ENTTEC 73539 DIN PIXIE

Ulwazi Lomkhiqizo

Imininingwane:

• Umhlahlandlela Wokudala Wephrothokholi
• Compatible with ENTTEC pixel controllers: DIN PIXIE, PIXELATOR MINI, PIXELATOR MINI MK2, OCTO MK2, OCTO MK3
• Firmware Version Requirements: V1.0 or above for some models, V2.0 or above for others, V4.0 or above for OCTO MK2

Imiyalo yokusetshenziswa komkhiqizo

Isingeniso:
ENTTEC Pixel controllers support over 20 default pixel protocols. The custom protocol feature allows users to create a custom protocol for pixel fixtures not covered by default protocols without the need for new firmware.

Izidingo Zokusetha:

• Datasheet of the desired pixel fixture
• Computer to access the device settings page
• For ENTTEC Ethernet Controller: Device IP address (DHCP or static)
• For DIN PIXIE: EMU Software for configuration

Guide to Custom Protocol Creation:

1. Verify datasheet for compatible pixel protocol
2. Navigate to the Device’s User Interface to enablethe  custom protocol feature
3. Adjustthe  pixel fixture’s data voltage timing viathe  web interface based othe n datasheet

Step 1: Verify Datasheet for Compatible Protocol

1. Check the data transmission method from the datasheet
2. Identify data transmission method (e.g., D1-D2-D3…Dn or C1-C2-D1-D2…Dn)
3. Choose a supported protocol with a similar data transmission method

I-FIRMWARE EFANAYO

Ukudalwa kwephrothokholi yangokwezifiso kufakwe kuzilawuli zamaphikseli ze-ENTTEC ezilandelayo:

I-SKU	Umkhiqizo	I-Firmware Version
73539	I-DIN PIXIE	V2.0 noma ngaphezulu
70067	I-PIXELATOR MINI	V2.0 noma ngaphezulu
70068	I-PIXELATOR MINI MK2	V1.0 noma ngaphezulu
71521	I-OCTO MK2	V4.0 noma ngaphezulu
71522	I-OCTO MK3	V1.0 noma ngaphezulu

ISINGENISO

• ENTTEC Pixel controllers support more than 20 pixel protocols by default. In the event of missing protocol, this custom feature allows users to create a custom protocol for the desired pixel fixture anytime without having to submit a support request for new firmware.
• Lesi sici sivumela abasebenzisi ukuthi balungise ivolumutagIsikhathi esisuselwe kumaphrothokholi asekelwayo uma indlela yokudlulisela idatha ifana nanoma iyiphi iphrothokholi yethu esekelwayo.
• Lo mbhalo unikeza imiyalelo yokusetha yokudala iphrothokholi yephikseli yangokwezifiso kanye nokuqinisekisa indlela yokunquma.

IZIDINGO ZOKUSETHA

Okulandelayo kuyadingeka ukuze udale iphrothokholi yangokwezifiso:

1. Ishidi le-data: Obtain the datasheet of the desired pixel fixture to gather necessary information. Contact the dealer or manufacturer for this document.
2. Idivayisi: Use a computer to access the device settings page.
3. For the TEC Ethernet Controller: Obtain the device IP address, which can be either DHCP or static, based on your network settings. Discover the IP using the ENTTEC EMU app.
4. For DIN PIXIE: Use the EMU Software for configuration.

UMHLAHLANDLELA WOKUDALWA KWEPROTOCOL OKUNGEZIFISO

Lesi sici sivumela abasebenzisi ukuthi balungise umthamo wedathatage timing to meet specific protocol needs. To create a custom protocol:

1. Qinisekisa idatha yephrothokholi ye-pixel ehambisanayo.
2. Zulazulela ku-User Interface Yedivayisi ukuze unike amandla isici sephrothokholi yangokwezifiso.
3. Lungisa umthamo wedatha ye-pixel fixturetage isikhathi nge web isikhombimsebenzisi njengokusho kwemininingwane yedatha yomkhiqizi.

Isinyathelo 1: Qinisekisa idatha yedatha yephrothokholi ehambisanayo

1. Qinisekisa indlela yokudlulisa idatha yephrothokholi oyifunayo kudathabhethi.
   1. The data transmission method implies how the data is forwarded. Below are demonstrated the common data transmission methods:
      • Indlela ejwayeleke kakhulu idlulisa idatha ngaphandle kwezingcezu ezengeziwe (isb, D1-D2-D3…Dn).
        Example: Imininingwane ethathwe kumininingwane ye-WB2812B

        

      • Amanye amaphrothokholi, njenge-TM1814, afaka idatha eyengeziwe ngaphambili (isb, C1-C2-D1-D2…Dn).
        ExampLe: Imininingwane ethathwe kudatha yedatha ye-TM1814

        
2. Khetha iphrothokholi efanayo esekelwa idivayisi (noma khetha kokungenhlaample) that shares the same data transmission method as your desired pixel protocol.
3. Qhubekela esinyathelweni sesi-2 ukuze uthole ukucushwa okwengeziwe.

Step 2: Navigate to the Device’s Settings page to enable the custom protocol feature
In this step, the OCTO/PIXELATOR MINI Series and Din PIXIE are guided accordingly due to their distinct interfaces.
For ENTTEC Ethernet Controllers (OCTO/PIXELATOR MINI Series)

1. Access to the OCTO/PIXELATOR MINI web esibonakalayo
   1. I-Google Chrome iphakanyiswe njenge web browser to access the OCTO/PIXELATOR MINI’s web esibonakalayo.
   2. Free ENTTEC app, EMU can be used to discover OCTO/PIXELATOR MINI’s IP address. See the ENTTEC webindawo www.enttec.com ukulanda uhlelo lokusebenza.
   3. After entering the IP address of OCTO/PIXELATOR MINI, the user will land on the Home page of OCTO/PIXELATOR MINI’s User Interface.

      
      Example of the OCTO homepage in Figure 1 indicates IP address 10.10.3.31, which was assigned by the DHCP server. For the out-of-box OCTO/PIXELATOR MINI that is connected directly to a computer (no DHCP server), the default IP address is 192.168.0.10.
      See OCTO/PIXELATOR MINI User Manual ‘Networking’ section for more information.
2. Navigate to the Settings page – Output Setting.
   Iya kokuphumayo lapho i-pixel fixture oyithandayo ixhunywe kukho. Khetha iphrothokholi ye-pixel ohlwini lokudonsela phansi olwabelana ngendlela efanayo yokudlulisela eqinisekiswe kusinyathelo soku-1.

   

3. Enable Custom protocol (Continue to Step 3)
   Nika amandla ibhokisi lokumaka elithi 'Ngokwezifiso' ukuze ufinyelele umthamo wedathatagukusethwa kwesikhathi. Susa uqhwishi ukuze ukhubaze iphrothokholi yangokwezifiso.

   

Okwe-DIN PIXIE

1. Xhuma i-DIN PIXIE kukhompuyutha usebenzisa i-USB Type-B.
2. Yethula i-EMU Software.
3. Skena idivayisi bese uchofoza ku-Conf ye-DIN PIXIE etholakele.

   

4. Enable Custom Protocol (Continue to Step 3)
   Pick a pixel protocol from the dropdown list that shares the same transmission method verified in tp,1, and enable Custom.

   

Isinyathelo sesi-3: Setha ivolumu yangokwezifisotage isikhathi

1. Qondanisa ivolumutagisikhathi kudatha yephrothokholi oyifunayo. I-Custom Protocol idinga okokufaka okungu-4 ukuze kuqedelwe umthamo wedathatagukulungiswa kwesikhathi:
   

   Voltage Timing Definition
   I-Bit 0 High Time (T0H)	IVoltagisikhathi esiphezulu esidingekayo sekhodi 0.
   I-Bit 1 High Time (T1H)	IVoltagisikhathi esiphezulu esidingekayo sekhodi 1.
   Overall Bit Time:	Ingqikithi yevolumutage time for a single bit. Lower limit = T0H+T0L Upper limit = T1H+T1L
   Setha kabusha Isikhathi	Ingqikithi yevolumutagisikhathi esiphansi esidingekayo ukuze usethe kabusha ukudluliswa kwedatha phakathi kweqoqo ngalinye ledatha.

   

2. I-Datasheet - Idatha voltagimininingwane yesikhathi Example
   Idatha ye-WB2818B
   • Locate the ‘Sequence Time’ table in WB2818B’s datasheet for the voltagibanga lesikhathi e.
   • Gcwalisa ivolumutagIbanga lesikhathi kunkambu yangokwezifiso kokuthi Izilungiselelo Zokukhiphayo.

     

KUBALULEKILE

• ENTTEC recommends taking the median value of the range for the start.
• Umsebenzisi kuzodingeka AGCINE izilungiselelo ukuze inani elishintshiwe lisebenze.
• Fine adjustment of value required, followed by actual output test to optimise custom protocol for pixel fixture control.
• ENTTEC recommends a trial run on the actual setup before finalising the custom protocol setup.
• Typical issues of incorrect setup include, including and not limited to, failure to light up and output flickering.

ISIPHETHO

• Lo mhlahlandlela ubonise indlela yokusetha iphrothokholi yangokwezifiso yamadivayisi afanelekayo e-ENTTEC futhi unikeze ulwazi lobuchwepheshe ekuqinisekiseni idatha yemininingwane ye-pixel oyithandayo.
• Ngokulandela lezi zinyathelo, abasebenzisi bangakha iphrothokholi ye-pixel yangokwezifiso engatholakali ohlwini lokudonsela phansi ngaphandle kokulinda usekelo lobuchwepheshe noma ukukhishwa okusha kwe-firmware. Uma unemibuzo noma ubunzima bokuthola ulwazi olulungile, xhumana nethimba lethu labasekeli elinobungani emahhovisi endawo.

FAQ

How do I access the device settings page on my computer?

You can access the device settings page by connecting your computer to the device's network and entering the IP address in a web isiphequluli.

Can I create a custom protocol without the datasheet?

It is recommended to have the datasheet to ensure accurate customization of the protocol based on the pixel fixture's specifications.

Amadokhumenti / Izinsiza

ENTTEC 73539 DIN PIXIE [pdf] Incwadi Yeziqondiso DIN PIXIE, PIXELATOR MINI, PIXELATOR MINI MK2, OCTO MK2, OCTO MK3, 73539 DIN PIXIE, 73539, DIN PIXIE, PIXIE

Izithenjwa

• Imaniwali yosebenzisayo