I-FALLTECH FT-X EdgeCore Arc Flash Class 2 Leading Edge SRL-P

Le manuwali ihloselwe ukuhlangabezana neMiyalo Yomkhiqizi njengoba kudingwa yi-American National Standards Institute (ANSI) Z359 futhi kufanele isetshenziswe njengengxenye yohlelo lokuqeqesha abasebenzi njengoba kudingwa i-Occupational Safety and Health Administration (OSHA). Ngezinjongo zale manuwali, i-FT-XTM EdgeCoreTM Arc Flash Class 2 Leading Edge SRL-P kukho konke ukuphindaphinda ingase kubhekiselwe kuyo ngokuhlangene njenge-FT-X, i-FT-X Arc Flash, i-SRL-P, unqenqema oluhamba phambili lwe-SRL. , i-SRL, i-Arc Flash SRL, okokusebenza, idivayisi, umkhiqizo, noma iyunithi. Kulo lonke leli bhukwana, kusetshenziswa amagama, imishwana namagama okuvikela ukuwa kwe-ANSI Z359.0-2012. Le migomo yonke ichazwe ngokusemthethweni eSigabeni 9 sale manuwali. Noma yiziphi izinguqulo okungezona ezesiNgisi zale manuwali yeziqondiso zomsebenzisi ezereferensi kuphela.

Izexwayiso Nolwazi Olubalulekile

ISEXWAYISO

• Gwema ukuhambisa imishini, ezishisayo, zikagesi, kanye/noma izingozi zamakhemikhali njengoba ukuthintana kungase kubangele ukulimala okubi kakhulu noma ukufa.
• Gwema ukuwa kwama-swing.
• Landela imikhawulo yesisindo kanye nezincomo kule ncwadi.
• Susa emsebenzini noma yiziphi izinto ezingaphansi kwamandla okuboshwa.
• Susa kusevisi noma yiziphi izinto ezisetshenziswayo ezihlulekayo ukuhlolwa.
• Ungashintshi noma usebenzise kabi lesi sisetshenziswa ngamabomu.
• Bheka i-FallTech lapho usebenzisa lesi sisetshenziswa ngokuhlangene nezingxenye noma amasistimu angaphansi kwalawo achazwe kule manuwali.
• Ungaxhumi ama-rebar hook, ama-carabiner amakhulu, noma ama-snap hook amakhulu ku-FBH dorsal D-rings njengoba lokhu kungase kubangele isimo sokukhishwa kanye/noma ukunqanyulwa okungahlosiwe.
• Qaphela lapho wenza i-arc welding. I-arc flash evela emisebenzini yokushisela i-arc, okuhlanganisa ama-arcs engozi avela kuzinto zikagesi, ingalimaza okokusebenza futhi ingase ibulale.
• Hlola indawo yokusebenza. Qaphela indawo ezungezile nobungozi bendawo yokusebenza obungase buthinte ukuphepha, ukuphepha, kanye nokusebenza kwezinhlelo zokubopha kanye nezingxenye zokuwa.
• Izingozi zingabandakanya, kodwa azikhawulelwe, ikhebula noma imfucumfucu izingozi, ukwehluleka kwezisetshenziswa, amaphutha ezisebenzi, noma izinto ezihambayo ezifana nezinqola, amabhala, izinto zokuphakamisa imfoloko, okhreni, noma onodoli. Ungavumeli okokusebenza, amathuluzi, noma okokusebenza kwezokuthutha ukuthintana nanoma iyiphi ingxenye yesistimu yokubamba ukuwa.
• Ungasebenzi ngaphansi kwemithwalo emisiwe.

KUBALULEKILE

Lo mkhiqizo uyingxenye yokuboshwa komuntu siqu kokuwa, ukubanjwa, ukuma emsebenzini, ukumiswa, noma uhlelo lokuhlenga. I-Personal Fall Arrest System (PFAS) ngokuvamile yakhiwa i-anchorage kanye ne-Full Body Harness (FBH), enomshini oxhumayo, okungukuthi, i-Shock Absorbing Lanyard (SAL), noma i-Self-Retracting Lanyard (SRL), exhunywe ku-Personal Fall Arrest System (PFAS) i-D-ring ye-FBH.

Le miyalo kufanele inikezwe umsebenzi osebenzisa le mishini. Umsebenzi kufanele afunde futhi aqonde imiyalelo yomkhiqizi wengxenye ngayinye noma ingxenye yesistimu ephelele. Iziyalezo zomkhiqizi kufanele zilandelwe ngokusetshenziswa okufanele, ukunakekelwa, kanye nokugcinwa kwalo mkhiqizo. Le miyalo kufanele igcinwe futhi igcinwe itholakala ukuze isisebenzi sibhekiswe kuso ngaso sonke isikhathi. Ukushintsha noma ukusetshenziswa kabi kwalo mkhiqizo, noma ukwehluleka ukulandela imiyalelo, kungase kubangele ukulimala okubi kakhulu noma ukufa. I-Fall Protection Plan kufanele ivuliwe file futhi etholakalayo kabushaview ngabasebenzi bonke. Kungumsebenzi wesisebenzi nomthengi walesi sixhobo ukuqinisekisa ukuthi abasebenzisi balo mshini baqeqeshwe ngendlela efanele ekusebenziseni kwawo, ekuwunakekeleni nasekuwugcineni. Ukuqeqeshwa kufanele kuphindwe ngezikhathi ezithile. Ukuqeqeshwa akumele kufake oqeqeshwayo ezingozini zokuwa. Xhumana nodokotela uma kunesizathu sokungabaza ukufaneleka kwakho ukuze ubambe ngokuphephile ukushaqeka kwesenzakalo sokuwa. Iminyaka yobudala nokuqina kuthinta kakhulu ikhono lesisebenzi lokumelana nokuwa. Abesifazane abakhulelwe noma abancane akufanele basebenzise lezi zisetshenziswa.

I-ANSI ikhawulela isisindo sabasebenzisi bemishini yokuvikela ukuwa sifike ku-310 lbs. Imikhiqizo ekule manuwali ingase ibe nomthamo olinganiselwe owedlula umkhawulo wamandla we-ANSI. Abasebenzisi abanzima bahlangabezana nengozi eyengeziwe yokulimala okubi kakhulu noma ukufa ngenxa yokuwa ngenxa yokukhuphuka kwamandla okuboshwa okuwa abekwe emzimbeni womsebenzisi. Ukwengeza, ukuqala kokuhlukumezeka kokumiswa ngemva komcimbi wokuwa kungase kusheshiswe kubasebenzisi abakhulu. Umsebenzisi wezinto ezisetshenziswayo okuxoxwe ngazo kuleli bhukwana kumele afunde futhi aqonde yonke incwadi ngaphambi kokuqala umsebenzi.
QAPHELA: Ukuze uthole ulwazi olwengeziwe thintana nendikimba yamazinga ye-ANSI Z359.

Incazelo

I-FT-XTM EdgeCoreTM Arc Flash Class 2 Leading Edge SRL-P iyithuluzi elizihoxisa ngokwalo kulabo abasebenza ngobude futhi lingase libe ngaphansi kwezingozi zokuwa, okuhlanganisa izingozi ezihamba phambili. Le manuwali ihlanganisa Isithasiselo esisodwa esiqukethe izibalo namathebula aqondene ne-FT-XTM EdgeCoreTM Arc Flash SRL-P okuxoxwe ngayo kule manuwali.
I-FallTech Arc Flash SRLs ihlolelwe ukuhlangabezana nezidingo ze-ASTM F887 ne-OSHA 1910.269 ezidinga umthamo wokugcina ukumelana nelangabi phakathi kwe-arc kagesi enamandla okushisa afika ku-40±5 cal/cm2. Sicela ubheke ithebula eliseSithasiselweni A salesi sithasiselo ukuze uthole izinombolo zezingxenye ezithile kanye nokucaciswa kwazo. I-SRL okuxoxwe ngayo kule manuwali ingase inanyathiselwe i-anchorage engaphezulu, okungukuthi, ukusuka ngqo phezu kwekhanda lomsebenzisi, noma endaweni yokunamathisela odongeni okungenani engu-5' ngaphansi kwe-FBH dorsal D-ring yomsebenzisi.

Unqenqema oluphambili lusho uhlangothi olungavikelekile kanye nonqenqema lwesitezi, uphahla, noma uhlobo lomsebenzi wesitezi noma enye indawo yokuhamba/yokusebenza (efana nedekhi) eshintsha indawo njengoba iphansi eyengeziwe, uphahla, umpheme, noma izigaba zomsebenzi zenziwa, zakhiwe. , noma kwakhiwa; bheka Umfanekiso 1. Njengoba kukhonjisiwe kuMfanekiso 2 ngezansi, i-FT-X EdgeCore Arc Flash inendlu enayiloni equkethe isilonda sokwenziwa sokuphila esigubheni esiqinile sasentwasahlobo. Ulayini wempilo we-FT-X EdgeCore Arc Flash ufakwe isitobhi somugqa wempilo kanye nesixhumi sokuphela komlenze. Uma umsebenzisi enamathiselwe, ulayini wezempilo uyanwebeka futhi uhlehle ngokuhamba komsebenzisi, kugcinwe ngokuzenzakalelayo umugqa wempilo we-taut. Uma ukuwa kwenzeka, uhlelo lwe-centrifugal pawl luyahlanganyela, lumise inkokhelo yomugqa wempilo. Emcimbini wokuwa, Isixhumi se-SRL-FBH sizohlukana nesixhumi se-Shear, futhi i-integrated Energy Absorber (EA) izosebenzisa, kancane kancane ibambe ukuwa. Bheka Ithebula 1A kusithasiselo A ukuze uthole imininingwane yomkhiqizo, impahla, kanye nokusebenza.

I-American National Standards Institute (ANSI) kanye ne-Occupational

Ukuphathwa Kwezokuphepha Nezempilo (OSHA):
I-SRD okuxoxwe ngayo kule manuwali ihlangabezana namazinga we-ANSI Z359.14-2021, ANSI A10.32-2012, kanye nemithethonqubo ye-Occupational Safety and Health Administration (OSHA) 1926.502 kanye ne-1910.140. I-ANSI idinga ukuthi ama-SRD afakwe kusigaba ngokuya ngohlobo lokusetshenziswa umsebenzisi azodalulwa kukho, futhi ahlolwe njengeClass 1 noma Class 2. Ukusebenza okunamandla kusho ukuthi i-SRD ifakwe endaweni yokuhlola yokudonsa. Isisindo sokuhlola sinamathiselwe ku-SRD bese siyehliswa. Imiphumela yokuhlolwa iyarekhodwa.

Amapharamitha aqoshiwe yilawa:

• Ibanga lokuboshwa (AD)
• I-Average Arrest Force (AAF)
• I-Maximum Arrest Force (MAF)

Ibanga Lokuboshwa yinani eliphelele lebanga eliqondile elidingekayo ukuze kuboshwe ukuwa. I-Arrest Distance ihlanganisa ibanga lokuhlehlisa kanye nebanga lokuvula. I-Average Arrest Force iyisilinganiso samandla asetshenziswa emzimbeni kanye nokubambelela ohlelweni lokuvikela ukuwa. I-Maximum Arrest Force inani eliphakeme lamandla angasetshenziswa emzimbeni kanye nokubambelela ohlelweni lokuvikela ukuwa. Ngokungeziwe ekuhloleni okungenhla okwenziwa ngaphansi kwezimo ze-ambient, amayunithi kufanele abe amandla aphakathi nendawo aphezulu ngaphansi kwezimo ezithile zemvelo, lapho amayunithi epholiswa khona, bese ayahlolwa, ashiselwe, bese ehlolwa, noma agcwaliswe emanzini futhi ahlolwe futhi. Amayunithi ahlukene angasetshenziswa ekuhlolweni ngakunye. Yonke imiphumela yokuhlolwa iyarekhodwa.

Le datha yokuhlola ibe isisetshenziswa ukuze kutholwe isisekelo semihlahlandlela yemvume yokuwa eshicilelwe kubhukwana lemiyalo yomsebenzisi.

Ikilasi 1 no-2: Amadivayisi ekilasi 1 azosetshenziswa kuphela kuma-anchorage angaphezulu futhi azowela ngaphansi kokuwa okukhulu kwamafidi angu-2 (0.6 m) noma ngaphansi. Imishini yekilasi 2 ihloselwe izinhlelo zokusebenza lapho i-anchorage engaphezulu ingase ingatholakali noma ingenzeki futhi ibe ngaphansi kokuwa mahhala okungengaphezu kwamafithi angu-6 (1.8 m) phezu konqenqema. Ukuze imenyezelwe njengedivayisi ye-Class 1 ne-Class 2, i-ANSI idinga i-SRD ukuthi ibe ne-overhead Arrest Distance engaphansi kuka-42” (1.1 m), I-Average Arrest Force engaphansi kuka-1,350 lbs (6 kN) [1,575 lbs (7 kN) ) conditioned] kanye ne-Maximum Arresting Force engu-1,800 lbs (8 kN), kukho kokubili ukuhlolwa kwe-ambient nokunesimo. Uma ihlolwe ngamandla ngokuvumelana nezidingo ze-ANSI Z359.14-2021, i-FallTech Class 1 kanye namadivayisi azihoshayo Ekilasi 2 ane-AAF engu-1,350 lbs (6 KN) noma ngaphansi kanye ne-AD engaphansi kuka-42” (1.1 m).

Sicela ubheke Isigaba 5 sale manuwali yemiyalo yomsebenzisi ukuthi ungabala kanjani I-Minimum Required Fall Clearance (MRFC).
I-Class 2 SRL-P's izofaka ilebula ebonisa imvume yokuwa edingekayo lapho usebenzisa idivayisi. Le lebula izonanyathiselwa emkhiqizweni. I-FT-X EdgeCore Arc Flash Class 2 SRL-P ihlanganisa le lebula kukhava yokumunca amandla. Sicela ubheke Isigaba 5.2 sale manuwali yemiyalo yomsebenzisi ukuze ubale I-Minimum Required Fall Clearance (MRFC) usebenzisa amalebula anamathiselwe.

Ulwazi lokuhlukanisa olutholakala kumalebula omkhiqizo lusekelwe emiphumeleni yokuhlola. Ithebula 1B ku-Appendix A lihlinzeka ngemiphumela yokuhlolwa kokusebenza kwe-SRD okuxoxwe ngayo kule manuwali. QAPHELA: Ibanga lokuboshwa lingenye yezingxenye ezimbalwa ze-Minimum Required Fall Clearance (MRFC). I-MRFC ixoxwa ngokuningiliziwe eSigabeni sesi-5.

I-OSHA idinga umkhawulo we-SRD wokuwa kwamahhala ukuya kumafidi angu-2 (0.9 m) noma ngaphansi. Uma ibanga eliphakeme lokuwa lamahhala kufanele lidlulwe, umqashi kufanele abhale phansi, ngokusekelwe kudatha yokuhlola, ukuthi amandla amakhulu okubopha angeke adlule, futhi uhlelo lokuboshwa komuntu siqu luzosebenza kahle. I-SRD okuxoxwe ngayo kuleli bhukwana ihlolwe ngempumelelo ukuze isetshenziswe evundlile futhi iwela phezu konqenqema lwensimbi ngaphandle kwama-burrs, njengoba itholakala kumajamo ensimbi namashidi ensimbi, futhi ingasetshenziswa ezimeni lapho ukuwa kungase kwenzeke phezu kwemiphetho efanayo, njengokutholakala ensimbi. bobunjwa noma sheeting metal. Ukuhlolwa okwengeziwe kwenziwe ku-substrate esemaphethelweni kakhonkolo, ngaphandle nangale kobubanzi be-ANSI Z359. Xhumana ne-Falltech ukuze uthole ulwazi olwengeziwe ngalokhu kuhlola.

Isicelo

Inhloso:
I-FT-XTM EdgeCoreTM Arc Flash Class 2 Leading Edge SRL-P iklanyelwe ukusetshenziswa njengengxenye yePersonal Fall Arrest System (PFAS), ukuhlinzeka ngenhlanganisela yokuhamba komsebenzi kanye nokuvikelwa kokuwa njengoba kudingeka emsebenzini wokuhlola, ukwakha okuvamile. , umsebenzi wokulungisa, ukukhiqizwa kukawoyela, umsebenzi wasemkhathini ovalekile, njll. I-FT-XTM EdgeCoreTM Arc Flash SRL-P ingase isetshenziswe njengesivikelo sokuwa ezinhlelweni ze-Leading Edge lapho ukuwa kungase kwenzeke khona emaphethelweni aphambili.

Uhlelo Lokuboshwa Komuntu Siqu:
I-PFAS inhlanganisela yezingxenye kanye nezinhlelo ezingaphansi ezisetshenziselwa ukubopha umuntu ngesikhathi somcimbi wokuwa. I-PFAS ngokuvamile iqukethe i-anchorage, idivayisi yokwehlisa amandla njenge-Energy Absorbing Lanyard (EAL), Idivayisi Ezihoshayo (SRD), noma i-Fall Arrestor Connecting Subsystem (FACSS), kanye ne-Full Body Harness (FBH) efakwe kahle. . I-SRD okuxoxwe ngayo kule manuwali ingasetshenziswa ezimweni ezingezona zehange. Ubukhulu bokuwa kwamahhala obuvunyelwe ku-PFAS ejwayelekile ngu-6' (1.8 m). Ezinye izinhlelo zokusebenza zingase zibe ngaphansi kwendandatho ye-D, noma ngokuvundlile kuhange elizungezayo le-FallTech SRL elivunyiwe, eliklanyelwe ukusetshenziswa okunjalo.

Umfanekiso 3 - Izindawo Zokubambelela

1. Ukubambelela kwe-SRD Kuzinga Lonyawo ngokuhlehlisa okungu-0' kusuka ku-Leading Edge
2. Ukubambelela kwe-SRD Kuzinga Lonyawo ngokuhlehlisa okungu-5' kusuka ku-Leading Edge
3. I-Anchorage Ephezulu Ye-SRD Ngaphezu Kwe-D-Ring Ye-Dorsal
4. I-Anchorage ye-SRD Ngenhla Kwe-Dorsal D-Ring ene-5' Setback kusukela ku-Leading Edge

I-Horizontal Lifeline (HLL) kanye Nezinhlelo Zesitimela:
I-SRL ingase inamathiselwe kumahange aqinile navumelana nezimo inqobo nje uma zonke izinhlelo ze-HLL noma zesistimu kaloliwe, ukufakwa, nokusetshenziswa kungaphansi kokuqondisa Komuntu Ofanelekayo.

Takula:
Qinisekisa ukuthi uhlelo lokuhlenga olubhaliwe, indlela, kanye nohlelo lukhona futhi lutholakala kalula ukuze kuphendulwe ngokushesha. Ukuhlenga kungase kudinge okokusebenza okukhethekile noma izinyathelo. Imisebenzi yokutakula ingaphezu kobubanzi baleli bhukwana. Bheka i-ANSI Z359.4.

Imikhawulo yohlelo lokusebenza:
Thatha isinyathelo ukuze ugweme ukunyakaza kwemishini, izindawo eziqhumayo, nezishisayo, zikagesi, okuhlanganisa i-arc evela kuzinhlelo zokushisela, kanye nezingozi zamakhemikhali njengoba ukuthintana kungase kulimaze i-SRL, okungase kubangele ukulimala okubi kakhulu noma ukufa. I-SRL ayakhelwe ukusetshenziswa ekuzithibeni, ekugibeleni izisebenzi, ekumisweni, noma ekumiseni umsebenzi. Izinhlelo zokusebenza zokutakula zingaphezu kobubanzi baleli bhukwana. Ungayisebenzisi i-SRL kulezi zinhlelo zokusebenza ngaphandle kwe-PFAS eyisipele.

Izidingo Zesistimu

Amandla:
I-FT-XTM EdgeCoreTM Arc Flash Class 2 Leading Edge SRL-P yakhelwe ukusetshenziswa umsebenzisi oyedwa onesisindo esihlanganisiwe somsebenzisi, amathuluzi, izingubo zokugqoka, njll., ze:

• a. 130 - 310 lbs. (59 – 141 kg) ukuze ihambisane ne-ANSI ne-OSHA
• b. 130 - 420 lbs. (59 – 191 kg) ukuze uhambisane ne-OSHA kuphela

Ukuhambisana Kwezixhumi:
Izixhumi zibhekwa njengezihambisana nezakhi zokuxhuma lapho zenzelwe ukusebenza ndawonye ngendlela yokuthi ubukhulu bazo kanye nokuma kwazo kungabangeli ukuthi izindlela zazo zesango zivuleke kungaqondile kungakhathaliseki ukuthi zibheke kanjani. Xhumana ne-FallTech uma unemibuzo mayelana nokuhambisana. Izixhumi kufanele zihambisane ne-anchorage noma ezinye izingxenye zesistimu. Ungasebenzisi okokusebenza okungahambisani, bheka uMdwebo 4. Izixhumi ezingahambelani zingase zikhiphe kungahlosile. Izixhumi kufanele zihambisane ngosayizi, umumo, namandla. Izixhumi ezizivalayo, ezizikhiyayo zidingeka i-ANSI ne-OSHA.

Umfanekiso 4 - Ukuxhumana Okungahambelani
A	Ungalokothi uxhume izingxenye ezimbili ezisebenzayo (ama-snap hook noma ama-carabiner) kwenye.
B	Ungalokothi uxhume izingxenye ezimbili ezisebenzayo (ama-snap hook noma ama-carabiner) ku-D-ring eyodwa ngesikhathi esisodwa.
C	Ungalokothi uxhume ngendlela engaveza isimo sokulayisha esangweni.
D	Ungalokothi unamathisele entweni ngendlela lapho isango (le-snap hook noma i-carabiner) lizovinjelwa ukuba livaleke futhi likhiye ngokugcwele. Hlala njalo uqaphe ukuxhumana okungamanga ngokuhlola ngokubona ukuvala nokukhiya.
E	Ungalokothi unamathisele ngokusobala ingxenye engaphansi (webi-bing, intambo noma intambo) ngaphandle uma kuhlinzekwe ngokuqondile yimiyalelo yomkhiqizi yazo zombili izingxenye ezingaphansi (i-snap hook noma i-carabiner kanye webi-bing, intambo, noma intambo).
F	Ungalokothi unamathisele ngendlela lapho ingxenye yesixhumi (isango noma isileva sokukhulula) ingase ibanjwe ihange ngaleyo ndlela ikhiqize ingozi eyengeziwe yokubandakanyeka okungamanga.
G	Ungalokothi unamathisele ihuku le-spreader snap hook kuma-D-rings amabili aseceleni/okuma ngendlela lapho ama-D-rings ezohlanganisa amasango; amasango ku-spreader kufanele ahlale ebheke kude nama-D-rings ngesikhathi sokumiswa komsebenzi.

Ukuhambisana Kwezingxenye:
Okokusebenza kuklanyelwe ukusetshenziswa nezingxenye ezigunyaziwe namasistimu angaphansi kuphela. Ukushintshwa noma ukushintshwa okwenziwe ngezinto ezingagunyaziwe noma amasistimu angaphansi kungase kubeke engcupheni ukusebenzisana kwezisetshenziswa futhi kungase kuthinte ukuphepha nokuthembeka kwesistimu ephelele.

Ukwenza Izixhumanisi:
Sebenzisa kuphela izixhumi ezizikhiyayo ngalesi sisetshenziswa. Sebenzisa kuphela izixhumi ezifanele uhlelo lokusebenza ngalunye. Qinisekisa ukuthi konke ukuxhumana kuyahambisana ngosayizi, umumo, namandla. Ungasebenzisi okokusebenza okungahambisani. Qinisekisa ukuthi zonke izixhumi zivaliwe futhi zikhiyiwe. Izixhumi zenzelwe ukuthi zisetshenziswe kuphela njengoba kushiwo emiyalweni yomsebenzisi yomkhiqizo ngamunye.

Uhlelo Lokuboshwa Komuntu Siqu:
I-PFAS inhlanganisela yezingxenye kanye nezinhlelo ezingaphansi ezisetshenziselwa ukubopha umuntu ngesikhathi somcimbi wokuwa. I-PFAS ngokuvamile yakhiwa i-anchorage kanye ne-FBH, enomshini wokuxhuma odonsa amandla, okungukuthi, i-SAL, i-SRL, noma i-Fall Arrester Connecting Subsystem (FACSS), exhunywe ku-D-ring ye-FBH. Izingxenye ze-PFAS ezisetshenziswa ngokuhambisana nale SRL kufanele zithobelane nezimfuneko ze-ANSI Z359 kanye nemithetho ye-OSHA esebenzayo.

Amandla Amaphakathi Okuboshwa Nebanga Lokuboshwa:
Ithebula 1B ku-Appendix A inikeza idatha yokuhlola kuzibaluli zokusebenza ezijwayelekile zamapharamitha amathathu ayinhloko: Ibanga Lokuboshwa, I-Average Arrest Force, kanye ne-Maximum Arrest Force, esohlwini ngenombolo yemodeli nesigaba. Ukuhlola kwenziwa ngaphansi kwezimo ezihlukahlukene zemvelo, ezingeni lokushisa elizungezile, ukushisa, ukubanda, nezimo ezimanzi. Ezivivinyweni zomkhiqizi, izici zokusebenza ezimbi kakhulu ze-SRL, ezixhumeke ku-5' ngezansi kwe-D-ring ye-dorsal kuhlelo lokusebenza lwe-Leading Edge yilezi:

5' Ngezansi kwe-D-Ring, I-Leading Edge	130 kuya ku-310 lbs. (59 kuya ku-141 kg)	130 kuya ku-420 lbs. (59 kuya ku-191 kg)
Ibanga elide kakhulu lokuboshwa	122" (3.1 m)	155" (3.9 m)
Amandla Okuboshwa Okumaphakathi Okukhulu Kakhulu	830 lbs (3.7 kN)	780 lbs (3.4 kN)
Amandla Okuboshwa Okukhulu Kakhulu	1,618 lbs (7.2 kN)	1,246 lbs (5.5 kN)

Umuntu Onekhono angathola le datha iwusizo ekuhleleni indawo okubambelela kuyo kanye nokubala imithwalo yokuboshwa kokuwa kanye namabanga ukusuka ezingeni lokuhamba/lokusebenza ukuya endaweni ethiyekile eseduze noma izinga eliphansi. Bheka Isigaba 5.
QAPHELA: Ibanga lokuboshwa liyingxenye eyodwa ye-Minimum Required Fall Clearance (MRFC). I-MRFC inqunywa ngokucabangela izici eziningi ekuvikelweni kokuwa. Okunamathiselwe ngaphansi kwezinga le-FBH D-ring kuzodinga imvume eyengeziwe yokuwa. I-MRFC kuxoxwa ngayo ngokuningiliziwe eSigabeni sesi-5.

Amandla Akhonjwa Esistimu Yokubanjwa Ukuwa Komuntu Siqu:
I-anchorage ekhethelwe isicelo se-PFAS kufanele ibe namandla okusekela umthwalo omile osetshenziswe lapho kuvunyelwe i-PFAS okungenani:

• a. Izikhathi ezimbili amandla okuboshwa aphezulu avunyelwe lapho isitifiketi sikhona, noma
• b. 5,000 lbs. (22.2 kN) uma singekho isitifiketi.
• Khetha indawo yokukhosela ngokucophelela. Cabangela amandla esakhiwo, izithiyo endleleni yokuwa, kanye nezingozi zokuwa ngokushwibeka. Ezimweni ezithile, umuntu oqeqeshiwe angakwazi ukunquma ukuthi isakhiwo esinikeziwe siyakwazi ukumelana ne-MAF esetshenzisiwe ye-PFAS ngesici sokuphepha okungenani ezimbili, njengoba kudingwa i-OSHA.

Ukufakwa nokusetshenziswa

ISEXWAYISO
Ungashintshi noma usebenzise kabi lesi sisetshenziswa ngamabomu. Bheka i-FallTech lapho usebenzisa lesi sisetshenziswa ngokuhlangene nezingxenye noma amasistimu angaphansi kwalawo achazwe kule manuwali. Zonke izingxenye noma amasistimu angaphansi asetshenziswa ne-SRD okuxoxwe ngawo kule manuwali kufanele ahambisane ne-ANSI Z359 kanye/noma i-OSHA. Ungasebenzisi amahhuku e-rebar, ama-carabiner amakhulu noma ama-snap hook amakhulu ukuze uxhume kuma-FBH dorsal D-rings noma kunoma iyiphi indawo eyi-diayore encane yehange engahambelani ngoba lokhu kungase kubangele isimo sokukhishwa kanye/noma ukuyekwa okungahlosiwe.

Ukufakwa ku-Full Body Harness
Ukufakwa kwakho kokubili umlenze owodwa kanye nowe-Twin-leg ye-FT-XTM EdgeCoreTM Arc Flash Class 2 Leading Edge SRL-P landela izinyathelo ezifanayo ezibalwe ngezansi:

• Isinyathelo 1: Ku-FBH, phakamisa i-D-ring ye-dorsal uye endaweni ebheke phezulu, bese ukhulula impambano yazo zombili. web amabhande adlula ku-D-ring slot ukuze enze izihibe ezixegayo ezingaba ngu-2” njengoba kukhonjisiwe kuMfanekiso 5A. Qaphela ukuthi amanye amahhanisi angase abe nomhubhe owakhelwe ngaphakathi.
• Isinyathelo 2: Cindezela zombili izinkinobho zokukhulula bese uslayida ibha yokukhiya endaweni evulekile njengoba kukhonjisiwe kuMfanekiso 5B.
• Isinyathelo 3: Namathisela isixhumi kumaluphu axegekile ngokufaka ibha yokukhiya phakathi kwezihibe ezixegayo njengoba kuboniswe kuMfanekiso 5C.
• Isinyathelo 4: Qinisekisa ukuthi ibha yokukhiya ifakwe ngokugcwele futhi isendaweni ekhiyiwe, bheka uMdwebo 5D.

Ukunamathisela ku-Anchorage

Hlola indawo yokusebenza ukuze uthole izingozi ezingaba khona. Qaphela ukuze ugweme izingozi ezinjengama-cranes, izigxobo, izintambo zikagesi ezihamba phezulu, nobungozi bendawo yokuhamba/yokusebenza njengezintambo zikagesi, imithombe yokushisela, amapayipi omoya noketshezi, okuhlanganisa izingozi ezithiyo njengamakholomu aqondile nezitaki zezinto ezisezingeni eliphansi. . Susa izingozi lapho kungenzeka khona. Qinisekisa ukuthi i-anchorage inikeza I-Minimum Required Fall Clearance (MRFC) endleleni yokuwa ngezansi kwendawo yokuhamba/yokusebenza ukuze kuvinjelwe ukushaya ileveli ephansi noma ukuvinjwa phakathi nesenzakalo sokuwa. Thatha isinyathelo ukuze ugweme ukuwa kwama-swing, okwenzeka lapho i-anchorage ingekho ngokuqondile ngaphezu kwendawo lapho ukuwa kwenzeka khona Ukususwa kokuwa kanye nokuwa kwama-swing kungaphansi kwezimo eziguquguqukayo. Ukuphakama kwehange, ukunyakaza okubheke eceleni, kanye nebanga lokuhlehlisa konke kuthinta indawo yehange ngokuphathelene nokususwa kokuwa nokuwa kwama-swing. I-SRL ingase inamathiselwe kuhange elingaphezulu, okungukuthi, ngaphezu kwe-FBH dorsal D-ring yomsebenzisi, noma ihange elingelona phezulu, okungukuthi, ngaphansi kwe-FBH dorsal D-ring yomsebenzisi. Ihange elingaphumi phezulu lingase libe umkhawulo ongu-5' (1.5 m) ngaphansi kwe-FBH dorsal D-ring yomsebenzisi. Izindawo zezikhonkwane ezingekho phezulu ziholela ekuxhumaneni okukhulu phakathi kwentambo yokuphila kanye nonqenqema futhi zethule izingozi ezinkulu zokuhuzuka. Ukusetshenziswa kwe-D-ring engezansi kufanele kube njengendlela yokugcina, lapho ingekho enye inketho yehange ekhona. Ukuhlolwa kokusebenza kubonise ukuthi umcimbi wokuwa onqenqemeni oluphambili uzoshintsha izici zokusebenza kwe-SRL kanye nezidingo zokuwa. Uma ifakwe ihange ngaphansi kwe-FBH emuva kwe-D-ring, imicimbi yokuwa izoholela ekuvuleni okukhulu kakhulu. Amabanga ancishisiwe okubuyela emuva azokwandisa nezidingo zokuvunyelwa. I-anchorage engekho phezulu uma i-SRL ibuyiselwa emuva ngaphansi kuka-5' (1.5 m) izophumela ku-MRFC enkulu kakhulu kanye nenani elincane lokuhamba komsebenzi ngenxa yokuwa kokushwibeka. Amabanga amakhudlwana asethelwe emuva angu-5' (1.5 m) noma ngaphezulu azonciphisa i-MRFC iyonke futhi avumele ukunyakaza okuthe xaxa kwesisebenzi uma sixhunywe ku-anchorage engekho ngaphezulu. Uma i-geometry yendawo yomsebenzi ikuvumela, ibanga lokuhlehla elingu-5' (1.5 m) liyanconywa ukuthatha i-advan ephelele.tage yokusebenza kwe-SRL. Ukwengeza, I-engeli Yokuqondisa Kabusha yolayini bokuphila, okungukuthi, i-engeli yolayini wempilo njengoba idlula onqenqemeni, kufanele ibe ngamadigri angu-90 noma ngaphezulu, ingalokothi ibe ngaphansi, bheka uMdwebo 6. Unganamathiseli isixhumi se-ankorage ngendlela yokuthi ibeka umphetho phezulu kunesixhumi, bheka uMfanekiso 6.

Umfanekiso wesi-6 - I-Engle Yomphetho Ohamba phambili we-Lifeline Ukuqondisa kabusha

Ukusebenzisa i-FT-XTM EdgeCoreTM Arc Flash Class 2 Leading Edge SRL-P

Ngaphambi kokusetshenziswa ngakunye, hlola i-FT-XTM EdgeCoreTM Arc Flash ngokuhambisana neSigaba 7. Khipha idivayisi kusevisi uma ukuhlolwa kubonisa umonakalo noma noma yikuphi ukungasebenzi. Donsela i-FBH (ene-FT-XTM EdgeCoreTM Arc Flash enamathiselwe) ngokuvumelana nemiyalelo yomkhiqizi wamahhanisi. Landela imiyalelo equkethwe kule ncwajana nasemalebula. Ukwehluleka ukulandela imiyalelo kungase kubangele ukulimala okubi kakhulu noma ukufa. Xhuma isixhumi esisekupheleni komlenze endaweni yokubambelela egunyaziwe. Qinisekisa ukuthi isixhumi siyavala futhi siyakhiya. Ekucushweni kwe-Twin-leg, namathisela isixhumi sokuphela komlenze esingasetshenzisiwe kumgcini we-FBH's lanyard. Qinisekisa ukuthi konke ukuxhumana kuyahambisana. Ukusebenza okuvamile kuzovumela ubude bokusebenza bomugqa wempilo ukuthi bunwebeke futhi buhoxiswe njengoba isisebenzi sihambahamba. Uma usebenzisa ukucushwa kwe-Twin-leg, kuyenzeka ukuthi uhambe ulandelane phakathi kwamaphoyinti okubambelela ngokubopha okungu-100% njengoba kubonisiwe kuMfanekiso 7.

Umfanekiso 7 - I-Twin-Leg SRL-Ps ye-Lateral Movement

Gwema ukunyakaza okungazelelwe noma okusheshayo ngesikhathi sokusebenza okuvamile, njengoba lokhu kungase kubangele isistimu ye-pawl ye-SRL ukuthi ihlanganyele futhi ngokunokwenzeka kubangele ukulahlekelwa ibhalansi, okungase kubangele ukulimala noma ukufa. Uma ukuwa kwenzeka, isistimu ye-pawl izozibandakanya futhi ikhiye intambo yokuphila. I-EA izosebenzisa ukubopha ukuwa futhi inciphise amandla okubopha kumsebenzisi.

Indlela yokukhiya:
I-SRD isebenzisa indlela yokukhiya esekelwe ekusheshiseni. Umsebenzi wokukhiya udinga inani elithile lenkokhelo ngesikhathi sesehlakalo sokuwa ukuze usebenze ngendlela efanele. Izimo ezithile, zivaliwe noma crampizindawo ezihlelekile, unyawo olunyakazayo njengesihlabathi, igravel, okusanhlamvu, noma indawo etshekile ingase ingavumeli ulayini wezempilo ukuthi ufinyelele isivinini esanele sokuvula indlela yokukhiya. Kudingeka indlela ecacile ukuze kuqinisekiswe ukukhiya okuhle kwe-SRD. Qinisekisa ukuthi isikhiya sisebenza kahle. Donsa ulayini wezempilo uhambe ibangana elincane bese uwudonsa ngokucijile. Ulayini wezempilo kufanele ukhiywe. Uma yehluleka ukukhiya, yisuse kusevisi ngokushesha. Qinisekisa ukuthi indawo yokusebenza ihlala ngaphakathi kwemingcele eshiwo. Qaphela izingozi ze-Leading Edge.

Inkomba ebonakalayo:
Inkomba eyinhloko ebonakalayo isixhumi sokugunda. Ama-halves okuxhuma okugunda azohlukana uma i-SRL-P ingaphansi kwamandla okuboshwa, njengoba kuboniswe kuMfanekiso 8, Isithombe B. Uma isixhumi sokugunda sihlukaniswa, susa iyunithi enkonzweni. Ezibonisini ezibonakalayo ezisetshenzisiwe, kokubili ama-SRD kanye nesixhumi samandla kuzokhishwa kusevisi futhi kucekelwe phansi. Amayunithi e-SRD ngeke ahlengwe futhi aphinde asetshenziswe nezinye izinto ezimunca amandla.

Ngemva Kokuwa:
Isehlakalo sokuwa phezu konqenqema singase sidinge izinto zokuhlenga ezikhethekile nezilinganiso. Qinisekisa ukuthi uhlelo lokuhlenga olubhaliwe, indlela kanye nohlelo lukhona futhi lutholakala kalula kubo bonke abasebenzisi ukuze baphendule ngokushesha. Qinisekisa ukuthi bonke abasebenzisi baqeqeshiwe ezinkambisweni zokuhlenga. Uma kwenzeka ukuwa, yisuse kusevisi, futhi uyigcine ngokuhlukene. Susa enkonzweni noma iyiphi iyunithi engaphansi kwamandla okubopha noma ebonisa umonakalo ohambisana nalawo mandla. Ngemibuzo, xhumana ne-FallTech.

Ukusebenzisa i-SRD:
Ungayisebenzisi i-SRD uma ukuhlola kukhombisa umonakalo noma ukungasebenzi kahle. Nikela i-FBH ngokuhambisana nemiyalelo yomkhiqizi we-FBH. Landela imiyalelo equkethwe kule ncwajana nasemalebula. Ukwehluleka ukulandela imiyalelo kungase kubangele ukulimala okubi kakhulu noma ukufa. Xhuma Isixhumi se-SRL-FBH ku-D-ring yangemuva ku-FBH. Qinisekisa ukuthi isixhumi siyavala futhi siyakhiya. Namathisela i-carabiner yokuphela komlenze ku-anchorage ekhethiwe futhi uqinisekise ukuthi isixhumi sokuphela komlenze siyavala futhi sikhiye. Qinisekisa ukuthi konke ukuxhumana kuyahambisana. Ukusebenza okuvamile kuzovumela ubude bokusebenza bomugqa wempilo ukuthi bunwebeke futhi buhoxiswe njengoba isisebenzi sihambahamba. Inani elithile lokushuba kufanele lihlale kukhebula ngaso sonke isikhathi ukuze kuqinisekiswe ukusebenza kahle kwebhuleki langaphakathi. Ungavumeli ulayini wezempilo ukuthi untekenteke. Uma ulayini wezempilo untenga, susa i-SRD kusevisi ukuze ihlolwe. Bheka Isigaba 7. Gwema ukunyakaza okungazelelwe noma okusheshayo phakathi nomsebenzi ojwayelekile, njengoba lokhu kungase kubangele ibhuleki le-SRD ukuthi libambe iqhaza futhi kubangele ukulahlekelwa ibhalansi nokulimala noma ukufa. Uma kuwa, ibhuleki lizosebenza futhi likhiye umzila wokuphila. I-EA izosebenzisa ukubopha ukuwa futhi inciphise amandla okubopha kumsebenzisi.

• UNGANWULI umugqa wempilo udlule umkhawulo wokusebenza.
• UNGAVUMI ulayini wempilo owodwa we-SRD uphithane noma usongwe ngolunye ulayini wezempilo we-SRD ngesikhathi sokusetshenziswa.
• UNGAVUMI noma yimuphi umzila wokuphila ukuba udlule ngaphansi kwezingalo noma phakathi kwemilenze ngesikhathi sokusebenzisa.
• UNGAQHUBEKIamp, ifindo, noma ukuvimbela intambo yokuphila ukuthi ihoxise noma ibe yinhlese.
• UNGAYENZISI i-SRD ngokuxhuma ulayini wezempilo noma ingxenye efanayo.
• UNGAVUMELI umzila wokuphila ukuthi uhlale ngaphandle kwendlu uma ungasetshenziswa.

Ibala Ubuncane Bemvume Edingekayo Yokuwa

I-FT-X ku-Overhead, Isicelo Se-Anchorage esingaholi [130 ukuze 310 lbs. (59 kuya ku-141 kg) umsebenzisi]

I-FT-X ingase isetshenziswe njenge-SRD evamile esimweni esiphezulu, lapho i-SRD ifakwe noma yikuphi endaweni evumelekile yokunamathisela, esukela ngokuqondile ngaphezu komsebenzisi ukuya kuleveli ye-FBH D-ring, njengoba kubonisiwe. emifanekisweni 9. Isimo esiphansi esidingekayo sokuwa imvume yokuwa (MRFC) sibalwa kusetshenziswa amamethrikhi amane, akalwa endaweni ehambayo: I-SRD Deceleration Distance, D-Ring Shift kanye neHarness Stretch [1 ft (0.3m)], Safety Factor [1.5 ft (0.5m)], kanye ne-Swing Fall. Umdwebo oseMfanekiso 11 ubalwa kusetshenziswa idatha yokusebenza ye-SRD futhi uhlanganisa wonke amamethrikhi amane abalwe ngaphambilini ukuze kunqunywe i-MRFC.

5.4.2 I-FT-X ene-Non-Overhead Anchorage Leading Edge Anchorage Application [130 kuya ku-310 lbs. (59 kuya ku-141 kg) umsebenzisi]
Unqenqema oluhamba phambili/ngezansi kwesimo se-D-ring ubuncane bemvume yokuwa edingekayo (MRFC) ibalwa kusetshenziswa amamethrikhi amahlanu, akalwa endaweni ehambayo yokusebenza: I-SRD Deceleration Distance, D-Ring Shift kanye ne-Harness Stretch [1 ft (0.3m)], I-Safety Factor [1.5 ft (0.5m)], Ubude be-Dorsal D-ring [5 ft (1.5m)], kanye ne-Swing Fall. Ubude bendandatho ye-Dorsal yengezwe ku-akhawunti ye-D-ring tie-off engezansi uma kuqhathaniswa nesimo esiphezulu.

Umfanekiso 11 – FT-X Ubuncane Obuncane Bemvume Edingekayo Yokuwa ku-130 kuya ku-310 lbs. (59 kuya ku-141 kg) Abasebenzisi

• Unyawo olu-1 (0.3 m) ukunyuswa eduze kwe-X-Axis kumele Ibanga Elivundlile ukuya ku-Anchorage umsebenzisi asebenzela kude ne-SRD.
• Unyawo olu-1 (0.3 m) ama-increments phezulu ku-Y-Axis kumelela Ukuphakama Kwe-Anchorage kusukela ku-D-Ring ye-Dorsal yomsebenzisi.
• ExampLe 1:
  Uma umsebenzisi esebenza ngamafidi angu-3 (0.9 m) ukusuka ku-SRD, futhi i-SRD ibambelele phakathi kwe-Dorsal D-Ring yomsebenzisi noma kufika ku-2.0 ft (0.6 m) ngaphezu kwe-D-Ring. Ubuncane bemvume yokuwa edingekayo ngamafidi angu-12 (3.7m) okuhlanganisa ukuwa komjiko.
• ExampLe 2:
  Uma umsebenzisi edinga ukusebenza amafidi angu-4 (1.2 m) ukusuka ku-SRD ngasemaphethelweni, futhi i-SRD ibambelele kuleveli yonyawo, imvume encane yokuwa edingekayo ingamamitha angu-20 (6.1m) okuhlanganisa ukuwa kokuswayipha.

5.4.3 FT-X in Overhead, Non-Leading Edge Anchorage Application [310 kuya ku-420 lbs. (141 kuya ku-11 kg) umsebenzisi]
I-FT-X ingase isetshenziswe njenge-SRD evamile esimweni esiphezulu, lapho i-SRD ifakwe noma yikuphi endaweni evumelekile yokunamathisela, esukela ngokuqondile ngaphezu komsebenzisi ukuya kuleveli ye-FBH D-ring, njengoba kubonisiwe. emifanekisweni 9. Isimo esiphansi esidingekayo sokuwa imvume yokuwa (MRFC) sibalwa kusetshenziswa amamethrikhi amane, akalwa endaweni ehambayo: I-SRD Deceleration Distance, D-Ring Shift kanye neHarness Stretch [1 ft (0.3m)], Safety Factor [1.5 ft (0.5m)], kanye ne-Swing Fall. Umdwebo oseMfanekiso 14 ubalwa kusetshenziswa idatha yokusebenza ye-SRD futhi uhlanganisa wonke amamethrikhi amane abalwe ngaphambilini ukuze kunqunywe i-MRFC.

5.4.4 I-FT-X ene-Non-Overhead Anchorage Leading Edge Anchorage Application [310 ukuze 420 lbs. (141 kuya ku-191 kg) umsebenzisi]
Unqenqema oluhamba phambili/ngezansi kwesimo se-D-ring ubuncane bemvume yokuwa edingekayo (MRFC) ibalwa kusetshenziswa amamethrikhi amahlanu, akalwa endaweni ehambayo yokusebenza: I-SRD Deceleration Distance, D-Ring Shift kanye ne-Harness Stretch [1 ft (0.3m)], I-Safety Factor [1.5 ft (0.5m)], Ubude be-Dorsal D-ring [5 ft (1.5m)], kanye ne-Swing Fall. Ubude bendandatho ye-Dorsal yengezwe ku-akhawunti ye-D-ring tie-off engezansi uma kuqhathaniswa nesimo esiphezulu.

Umfanekiso 14 – FT-X Ubuncane Obuncane Bemvume Edingekayo Yokuwa ku-310 kuya ku-420 lbs. (141 kuya ku-191 kg) Abasebenzisi

• Unyawo olu-1 (0.3 m) ukunyuswa eduze kwe-X-Axis kumele Ibanga Elivundlile ukuya ku-Anchorage umsebenzisi asebenzela kude ne-SRD.
• Unyawo olu-1 (0.3 m) ama-increments phezulu ku-Y-Axis kumelela Ukuphakama Kwe-Anchorage kusukela ku-D-Ring ye-Dorsal yomsebenzisi.
• ExampLe 1:
  Uma umsebenzisi esebenza ngamafidi angu-3 (0.9 m) ukusuka ku-SRD, futhi i-SRD ibambelele phakathi kwe-Dorsal D-Ring yomsebenzisi noma kufika ku-1.0 ft (0.3 m) ngaphezu kwe-D-Ring. Ubuncane bemvume yokuwa edingekayo ngamafidi angu-14 (4.3 m) okuhlanganisa nokuwa komjiko.
• ExampLe 2:
  Uma umsebenzisi edinga ukusebenza amafidi angu-4 (1.2 m) ukusuka ku-SRD ngasemaphethelweni, futhi i-SRD ibambelele kuleveli yonyawo, imvume encane yokuwa edingekayo ingamamitha angu-24 (7.3 m) okuhlanganisa ukuwa kokuswayipha.

Isondlo, Isevisi, kanye Nesitoreji

Ukunakekela:
Qinisekisa ukuthi i-SRL igcinwa ingenawo upende oweqile, amafutha, ukungcola noma okunye ukungcola njengoba lokhu kungase kubangele ukungasebenzi kahle komugqa wempilo noma indlela yokuhlehlisa. Qinisekisa ukuthi akukho doti engena endlini. Hlanza ingaphandle leyunithi njengoba kudingeka ngomuthi wokugeza/wamanzi. Ungavumeli amanzi noma ezinye izinto ezibangela ukugqwala ukuthi zingene endlini. Ngemva kokuhlanza, donsa umugqa wempilo yonke indlela yokuphuma, vumela iyunithi ukuthi yome, bese uhoxisa ulayini wezempilo uye kuyunithi. Hlanza amalebula njengoba kudingeka.

• UNGASEBENZISI ukushisa ukuze wome.
• UNGAZAMI ukuqaqa i-SRL.

Isevisi:
Uma isevisi idingeka nganoma yisiphi isizathu, njengokwehluleka ukuhlola, ukulayishwa komthelela, noma yiluphi uhlobo lokungasebenzi kahle, tag iyunithi njengokuthi "AKUSUSEKILE" futhi uyisuse kusevisi. Lo mkhiqizo uhlanganisa isici esivumela ama-SRD abalulekile ukuthi ashintshwe ngawodwana uma ulayini wezempilo we-SRD ugugile noma ulinyazwa ngesikhathi sokusetshenziswa okuvamile. Noma yimuphi umonakalo wephekhi yokushaqeka noma inkomba yokubona esetshenzisiwe ngeke futhi ngeke iseviswe noma ilungiswe. Uma isikhishiwe kusevisi, iyunithi ye-SRD ingakhishwa futhi ishintshwe kusetshenziswa Ithuluzi le-Spanner le-5049. Ukushintshwa kweyunithi ye-SRD kuzokwenziwa kuphela Umuntu Onekhono noma Isikhungo Esigunyaziwe Sokulungisa I-FallTech. Funda futhi ulandele Imanuwali Yokusebenzisa Ithuluzi Le-Spanner (448-00009). Ukwehluleka ukwenza kanjalo kungabangela i-SRL ukuthi isebenze ngendlela engafanele, okungaholela ekulimaleni okubi kakhulu noma ukufa. I-SRL kufanele ihlolwe Umuntu Onekhono ngaphambi kokubuyela kusevisi. Ukuze ucele i-5049 Spanner Tool, xhumana ne-FallTech.

Isitoreji:
Gcina i-FT-X EdgeCore Arc Flash endaweni epholile, eyomile, ehlanzekile ngaphandle kwelanga eliqondile. Misa i-SRL ukuze amanzi amaningi aphume. Gwema ukuchayeka kumakhemikhali noma umhwamuko oyi-caustic. Hlola ngokucophelela i-SRL ngemva kwanoma yisiphi isikhathi sesitoreji esinwetshiwe.

Ukuhlola

Ukuhlola Umsebenzisi Ngaphambi Kokusebenzisa:
Yenza ukuhlola ngaphambi kokusetshenziswa ngakunye ngokuhambisana nezincomo ezikuThebula 1 ngezansi.

Ithebula 1 – Imihlahlandlela Yokuhlola I-FT-X EdgeCore Arc Flash SRL
Ukuhlola	Dlula	Yehlulekile
Ulayini wokuphila kufanele ukhiphe futhi uhlehle ngokuphelele futhi ngaphandle kokuntengantenga futhi kufanele uhlale uqinile ngaphansi kwengcindezi ngaphandle kokuhlehla.
Khipha umugqa wempilo amayintshi ambalwa bese usebenzisa ukudonsa okuqinile ukuze uqinisekise izingidi ze-SRL. Ukukhiya kufanele kube okuqinisekile futhi ngaphandle kokushushuluza. Phinda lokhu kukhiya kwezinye izindawo ngobude bomugqa wempilo ukuze uqinisekise ukuthi i-SRL isebenza kahle.
Hlola bonke ubude bomugqa wokuphila ukuze uthole imihuzuko, izintambo eziphukile noma ezingaqaqekile, ukusha, ukusikeka noma amafindo. Hlola umonakalo ovela kudoti, upende, amafutha, noma uwoyela. Hlola ukushintsha kombala noma omunye umonakalo odalwe ukuchayeka kumakhemikhali noma ukushisa okudlulele. Hlola ukuqhekeka noma omunye umonakalo ovela ekuchayekeni ngokwedlulele ekukhanyeni kwe-ultraviolet. Uma noma yimiphi yale mibandela ikhona, susa i-SRL-P enkonzweni ngokushesha.
Hlola Isixhumi se-SRL-FBH ukuze uthole ukuqhekeka, ukuphuka, noma ukungqubuzana. Qinisekisa ukuthi ibha yokukhiya isendaweni ekhiyiwe.
Bheka i-Energy Absorber ukuze uthole ukuklebhula, izinyembezi, noma omunye umonakalo.
Hlola i-Connector Assembly ukuze uthole imifantu, ama-deformation, noma omunye umonakalo.
Hlola iyunithi ye-SRL iyonke ukuze uthole noma yiziphi izinkomba zokuwohloka noma zokulimala.
Wonke amalebula kufanele abe msulwa futhi afundeke.

Uma ukuhlola kuveza amaphutha noma ukulimala kwezinto zokusebenza, susa okokusebenza kusevisi.

Imvamisa Yokuhlola:
Ukuhlolwa ngumuntu onekhono ngezikhathi ezithile kuyadingeka. Umuntu Onekhono uzosebenzisa ulwazi kuThebula 2, Izincomo Zokuhlola Ze-SRL, ukuze anqume ukuvama kokuhlola. Sebenzisa Ithebula 2 ukuze unqume ukuvama kokuhlola. Ukuhlola okwenziwa yimboni egunyaziwe yokuhlola ngezikhathi ezithile nakho kuyanconywa.

Uhlu Lokuhlola:
Sebenzisa Ithebula 1: Izinkombandlela Zokuhlola I-FT-X EdgeCore Arc Flash SRL ukuze uhlole i-SRL.

Imiphumela Yokuhlola:
Uma ukuhlola kuveza amaphutha noma ukulimala kwempahla, ukunakekelwa okunganele, noma izinkomba zokuwa ezicushiwe, susa okokusebenza enkonzweni.

Idokhumenti Yokuhlola:
Rekhoda imiphumela yokuhlolwa Kurekhodi Lokuhlola elinikezwe ngezansi noma kudokhumenti efanayo.

Ithebula 2 - Izincomo Zokuhlola ze-ANSI Z359.14-2021 SRL
Uhlobo Lokusetshenziswa	Isicelo ExampLes	Imibandela Yokusebenzisa	Ukuhlola Imvamisa Umuntu Onekhono
Akuvamile Ukusetshenziswa Kokukhanya	Ukuhlenga kanye Nesikhala Esivalekile, Ukugcinwa Kwefekthri	Izimo Ezinhle Zesitoreji, Ezisendlini noma Ezingavamile Ukusetshenziswa kwangaphandle, izinga lokushisa legumbi, Indawo ehlanzekile	Minyaka yonke
Kuphakathi ku Ukusetshenziswa Kakhulu	Ezokuthutha, Ukwakhiwa Kwezindawo Zokuhlala, Izinsiza, Isitolo	I-Fair Storage Conditions, Ngasendlini futhi inwetshiwe ukusetshenziswa kwangaphandle, Wonke amazinga okushisa, Indawo ehlanzekile noma enothuli	Semi-ngonyaka kuya ku-Annual
Kunzima uku Okuqhubekayo Sebenzisa	Ukwakhiwa Kwezohwebo, Uwoyela Negesi, Ezezimayini	Izimo Eziqinile Zokugcina, Isikhathi Eside noma Ukusetshenziswa okuqhubekayo kwangaphandle, wonke amazinga okushisa, izindawo ezingcolile	Njalo ngekota ukuya kuSemi-minyaka yonke

Amalebula
Amalebula omkhiqizo kufanele abe khona futhi afundeke.

Irekhodi Lokuhlola

Irekhodi Lokuhlola
Isibonelo #:                                 Umugqa #:                                Usuku Lokukhiqiza:
UKUHLOLA DATE	UMHLOLI	IMIBONO	PASS/ FAIL	OKULUNGILE KUDINGEKA ISENZO	KWAMUKELWE BY

Izincazelo

Okulandelayo yizincazelo ezijwayelekile zemigomo yokuvikela ukuwa njengoba kuchazwe yi-ANSI Z359.0-2012.

• I-Anchorage: Indawo yokuxhuma evikelekile noma ingxenye enqamulayo yohlelo lokuvikela ukuwa noma isistimu yokuhlenga ekwazi ukusekela ngokuphephile amandla okushayisana asetshenziswa isistimu yokuvikela ukuwa noma isistimu encane ye-anchorage.
• I-Anchorage Connector: Ingxenye noma uhlelo oluncane olusebenza njengesixhumi esibonakalayo phakathi kwe-anchorage nesivikelo sokuwa, ukuma komsebenzi, ukufinyelela kwezintambo noma uhlelo lokuhlenga ngenjongo yokuhlanganisa uhlelo nendawo yokubambelela.
• Ibanga Lokuboshwa: Isamba sebanga eliqondile elidingekayo ukuze kuboshwe ukuwa. Ibanga lokuboshwa lihlanganisa ibanga lokuhlehlisa nebanga lokuvula.
• Umuntu Ogunyaziwe: Umuntu ojutshwe umqashi ukuthi enze imisebenzi endaweni lapho umuntu ezochayeka khona engozini yokuwa.
• Imvume Etholakalayo: Ibanga elisuka endaweni eyireferensi, njengeplathifomu yokusebenza, ukuya esivimbelweni esiseduze umuntu ogunyaziwe angase asithinte ngesikhathi sokuwa, okuthi, uma kushaywa, kubangele ukulimala.
• Umthamo: Isisindo esiphezulu ingxenye, isistimu noma isistimu engaphansi eklanyelwe ukubamba.
• Isitifiketi: Isenzo sokufakazela ngokubhala ukuthi imibandela esungulwe yilawa mazinga noma elinye izinga elibekiwe ifinyelelwe.
• I-Anchorage Eqinisekisiwe: I-anchorage yokuboshwa kokuwa, ukubeka, ukuzibamba noma izinhlelo zokuhlenga umuntu oqeqeshiwe aziqinisekisayo ukuthi ziyakwazi ukusekela amandla okuwa okungenzeka ahlangabezane nawo ngesikhathi sokuwa.
• Ukususwa: Ibanga elisuka endaweni eyinkomba ethile, njengeplathifomu yokusebenza noma i-anchorage yesistimu yokuboshwa kokuwa, ukuya ezingeni eliphansi isisebenzi esingase sibhekane nalo ngesikhathi sokuwa.
• Isidingo Sokusulwa: Ibanga elingaphansi komuntu ogunyaziwe okufanele lihlale lingenazithiyo ukuze kuqinisekiswe ukuthi umuntu ogunyaziwe akaxhumani nanoma yiziphi izinto ezingadala ukulimala uma kwenzeka kuwa.
• Umuntu Onekhono: Umuntu oqokwe umqashi ukuthi abhekelele ukugada, ukuqaliswa kanye nokuqapha ngokushesha uhlelo lokuvikela ukuwa komqashi okuthi, ngokuqeqeshwa nolwazi, akwazi ukuhlonza, ukuhlola nokubhekana nezingozi ezikhona nezingenzeka zokuwa, futhi ngubani unegunya lomqashi lokuthatha izinyathelo zokulungisa ngokushesha maqondana nalezo zingozi.
• Ingxenye: I-elementi noma ukuhlanganiswa okuhlangene kwezinto ezixhumene okuhloselwe ukwenza umsebenzi owodwa ohlelweni.
• I-Subsystem exhumayo: Ukuhlanganiswa, okuhlanganisa izixhumi ezidingekayo, ezihlanganisa zonke izingxenye, amasistimu angaphansi, noma kokubili, phakathi kwesixhumi seankoge noma i-anchorage nendawo yokunamathisela amahanisi.
• Isixhumi: Ingxenye noma i-elementi esetshenziselwa ukuhlanganisa izingxenye zesistimu.
• Ibanga Lokwehlisa izinga: Ibanga eliqondile phakathi kokunamathiselwe kokuboshwa kokuwa komsebenzisi ekuqaleni kwamandla okubopha ukuwa ngesikhathi sokuwa, futhi ngemva kokuwa okunamathiselwe kokuboshwa kuyama ngokuphelele.
• I-Energy (Shock) Absorber: Ingxenye umsebenzi wayo oyinhloko uwukuqeda amandla kanye nokunciphisa amandla okunciphisa isistimu ewafaka emzimbeni ngesikhathi sokuwa.
• Ukuboshwa Kokuwa: Isenzo noma umcimbi wokumisa ukuwa kwamahhala noma ngokushesha lapho ukuwa kwamahhala okuya phansi kuye kwamiswa.
• Ingozi Yokuwa: Noma iyiphi indawo lapho umuntu evezwa khona ukuwa kwamahhala okungaba khona.
• Ukuwa Kwamahhala: Isenzo sokuwa ngaphambi kokuba uhlelo lokuvikela ukuwa luqale ukusebenzisa amandla ukuze kuboshwe ukuwa.
• Ibanga Lamahhala Lokuwa: Ibanga eliqondile elihanjwe ngesikhathi sokuwa, likalwa kusukela ekuqaleni kokuwa ukusuka endaweni yokusebenza ehambayo ukuya endaweni lapho uhlelo lokuvikela ukuwa luqala ukubopha ukuwa.
• Ukubophela, Umzimba Ogcwele: Usekelo lomzimba oklanyelwe ukuqukatha umzimba nokusabalalisa amandla okubopha ukuwa phezu kwamathanga angaphezulu, i-pelvis, isifuba namahlombe.
• Ulayini Wokuphila Ovundlile: Ingxenye yesistimu engaphansi yomugqa wempilo ovundlile, ohlanganisa ulayini oguquguqukayo onezixhumi noma ezinye izindlela zokuhlanganisa emikhawulweni yomibili ukuze ivikeleke ivundlile phakathi kwama-anchorage amabili noma izixhumi okubambelela kukhondolo.
• I-Horizontal Lifeline Subsystem: Ukuhlanganiswa, okuhlanganisa izixhumi ezidingekayo, ezihlanganisa ingxenye yomugqa wokuphila ovundlile futhi, ngokuzikhethela,: a) Ingxenye emunca amandla noma, b) Ingxenye ye-tensioner line, noma kokubili. Lesi simiso esingaphansi sivamise ukunamathiselwa ekugcineni ngakunye kusixhumi se-anchorage noma i-anchorage. Ama-anchorage okugcina anokuphakama okufanayo.
• I-Lanyard: Ingxenye ehlanganisa intambo enwebekayo, intambo yocingo noma ibhande, ngokuvamile elinesixhumi emaphethelweni ngamunye sokuxhuma esisekelweni somzimba kanye nesibambisi sokuwa, isixhumi samandla, isixhumi okubamba intambo noma i-anchorage.
• I-Lanyard Connecting Subsystem: Ukuhlanganisa, okuhlanganisa izixhumi ezidingekayo, ezakhiwe ngelanyard kuphela, noma i-lanyard kanye nesibambisi samandla.
• I-Personal Fall Arrest System (PFAS): Ukuhlanganiswa kwezingxenye kanye nezinhlelo ezingaphansi ezisetshenziselwa ukubopha umuntu ngokuwa kwamahhala.
• Positioning: Isenzo sokusekela umzimba ngohlelo lokumisa ngenjongo yokusebenza ngezandla ezingenazo izandla.
• I-Positioning Lanyard: I-lanyard esetshenziselwa ukudlulisa amandla ukusuka esisekelweni somzimba kuya ku-anchorage noma isixhumi se-anchorage ohlelweni lokuma.
• Umuntu Ofanelekayo: Umuntu oneziqu ezaziwayo noma isitifiketi sobungcweti futhi onolwazi oluningi, ukuqeqeshwa kanye nesipiliyoni emkhakheni wokuvikela nokuhlenga ekwindla okwazi ukuklama, ukuhlaziya, ukuhlola nokucacisa izinhlelo zokuvikela ukuwa nokuhlenga.
• Idivayisi Yokuzihoxisa (i-SRD): Idivayisi equkethe ulayini wamanxeba wesigubhu ezikhiya ngokuzenzakalelayo ekuqaleni kokuwa ukuze ibophe umsebenzisi, kodwa ekhokhayo futhi ihlehlise ngokuzenzakalelayo esigubhu ngesikhathi sokunyakaza okuvamile komuntu umugqa unamathiselwe.
• I-Snaphook: Isixhumi esinomzimba omise okwehhuku enesango elivamise ukuvaleka noma ilungiselelo elifanayo elingase livulwe ukuze ihhuku yamukele into futhi, lapho ikhululwa, ivala ngokuzenzakalelayo ukuze kugcinwe into.
• I-Swing Fall: Ukunyakaza okufana ne-pendulum okwenzeka phakathi kanye/noma ngemva kokuwa okuqondile. Ukuwa komjiko kuba ngumphumela lapho umuntu ogunyaziwe eqala ukuwa esuka endaweni evundlile kude ne-anchorage engashintshi.

ISITHASISELO A

Ithebula 1B: FT-XTM I-EdgeCoreTM I-Arc Flash Class 2 SRL-P ANSI/OSHA Izibaluli Zokusebenza
Ingxenye #s kanye Nemibandela		Okujwayelekile Ukusebenza ngo-130 kuya ku-310 lbs. (59-141 kg) Umsebenzisi			Okujwayelekile Ukusebenza ngo-130 kuya ku-420 lbs. (59-191 kg) Umsebenzisi			I-ANSI Ukusebenza Izimfuneko 130 kuya ku-310 lbs. (59-141 kg) Umsebenzisi
Ingxenye #	I-Anchorage Isimo	Ukuboshwa Ibanga	Isilinganiso Ukuboshwa Phoqa	Ubuningi Ukuboshwa Phoqa	Ukuboshwa Ibanga	Isilinganiso Ukuboshwa Phoqa	Ubuningi Ukuboshwa Phoqa	Ubuningi Ukuboshwa Ibanga	Isilinganiso Ukuboshwa Phoqa *Kunemibandela	Ubuningi Ukuboshwa Phoqa
Zonke Izingxenye Izinombolo kuThebula 1A	I-Overhead Non-Lead Edge	35” (0.9 m)	906 lbf. (4.0 kN)	1,259 lbf. (5.6 kN)	48” (1.2 m)	746 lbf. (3.3 kN)	1,124 lbf. (5.0 kN)	42” (1.1 m)	1,575 lbf. (7.0 kN)	1,800 lbs. (8 kN)
	I-Leading Edge Condition, 5' Ngezansi kwe-D-Ring	122” (3.1 m)	830 lbf. (3.7 kN)	1,618 lbf. (7.2 kN)	155” (3.9 m)	780 lbf. (3.5 kN)	1,246 lbf. (5.5 kN)	N/A	N/A

Ithebula 1C: 8' FT-XTM I-EdgeCoreTM Izinombolo ze-Arc Flash Replacement SRD Part
Ingxenye #	Isixhumi sokuphela komlenze
5049	N/A; Ithuluzi le-Spanner
84008RP0	Steel Mini Rebar Hook
84008RP1	I-Snap Hook yensimbi
84008RP2	Steel Swivel Snap Hook
I-84008RP3S	Steel Swivel Rebar Hook
84008RD1	I-Dielectric Snap Hook

Amadokhumenti / Izinsiza

I-FALLTECH FT-X EdgeCore Arc Flash Class 2 Leading Edge SRL-P [pdf] Incwadi Yeziqondiso I-MSRD33 Rev A 120423, FT-X EdgeCore Arc Flash Class 2 Leading Edge SRL-P, FT-X Arc Flash, EdgeCore Arc Flash, Arc Flash Class 2 Leading Edge SRL-P, Arc Flash, Class 2 Leading Edge SRL-P, Isigaba 2 somphetho oholayo, unqenqema oluholayo, unqenqema oluholayo SRL-P, SRL-P

Izithenjwa

• Imaniwali yosebenzisayo