Elsist SlimLine Cortex M7 CPU Module
Amanani
Ukuxhumana
Imojula ye-CPU ye-SlimLine Cortex M7 (LogicLab) ihlinzekwe nge-TB ekhiphekayo ukuze ixhume Amandla, i-I/Os kanye nebhasi le-Field, isixhumi se-IDC sokuxhuma amamojula okunweba, izixhumi ze-RJ45 zamachweba we-RS232 COM kanye nembobo ye-Ethernet, nesixhumi esisodwa se-microUSB-AB.
Ukunikezwa kwamandla (Fig. 3)
Imojula inganikwa amandla ngomthombo we-DC ngaphakathi kwebanga elingu-10-30Vdc. Ukuxhumeka kwamandla kumele kwenziwe ngokuya nge- Umdwebo 2.
Amandla aboniswa yi-LED eluhlaza “PWR”.
ISEXWAYISO! Amanani amakhulu kunomkhawulo ovunyelwe angalimaza idivayisi kakhulu.
Ukuxhumana okuphansi (Fig. 2)
Idivayisi kufanele ixhunywe ngqo ku-Ground kusetshenziswa ibhulokhi yetheminali kusixhumi sokuphakela amandla (Umdwebo 2).
Ukuxhuma kufanele kwenziwe ngocingo olunesigaba okungenani esingu-2.5mm2, kubha ye-copper equipotential yesigaba esanele.
Ukuze uqinisekise ukwenqatshwa komsindo okuhle, gcina lokhu kuxhumana kukufushane ngangokunokwenzeka futhi qaphela ukukubeka kude kwezinye izintambo.
Okokufaka Kwedijithali ne-Analogi (Umdwebo 3)
Imojula ihlinzekwa ngokufakwa kwedijithali oku-2 kanye nokufaka kwe-analog oku-2 (Uma kukhona) Okokufaka kwedijithali kugqunywe ngogesi ohlelweni futhi kungasetshenziswa njenge-PNP noma i-NPN ukuze kube lula kuwe. Okokufaka kwedijithali i-DI00 kungase kusetshenziswe okokufaka okuphikisayo nge-Fmax=10KHz.
Okokufaka kwe-analogi (lapho kuhlinzekiwe) akuvinjiwe ohlelweni futhi kwamukela ivolumutage kusuka ku-0 kuye ku-+10Vdc.
Imojuli yamukela okokufaka kwe-analogi yemodi evamile emibili noma, okunye, okukodwa kumodi yokuhlukanisa.
ISEXWAYISO! Ukuze uxhume okokufaka kwe-analogi sebenzisa amakhebuli ahlinzekwe KAKHULU futhi uqaphele ukuwabeka kude nemithombo yomsindo.
Imiphumela Yedijithali (Umdwebo 3)
Imojula ihlinzekwa 2 Optomosfet static imiphumela yedijithali, galvanically insulated kusukela ohlelweni. Okuphumayo kungasetshenziswa njenge-PNP noma i-NPN ukuze kube lula kuwe.
ISEXWAYISO! Okufushane kokuphumayo kungalimaza unaphakade idivayisi. Ilungele ukubeka i-fuse esheshayo eyengeziwe engu-250mAFF ochungechungeni lokuphumayo okuvamile (okungukuthi i-Ferraz G084002P).
Ibhasi lesandiso nebhasi yocingo olu-1 (Umfanekiso 9)
Ibhasi lokuxhumana elinamamojula okunweba lisebenzisa isixhumi esibonakalayo se-Fast I 2C™ futhi litholakala kusixhumi se-IDC10 (P7).
Amamojula okunweba kufanele axhunywe ngezintambo ezikhethekile ze-CBL045**00/CBL074*000.
I Umdwebo 10 yi example yokuxhumeka kwamamojula esandiso. Kungase kuxhunywe amamojula afinyelela kwangu-16 ku-CPU. (ngemuva kokuhlola inani eliphezulu lamanje elidingekayo)
ISEXWAYISO! Ngaphambi kokuxhuma amamojula esandiso kusistimu, qiniseka ukuthi ivaliwe. Ukushoda kwalo mthetho kungase kuveze ukwehluleka kumamojula.
Lolu cingo lungase lufakwe ibhasi le-1-WireTM (P11), ngalo ungathola amadivaysi e-i-Button™, njenge TAG ukuze uthole ukuhlonza komuntu siqu, izinzwa zokushisa nezinye izisetshenziswa.
Izimbobo zochungechunge lwe-RS232 (Umfanekiso 8)
Idivayisi ihlinzekwa ngezimbobo ezimbili ze-serial DTE (Isisetshenziswa Setheminali Yedatha). Ukuxhumana phakathi kwama-DTE, njengamaKhompiyutha Siqu, Izikhumulo Zokusebenza njll., kufanele kwenziwe ngentambo ye-Nullmodem enobude bekhebula eliphakeme elingu-15 mt, ngokwezicaciso ze-EIA.
Lezi zimbobo azivalwanga ngogesi ohlelweni, kuyanconywa ukuthi uqinisekise, ngaphambi kokuthi uxhume ndawonye amadivayisi ahlukene, umehluko wamandla aphansi.
ISEXWAYISO! Umehluko owedlulele wamandla ku-ground loop kungase kubangele umonakalo kumadivayisi.
Ibhasi lensimu (Fig. 8)
Imojuli ingase ihlinzekwe ngebhasi lensimu le-RS485 noma le-CAN (bona ukuhlonza umkhiqizo Umdwebo 7), kuzo zombili lezi zimo ibhasi ivalwe nge-galvanically kusuka ohlelweni. Ukuze uxhume ibhasi lensimu sicela ubheke Umfanekiso ohlangothini.
Nge-LK4 jumper ingase ixhunywe noma cha i-120 Ohm termination resistor.
Imbobo ye-Ethernet (Fig. 1)
Imojula ihlinzekwa nge-Ethernet 10/100-Base T(x) etholakala kusixhumi se-RJ45 P6; uxhumano, oluboniswa ku Umdwebo 1, ihambisana ne-Ethernet ejwayelekile IEEE 802.3 100-Base T.
Ukuze uxhume idivayisi kunethiwekhi ye-Ethernet ingasetshenziswa i-UTP Cat. 5 ikhebula i-RJ45, exhunywe kusiwishi, kuyilapho ukwenza iphuzu ukuze ukhombe uxhumano kwanele ukusebenzisa ikhebula lokuchibiyela i-RJ45 iyodwa. Idivayisi iyi-Auto-MDIX, ngakho-ke ayidingeki intambo enqamulayo ukuyixhuma ku-PC ngokuqondile.
Ku-P6 atholakala ama-LED amabili okubonisa isimo se-Ethernet: Amasiginali we-LED eluhlaza, uma ivuliwe, okuthi inethiwekhi isebenza ngesivinini esingu-100Mb/s. I-LED ephuzi ikhombisa umsebenzi wesixhumanisi se-Ethernet. Imojula ihlinzekwa nge-DHCP enikwe amandla futhi, uma kuntuleka iseva ye-DHCP, ikheli le-IP linganikezwa Uhlelo lokusebenza.
ISEXWAYISO! Imojula ihlinzekwa ngemininingwane yomsebenzisi woMphathi: Umsebenzisi “Umphathi” nephasiwedi “Umphathi”. Kunconywa kakhulu ukuwashintsha ngaphambi kokufakwa.
I-USB Host/Imbobo yedivayisi (Fig. 2)
Imojuli ingase ifakwe imbobo ye-microUSB-AB ekwazi ukusetshenziswa njengomsingathi noma imodi yedivayisi.
Ikhadi le-slot le-SD (Fig. 6)
Imojula ihlinzekwa nge-slot mini-SD Card. Ikhadi lingasetshenziselwa imisebenzi yokugcina kungobo yomlando noma imisebenzi yomlando wedatha ngesikhathi sokusebenza okuvamile. Ikhadi kufanele li-odwe ngokwehlukana.
Ukusayinda isimo (Fig. 6)
Idivayisi ihlinzekwa ngama-LED athile ukuze ibonise isimo sayo:
- I-PWR (i-LED eluhlaza)
Ibonisa ukuthi idivayisi inikwe amandla - RUN (I-LED Ephuzi)
Ukucwayiza njalo kubonisa ukuthi uhlelo luyasebenza, - I-RDY (i-LED eluhlaza)
Lapho ukukhanya kukhombisa ukuthi uhlelo selulungile futhi lulawula amamojula we-I/O ngokuya ngohlelo lomsebenzisi.
Uma ivaliwe isetha kabusha isimo sokuphumayo kumamojula esandiso ekugcineni axhumeke kusistimu. - I-DO0x (Ama-LED abomvu)
Uma ukukhanya kukhombisa ukuthi okukhiphayo okuhambisanayo kwedijithali kucushiwe.
I2 I-C™ wuphawu lokuhweba lwe-NXP Semiconductors
Imininingwane Yezobuchwepheshe |
|||||
| Ikhodi Yedivayisi | MPS054*000 | MPS054*100 | MPS054*110 | MPS054*200 | MPS054*210 |
| Ukunikezwa kwamandla kagesi | 10-30Vdc 1,4W (1) | 10-30Vdc 1,7W (1) | |||
| Amandla okuphelelwa yisikhathi. ibhasi | 5Vdc 2.6A ubuningi. | ||||
| Iphrosesa | I-RISC 32bit Cortex M7 300MHz, 2MB FlashEPROM, 384 kB SRAM | ||||
| Inkumbulo yohlelo | 131 kB uhlelo lomsebenzisi (2) (Inketho 262kB) | 262 kB uhlelo lomsebenzisi (2) | 131 kB uhlelo lomsebenzisi (2) (Inketho 262kB) | 262 kB uhlelo lomsebenzisi (2) | |
| I-FlashEPROM Min. ukugcinwa kwedatha Iminyaka eyi-10 | |||||
| Inkumbulo enkulu | 398 kBytes FlashEPROM ka-4MBytes etholakalayo kudatha yomsebenzisi(2) | ||||
| Imemori yokulondoloza idatha | 6kBytes FRAM ka-32kBytes etholakalayo kudatha yomsebenzisi(2) | ||||
| Imemori yedatha | 12kB SRAM ka-384kB etholakalayo kudatha yomsebenzisi (2) (Inketho 20 kB) | 20kB SRAM ka-384kB etholakalayo kudatha yomsebenzisi (2) | 12kB SRAM ka-384kB etholakalayo kudatha yomsebenzisi (2) (Inketho 20 kB) | 20kB SRAM ka-384kB etholakalayo kudatha yomsebenzisi (2) | |
| I-SD-Card Slot | Yebo, i-micro SD (ikhadi liyakhethwa) | ||||
| Real Time Clock | Yebo, Ukugcinwa Kwesikhathi Kwesipele kuyakhethwa | Yebo, Ukugcinwa Kwesikhathi Kwesipele 5 iminyaka | Yebo, Ukugcinwa Kwesikhathi Kwesipele kuyakhethwa | Yebo, Ukugcinwa Kwesikhathi Kwesipele 5 iminyaka | |
| I-SNTP nesikhathi sokonga emini kuyasekelwa | |||||
| I-USB I/F | akukho | 1 x micro-USB AB (Imodi yokubamba/yedivayisi iyasekelwa) | akukho | 1 x micro-USB AB (Imodi yokubamba/yedivayisi iyasekelwa) | |
|
Okokufaka kwedijithali |
2 I-Optoisolated PNP/NPN 5-30Vdc, 5mA@24V (DI00 ingasetshenziswa njengokufakwayo kwekhawunta nge-Fmax=10kHz) | ||||
|
Okokufaka kwe-Analog |
akukho |
Imodi evamile engu-2*0-10Vdc noma imodi yokuhlukanisa engu-1 (isixazululo esingu-12bit) |
akukho |
Imodi evamile engu-2*0-10Vdc noma imodi yokuhlukanisa engu-1 (isixazululo esingu-12bit) | |
| Ukukhishwa Kwedijithali | 2 OptoMOS 0.25A@40Vdc/ac, Vmin 0V, ON ukumelana nesimo 1Ohm max TOn 0,75mS max, TOff 0,2mS max | ||||
| I-Ethernet I/F | I-RJ45 10/100base-T(x) I-Auto-MDIX | ||||
| Ibhasi lensimu | akukho | I-Insulated Fail Safe High impedance RS485 | I-Insulated CAN Bus 2.0B iyahambisana, ISO11898-1 | ||
| Ibhasi yokwandisa | I-I2C™ High-Speed | ||||
| Ibhasi elingu-1 | akukho | Yebo | akukho | Yebo | |
| RS232 I/F | 2 * DTE kuzixhumi ze-RJ45 | ||||
| Izinkomba zesimo | Amandla, GIJIMA, ILUNGILE, i-USB, Isimo Sokuphuma Kwedijithali | ||||
| Imvelo | Izinga lokushisa lokusebenza: kusuka -20 kuya +70 ° C | ||||
| Ukushisa kwesitoreji: kusuka ku -40° ukuya ku-80°C | |||||
| Umswakamo Oyisihlobo: Max. 90% | |||||
|
Ubukhulu nesisindo |
Ubukhulu: 22.5 mm L x 101 mm W x 120 mm H | ||||
| Isisindo: 150g | |||||
| Izimvume | CE, RoHS | ||||
| Amanothi | (1) Isimo esibi kakhulu
(2) I-Firmware kuye |
||||
Ukuxhumeka kwe-Half-Duplex (RS485 kuphela)
- Ibanga eliphezulu phakathi kwedivayisi yokuqala neyokugcina alidluli amafidi angu-4000 (RS485).
- Ukumelana nokunqanyulwa kufanele kuhlale kuxhunywe kudivayisi yokuqala neyokugcina.
- Ikhebula kufanele livikelwe futhi lisontekile libhanqiwe.
Amanothi obuchwepheshe oxhumo lwe-CAN
Imininingwane yobuchwepheshe yebhasi le-CAN inikezwa yi-ISO 11898 Standard. Isivinini esiphezulu sebhasi ngu-1Mbit/s kukhebula lobude obungu-130ft. Kuthebula elingezansi kubalwe umsebenzi wejubane ovunyelwe wobude bekhebula.
|
Umsebenzi wesivinini esikhulu sobude bebhasi (CAN) |
|||
| Ubude Bebhasi | Isivinini sokudlulisa | Ubude Bebhasi | Isivinini sokudlulisa |
| 100 amamitha (330 ft) | 500 kbit/s | 500 amamitha (1600 ft) | 125 kbit/s |
| 200 amamitha (650 ft) | 250 kbit/s | 6 amakhilomitha (20000 ft) | 10 kbit/s |
Ukuxhumeka komdwebo
Ukwesekwa Kwamakhasimende
Via G. Brodolini, 15 (ZI) 15033 CASALE M.TO (AL) ITALY
Ucingo +39-0142-451987 Ifeksi +39-0142-451988
I-inthanethi: http://www.elsist.it i-imeyili: elsist@elsist.it
Amadokhumenti / Izinsiza
 |
Elsist SlimLine Cortex M7 CPU Module [pdf] Imaniwali yosebenzisayo I-SlimLine Cortex M7 CPU Module, SlimLine, SlimLine CPU Module, Cortex M7 CPU Module, M7 CPU Module, Cortex CPU Module, CPU Module, CPU, Module |
