I-EMERSON CC200 Case Controller
Okuqukethwe
fihla
Imisebenzi ye-CC200
- Izinhlobo zamakesi okushisa aphansi, amaphakathi, nakabili ziyasekelwa.
- I-Stepper Valve Driver Onboard.
- Ukulawula kwe-EEPR okusekelwe kungcindezi noma izinga lokushisa.
- I-patent entsha elindile eyisishuphuki esintantayo yokuphatha iphoyinti lokusetha i-SST lungisa ngokuzenzakalelayo i-SST ye-evaporator ibe yindawo ekahle yokusetha yokukhipha umoya.
- Ikesi Bonisa ngesikrini esithintwayo.
- Ukudluliselwa kweFomu C kuvumela ukulawula okuqondile kwamakesi alayishiwe kanye nezintambo ezenziwe lula.
- Izintambo ezilula nokuxhumana kunciphisa umsebenzi nesikhathi sokusetha.
- Uxhumano lwe-Bluetooth® lwesimo sesilawuli esilula nesevisi.
Imininingwane Yesilawuli Esikhulu seCC200
| Igama | Incazelo |
| Imfuneko Yamandla | 24VDC 71 (Umhlaba) - 72 (+) - 73 (-) |
| Ukunikezwa kwamandla kagesi | Umthombo we-SELV/ Class 2, 24VDC |
| Kukalwe Impulse Voltage | 0.5 kV (Uhlangothi oluphakelayo oluyinhloko) / 2.5 kV (Uhlangothi lwemithwalo) |
| I-Ambient Operating Temp | 14°F ukuya ku-122°F (-10°C ukuya ku-50°C) |
| Izinga Lokushisa Lesitoreji | -40 kuya ku-185°F (-40 kuya ku-85°C) |
| Umswakama Ohlobene | 20-85% RH; ukungavumeli |
| Ukukhweza | I-DIN Rail |
| I-Dimensions Enclosure | 7 3/16 ″ x 4 5/16 ″ x 3 ″ (W x H x D) Thayipha 1 |
| I-RS485 Port A RS485 Port B | Ukulayishwa kweyunithi engaphansi kwe-1/6; kufika ku-57.6K Baud; Izodwa; Ukuqedwa kwe-Dipswitch 150 ohm; 3-Isixhumi setheminali. Izizathu ze-RS485 Port A kanye no-B zihlukanisiwe komunye nomunye, indawo yokujikeleza, kanye nomhlabathi. Onboard 100 ohm resistors phakathi kwamatheminali angu-RS485 “C” kanye nezizathu ezingazodwa ze-RS485 zivumela ukuxhumana okuqondile komhlaba okuqondile kwamatheminali “C”. |
| I-ETH1 ETH2 | Isiphindi se-BACnet TCP / IP (Ethernet 10/100) BACnet TCP / IP repeater (Ethernet 10/100) |
| Inhloso Yokulawula | Ukulawula Ukusebenza |
| Ukwakhiwa kokulawula | Ukulawula ukukhwezwa kukajantshi we-DIN kuzofakwa ezintweni zikagesi zeClass I Noma zeClass Ii |
| Iziqu Zokungcolisa | 2 |
| Uhlobo Lwesenzo | 1.B |
| Ngaphezulu kwe-voltage Isigaba | II |
I-Wiring Power Supply kanye nokucaciswa
| Imininingwane Yokuhlinzeka Amandla | |
| Amandla Ayisisekelo | 120VAC |
| Amandla wesibili | 24VDC |
| CC200 Power Imfuneko* | I-24VDC 60W |
| Ukunikezwa Amandla Okudingekayo* | I-CC200 Power Supply I-24VDC 60W U-Emerson P / N 318-3183 |
| Izindawo Zokuhambisa Amandla | 2 (-V) no-3 (+ V) |
| Izikhumulo Zamandla zeCC200 | 72 (+) –73 (-) - 71 (Umhlaba) |
| I-Wire Spec | 16 AWG noma intambo yobubanzi obukhulu |
| 24VDC Max Wire Ubude | 20” |
| Ukukhweza | I-DIN Rail egibele |
| Ubukhulu Bokuphakelwa Amandla* | 2.06" x 3.54" x 2.14" (W x H x D) |
*Qaphela: Uma uhlelo lwe-CC200 lunamamojula amathathu (3) wokunweba, ukunikezwa kwamandla okungu-92W P/N 318-3184 kuyadingeka.
- Isinyathelo 1: I-Mount Power Supply kanye ne-CC200 Main Controller ku-DIN Rail.
- Isinyathelo sesi-2: Amandla esibili ocingo ukusuka ku-Power Supply ukuya ku-CC200 Main Controller.
a. Incazelo yesithenjwa nomdwebo wamaTheminali.
b. Lokhu Kuzwela I-polarity. - Isinyathelo sesi-3: Amandla e-Wire Primary ekunikezeni amandla.
a. Bheka inkomba nokudweba kwamaTheminali.
I-CC200 Main Controller Output Wiring
Qaphela: Izinjini zabalandeli ezingaphezu kuka-5 amps kufanele asebenzise enye indlela yokufaka izintambo ngedivayisi yokushayela phakathi kuka-CC200 nenjini
- Isinyathelo 1: Qinisekisa ukuthi amandla AVALIWE ku-CC200 Main Controller.
- Isinyathelo sesi-2: Bheka umdwebo wezincazelo ezingezansi ukuze uthole amatheminali alungile okunqanyulwa kanye nendlela yokufaka izintambo:
I-CC200 Main Controller Output Wiring
Okwe-Fan Motors Ngaphezulu kuka-5A
- Abanye abalandeli abangaphezu kuka-5 amps
Imininingwane ye-CC200 Main Controller Output
| I-Relay Specifications | |||
| CC200 Ilebula |
AMP/VAC | KULAWULWA IMITHANDA | Termminal |
| Umlandeli / CT | I-Form C Relay/eyakhelwe ku-CT: CHA: Ukungazweli 5A, 240Vac noma ngaphansi Imoto 5FLA, 30LRA, 240Vac noma ngaphansi Umsebenzi Womshayeli B300 NC: Ukungazweli 5A, 240Vac noma ngaphansi Imoto 5FLA, 30LRA, 240Vac noma ngaphansi Umsebenzi Womshayeli C300 |
Abalandeli be-Evap | 4(C) – 5(NO) – 6 (NC) |
| I-Defrost | I-Form C Relay CHA: Ukungazweli 12A, 240Vac noma ngaphansi Imoto 10FLA, 60LRA, 240Vac noma ngaphansi Umsebenzi Womshayeli B300 NC: Ukungazweli 12A, 240Vac noma ngaphansi Imoto 5FLA, 30LRA, 240Vac noma ngaphansi Umsebenzi Womshayeli C300 |
I-Defrost heater | 7(C) – 8(NO) – 9(NC) |
| Ukukhanya | Case Lights | 10(C) – 11(NO) – 12(NC) | |
| Isiqandisi | I-LLSV | 13(C) – 14(NO) – 15(NC) | |
| Ukudluliselwa kwe-AUX | I-Alarm Out, i-Door Alarm, iSatellite yokulawula i-E2E, ikhophi yasenqolobaneni ye-RO | 16(C) – 17(NO) – 18(NC) | |
| I-AO1 (AO) | 4-20mA -10VDC | Isathelayithi yokulawula i-E2E, ikusasa Light Dimming, ikusasa Anti-umjuluko | 39(+) - 40(-) |
| I-AO2 (AO) | 4-20mA noma 0-10VDC | Ukufiphala Kokukhanya Okuzayo | 41(+) - 42(-) |
| I-TRIAC | 20W Max 24/120/230Vac | Ivalve ye-PMW | 1(Jmp) –2(Umugqa)–3(VALVE) Eqa Izikhumulo Zoku-1 no-2 KUPHELA we-24Vac Valve |
Imininingwane ye-CC200 Main Controller Input
| Imininingwane Yokufaka | ||
| Ilebula le-CC200 | Incazelo | Termmals & Umbala |
| I-DAT | Khipha Umoya | 46 – 47 Okuhlaza |
| TERM | Ukuqedwa kwe-Defrost | 48 – 49 iwolintshi |
| I-RAT | Buyisa Umoya | 50 – 51 Okunsomi |
| KHIPHA | Coil Out | 52 – 53 |
| INGCINDEZI | I-Evaporator Pressure Transducer | 43(0v) - 44(Sig) - 45(+5V) Okumnyama - Okumhlophe - Okubomvu |
| I-Def CT Amps | I-Defrost Amps (i-defrost kagesi kuphela) | 54(+) - 55(-) |
| Okokufaka kwe-Aux AI & DI | ||
| I-AI1 AI2 | Imisebenzi elungisekayo: I-fan yangaphandle ye-CT, i-Coil Inlet Temp, i-Product Temp, i-Circuit Suction Temp | 56(+) - 57(-) 58(+) - 59(-) |
| I-DI1 DI2 DI3 DI4 | Iswishi yomnyango, iswishi yensiza, iswishi yesikhashana yesikhashana, ukushintsha kwethemu okuchithayo, ukuvala shaqa, i-satellite 1 ye-E2E, isathelayithi 2 ye-E2E | 31(DI1) - 32(C) 33(DI2) - 34(C) 35(DI3) - 36(C) 37(DI4) - 38(C) |
| Imininingwane Yezintambo Yokunweba Okokufaka | |
| Izinzwa ze-Analog Temp noma okokufaka kwedijithali | Ikhebula Elijwayelekile 92454A U-Emerson P / N 135-0600 noma i-Belden 8761 U-Emerson P / N 035-0002 noma okulinganayo 2 ikhondakta evikelwe 22 AWG noma ikhebula enkulu ingase isetshenziselwe ukunweba ubude bufike kubukhulu obungu-50 ft. Uma ihhanisi lomkhiqizi kufanele linwetshwe, hlanganisa izintambo ne-solder futhi ugqume ngeshubhu elishwabanisa ukushisa. |
| I-Pressure Transducer | I-Belden 28326AS U-Emerson P / N 135-2832 noma i-Belden 8771 U-Emerson P / N 135-8771 noma okulinganayo 3 ikhondakta evikelwe 22 AWG noma ikhebula enkulu ingase isetshenziselwe ukunweba ubude bufike kubukhulu obungu-50 ft. Uma ihhanisi lomkhiqizi kufanele linwetshwe, hlanganisa izintambo ne-solder futhi ugqume ngeshubhu elishwabanisa ukushisa. |
I-Cold Chain Connect uhlelo lokusebenza lweselula lwe-CC200 lokusetha amapharamitha, okokufaka kwe-graphing kanye nokuphumayo, ukubeka ngaphezulu kwesevisi, kanye viewama-alamu.
I-Cold Chain Connect inikeza iwindi ekusebenzeni kwe-CC200 kanye nokuxilongwa ngokuqondile endaweni yesiqandisi noma ibhokisi lokungena.
Landa i-Cold Chain Connect ku-App Store® kwa-Apple:
https://www.apple.com/ios/app-store
I-wiring yokufaka ye-CC200
- Isinyathelo 1: Qiniseka ukuthi amandla acishiwe ku-CC200 Main Controller.
- Isinyathelo 2: Nquma ukuthi iziphi izinzwa ezizodingeka kanye nocingo ngesibaluli esingenhla.
a. Uma inzwa idinga ukwandiswa i-Emerson isekela kuphela ukushisa kokushisa kanye ne-solder. - Isinyathelo sesi-3: Thola ukuthi mangaki amakhoyili kumakesi.
a. Kumakesi amakhoyili amaningi i-CC200 isekela inzwa eyodwa ikhoyili ngayinye yokukhipha umoya, umoya wokubuyisela, ukunqanyulwa kwe-defrost kanye ne-outlet yekhoyili.
Ama-transducer okucindezela amakesi amakhoyili amaningi angase afakwe ikhoyili eyodwa noma eyodwa kwikesi lonke (ipharamitha iyakhetheka).
b. Ezimweni zamakhoyili amaningi izinzwa ezikukhoyili # 1 zizonqanyulwa kwi-CC200 Main Controller. Okhoyili bezinzwa zesibili nabesithathu bazodinga i-Module Yokukhulisa ngekhoyili ngayinye futhi inzwa yekhoyili ngayinye izonqamuka kwiModyuli ngayinye yokwandisa.
I-wiring yokufaka eyi-CC200 Main
I-CC200 Stepper Valve Wiring nokucaciswa
- I-CC200 STEPPER VALVE ngayinye ephumayo lapho icushwe njenge-“Bipolar” iyakwazi ukuhlinzeka ngama-500mA/isigaba futhi ishayele ama-valve ayi-12 Volt 2-Phase bipolar unomphela azibuthe anama-volts angu-12 angashintshi kusetshenziswa i-Full Step mode 4-step drive sequence. Amavalvu e-Bipolar stepper anokumelana nesigaba ngaphansi kwama-ohm angama-26 noma adinga ivolumutage chopper njalo umshayeli wamanje, NGEKE ukushayelwa ngohlelo CC200.
- Ivalve ngayinye ye-CC200 STEPPER VALVE uma icushwe njenge-“Unipolar” iyakwazi ukuhlinzeka ngama-valve angafika ku-300mA/isigaba futhi ishayele ama-valve ayi-12 Volt 5-wire unipolar unomphela ozibuthe we-stepper ane-1-2 Phase Half Step 8 ukulandelana kokulawula ukushaya kwenhliziyo. Ama-valve e-unipolar stepper anokumelana nesigaba ngaphansi kwama-ohm angu-40 AKAKWAZI ukushayelwa ngohlelo lwe-CC200.
| I-Stepper Valve (i-Sporlan CDS kuphela) | ||
| I-Stepper Valve | I-Bipolar | W2 |
| 76(Mhlophe) – 77(Mnyama) | ||
| W1 | ||
| 78(Bomvu) - 79(Okuhlaza) | ||
| I-Stepper Valve - Imojula Yokunweba | I-Bipolar | W2 |
| 33 (Mhlophe) – 34 (Mnyama) | ||
| W1 | ||
| 35 (Bomvu) - 36 (Luhlaza) | ||
- Isinyathelo 1: Qiniseka ukuthi amandla acishiwe ku-CC200 Main Controller.
- Isinyathelo sesi-2: Isistimu yokulawula Ikesi ye-CC200 (Isilawuli Esiyinhloko + Amamojula Okwandisa) isekela ukulawulwa kwe-Electronic Expansion Valve (EEV) kusetshenziswa amavalvu e-Pulse Width Modulation (PWM) NOMA ama-Stepper valves kodwa HHAYI kokubili.
Ikesi lokuqala ohlwini lwe-CC200 (“a” Case) linokwesekwa kokulawula i-Electronic Evaporator Pressure Regulation (EEPR) valvu enyathelayo.
- I-PWM EEV 1 noma i-Stepper EEV 1 ihlezi iku-CC200 Main Controller.
- I-PWM EEV 2 noma i-Stepper EEV 2 ihlezi iku-Expansion Module 1
- I-PWM EEV 3 noma i-Stepper EEV 3 ihlezi iku-Expansion Module 2
- Indawo ye-EEPR
- Uma kusetshenziswa i-PWM EEV, i-EEPR ihlezi iku-CC200 Main Controller Stepper terminals.
- Uma kusetshenziswa i-Stepper EEV, i-EEPR itholakala kumatheminali okugcina e-Expansion Module Stepper
a.Incazelo yezintambo engenhla ingeye-Sporlan CDS kanye namavalvu e-SER kuphela.
b.Uma kusetshenziswa amanye amavalvu womkhiqizi, bheka imininingwane yomkhiqizi bese uthintana no-Emerson ukuze uthole imiyalelo yokuthi unqanyulwa kanjani.
Isinyathelo 3: Bheka umdwebo kanye nemininingwane yokuqedwa kwe-valve:
- CC200 / Ukunwetshwa Module Stepper Valve Wiring
CC200 Ukunwetshwa Module Wiring kanye Imininingwane
| Ilebula ye-CC200 | Incazelo | Termmals & Umbala | |
| I-DAT | Khipha Umoya | 16 – 17 Okuhlaza | |
| TERM | Ukuqedwa kwe-Defrost | 18 – 19 iwolintshi | |
| I-RAT | Buyisa Umoya | 20 – 21 Okunsomi | |
| KHIPHA | Coil Out | 22 -23 | |
| INGCINDEZI | I-Evaporator Pressure Transducer | 12(0v) – 13(Sig) – 14(+5V) Okumnyama - Okumhlophe - Okubomvu |
|
| Izinhlobo ze-Wire Zokunweba Okokufaka namaValve | |||
| Izinzwa ze-Analog Temp noma okokufaka kwedijithali | Ikhebula Elijwayelekile 92454A U-Emerson P / N 135-0600 noma i-Belden 8761 U-Emerson P / N 035-0002 noma ikhebula elilingana no-2 livikelwe i-22 AWG noma ikhebula elikhudlwana lingase lisetshenziswe ukuze kunwetshwe ubude bufinyelele ubuningi 50 ft. Uma ihhanisi lomkhiqizi kufanele linwetshwe, hlanganisa izintambo ne-solder futhi ugqume ngeshubhu elishwabanisa ukushisa. |
||
| I-Pressure Transducer | I-Belden 28326AS U-Emerson P / N 135-2832 noma i-Belden 8771 U-Emerson P / N 135-8771 noma ikhebula elilingana no-3 livikelwe i-22 AWG noma ikhebula elikhudlwana lingase lisetshenziswe ukuze kunwetshwe ubude bufinyelele ubuningi 50 ft. Uma ihhanisi lomkhiqizi kufanele linwetshwe, hlanganisa izintambo ne-solder futhi ugqume ngeshubhu elishwabanisa ukushisa. |
||
| I-EEV Stepper (Unipolar) | Sebenzisa ihhanisi lomkhiqizi ezinobude obungadluli 40 ft (12 amamitha). | ||
| I-EEPR Stepper (Bipolar) EEV Stepper (Bipolar) Izinhlelo zokusebenza zokungena) | I-Belden 28326AS U-Emerson P / N 135-2832 noma i-Belden 9418 U-Emerson P / N 135-9418 noma ikhebula elilingana no-4 livikelwe i-18 AWG noma ikhebula elikhudlwana lingase lisetshenziswe ukuze kunwetshwe ubude bufinyelele ubuningi 75 ft. Uma ihhanisi lomkhiqizi kufanele linwetshwe, hlanganisa izintambo ne-solder futhi ugqume ngeshubhu elishwabanisa ukushisa. |
||
- Isinyathelo 1: Nquma ukuthi ngabe udinga iModyuli Yokukhulisa.
a. Uzokwengeza Ukunwetshwa kwekhoyili yesibili noma yesithathu. Ikhoyili ngayinye izoba nezinzwa zesikhashana kanye ne-transducer futhi izofakwa kwi-Module yokwandisa ethintekile. - Isinyathelo 2: Ukukhuluma neModyuli Yokunwetshwa
a. Setha ikheli leModyuli ngayinye yokwandiswa usebenzisa i-ON / OFF switch switch bank ekhoneni eliphezulu kwesokunxele sehadiwe (bheka isithombe esingezansi).
b. Imodyuli yokwandisa kumele isethelwe kukheli 1, iModyuli Yokunweba ibhekise ku-2, iModyuli Yokunweba yesithathu ibhekiswe ku-3. - Isinyathelo 3: Faka iModyuli Yokukhulisa.
a. Qinisekisa ukuthi amandla acishiwe ku-CC200 Main Controller. Amandla azobuyiselwa esinyathelweni sakamuva.
b. Faka i-Module 1 Yokukhulisa kujantshi we-DIN oseduze nohlangothi lwangakwesokudla lweCC200. I-CC200 Expension port terminal V + kufanele ihambisane ne-Expension Module 1 Expension port terminal V +. Slayida iModyuli Yokunweba ungene echwebeni lokunwetshwa le-CC200 ngakho-ke izixhumi zombili zedivayisi yokuNweba zihlangana ndawonye.
c. Uma Amamojula Wokunweba 2 no-3 ekhona, xhuma ku-Expension Module 1's port port usebenzisa indlela efanayo echazwe esinyathelweni esingenhla.
Ayikho i-wiring edingekayo phakathi kwe-CC200 Main Controller kanye ne-CC200 Module Module. Amandla nokuxhumana kutholwe echwebeni lokunwetshwa le-CC200 futhi kudluliswe echwebeni ngalinye lokwandiswa kweModyuli Yokwandisa. - Isinyathelo 4: Qeda izinzwa kwiModyuli Yokunweba bese ubheka umdwebo nezincazelo ezingenhla zezinombolo zokugcina nokuthi zinganqanyulwa kanjani.
Lapho konke ukuqedwa kwenzwa sekuqediwe futhi itheku lokunwetshwa kweModyuli yokuNweba lixhunywe ngokuvikelekile echwebeni lokunwetshwa le-CC200, buyisela amandla we-24VDC ku-CC200 Main Controller. Uma sekuxhunyiwe, i-Module Yokukhulisa i-PWR ON LED izokhanyisa okuluhlaza okukhombisa amandla okuphakela akhona.
Ukuxhuma Amamojula Wokunweba Amabili Nokuqedwa
CC200 Case Khombisa
| Imininingwane ye-CC200 Khombisa | |
| Imfuneko Yamandla | Inikwa amandla asuka ku-CC200 Case Controller |
| Kukalwe Impulse Voltage | 330 |
| Inhloso yokulawula | Ukulawula Ukusebenza |
| Ukwakhiwa kokulawula | Ukulawulwa kokukhwezwa kwephaneli kuzofakwa kuzinto zikagesi zeClass III |
| Uhlobo Lwesenzo | 1.B |
| Indawo ebiyelwe | Thayipha 1 |
| Ngaphezulu kwe-voltage Isigaba | I |
| Intambo Edingekayo | I-Belden #8771 3C22AWG noma i-Belden #8772 3C22AWG, Max 50 ft. |
| Ukukhweza | Sebenzisa iziqeshana ezishelelayo ezimhlophe ezinikezwe ne-CC200 Display |
| ITemp Esebenzayo | 14°F kuya ku-122°F / -10°C kuya ku-50°C |
| Umswakama Ohlobene | 20 kuya ku-85 RH% (umswakama ongajiki) |
| Ukuvikelwa | Umzimba: IP20; Ngaphambili: IP65 |
| Iziqu Zokungcolisa | 2 |
| Amaphuzu | Izikhumulo ze-CC200 eziya kuma-CC200 Display Terminals |
| - | 27 (-) kuya ku-5 (-) |
| + | 28 (+) kuye ku-4 (+) |
| I-VNR | 29 (VNR) kuye ku-3 (VNR) |
- Isinyathelo 1: Qiniseka ukuthi amandla ku-CC200 Main Controller acishiwe.
- Isinyathelo sesi-2: nqamula usuka ku-CC200 Main Controller uye ku-CC200
Bonisa.
a. Kubalulekile ukuthi lokhu kunqanyulwa kwenziwe ngendlela efanele ngoba lokhu kungaholela ekulimaleni kuwo womabili amadivayisi uma kunganqanyulwa kahle.
b. Isiqeshana bese uvikela isihlangu kuzo zombili iziphetho zekhebula lokuxhuma le-Belden. Gcina ubude bekhebula ngaphansi kwama-50 ft (15 metres). - Isinyathelo 3: Amandla ku-CC200 Main Controller.
Izinombolo Zengxenye Yoku-oda
| * Inombolo yengxenye ye-Emerson | Incazelo |
| 810-3180 | I-CC200 Isilawuli Esiyinhloko |
| 318-3181 | I-CC200 Expansion Module |
| 318-3182 | CC200 Case Khombisa |
| 318-3183 | I-CC200 Power Supply 24VDC 60W |
| 318-3184 | I-CC200 Power Supply, 24VDC, 3.83A, 92W, DIN Mount Qaphela: Uma isistimu ye-CC200 inamamojula amathathu (3) okunweba, ukunikezwa kwamandla okungu-92W P/N 318-3184 kuyadingeka. |
| 501-1122 | Khipha Inzwa Yezinga Lokushisa Lomoya |
| 501-1127 | Inzwa Yezinga Lokushisa Yokuqeda Iqhwa |
| 501-1128 | Buyisela Inzwa Yezinga Lokushisa Lomoya |
| 501-1125 (okuluhlaza okwesibhakabhaka) 501-1126 (bomvu) |
Coil Out Temperature Inzwa |
| 800-2100 | 100lb Ingcindezi Transducer |
| 800-2650 | Emerson 650 PSIG Pressure Transducer |
| 261-0001 | I-CC200 Defrost/Fan CT, 20A (4-20mA) |
| 261-0002 | I-CC200 Walk in Defrost CT, 50A (4-20mA) |
| 302-0100 | I-CC200 Case Display Bracket Qaphela: Ukuze usebenzise ne-318-3182 CC200 Case Display |
| 302-0105 | I-Deli Case Display Bracket |
* Ukuze usebenze kahle nge-CC200, izingxenye ze-Emerson ziyadingeka.
Ukuze uthole ibhukwana eliphelele lomsebenzisi, skena ikhodi ye-QR:
Ukwesekwa Kwamakhasimende
Lo mbhalo ungase ukopishwe ukuze uzisebenzisele umuntu siqu.
Vakashela wethu webindawo ku www.climate.emerson.com ukuthola imibhalo yakamuva yezobuchwepheshe nezibuyekezo.
Joyina i-Emerson Technical Support ku-Facebook http://on.fb.me/WUQRnt
Ukuze uthole ucingo losekelo lobuchwepheshe 833-409-7505 noma i-imeyili I-ColdChain.I-TechnicalServices@Emerson.com
Okuqukethwe kwalolu shicilelo kwethulwe ngezinjongo zolwazi kuphela futhi akumele kuthathwe njengeziqinisekiso noma iziqinisekiso, eziveziwe noma ezishiwo, mayelana nemikhiqizo noma amasevisi achazwe lapha noma ukusetshenziswa noma ukusebenza kwawo. U-Emerson unelungelo lokushintsha imiklamo noma imininingwane yemikhiqizo enjalo nganoma yisiphi isikhathi ngaphandle kwesaziso. Isibopho sokukhetha okufanele, ukusetshenziswa nokunakekelwa kwanoma yimuphi umkhiqizo sihlala sikumthengi kanye nomsebenzisi wokugcina.
©2022 u-Emerson wuphawu lokuthengisa lwe-Emerson Electric Co.
Amadokhumenti / Izinsiza
 |
I-EMERSON CC200 Case Controller [pdf] Umhlahlandlela Womsebenzisi CC200 Case Controller, CC200, Case Controller, Controller |
