I-EPEVER EPIPDB-COM-10 Isilawuli Seshaja Yebhethri Ekabili ye-PWM

Ukubukeka

ISEXWAYISO

Ungasifaki isilawuli endaweni eswakeme, emfuthweni kasawoti, ekugqwaleni, enamafutha, evutha umlilo, eqhumayo, enqwabelana uthuli, noma kwezinye izindawo ezinzima.

(Qaphela: connect the components as the 1-6)

Isithonjana	Umsebenzi
	Xhuma ngebhethri #1.
	Xhuma ngebhethri #2.
	Xhuma ne-PV yamalungu afanayo.
Remote temp. sensor (Optional)	Remotely measure the battery temperature to regulate the battery voltage.
Izinga lokushisa lasendaweni. inzwa	Measure ambient temperature.
Okwebhethri 1	Indicate battery #1 charging status and error.
Okwebhethri 2	Indicate battery #2 charging status and error.
Ukuxhumeka kwemitha yesilawuli kude	Xhuma ngemitha eyirimothi.

Qaphela: No RTS; the controller measures ambient temperature by the local temp. sensor. While the controller will obtain data from the RTS automatically after the RTS is connected.

EPIPDB-COM series are common-negative controllers. Negative terminals of the PV array and batteries can be grounded simultaneously, or any negative terminal is grounded. According to the practical application, the negative terminals of the PV array and batteries can also be ungrounded.

However, the grounding terminal on the controller shell must be grounded.

It can shield electromagnetic interference and avoid electric shock to the human body.

ISEXWAYISO

Ukusebenzisa isilawuli esivamile-negative kumasistimu avamile-negative, njengesistimu ye-RV, kuyanconywa. Isilawuli singase sonakaliswe uma kusetshenziswa isilawuli se-common-positive futhi i-electrode enhle isekelwe ohlelweni oluvamile-negative.

Ukusetha Imodi

uhlobo lwebhethri	imodi
charging priority
charging frequence

Three LEDs flash, and each LED indicates different specifications. Choose the LED according to the following information, and then press the button for 5 seconds until the number flashes. And then, choose one number you need and leave it, and the number will be saved.

1. 1st LED is for the battery type setting.
   

   1st I-LED	Uhlobo lwebhethri
   1	Ibhethri elivaliwe
   2	Ibhethri yejeli
   3	Ibhethri elichichimayo

2. 2nd LED is for the charging priority setting. Set the percentage for battery #1, and the controller will automatically calculate the rest percentagi-e yebhethri #2.
   

   2nd I-LED	Ibhethri #1 charging percentage	Battery # 2 Amaphesenti wokushajatage
   0	0%	100%
   1	10%	90%
   2	20%	80%
   3	30%	70%
   4	40%	60%
   5	50%	50%
   6	60%	40%
   7	70%	30%
   8	80%	20%
   9	90%(kusethwe ngaphambilini)	10%

   Qaphela: During the normal charging process, the controller charges the battery per the set percentage. Uma ibhethri elilodwa lishajwe ngokugcwele (njengebhethri #1), ukushajwa okuningi kwamanje kuzophambukiselwa kwelinye ibhethri (ibhethri #2). Isilawuli sibuyela ngokuzenzakalela kumaphesenti esethingitage uma ibhethri #1 inevolumu ephansitage.
   When the controller detects only one battery, all the charging current will go to this battery automatically.

3. 3rd LED is for the charging frequency setting.
   

   3rd I-LED	Imvamisa yokushaja ye-PWM
   0	25Hz(kusethwe ngaphambilini)
   1	50Hz
   2	100Hz

Ukuxazulula inkinga

Cha.	Isimo se-LED	Ukuxazulula inkinga
1	Ukucwayiza kwe-LED	Short circuit. Please check whether the PV and battery connection is correct.
2	LED slowly flashing	Ishajwe ngokugcwele
3	I-LED ivuliwe	Iyashaja
4	LED frequent flashing	Akukho ukushajwa nanoma yiliphi ibhethri elitholiwe.
5	I-LED IVALIWE	Alikho ibhethri noma isistimu engaphezu kwevolumutage.

Ulwazi Lobuchwepheshe

Imodeli	EPIPDB-COM-10	EPIPDB-COM-20
Uhlelo lokuqamba voltage	12 / 24VDC Okuzenzakalelayo
Isilinganiso senkokhelo yamanje	10A	20A
Uhlobo Lwebhethri	Kuvaliwe; Ijeli; Izikhukhula
Linganisa umthamo wokushajatage	Kuvalwe: 14.6V; Gel: Cha; Izikhukhula: 14.8V
Khulisa ukushaja voltage	Kuvaliwe: 14.4V; Ijeli: 14.2V; Izikhukhula: 14.6V
Ukushaja okuntantayo voltage	Ivalwe/Ijeli/Izikhukhula: 13.8V
Umthamo omkhulu welangatage	30V(12V System); 55V(24V System)
Ibhethri voltagibanga	8 ~ 15V
Khulisa isikhathi	120 imizuzu
Ukuzidla	4mA ebusuku; 10mA lapho ishaja
Imbobo yokuxhumana	8-PIN RJ-45
Temp. isinxephezelo	-5mV / ℃ / 2V
Amatheminali	4 mm2
Izinga lokushisa kwemvelo	-35℃ ~ +55℃
Isisindo sengqikithi	250g

Note: The above parameters are measured in the condition of a 12V system. Please double the values in the 24V system.

Ukudweba Kwemishini

Inombolo Yenguqulo: V3.1

Ukwesekwa Kwamakhasimende

I-HUIZHOU EPEVER TECHNOLOGY CO., LTD.
Ucingo: +86-752-3889706
I-imeyili: info@epever.com
Webindawo: www.epever.com

Amadokhumenti / Izinsiza

I-EPEVER EPIPDB-COM-10 Isilawuli Seshaja Yebhethri Ekabili ye-PWM [pdf] Imaniwali yosebenzisayo EPIPDB-COM-10, EPIPDB-COM-20, EPIPDB-COM-10 Dual Battery PWM Charge Controller, EPIPDB-COM-10, Dual Battery PWM Charge Controller, Battery PWM Charge Controller, PWM Charge Controller, Charge Controller

Izithenjwa

• Imaniwali yosebenzisayo