I-FIRECORE FLP370C I-Laser Level Pole ene-Tripod

Imininingwane

• ImodeliI-FIRECORE FLP370C
• Uhlobo: I-Laser Level Pole ene-Tripod
• Ubukhulu Ubude: 3.7 m
• Okubalulekile: Ingxube ye-Aluminium
• Isisindoisisindo: 2.5 kg
• Ukunemba±1.5mm/m

Izici

Imiyalo yokusetshenziswa komkhiqizo

Ukusetha i-Laser Level Pole:
Ukuze usethe i-FIRECORE FLP370C Laser Level Pole, landela lezi zinyathelo

1. Vula imilenze ye-tripod futhi uqinisekise ukuthi ikhiywe ngokuphephile endaweni.
2. Namathisela ileveli ye-laser phezulu kwesigxobo.
3. Nweba isigxobo sifinyelele ukuphakama okufunayo, kuze kufike kumamitha angu-3.7.

Ukulungisa Izinga Laser
Ukulungisa ileveli ye-laser ngokunemba

1. Sebenzisa izitsha zebhamuza ezakhelwe ngaphakathi ukuqinisekisa ukuthi isigxobo sime mpo.
2. Vula ileveli ye-laser futhi uyilungise kuze kube yilapho i-laser beam iqondaniswa nephoyinti lakho lesithenjwa.

Isebenzisa Izinga Laser
Uma izinga le-laser selimisiwe futhi lilungiswa, ungakwazi:

1. Sebenzisa i-laser beam ukumaka amazinga anembile ezindongeni noma ezindaweni.
2. Zungezisa ileveli yelaser ngemigqa evundlile noma eqondile njengoba kudingeka.

Imininingwane

• Izigaba zenduku: Induku ye-telescopic emine + Induku eyodwa yomsila Impahla: I-Aluminium ene-polyurethane enamathela Iziqu: cm / intshi
• Ubukhulu benduku: 10 mm
• Isixhumanisi phakathi kwemigqa: 5/8″
• Ubude obulinganiselwe lapho buhlanganiswe ngokugcwele: 3.7m / 12.14ft Ubude besigaba senduku: 60cm/23.62″
• Induku yomsila yobubanzi obungeziwe bokulungisa: 0-53cm / 0-20.87″ Ubude be-Tripod: 48-84cm / 18.90-33.07″
• Intambo yokufaka ubakaki: 1/4″-20 & 5/8″-11
• Ubude bebanga lokushuna kahle ububanzi: 7cm / 2.75″
• Isisindo: 3.5kg / 7.7lb
• Ubukhulu bomthwalo: 5kg / 11lb
• Ubude besitoreji: 80cm / 31.5″

Izinyathelo Zokufaka

1. Zungezisa Izigaba Zenduku ukuze zihlangane ngokugcwele nazo zonke izigaba ezine ②③④⑤.
2. Faka Ubakaki Oguquguquka Ubude ⑨ezingxenyeni ezihlanganisiwe, bese ufake I-Top Ceiling Skid Plate ⑦ phezulu kwezingxenye zenduku.
3. Lungisa i-Adjustable Stable Tripod ⑥ bese uyibeka endaweni ekhethiwe, amabhande emilenzeni emithathu angavulwa ukuze kunwetshwe ubude bemilenze. Qaphela: Amabhande adinga ukukhiywa ukuze azinze.
4. Lungisa i-Tail Rod ① endaweni ye-tripod bese uqinisa i-clamp isikulufa kukhola engaphezulu.
5. Hlanganisa Induku Yomsila ① Ngezigaba Zenduku ehlanganiswe esinyathelweni sesi-2.
6. Zungezisa izigaba ze-twist-lock telescopic bese ucindezela i-pedal ku-Tail Rod ① ukuze ulungise ubude obudingekayo.
7. Lungisa indawo yabakaki esigxotsheni ngokusebenzisa ilokhi yesigxobo. Faka iyunithi ye-laser endaweni yesikhulumi ngentambo yesilisa engu-1/4″-20 noma i-adaptha yochungechunge engu-5/8″-11 efakiwe.
8. Zungezisa amafindo okuhlela kubakaki ukuze ulungise ubude beplathifomu ngokwezidingo zakho.

Isondlo Nokunakekela

1. Ungaqinisi kakhulu imicu ezingxenyeni zenduku, vele uzixhume ndawonye. Ungafaki ukucindezela okukhulu endongeni.
2. Ukusebenzisa ngokufanele uwoyela wokugcoba ku-adaptha kungasiza ukunciphisa ukuguga nokunciphisa ukuhlukana phakathi ngesikhathi sokuqaqa.
3. Uma unamathisela ithuluzi kubakaki bezigxobo, qiniseka ukuthi insimbi igxile ngokuvikelekile kubakaki kanye ne-pole cl.amps kufanele iboshwe ngokuvikelekile. Uma ingaboshiwe ngokuvikelekile noma iqiniswe, ithuluzi lingawa.
4. Buyisela into esikhwameni futhi uyibeke endaweni eyomile uma isikhathi eside ingasetshenzisiwe.

FAQ

Q: Kuyini ukunemba kwe-FIRECORE FLP370C Laser Level Pole?
A: Ukunemba kwesigxobo sezinga le-laser ngu-±1.5mm/m, okuhlinzeka ngokulingana okunembayo kwamaphrojekthi akho.

Q: Ingabe i-tripod ifakiwe ne-FIRECORE FLP370C Laser Level Pole?
A: Yebo, i-tripod ifakiwe njengengxenye yephakheji ukuze kusethwe kalula nokuzinza ngesikhathi sokusebenza.

Amadokhumenti / Izinsiza

I-FIRECORE FLP370C I-Laser Level Pole ene-Tripod [pdf] Umhlahlandlela Womsebenzisi I-FLP370C I-Laser Level Pole ene-Tripod, i-FLP370C, i-Laser Level Pole ene-Tripod, i-Level Pole ene-Tripod

Izithenjwa

• Imaniwali yosebenzisayo