
Umbala Wezandla	I-Dimmer	0-255
	I-Strobe	0-255
	Imakhro 1	0-255
	IMacro S1	0-255
	Imakhro 2	0-255
	IMacro S2	0-255
	Umbala Omkhulu	0-255
	I-Char1	0-255
	Isahluko 2	0-255
	Isahluko 3	0-255
	Isahluko 4	0-255
	Isahluko 5	0-255
	Umbala we-Char	0-255
	I-BackColor Red	0-255
	I-BackColor Green	0-255
	BackColor Blue	0-255
	Okumhlophe 1	0-255
	Okumhlophe 2	0-255

	Okumhlophe 3	0-255
	Okumhlophe 4	0-255
	Okumhlophe 5	0-255
	Okumhlophe 6	0-255
	Okumhlophe 7	0-255
	Okumhlophe 8	0-255
I-Auto Prgram	Bonisa i-RGB	0-255
	Isivinini se-RGB	0-255
	Bonisa W	0-255
	Isivinini W	0-255
	Umbala we-Char	0-255
	I-Char1	0-255
	Isahluko 2	0-255
	Isahluko 3	0-255
	Isahluko 4	0-255
	Isahluko 5	0-255
Bonisa	Ch / En	中文
		IsiNgisi
	Bonisa Ngokuqondile	Okuvamile
		hlehla
	Ukukhanya kwangemuva	ON
		30s
Ipharamitha	CHA
	yebo
Okuzenzakalelayo	Cha
	Yebo
Ulwazi	I-RDM UID
	Isiteshi
	Ver
	Isikhathi
	Izinga lokushisa

Uhlu lweziteshi ze-DMX

Isiteshi

Isiteshi	Igama	Inani eliphakeme kakhulu lama-DMX	Iphesenti le-DMXtage	Incazelo
1	I-Dimmer	0-255	0-100%	0-100%Ukuqina
2	I-Strobe	0-255	0-100%	0-100% Strobr imvamisa
3	Imakhro 1	0-10	0-100%	okungavumelekile
		11-20	0-100%	Fx1
		…..
		245-255		Fx25
4	IMacro 1S	0-255
5	Imakhro 2	0-10	0-100%	okungavumelekile
		11-20	0-100%	Fx1
		…..
		245-255		Fx25
6	IMacro 2S	0-255	0-100%
7	Macro 2CF	0-255	0-100%
8	I-Macro 2CB	0-255	0-100%
9	I-W-S	0-255	0-100%
10	I-Red-C	0-255	0-100%	0-100% obomvu
11	Green-C	0-255	0-100%	0-100% Okuhlaza
12	Okuluhlaza okwesibhakabhaka-c	0-255	0-100%	0-100% Okuluhlaza okwesibhakabhaka
13	I-WC	0-255	0-100%	0-100% Okumhlophe

64 Isiteshi

Isiteshi	Igama	Inani eliphakeme kakhulu lama-DMX	Iphesenti le-DMXtage	Incazelo
1	I-pixel module 1 R	0-255	0-100%	0-100% obomvu
2	I-pixel module 1G	0-255	0-100%	0-100% Okuhlaza
3	I-pixel module 1 B	0-255	0-100%	0-100% Okuluhlaza okwesibhakabhaka
3	I-pixel module 1 W	0-255	0-100%	0-100% W
….	……	0-255	0-100%	…….
61	I-pixel module 16 R	0-255	0-100%	0-100% obomvu
62	I-pixel module 16G	0-255	0-100%	0-100% Okuhlaza

63	I-pixel module 16 B	0-255	0-100%	0-100% Okuluhlaza okwesibhakabhaka
64	I-pixel module 16 W	0-255	0-100%	0-100% W

89 Isiteshi

Isiteshi	Igama	Inani eliphakeme kakhulu lama-DMX	Iphesenti le-DMXtage	Incazelo
1	U-Dimmer-W	0-255	0-100%	0-100%Ukuqina
2	I-Dimmer-RGBW	0-255	0-100%	0-100% Strobr imvamisa
3	I-Strobe	0-255
4	Imakhro 1	0-10	0-100%	okungavumelekile
		11-20	0-100%	Fx1
		…..
		245-255		Fx25
5	IMacro 1S	0-255
6	Imakhro 2	0-10	0-100%	okungavumelekile
		11-20	0-100%	Fx1
		…..
		245-255		Fx25
7	IMacro 2S	0-255	0-100%
8	Macro 2CF	0-255	0-100%
9	I-Macro 2CB	0-255	0-100%	0-100% W
10	Okumhlophe 1
…	…..	0-255	0-100%
25	Okumhlophe 16	0-255	0-100%	0-100% W
26	I-pixel module 1 R	0-255	0-100%	0-100% obomvu
28	I-pixel module 1G	0-255	0-100%	0-100% Okuhlaza
29	I-pixel module 1 B	0-255	0-100%	0-100% Okuluhlaza okwesibhakabhaka
30	I-pixel module 1 W	0-255	0-100%	0-100% W
….	……	0-255	0-100%	…….
86	I-pixel module 16 R	0-255	0-100%	0-100% obomvu
87	I-pixel module 16G	0-255	0-100%	0-100% Okuhlaza
88	I-pixel module 16 B	0-255	0-100%	0-100% Okuluhlaza okwesibhakabhaka
89	I-pixel module 16 W	0-255	0-100%	0-100% W

Okubalulekile kwesiteshi: ukufiphala> ucingo lohlelo olwakhelwe ngaphakathi > ucingo lohlelo lomsebenzisi> ukufiphala kwe-ARGBW > ukufiphala kwe-HSV> Umyalelo weMacro> Izinga lokushisa Lombala

Isondlo

• Ukuqinisekisa ukwethembeka kweprojektha kufanele igcinwe ihlanzekile. Kunconywa ukuthi abalandeli kufanele bahlanzwe njalo ezinsukwini eziyi-15. Ilensi kanye nezihlungi zombala we-dichroic kufanele futhi  zihlanzwe njalo ukuze kugcinwe ukukhanya okuhle okukhiphayo. UNGASEBENZISI noma yiluphi uhlobo lwesincibilikisi kuzihlungi zemibala ye-dichroic.
• Ukuvama kokuhlanza kuncike endaweni lapho okukhona kusebenza khona: damp, intuthu noma indawo engcolile ikakhulukazi ingabangela ukunqwabelana okukhulu kokungcola kuma-optics eyunithi. Indwangu ethambile kanye nemikhiqizo ejwayelekile yokuhlanza ingilazi kufanele isetshenziswe ekuhlanzeni. Kunconywa ukuhlanza okokusebenza kwangaphandle okungenani kanye njalo ezinsukwini ezingu-20 futhi uhlanze ama-optics angaphakathi okungenani kanye njalo ezinsukwini ezingu-30/60.
• Ungasebenzisi noma iyiphi i-solvent ephilayo, isb. utshwala, ukuhlanza isibuko esikhanyayo, izihlungi zombala we-dichroic noma izindlu ze-apparatus.

Ukudubula inkinga

Izinkinga	Isenzo
I-fixture ayivuleki kahle	ukuxhumeka kwentambo yamandla akuyona into evamile  ugesi oshintshwayo wonakele noma uxhumo aluvamile, kudingeka uchwepheshe oqeqeshiwe ukuze alungise futhi alungise Ukuxhumana kwebhodi lokulawula akuyona into evamile, uchwepheshe oqeqeshiwe odingekayo uyadingeka ukuze anakekele futhi alungise
I-Fixture switch ivuliwe , kodwa i-LED ayikhanyi futhi ayilawulwa	Ukuxhumeka kwebhodi le-LED akuyona into evamile, uchwepheshe oqeqeshiwe odingekayo uyadingeka ukuze afeze ukulungiswa nokulungisa
Vula futhi ukhanyise ngokuvamile, kodwa awulawulwa yisilawuli	hlola ukuthi isethingi yekhodi yekheli yokuqala ye-DMX ilungile noma cha Hlola ukuthi ulayini wesignali we-XLR wonakele noma cha
Isakhiwo sifiphele futhi nokukhanya kwehla kakhulu	Izinga lokushisa lezinto zokudlala liphezulu kakhulu, sicela uthathe izinyathelo ezidingekayo zokukhipha umoya kanye nokuqeda ukushisa

Idatha yobuchwepheshe

• Okokufaka ivoltage:
  • AC 100V/120V/200V/220V /230V/240V 50/60Hz
• Amandla :
  • 700W@220V
• Umthombo wokukhanya we-LED:
• I-Strobe Tube LEDS
  • Uhlobo lwe-LED: 3535 5W 6500K ama-LED
    Isibalo se-LED: 144
    I-LED Imibala: Okumhlophe Okupholile
    Izingxenye ze-LED: 16
• I-Strobe Panel LEDs
• Uhlobo lwe-LED: 5050SMD 2W RGBW 4 ku-1 Isibalo se-LED: 242
  Imibala ye-LED: Okumhlophe Okupholile
  Izingxenye ze-LED: 32 (2×16)
• Ukusebenza isikhathi sokuphila
  • 50000h
• I-Dimmer :
  • 0-100% ukufiphala komugqa
• I-Strobe :
  • I-strobe kagesi, 0.3-20pcs/isekhondi I-Max 20 Hz
• Imodi yokulawula:
  • I-DMX 512signal ejwayelekile yamazwe ngamazwe, Iphinikhodi engu-3 (Iphinikhodi engu-5) i-DMX512 isixhumi esibonakalayo se-RDM Okungenantambo:2.4 GHz W-DMX™ (uma uthanda)
  • 3 amamodi eziteshi
  • Isigqila esiyinhloko
  • Imodi yokuma wedwa
  • Imodi yokuzihlola
• Eminye imisebenzi:
  • Isivinini esilungisekayo esivundlile nesiqondile
  • Ukubonisana kusetshenziswa isikhathi
  • Bonisa inombolo yenguqulo yesofthiwe
  • Isakhiwo se-modular ukuze sigcinwe kalula
  • Irediyetha elawula isivinini
• Isixhumi
  • Amandla : Intshumayelo ye-PowerOn Ture1 DMX: Isixhumi sekhebula se-Sermonic XLR
• Igobolondo nezinga lokuvikela:
  • High-strength casting aluminium alloy, IP66 igobolondo elimnyama (omhlophe ozikhethela)
• Izinga lokushisa lokusebenza:
  • -20°C kuya ku-40°C
• Isisindo:
  • 8.9 Kg
• Usayizi wokukhiqiza:
  • Bona ngezansi

Amadokhumenti / Izinsiza

FOS ubuchwepheshe SuperStorm LED Strobe [pdf] Imaniwali yosebenzisayo I-SuperStorm LED Strobe, i-LED Strobe, i-Strobe

Izithenjwa

• Imaniwali yosebenzisayo