I-ECOLAB AFS-1E Isiteshi Sokugcwalisa Okuzenzakalelayo

Imibuzo Evame Ukubuzwa

• Q: Ngingasebenzisa uhlobo oluhlukile lwe-diaphragm yepompo kune- ipompo ejwayelekile ye-Kalrez?
  • A: Yebo, ungasebenzisa i-Santoprene noma i-Viton diaphragm njengokuzikhethela ukushintshwa kwepompo evamile ye-Kalrez.
• Q: Yini okufanele ngiyenze uma umfutho womoya ocindezelwe ungaphansi ububanzi obunconywayo?
  • A: Uma ingcindezi yomoya engenayo iwela ngaphansi kwama-40 PSI, ungakwenzi sebenzisa iyunithi ukuze uvimbele izinkinga zokusebenza ezingaba khona. Hlola futhi lungisa umfutho womoya ngokufanele ngaphambi kokusetshenziswa.

ULWAZI LOKUPHEPHA

Funda leli bhukwana ngokuphelele futhi uqonde umshini ngaphambi kokuwusebenzisa noma ukuwusevisa.

• Funda yonke imiyalelo ngaphambi kokufaka noma iyunithi yokusebenza.
• Iyunithi inikezelwe ukusetshenziswa komkhiqizo owodwa kuphela. Umkhiqizo kufanele ugunyazwe uchwepheshe wesicelo se-Ecolab.
• Njalo gqoka izinto zokuzivikela ezifanelekile (i-PPE) lapho usebenza noma uhlinzeka ngeyunithi.
• Ngaso sonke isikhathi landela zonke izinyathelo zokuphepha zamakhemikhali kanye neziqondiso zokusingatha ezinikezwe umkhiqizi wamakhemikhali kanye ne-Material Safety Data Sheet (MSDS).
• Umfutho womoya ongenayo awukwazi ukudlula i-100 PSI (7 bar).
• Iyunithi ngeke isebenze kahle uma umfutho womoya ongenayo ungaphansi kwama-40 PSI (2.7 bar).
• Ungeqi izinga lokushisa loketshezi elingu-100˚F (37˚C).
• Ikhwalithi yomoya kufanele ihambisane ne-ISO 8573-1, isigaba 4.4.2.
• Ungasebenzisi i-lubricator yomoya ngaphambi kweyunithi.
• Ungasebenzisi nama-hydrocarbons, izincibilikisi, izinto zokususa umoya, noma imikhiqizo evuthayo.
• Lapho usebenza ngezinto eziyingozi ezingase zilimaze noma zicasule isikhumba kanye/noma amehlo, qiniseka ukuthi ishawa eliphuthumayo neziteshi zokugeza amehlo kuyatholakala ngokuhambisana nezindinganiso zase-Europe EN 15154-1/2.
• ISAZISO: Akukho emthethweni ukusebenza noma iyunithi yesevisi ezweni eliyilungu le-EU uma imanuwali ingabhaliwe ngolimi lwaleso sifundazwe. Abasebenzisi kufanele bafunde futhi baqonde imanuwali yeziqondiso ngaphambi kokusebenzisa noma ukusevisa okokusebenza. Sicela uxhumane ne-ejenti yakho yemishini uma kudingeka ukuhumusha.

VIKELA INDAWO

Sicela ulahle izinto zokupakisha, izingxenye zemishini emidala, noketshezi oluyingozi ngendlela ephephile ngokwendawo ngokuvumelana nemithetho yendawo yokulahlwa kukadoti. Hlala ukhumbula ukuvuselela kabusha. *Imininingwane nezingxenye zingashintsha ngaphandle kwesaziso.

Imininingwane

• Liquid Temperature ……………. 40˚F ukuya ku-100˚F (4.4˚C ukuya ku-37˚C)
• I-Priming Dry ………………….. 15 ft. (4.5 m)
• I-Priming Wet…………………… 20 ft. (6.1 m)
• Isilinganiso sokugeleza ……………………… kufika ku-5 GPM (18.9 L/min)
• I-Air Supply Pressure ……… 20 to 100 PSI (1.4 to 6.9 bar)
• Izinga Lomsindo…………………….. ubuningi 87 dB

Izimfuneko:

Izidingo Zomthombo Womoya Ocindezelwe: Umoya ocindezelwe 60 kuya ku-80 PSI (4 kuya ku-5.5 ibha) ne-2 CFM (56.7 l/min). Iyunithi ngeke isebenze kahle uma umfutho womoya ongenayo ungaphansi kwama-40 PSI (2.7 bar). Izidingo Zamakhemikhali: Landela yonke imiyalelo evela kumkhiqizi wamakhemikhali kanye ne-Material Safety Data Sheet (MSDS).

Ubukhulu nesisindo

• Ubude ……………………………………… 18.5 in (470 mm) cishe
• Ububanzi ………………………………………. 22 ku-(559 mm) cishe
• Ubude ………………………………….. 46 in (1168 mm) cishe
• Isisindo (AFS-1E) …………………………. 77 lbs (35 kg) cishe
• Isisindo (AFS-1E-UPB) ………………… 80 lbs (37 kg) cishe
• Umthamo omkhulu wejeke (AFS-1E) ….. 6 gal (23 l) cishe
• Umthamo omkhulu wejeke (AFS-1E-UPB) … 2.4 gal (9 l) cishe

Amamodeli Wephampu Ye-Diaphragm Asetshenziswa Umoya Kabili Anikeziwe:

• P56: Umzimba we-polypropylene one-Santoprene diaphragm
• I-P56V: Umzimba we-polypropylene one-Viton diaphragm
• P56K: Umzimba we-polypropylene one-Kalrez diaphragm

Iphampu ye-Kalrez iyiphampu evamile. I-Santoprene ne-Viton yizici ozikhethela zona.

Kuhloswe ukusetshenziswa kwemishini

• Dlulisa uketshezi olusuka kumakhemikhali e-Ecolab (220l isigubhu/IBC) luye kumakani amancane (amathini e-Ecolab <30Kg noma ama-Ecolab User-Packs G2/G3).
• I-AFS-1E yokugcwalisa amathini e-Ecolab <30Kg ngokunikezwa kwamakhemikhali.
• I-AFS-1E-UPB yokugcwalisa i-Ecolab User-Pack G2/G3 kusukela ekuhlinzekeni kwamakhemikhali.
• Imikhiqizo ye-Ecolab kuphela evunyelwe ukugcwaliswa ngaphandle kwemikhiqizo ekhishwa yigesi noma evuthayo.
• Ukugcwaliswa kwephakheji eshiwo engenalutho yomkhiqizo ofanayo naleyo egcinwe endaweni yamakhemikhali

Qaphela: Lolu hlelo luklanyelwe ukugcwalisa uhlobo olulodwa lwekhemikhali / Iphakethe lomsebenzisi ngokungaguquki ukuya ezingeni elimisiwe. Ayakhelwe ukugcwalisa izinhlobo eziningi ze-can / User-Pack noma ikani elifanayo / Iphakethe lomsebenzisi emazingeni ahlukene.

IMIYALELO YOKUFAKA

• Ukuphakamisa iqembu kuyadingeka uma uphakamisa le yunithi. Hlela kahle ilifti. Qaphela lapho ulinganisa ukuthi iqembu lingathwala isisindo esingakanani.
• Wonke amalungu kufanele aqonde uhlelo lokuphakamisa nokuthi angayiqeda kanjani imisebenzi yawo ngokuphepha.

1. Susa zonke izingxenye ebhokisini lokuthumela.
2. Khetha indawo oyifunayo ukuze ukhweze i-AFS-1E/AFS-1E-UPB. I-AFS-1E/AFS-1E-UPB kufanele igxunyekwe odongeni olume olungekho ngaphezu kwamafidi angu-2 (61 cm) ukusuka phansi. Kungenzeka ukukhweza isistimu ibanga elingamafidi angu-30 (9 m) ukusuka emthonjeni wamakhemikhali kodwa kungcono kakhulu ukuba seduze ngangokunokwenzeka ukuze kuqinisekiswe ukukhishwa kwepompo kalula.
   • Gcina indawo ezungeze iyunithi icacile - kufanele okungenani kube namafidi angu-3.3 (1m) esikhaleni kwesokunxele nakwesokudla, namafidi angu-6.6 (2m) ngaphambi kweyunithi, njengoba kukhonjisiwe emdwebeni.
3. Kukhona ipayipi lepayipi lepulasitiki elimnyama elinamathiselwe ekugcineni komugqa wokumunca. Kusukela ngemuva kweyunithi, dlula lesi siphetho somugqa wokuncela kwenye yezimbobo ezingemuva kweyunithi. Sika i-hose barb ethekwini elingenalutho kupompo ye-P56/P56V/P56K. Shelelezisa isiqeshana sepompo siye kulayini wokuncela ukuze uvikele umugqa wokuncela. Gijimisa isiphetho esivulekile somugqa wokuncela eduze kwesinye sezikhala ngemuva kwe-AFS-1E bese uphumela ekunikezeni kwakho kwamakhemikhali.
4. Isikulufa i-PW1246-SL ku-HV60. I-PW1246-SL izohlala endaweni yakho yamakhemikhali.
5. Linganisa umugqa wokumunca owanele ukuze ufinyelele lapho kutholakala khona amakhemikhali futhi usike ubude obudingekayo. Ukusika umugqa wokuncela ube mude kancane kunalokho odingekayo kuyanconywa njengoba kuzoshiya indawo yokunamathisela kwi-lance yokudonsa. QAPHELA: Gcina wonke amapayipi ephansi futhi ngaphandle kwe-alway ukuze ugweme izingozi ezingase zibe khona.
6. Shelelezisa ibhande lesikulufu le-SSC12 ekugcineni komugqa wokuncela bese uphushela umugqa wokuncela kubha yepayipi le-HBEL1212. Vikela ngokuqinisa ibhande lesikulufu le-SSC12. Vula i-valve yebhola ye-HV60 ngaphambi kweyunithi yokusebenza.
7. Skrola isixhumi esisheshayo se-AP25-E kusihlungi somoya se-AF14 ohlangothini lwesobunxele lweyunithi.
8. Faka ishelufu le-SHF1814; iyunithi ye-AFS-1E/AFS-1E-UPB izohlala kuleli shelufu. Usebenzisa ileveli, maka izimbobo (4) zokukhweza ishalofu bese ubhoboza usebenzisa i-BIT38M 3/8 in. bitmasonry bit. Faka amahange odonga e-WMS516A awolintshi futhi uvikele ishalofu usebenzisa (4) izikulufu ze-WMS516X2 lag. Qaphela: Sebenzisa isokhethi engu-13 mm noma isikrufu sezikulufu ezilele.
9. Setha iyunithi ye-AFS-1E/AFS-1E-UPB eshalofini bese umaka (2) izimbobo ezikhwezwayo ezidlula ngemuva kweyunithi.
10. Khipha iyunithi ye-AFS-1E/AFS-1E-UPB bese ubhoboza izimbobo ezimakiwe (2) nge-BIT38M 3/8 in. Faka amahange odonga e-WMS516A awolintshi.
11. Setha iyunithi ye-AFS-1E/AFS-1E-UPB emuva eshalofini futhi uvikele iyunithi odongeni usebenzisa (2) WMS516X4 izikulufu ze-lag ezinde (2) namawasha e-FWLG516. Lezi zidlula izimbobo ezimbili kuyunithi ye-AFS-1E/AFS-1E-UPB. Qaphela: Sebenzisa isokhethi engu-13 mm noma isikrufu sezikulufu ezilele.
12. Qondanisa ubakaki we-L325-BRKT nezinto ezimbili ezingenalutho ezinentambo phezulu kweyunithi. Bamba ubakaki endaweni, bese umaka indawo yezimbobo ezimbili ezifakwa odongeni. Beka eceleni ubakaki we-L325-BRKT, bese ubhoboza izimbobo ezikhwezayo bese ufaka amahange odonga e-WMS516A awolintshi.
13. Namathisela ubakaki we-L325-BRKT ezintweni ezimbili ezingenalutho ezinentambo ngaphezulu kweyunithi ye-AFS-1E/AFS-1E-UPB usebenzisa (2) izikulufu ze-AS1. Lo bakaki uzosiza ukuvikela iyunithi odongeni.
14. Vikela ubakaki we-L325-BRKT usebenzisa (2) i-WMS516X2 lag screws. Sebenzisa le bracket ukudonsa iyunithi odongeni.

ISETHA IMIYALELO YEMODEL AFS-1E-UPB

1. Qondisa i-USPK-UBRKT ukuze iflenge ye-USPK-UBRKT ibe kolunye uhlangothi njengengono yokumunca ku-User-Pack. Qaphela: ingono yokumunca kufanele ibe sohlangothini olufanayo kuwo wonke amaphakethe Womsebenzisi ahloselwe ukugcwalisa. Amaphekhi omsebenzisi anezingono ezimuncayo afane ne-flange ye-USPK-UBRKT ngeke alingane futhi nesistimu ngeke ivuleke.
2. Xhuma umoya ocindezelwe ku-AFS-1E-UPB.
3. Setha isilawuli Sokucindezela Kwesistimu (ngakwesokudla) phakathi kuka-60-80 PSI (ibha engu-4.1 ukuya ku-5.6). Vula ukudayela ngezansi kwegeyiji ngokwewashi ukuze ukhuphule ingcindezi.
4. Qhubeka ngokuthi “SETHA ILEVELI YOKUGCWALA.”

ISETHA IMIYALELO YEMODEL AFS-1E

1. Hambisa i-PV-WHKR-VLV-ADJBRKT phezulu noma phansi ukuze ilingane nojeke oyifunayo. Uma ifakwe kahle, ujeke kufanele uthinte inaliti ye-PV-WHKR-VLV futhi uyigobe kancane.
2. Qinisa (2) izikulufu ze-AS1.
3. Xhuma umoya ocindezelwe ku-AFS-1E.
4. Setha isilawuli Sokucindezela Kwesistimu (ngakwesokudla) phakathi kuka-60-80 PSI (ibha engu-4.1 ukuya ku-5.6). Vula ukudayela ngezansi kwegeyiji ngokwewashi ukuze ukhuphule ingcindezi.
5. Qhubeka ngokuthi “SETHA ILEVELI YOKUGCWALA.”

UKUSETHA ILEVELI YOKUGCWALA

1. Beka i-jerry can / Umsebenzisi ku-AFS-1E/AFS-1E-UPB ngentamo/ikepisi eduze kwepayipi lekhemikhali.
2. Qaphela ukuphakama kokugcwalisa okufanele kwe-can / User-Pack.
3. Khulula intambo yokubamba ye-CGRP14K bese uslayida ngezansi kweshubhu yenzwa yeleveli eyiyintshi engu-1 (25mm) ngaphansi kwezinga lokugcwalisa olifisayo. QAPHELA: Ishubhu yezinzwa yeleveli ye-LST14 ivala isistimu lapho ithola ukucindezela emuva. Ukuphela kweshubhu kufanele kucwiliswe ngaphambi kokukhiqiza ukucindezela emuva.
4. Phinda uqinise intambo yokubamba ye-CGRP14K ngesikrufu.
5. Setha isilawuli se-Level Sensing (igeji yesokunxele) phakathi kuka-0.5 kuya ku-2 PSI. Guqula ukudayela ngezansi kwegeji ngokuphambene newashi ukuze ukhuphule ingcindezi.
6. Hlola uhlelo ngokugcwalisa ithini / Umsebenzisi-Pack ngamanzi.
   • QAPHELA: Uhlelo luzogcwalisa ngokungaguquki ikani / Iphakethe lomsebenzisi kule leveli yokusetha ngaphambilini.
7. Yenza ukuhlola ngekhemikhali ukuze uqinisekise ukuthi izinga le-LST14 leshubhu lokuzwa lilinganiswa ngendlela efanele nekhemikhali.

IMIYALELO YOKUSEBENZA

Njalo gqoka izinto zokuzivikela ezifanele (i-PPE) uma usebenzisa i-AFS-1E/AFS-1E-UPB.

1. Sebenzisa isibambo ukuze uqondise ishubhu lokugcwalisa ku-can / User-Pack yokuvula bese ubeka ikani elikhethiwe / Iphakethe lomsebenzisi ukuze libekwe.
2. Qinisekisa ukuthi i-can / User-Pack ibekwe ngendlela efanele endaweni yokubeka. I-\ can / I-User-Pack kumele icindezele i-whisker valve ukuze isebenze uhlelo.
3. Vala umnyango futhi uvikele i-latch.
4. Vula iswishi ethi “Amandla” emnyama iye endaweni ethi “I ” futhi isistimu izolungela ukwenziwa isebenze.
5. Cindezela inkinobho eluhlaza ethi “Qala” ukuze ugcwalise ikani / Iphakethe Lomsebenzisi liye ezingeni eliqokiwe. Uhlelo luzovala ngokuzenzakalelayo ezingeni eliqokiwe lokugcwalisa.
6. Inkinobho ebomvu ethi “E-Stop” ingasetshenziswa ukuvala isistimu ngokushesha uma kunesidingo.
7. Vula inkinobho "Amandla" emnyama iye endaweni ethi "O".
8. Vula umnyango. Bamba isibambo seshubhu yokugcwalisa ngenkathi ukhipha ngobumnene ithini / Iphakethe Lomsebenzisi ku-rack.
9. Ngenxa yensalela yamakhemikhali esele ku-fill tube, gwema ukuthinta ishubhu yokugcwalisa.

ISAZISO:

• Uma umnyango uvulwa ngenkathi uhlelo lugcwalisa, uhlelo luzovala.
• Isistimu ngeke ivuleke ngaphandle kokuthi i-can / User-Pack ibekwe kahle endaweni yokubeka.
• uma i-can / User-Pack ibekwe neleveli yoketshezi ephakeme kuneleveli yokugcwalisa esethiwe, iyunithi ngeke isebenze lapho inkinobho ethi "Qala" iphushwa.
• Kunconywa ukugeza uhlelo kahle ngamanzi kanye ngesonto.

buyisela esikhundleni UKUNIKEZELWA KWAKHEMICAL ENGENALUTHO

Njalo gqoka izinto zokuzivikela ezifanele (i-PPE) uma usebenzisa i-AFS-1E/AFS-1E-UPB.

1. Qiniseka ukuthi amandla aku-“ O” endaweni.
2. Vala i-valve yebhola ye-HV60.
3. Khipha i-lance lance ekuphakeleni kwamakhemikhali angenalutho bese uyibeka endaweni egcwele amakhemikhali. ISAZISO: Gwema ukuthintana namakhemikhali.
4. Misa kahle ukunikezwa kwamakhemikhali okugcwele.
5. Vula i-valve yebhola ye-HV60.

UKUSHINTSHA UMKHIQIZO WEKHEMICAL

Gqoka njalo okokuvikela uma ushintsha imikhiqizo yamakhemikhali.

QAPHELA: Akunconywa ukushintsha umkhiqizo. Umshini uhloselwe ukusetshenziswa nomkhiqizo owodwa kuphela. Uma kwenzeka ushintsho lomkhiqizo landela imiyalo engezansi.

1. Khipha i-lance edonsa kukhemikhali.
2. Usebenzisa ikani / Iphakethe Lomsebenzisi elifanelekile, hlambulula uhlelo kahle ngamanzi.
3. Faka i-lance edonsayo esigubhu samakhemikhali esisha.
4. Zungezisa isistimu kuze kukhishwe noma yimaphi amanzi asele futhi kukhishwe ikhemikhali ekhethiwe kuphela.
5. Qinisekisa ukuthi izinga lokugcwalisa lilungile.

Isondlo

Gqoka njalo izisetshenziswa zokuvikela ezifanelekile (i-PPE) lapho uhlinzeka ngeyunithi. Kungase kube namakhemikhali ohlelweni. Geza uhlelo ngamanzi anele ukuze ukhiphe amakhemikhali asele.

Prakthiza Ukunakekela Okufanelekile Kokuvikela:

• Hlanza futhi uhlanze i-drip pan masonto onke.
• Shintshanisa ipayipi le-H12B ne-H12CB njalo ezinyangeni eziyisi-6 uma ikhemikhali edluliswayo iqukethe isithako esisodwa noma ngaphezulu kwezilandelayo:
  • NaOH
  • I-KOH
  • I-H2O2
  • HNO3
  • I-H2SO4
  • I-acetic acid
  • I-Peracetic acid
  • I-Peroxyoctanoic acid
  • Ama-surfactants

Sicela ubheke Ishidi Ledatha Yomkhiqizo elivela kumnikezeli wakho wamakhemikhali ukuze uhlonze izithako emkhiqizweni noma ubuze uchwepheshe wohlelo lwakho lokusebenza lwe-Ecolab.

UKUXOXA IZINKINGA

Njalo gqoka izinto zokuzivikela ezifanele (i-PPE) lapho uxazulula inkinga.

Iyunithi ayiqali inqubo yokugcwalisa

1. Hlola ukuthi ithini / Iphekhi yomsebenzisi ibekwe ngokuqinile phezu kwevalve yewhisker. Uma ithini / Iphakethe lomsebenzisi lingawubambi i-whisker valve uvule uhlelo ngeke lusebenze. Uma i-valve igotshiwe kungase kudingeke ukuthi iqondiswe ngokuyibuyisela endaweni yayo ukuze ikani / Iphakethe lomsebenzisi lixhumane kahle nevalve yewhisk.
2. Hlola umnyango. Uhlelo ngeke lusebenze uma umnyango ungavalwanga kahle. Kukhona isishintshi somoya sesibili esidinga ukuthintwa ukuze iyunithi isebenze kahle.
3. Uma umnyango uvaliwe, vula isiteshi sokugcwalisa. Hlehlisa izikulufu zesithupha ebhokisini lokulawula ukuze ufinyelele izilawuli. Igeji engakwesokudla kufanele ifunde 60 kuya ku-80 PSI (4.1 kuya ku-5.6 ibha). Uma kungekho ngcindezi ekhonjiswayo, vala isistimu bese uqhubekela kokuthi Akukho Ukucindezela Okutholiwe, ngezansi. Uma ingcindezi ilungile, yeqela kokuthi Kutholwe Ingcindezi.

Akukho Ingcindezi Etholiwe

1. Lungisa isilawuli ngezansi kwegeji kwesokudla.
2. Hlola ukuxhumana kwe-Air In. Vula umnyango bese uhlola imigqa egijima ku-switch yomnyango futhi kusukela ekushintsheni komnyango kuya ebhokisini lokulawula. Lo mugqa ubhalwe ukuthi “AIR IN” ebhokisini lokulawula.
3. Hlola isistimu yakho yomoya ecindezelwe.

Ingcindezi Itholakele

1. Hlola ukuthi iswishi yomnyango ingacindezeleka yini. Kufanele inyakaze lapho icindezelwe futhi ibuyele endaweni yayo yokuphumula lapho ikhululwa.
2. Qiniseka ukuthi iswishi yesicabha sidangele ngokugcwele lapho umnyango usesimweni esivaliwe. Uma ubakaki ugobile iswishi ingase ingaxhumani nomnyango futhi ubakaki kuzodingeka ukuthi ulungiswe ukuze uthinte umnyango lapho umnyango uvaliwe.
3. Uma uhlelo luvaliwe, vula ibhokisi lokulawula futhi uqinisekise ukuthi wonke amashubhu axhumeke ngendlela efanele futhi ngokuvikelekile. Futhi, hlola ukuxhumana komoya ngemuva kwe-whisker valve kanye nokuxhumana komoya kusuka ebhokisini lokulawula ukuya epompo. Qinisekisa ukuthi imigqa yomoya ayinqanyuliwe.
4. Qinisekisa ukuthi ishubhu yezinzwa yeleveli ye-LST14 ayixhunyiwe noma ayixhunyiwe. I-PSI kusilawuli senzwa yezinga (etholakala ebhokisini lokulawula) kufanele isethelwe ku-0.5 kuya ku-2 PSI. Uma isilawuli sisethelwe phansi kakhulu uhlelo ngeke lukhiphe amakhemikhali.

I-Can / User-pack ayigcwaliswa ngokuphelele

1. Hlola ubude beshubhu yezinzwa yeleveli ye-LST14.
2. Hlola amazinga amakhemikhali.

I-Can / Iphekhi yomsebenzisi igcwaliswa ngokweqile

1. Qiniseka ukuthi ishubhu yezinzwa yeleveli ye-LST14 ingaphakathi kwephekhi lekani/lomsebenzisi. Uma ingaphandle kwe-can / User-pack ngeke ilithole izinga.
2. 2. Hlola ubude beshubhu yezinzwa yeleveli ye-LST14. Kufanele ibe ngu-1 ku-(2.5 cm) ngaphansi komugqa ogcwele we-can / User-pack lapho ishubhu lokugcwalisa likuphekhi yekani / yomsebenzisi.
3. 3. Hlola igeji yesokunxele ngaphakathi kwebhokisi lokulawula. Kufanele isethelwe ku-0.5 kuya ku-2 PSI. Uma isethwe ngaphezu kuka-2 PSI uhlelo ngeke luvaleke kahle.

Umoya udlula empompini, kodwa awukhiphi amakhemikhali

1. Qinisekisa ukuthi i-valve yebhola ye-HV60, etholakala phezulu kwerensi yokumunca, isendaweni evulekile.
2. Iphampu kufanele ishintshwe.

Ukushintsha iphampu

Njalo gqoka izinto zokuzivikela ezifanele (i-PPE) lapho ushintsha iphampu. Kungenzeka kube namakhemikhali asekhona ohlelweni.

1. Hlanza uhlelo kahle ngamanzi ukuze ukhiphe amakhemikhali asele.
2. Vala uhlelo.
3. Nqamula umugqa womoya obomvu empompini.
4. Nqamula umugqa wokumunca empompini.
5. Hlehlisa izikulufu ezingu-3 ngasemphethweni ophansi wepuleti elimnyama.
6. Khipha ngokucophelela ipuleti ngokukhipha umphetho ongezansi, bese wehlisa.
7. Nqamula umugqa wokukhipha amakhemikhali empompini.
8. Susa izikulufu ezingu-4 ezibambe iphampu epuleti.
9. Faka iphampu eshintshayo ngokulandela izinyathelo 3 ukuya kwezi-8 ngokuhlehla.

INDLELA

UMHLANGANO

UMHLANGANO WOMNYANGO

IBHODI LEMUVA

PHELILEVIEW

IBHOKISI LOKULAWULA: ISEVA PHAMBILI VIEW

IBHOKISI LOKULAWULA: NGAPHAKATHI VIEW

UMHLANGANO

UKUKHUTHAZA IZINDAWO ZOKUPHAKATHI

1. AF14
2. I-B4WV18 (1) + i-AIRBTNGRN inhlangano
3. I-B4WV18 (2) + PV-TBNC-18 inhlangano
4. I-AFS-CTRL-BRD
5. I-BSV18 (1)
6. I-PV-BNC-18-GR
7. I-PV-BNC-18-RD
8. I-BSV18 (2)
9. I-PV-WHKR-VLV
10. Ishubhu yenzwa yezinga
11. P56K
12. Isilawuli Senzwa Yezinga
13. I-System Pressure Regulator
14. I-Level Sensor Gauge
15. I-System Pressure Gauge
16. I-PV-1
17. I-PV-2P
18. I-Valve Yomkhawulo
19. Inzwa Yezinga

IZIQEPHU

DESCRIPTION

INTO NUMBER	DESCRIPTION
AF-14	ISIHLUNGI SOMOYA – 1/4 FPT -25 ISIHLUNGI SE-MICRON
I-AFS-BODYBL	I-BASE FOR AFS UNITS
I-AFS-CTRL-BRD	IBHODI LOKULAWULA LE-AFS
AFS-DOORBL	UMNYANGO OBLUE WE-AFS UNITS
I-AFS-GRATE	I-AFS DRIP PAN GRATE [REV 1]
I-AFS-PAN	I-PAN YOKUQOQA AMAyunithi e-AFS
I-AFS-WINDOW	28×15 3/16 I-PVC ESILE
I-AIRBTNGN	INKINOBHO YOKUPHUSHA YOMOYA OKULUHLAZA
I-AP25-E	I-AIR PLUG (EUR) – 1/4 MPT X PLUG
AS1	1/4-20 X 1/2 PHIL TRUSS M/S, S/S
B10321	10-32 X 1 PHIL TRUSS MACH SCR 18-8
B103225	10-32 X 1/4in PHIL MACH SCREW 18-8
B103234	10-32 X 3/4 PHIL TRUSS MACH SCR 18-8
B38162	I-HEX HEAD BOLT 3/8-16X2 18-8SS
I-B4WV18	IMIGOMO YETHUSI 4-INDLELA EYI-1/8 Iinch PORTS
I-B8X58	8-15 X 5/8 intshi PHIL FLAT TY-A 316 SS
I-BIT38M	3/8 X 6 I-MASONRY DRILL BIT
I-BSV18	I-BRASS SHUTTLE VALVE 1/8 Iinch PORTS
I-CGRP14K	I-CORD GRIP 1/4 Inch KYNAR
Idatha ye-CV1438T-3	426-4MGB-F, 3 LB HASTELLOY
EC18	Inkampani OETIKER CLAMP - 11.3
FB1187	I-FIBOX 11X7.5X7.1
I-FT-HNDL	ISIBAMBA SETHUBU ESINGAGCWALI [ISAMBULO 1]
FW14	1/4 X 5/8 OD FLAT WASHER 18-8 PLN
FW38X78	I-FLAT WASHER 3/8X7/8 X.050
I-FWLG14	.569 ID X 1.28 OD X .08 THICK FLAT WASHER SS 18-8
I-FWLG516	5/16” ID I-ID ye-Stainless fender washer, 1.5” OD 18-8SS
FWP12	7/8 ID X 1.5 OD X 0.05 THK SSFW
FWP78	7/8in BY .137 BY 1 1/4in FLTWASHER 18-8 PLN
I-H12B	1/2in EBLUE PLIVIC HOSE - Itholakala ngeft.
I-H12-BRKT	I-AFS Gcwalisa I-HOSE BRACKET [REV 1]
I-H12CB	1/2 IN (ID) CLEARBRAID RF SERIES – Itholakala ngeft.
I-H14B	1/4 ku-BLUE PLIVIC HOSE - Itholakala ngeft.
I-H14KT	1/4 E-Kynar PVDF TUBING – Itholakala ngeft.
I-H14TU	I-Translucent Green Polyurethane .25ODx.17ID – Itholakala ngeft.
I-HB1412	1/4in MPT X 1/2in YEHOSE IBHA
I-HBBL103217	I-MINI HOSE ARB – 10-32X.17 EL
I-HBSS1212	IBHABHA LEHHOSI ELINGINGAGQI 1/2 X 1/2
I-HBSS14P	IBHABHA LEHHOSI LESIBILI ESINGAGQI 1/4 Iinch – NGE-P56
I-HBSSEL1212	304 SS 1/2in MPT NGO-1/2 ku-HB ELBOW
HV60	I-1/2in IVVVVELI YEBHOLA ENGAGQI – w/ INUTI ELISHISELWE

INTO NUMBER	DESCRIPTION
I-L325-BRKT	UBAKAKI WE-Stainless Steel EL NEZIMBOBO EZINE [ISAMBULO 1]
I-LN14	1/4-20 NE NYL INS LOCKNUT 18-8 PLN
P56K	I-5700 PUMP ENE-KALREZ SEALS - IHLANGANISA IZINDABA ZAMAHHOSI, UKUFAKA komoya, KANYE NE-AIR PORT
I-PL-AFS	I-AFS Plate, ¼ ku-PP emnyama
I-PV-1	I-PULSE VALVE #10-32 VULA 3-WAY VALVE
I-PV-BNC-GR-18	PNEUMATIC PUSH-BUTTON – ELILUHLAZA – 1/8 FPT- 3 IMBOBO EVAMILE
I-PV-BNC-RD-18	PNEUMATIC PUSH-BUTTON – RED – 1/8 FPT- 3 PORT EVAMILE
I-PVC-DR-PIN-3/8	IPHINIKHODI YOmnyango we-PVC 3/8 DIAMETER X 1 9/16 AMAIntshi AYIBUDE
I-PV-TBNC-18	INKINOBHO YOKUKHETHA I-PNEUMATIC TWIST – 1/8 FPT- 3 PORT EVAMILE
I-PV-TBNC-18A	I-ADAPTER YE-CLIPPARD ACTUATOR
I-PV-WHKR-VLV	PNEUMATIC WHISKER VALVE – 1032 FEM PORT – BRASS – AFS JUG SENSOR
PW1248-120	1/2in BLACK POLY PRO X 48in – SCH.120 – 1/2in MPTOE & 1/4 ku-FPTOE
PW12F	1/2 Inch X 1/2 Inch POLYPRO SCHE 120 EMNYAMA FPTX FPT
QF103214	ISIXHUMANISI SESILISA #10-32 BY 1/4IN TUBE PUSH IN
QF14P	MALE CON. 1/4in TUBE X 1/4in MPT POLYPROPYLENE
QF18	MALE CON. 1/4in X 1/8in MPT IBRASS
QF1814	ISIXHUMANISI SESILISA 1/8in NPT BY 1/4in TUBE POLYPROPYLENE
I-QFA1414K	1/4in TUBE X 1/4in I-HOSE STEM – KYNAR
I-QFEL1814	IFIKE ELBOW 1/8in MPT X 1/4in TUBE – POLYPROPYLENE
QFU14	UNION CON. 1/4in TUBE – POLYPROPYLENE
I-S1034FHL	10 X 3/4 PHIL FLAT HI-LO THRD SCREW 18-8
S142034	1/4-20 X 3/4 PHIL TRUSS M/S 18-8
I-SEL12F	I-SS ELBOW 1/2in FPT X 1/2in FPT
SHF1814	Ishalofu elingu-18 X 14 intshi le-Wall mounting AFS-1E [REV 1]
I-SS1B2WV-BRKT	UBAKASHI WEMVVVU YOMOYA YETHUSI EZINJINI EZIMBILI [ISAMBUSO 1]
I-SSA14	I-SS304 I-ADAPTER YESIBILI/WESIFAZANE 1/4 NPT X 1/4 NPT
SSC12	IGCOKAMA ZEZIMBUNDU CLAMP, S/S (.31-.91)
I-SSE12	STREET ELBOW 1/2in – 316 SS
I-SSK2H	I-Stainless Steel KEEper - 2 HOLE MOUNTING
I-SSL2.25	I-LATCH YE-Stainless Steel – 2.25in DRAW – ELECTROPOLISHED – PADLOCKING
I-TLCLAMP12	I-Tefzel Loop Clamp ngo-1/2” Ububanzi bangaphandle
I-USPK-BRC	I-BRACE FOR USER PACK AFS-1-E [REV 1]
I-USPK-SHF	Ishalofu le-UserPack le-AFS-1E [REV 1]
USPK-UBRKT	I-U-BRACKET YOMSEBENZISI I-AFS-1-E [REV 1]
I-WMS516A	ihange lodonga lukakhonkolo, usayizi wokubhoboza ongu-3/8 wamayintshi angu-5/16, 2.5 in. ubude
I-WMS516X2	5/16 X 2 KU-stainless lag bolt, w/hex head 18-8SS
I-WMS516X4	IZIKRUWU ZAMA-WALL MOUNT 5/16 X 4

ULWAZI LOKUXHUMANA

I-Ecolab Austria

• Erdbergstrasse 29
• 1030 Wien
• Ifoni: 43 1 715 25 50
• Ifeksi: 43 1 715 25 50 2850

E-Ecolab Germany

• I-Ecolab Deutschland GmbH
• I-Ecolab-Allee 1
• 40789 Monheim am Rhein
• Ifoni: 49 2 173 599 0

I-Ecolab United Kingdom

• UDavid Murray John Building
• Swindon, Wiltshire
• I-SN1 1NH
• Ifoni: 44 1793 51 12 21
• Ifeksi: 44 1793 61 85 52

I-Ecolab Turkey

• Altaycesme Mah.
• I-Toygun Sok. Cha:1
• 34843 Maltepe-Istanbul
• Ifoni: 90 216 441 20 30
• Ifeksi: 90 216 441 14 35

E-Ecolab Netherlands

• I-Epenhoeve 7
• 3438 MR Nieuwegein
• E-Netherlands
• Ucingo: 31 30 6082 222
• Ifeksi: 31 30 6082 228

I-Ecolab Ireland

• Izindlu e- La Vallee
• Upper Dargle Road
• Bray, Co. Wicklow
• Ucingo: 353 1 2763500
• Ifeksi: 353 1 2869298

Amadokhumenti / Izinsiza

I-ECOLAB AFS-1E Isiteshi Sokugcwalisa Okuzenzakalelayo [pdf] Imaniwali yosebenzisayo AFS-1E, AFS-1E Isiteshi Sokugcwalisa Ngokuzenzakalelayo, Isiteshi Sokugcwalisa Okuzenzakalelayo, Isiteshi Sokugcwalisa, Isiteshi

Izithenjwa

• Imaniwali yosebenzisayo