I-EPH ILAWULA I-RFCV2 Cylinder Thermostat enenkinobho ye-Boost

Ulwazi Lomkhiqizo

Imininingwane Yomkhiqizo

• Ukunikezwa kwamandla kagesi: 2 x AAA Amabhethri ane-alikhali
• Ukusetshenziswa kwamandla: 50 Ine
• Ukushintshwa kwebhethri: Kanye ngonyaka
• Ubukhulu: 80 x 80 x 25.7mm

Ulwazi Lomkhiqizo

I-RFCV2 RF Cylinder Thermostat enenkinobho ye-Boost yakhelwe ukulawula izinga lokushisa lesilinda ngokwenza kusebenze isidingo sokushisa ngokusekelwe kuzinga lokushisa eliqondiwe elikhethwe umsebenzisi. Isebenza ngamabhethri e-AAA amabili futhi inikeza izici ezihlukahlukene ezifana nomsebenzi we-boost kanye nokukhiya ikhiphedi ukuze kusetshenziswe okuthuthukisiwe.

Imiyalo Yokusebenzisa Umkhiqizo

Imiyalelo yokufaka:

1. Susa i-thermostat ephaketheni layo.
2. Khetha indawo efanelekile yokukhweza ukuze uqinisekise ukukalwa okunembile kwezinga lokushisa.
3. Faka amabhethri e-AAA anikeziwe bese uxhuma inzwa yezinga lokushisa.
4. Lungisa i-base plate odongeni usebenzisa izikulufu ezinikeziwe.
5. Namathisela indlu yangaphambili ku-base plate.

Imiyalo yokusebenza:

• Lungisa izinga lokushisa eliqondiwe ngokushintsha ukudayela kuye kwewashi noma ngokumelene newashi.
• Yenza kusebenze umsebenzi we-boost wokwenyuka kokushisa kwesikhashana.
• Khiya ikhiphedi ukuze uvimbele izinguquko ezingagunyaziwe.
• Gada izinga lokushisa lamanje lesilinda esikrinini.

FAQ

• Q: Kufanele ngibuyisele kangaki amabhethri?
  • A: Amabhethri kufanele ashintshwe kanye ngonyaka ukuze kuqinisekiswe ukusebenza kahle kwe-thermostat.
• Q: Ngingayinqamula kanjani i-RFCV2 kwamanye amadivaysi?
  • A: Landela imiyalelo enikezwe kumanuwali ukuze unqamule i-thermostat ku-R_7-RFV2 noma ku-UFH10-RF.

Izilungiselelo ezizenzakalelayo zefekthri

Izilungiselelo ezizenzakalelayo zefekthri

• Inkomba yezinga lokushisa: °C
• I-Hysteresis: 5°C
• Ukuvala ikhiphedi: Valiwe

Imininingwane

• Ukunikezwa kwamandla kagesi: 2 x AAA Amabhethri ane-alikhali
• Ukusetshenziswa kwamandla: 50 Ine
• Ukushintshwa kwebhethri: Kanye ngonyaka
• Temp. lawula ububanzi: 10 …90°C
• Ubukhulu: 80 x 80 x 25.7mm
• Inzwa yezinga lokushisa: I-NTC 10K Ohm @ 25°C
• Ubude benzwa yangaphandle: 1950mm ± 80mm
• Inkomba yezinga lokushisa: °C
• Ukushintsha umehluko: Ilungiseka 0.0 … 10°C

Qaphela: Amabhethri ekhwalithi enhle abalulekile ukuze kuqinisekiswe ukusebenza kahle kwalo mkhiqizo. I-EPH incoma ukusebenzisa i-Duracell noma amabhethri e-Energiser.

I-RFCV2 Cylinder Thermostat iyasebenza

Isebenza kanjani i-RFCV2 Cylinder Thermostat

• Uma i-thermostat ye-RFCV2 ibiza ukushisa, izosebenza ngokuvumelana nezinga lokushisa eliqondiwe elikhethwe umsebenzisi.
• Izinga lokushisa okuqondisiwe lichazwa ngokuphendula ukudayela ngokwewashi ukuze uthole izinga lokushisa eliphezulu eliqondiwe noma ngokumelene newashi ukuze uthole izinga lokushisa eliphansi eliqondiwe.
• Uma izinga lokushisa lesilinda lingaphansi kwezinga lokushisa eliqondiwe khona-ke i-thermostat izovula isidingo sokushisa.
• Lokhu kuzokhonjiswa ngophawu lomlilo esikrinini.
• Uma izinga lokushisa elifiselekayo selifinyelelwe, i-thermostat izoyeka ukufuna ukushisa, futhi uphawu lwe-ame luzonyamalala esikrinini.
• Isikrini sizohlala sibonisa izinga lokushisa lamanje lesilinda.

Ukukhweza & Ukufakwa

Isexwayiso!

• Ukufakwa nokuxhuma kufanele kwenziwe kuphela umuntu oqeqeshiwe.
• Osebenza ngogesi abaqeqeshiwe kuphela noma abasebenzi besevisi abagunyaziwe abavunyelwe ukuvula umhleli.
• Uma i-thermostat noma umklami kusetshenziswa ngendlela engacaciswanga ngumkhiqizi, ukuphepha kwazo kungase kuthikameze.
• Ngaphambi kokusetha i-thermostat, kuyadingeka ukuqedela zonke izilungiselelo ezidingekayo ezichazwe kulesi sigaba.

Le thermostat ingafakwa ngalezi zindlela ezilandelayo:

1. Ebhokisini le-conduit ehlehlisiwe
2. Ebhokisini elibekwe phezulu
3. Ifakwe ngqo odongeni

Ukukhweza & Ukufakwa

1. Susa i-thermostat ephaketheni layo.
2. Khetha indawo yokukhweza ukuze i-thermostat ikwazi ukukala izinga lokushisa ngokunembe ngangokunokwenzeka.
   • Khetha indawo yokukhweza yokuhlola izinga lokushisa ngokwemiyalelo esekhasini lesi-8.
   • Vimbela ukuchayeka elangeni noma eminye imithombo yokushisisa / yokupholisa.
3. Cindezela futhi ubambe inkinobho yokukhulula phansi kwe-thermostat ukuze ukhiphe indlu yangaphambili ku-base plate.
4. Faka amabhethri angu-2 x AAA anikeziwe futhi i-thermostat izovula.
5. Xhuma inzwa yezinga lokushisa kusixhumi ku-PCB.
6. Lungisa i-base plate ngqo odongeni ngezikulufo ezinikeziwe. Kunamathiselwe indlu yangaphambili ku-base plate.

Ukukhwezwa Kwenzwa Yezinga Lokushisa

Isilinda

Ubuso

• Inzwa yokushisa kufanele ifakwe ngaphansi kwe-1/3 yesilinda.
• Khipha ingxenye ye-insulation kusilinda ukuze uveze indawo yethusi.
• Namathisela inzwa yokushisa ebusweni besilinda usebenzisa itheyiphu ye-foil enikeziwe.

I-Cylinder Pocket

• Faka inzwa yokushisa ephaketheni elifanele kusilinda. Vikela inzwa yokushisa ephaketheni usebenzisa itheyiphu ye-foil enikeziwe.

Ipayipi

Igumbi Eliseduze

• Susa noma yikuphi ukufakwa kwamapayipi ukuze uveze ipayipi.
• Namathisela inzwa yokushisa ebusweni bepayipi usebenzisa i-foil tape enikeziwe.
• Faka inzwa ye-NTC yezindlu ngamamitha angu-1.5 ngaphezu kwezinga lesitezi.
• Qinisekisa ukuthi inzwa yezinga lokushisa ivikelwe ngokuqinile ku-NTC sensor housing.

Qaphela:

• Izindlu zezinzwa ze-NTC zingathengwa njengesisetshenziswa kusuka kuzilawuli ze-EPH.
• Ikhodi yomkhiqizo: NTC-Housing

Imiyalelo yokusebenza

Incazelo yophawu lwe-LCD

Incazelo Yenkinobho

Ukushintsha Amabhethri

• Cindezela bese ubamba ngaphansi kwe-thermostat, ngenkathi ubambe donsa kusuka phansi ukuze uhlukanise izindlu zangaphambili kusuka ku-baseplate.
• Faka amabhethri angu-2 x AAA futhi i-thermostat izovula.
• Namathisela kabusha izindlu zangaphambili ku-baseplate.

Isexwayiso Esiphansi Ibhethri

• Lapho amabhethri cishe engenalutho, i- uphawu luzovela esikrinini. Manje amabhethri kufanele ashintshwe noma iyunithi izocisha.

Khulisa Umsebenzi

• I-thermostat ingakhuliswa imizuzu engama-30, 1, 2 noma 3 amahora.
• Cindezela 1, 2, 3 noma 4 izikhathi, ukusebenzisa isikhathi esifiselekayo sokukhulisa.
• Ukuze ukhansele i-boost, cindezela futhi.

Ukukhiya Ikhiphedi

• Ukukhiya i-thermostat, cindezela bese ubamba imizuzwana emi-10. izovela esikrinini. Izinkinobho manje zikhutshaziwe.
• Ukuvula i-thermostat, cindezela bese ubamba imizuzwana emi-10. izonyamalala esikrinini. Izinkinobho manje sezinikwe amandla.

Ukulungisa Izinga Lokushisa Okuqondisiwe

• Zungezisa ngokwewashi ukuze kwenyuswe izinga lokushisa eliqondiwe.
• Cindezela noma linda imizuzwana emi-5. Izinga lokushisa okuqondiwe manje lilondoloziwe.
• Zungezisa ngokumelene nokuhamba kwewashi ukuze wehlise izinga lokushisa eliqondiwe.
• Cindezela noma linda imizuzwana emi-5. Izinga lokushisa okuqondiwe manje lilondoloziwe.

Ukuze uxhume i-RFCV2 ku-R_7-RFV2

Ku-R_7-RFV2:

• Cindezela okuthi MENU, 'P01 rF COn' izovela esikrinini.
• Cindezela okuthi KULUNGILE, 'RF CONNECT' izovela iqinile esikrinini.

Ku-RFCV2:

• Khipha ikhava yangemuva bese ucindezela inkinobho ye-RF ku-PCB.

Ku-R_7-RFV2:

• Uma 'IZONE' ikhanya, cindezela Khetha endaweni oyifunayo.

Ku-RFCV2:

• Uma u-'r01' evela, cindezela inkinobho ukuze uqinisekise ukuthi i-thermostat ixhunyiwe.

Ku-R_7-RFV2:

• Faka i-thermostat elandelayo kumodi yokumatanisa noma cindezela KULUNGILE ukuze ubuyele esikrinini esikhulu.

Qaphela

• Uma ubhanqa izindawo ezengeziwe ku-R_7-RFV2, 'r02' , 'r03', 'r04' zingavela kusikrini se-thermostat.

Ukuxhuma i-RFCV2 ku-UFH10-RF

Ku-UFH10-RF:

• Cindezela okuthi MENU , 'P01 rF COn' izovela esikrinini.
• Cindezela , 'RF CONNECT' izovela iqinile esikrinini.
• Zungezisa ukuze ukhethe indawo ongathanda ukuxhuma kuyo.
• Cindezela ukuqinisekisa. Indawo izoyeka ukukhanya futhi ibonakale iqinile.

Ku-RFCV2:

• Khipha ikhava yangemuva bese ucindezela inkinobho ye-RF ku-PCB.
• Uma u-'r01' evela, cindezela inkinobho ukuze uqinisekise ukuthi i-thermostat ixhunyiwe.

Ku-UFH10-RF:

• Zungezisa ukuze ukhethe enye indawo ongathanda ukuxhuma kuyo noma cindezela u-MENU ' ukuze ubuyele kumenyu.

Qaphela

• Uma ubhanqa izindawo ezengeziwe ku-UFH10-RF, 'r02' , 'r03', 'r04' …'r10' ingavela kusikrini se-thermostat.

Ukunqamula i-RFCV2 kukho kokubili i-R_7-RFV2 noma i-UFH10-RF

Ku-RFCV2:

1. Hlukanisa indlu yangaphambili ye-thermostat ku-baseplate ngokucindezela inkinobho ngaphansi kwe-thermostat bese udonsa indlu yangaphambili kude ne-baseplate.
2. Cindezela inkinobho ye-RF kanye kwi-PCB. 'nOE' izovela esikrinini ilandelwe ngu-'- – -'.
3. Cindezela bese ubamba inkinobho ye-RF futhi imizuzwana eyi-10 kuze kuvele u-'Adr' esikrinini.
4. Cindezela inkinobho kabili ukuze uqinisekise.
   • I-thermostat manje inqanyuliwe ku-.

Qaphela

• Ama-thermostat nawo anganqanyulwa ku-R_7-RFV2 noma ku-UFH10-RF.
• Sicela ubheke umhlahlandlela wokusebenza we-R_7-RFV2 noma we-UFH10-RF ukuze uthole imininingwane.

Umsebenzi Wemenyu

Le menyu ivumela umsebenzisi ukuthi alungise imisebenzi eyengeziwe.

• P0 1: Ukusetha imikhawulo Ephezulu Nephansi
• P0 2: I-Hysteresis HOn & HOFF
• P0 3: Ukulinganisa
• P0 4: Isetha kabusha i-Thermostat

P0 1 Ukusetha imikhawulo ephezulu nephansi Sawubona 90°C Lo 10°C

Le menyu ivumela isifaki ukuthi siguqule amazinga okushisa amancane naphezulu i-thermostat engasebenza phakathi kwawo.

• Ukufinyelela lesi silungiselelo cindezela ubambe futhi ndawonye imizuzwana emi-5.
• 'P01 + HILO' izovela esikrinini. Cindezela ukukhetha.
• 'LIM + OFF' izovela esikrinini.
• Zungezisa ukuze ukhethe 'VULIWE', cindezela ukuqinisekisa.
• I-'HI + LIM' izovela esikrinini futhi izinga lokushisa lizoqala ukukhanya. Zungezisa ukusetha umkhawulo ophezulu we-thermostat.
• Cindezela ukuqinisekisa.
• I-'LO + LIM' izovela esikrinini futhi izinga lokushisa lizoqala ukukhanya.
• Zungezisa ukusetha umkhawulo ophansi we-thermostat.
• Cindezela ukuqinisekisa.
• Izilungiselelo zizolondolozwa futhi umsebenzisi uzobuyiselwa esikrinini sangaphambilini.
• Cindezela ukuze ubuyele ekusebenzeni okuvamile. Uma imikhawulo isethiwe ku-thermostat igama elithi 'LIM' lizoboniswa esikrinini unomphela.

I-P0 2 I-Hysteresis HON 5°C HOFF 0.0°C

Le menyu ivumela isifaki ukuthi siguqule i-hysteresis ye-thermostat lapho izinga lokushisa likhuphuka futhi lehla. Uma i-HOn isethelwe ku-5°C, lokhu kuzovumela ukwehla kwezinga lokushisa ngo-5°C ngaphansi kwezinga lokushisa eliqondiwe, ngaphambi kokuba i-thermostat ivule futhi. Uma i-HOFF isethelwe ku-0.0°C, lokhu kuzovumela izinga lokushisa ukuthi likhuphuke ngo-0°C ngaphezu kwezinga lokushisa eliqondiwe ngaphambi kokuba i-thermostat ivale. Ukufinyelela lesi silungiselelo cindezela ubambe & ndawonye imizuzwana emi-5. I-'P01' izovela esikrinini.

• Zungezisa ngokwewashi kuze kuvele 'P02 & HOn' esikrinini.
• Cindezela ukukhetha. Sebenzisa ukuze ukhethe izinga lokushisa le-'HOn'.
• Cindezela ukuqinisekisa. 'HOFF' ivela esikrinini. Sebenzisa ukuze ukhethe izinga lokushisa le-'HOFF', cindezela ukuqinisekisa. Izilungiselelo zizolondolozwa futhi umsebenzisi uzobuyiselwa esikrinini sangaphambilini.
• Cindezela ukuze ubuyele ekusebenzeni okuvamile.

P0 3 Ukulinganisa

• Le menyu ivumela isifaki ukuthi silinganise izinga lokushisa le-thermostat.
• Ukufinyelela lesi silungiselelo cindezela ubambe futhi ndawonye imizuzwana emi-5.
• I-'P01' izovela esikrinini.
• Zungezisa ngokwewashi kuze kuvele 'P03 & CAL' esikrinini.
• Cindezela ukukhetha.
• Izinga lokushisa langempela lamanje lizovela esikrinini.
• Zungezisa ngokwewashi noma ngokumelene newashi ukuze ulinganise izinga lokushisa.
• Cindezela ukuqinisekisa izinga lokushisa.
• Izinga lokushisa lamanje lizolondolozwa futhi umsebenzisi uzobuyiselwa esikrinini sangaphambilini.
• Cindezela ukuze ubuyele ekusebenzeni okuvamile.

P0 4 – Ukusetha kabusha i-Thermostat

• Le menyu ivumela umsebenzisi ukuthi asethe kabusha i-thermostat ibe izilungiselelo zasembonini. Ukuze ufinyelele lesi silungiselelo, cindezela bese ubamba futhi ndawonye imizuzwana emi-5.
• I-P01' izovela esikrinini
• Zungezisa kuze kuvele 'P04 & rSt' esikrinini.
• Cindezela ukuqinisekisa.
• I-'rSt' izovela esikrinini i-'nO' izokhanya.
• Zungezisa ngokwewashi.
• I-'rSt' izosala futhi 'YEBO' izokhanya esikrinini.
• Cindezela ukuqinisekisa.
• I-thermostat izoqala kabusha futhi ibuyele kuzilungiselelo zayo ezichazwe njengasekuqaleni.

Qaphela:

• I-thermostat ingase futhi isethwe kabusha okuyinhloko ngokusebenzisa inkinobho yokusetha kabusha etholakala ku-PCB ngaphakathi kwe-thermostat.
• Cindezela bese ulandela imiyalelo engenhla.

Oxhumana nabo

I-EPH Ilawula i-IE

• technical@ephcontrols.com
• www.ephcontrols.com/contact-us
• +353 21 471 8440
• I-Cork, T12 W665

Skena

I-EPH Ilawula i-UK

• technical@ephcontrols.co.uk
• www.ephcontrols.co.uk/contact-us
• +44 1933 322 072
• I-Harrow, i-HA1 1BD

Skena

© 2024 EPH Controls Ltd.
2024-06-05_RFC-V2_DS_PK

Amadokhumenti / Izinsiza

I-EPH ILAWULA I-RFCV2 Cylinder Thermostat enenkinobho ye-Boost [pdf] Incwadi Yeziqondiso I-RFCV2 Cylinder Thermostat ene-Boost Button, i-RFCV2, i-Cylinder Thermostat ene-Boost Button, i-Thermostat ene-Boost Button, Inkinobho Yokuthuthukisa, Inkinobho

Izithenjwa

• Imaniwali yosebenzisayo