I-Eccel C1 Pepper Module
Imininingwane
- Imodeli: Pepper C1 Module
- Inguqulo eyenziwe ngesandla: V1.51 03/07/2024
Imiyalo yokusetshenziswa komkhiqizo
Idivayisi Iphelileview
I-Pepper C1 Module iyisinqumo esihle kubasebenzisi abafuna ukwengeza ngokushesha ukusebenza kwe-RFID kumiklamo yabo.
Ukucaciswa kukagesi
- Izilinganiso Eziphelele Eziphelele:
- Ukushisa Kwesitoreji: -40°C ukuya +125°C
- I-Ambient Temperature: -40°C ukuya +85°C
- I-Supply Voltage: 3V ukuze 3.6V
- Izimo zokusebenza:
- Izinga Lokushisa Lokusebenza: -25°C ukuya +85°C
- Ukuswakama: 5% ukuya ku-95%
- I-Supply Voltage: 3.3V ukuze 5.5V
Izimpawu ze-DC
- Okokufaka Voltage:
- Okokufaka Kwezinga eliphezulu Voltage: 0.75 x VDD kuya ku-VDD + 0.3V
- Okokufaka kwezinga eliphansi Voltage: 0 kuya -0.3 x VDD V
- Okukhipha Umqtage:
- Okukhiphayo Kwezinga eliphezulu Voltage: 0.8 x VDD V
- Okukhiphayo kwezinga eliphansi Voltage: -0.3 x VDD V
Ukusetshenziswa Kwamanje (3.3V kumaphini 1 no-8)
| Uphawu | Ipharamitha | Thayipha. |
|---|---|---|
| IPN_RFOFF_AP | I-RF ivaliwe (AP) | 135 |
| IPN_RFON_AP | Inkundla ye-RF ivuliwe (AP) (500 ms polling) | 145 |
FAQ
Q: Ngingayithola kuphi inguqulo yakamuva yebhukwana lomsebenzisi?
A: Incwadi entsha yomsebenzisi ingatholakala kwethi webindawo ku https://eccel.co.uk/wpcontent/downloads/Pepper_C1/Pepper_C1_Module_user_manual.pdf
I-Pepper C1 Module Incwadi Yomsebenzisi
Inguqulo eyenziwe ngesandla: V1.51
03/07/2024
1 Incwadi yomsebenzisi entsha kakhulu ingatholakala kwethi webindawo: https://eccel.co.uk/wp-content/downloads/Pepper_C1/Pepper_C1_Module_user_manual.pdf
Isingeniso
Idivayisi Iphelileview
Izici
- I-RFID Reader ebiza kancane ene-MIFARE® Classic® ku-1K, inkumbulo engu-4K, ICODE, MIFARE Ultralight®, MIFARE DESFire® EV1/EV2, usekelo lwe-MIFARE Plus®
- Ukuxhumana okungenantambo:
- I-Wi-Fi: 802.11 b / g / n
- 2.4GHz ukuxhumana okungenantambo (WPAN)
- ingakhutshazwa ngumsebenzisi
- Yakhelwe ngaphakathi Web Isixhumi esibonakalayo
- Izibuyekezo zesikhathi sokuphila Emoyeni
- Isixhumi esibonakalayo somyalo nge-UART ne-TCP socket
- Izinga le-UART baud lifika ku-921600 bps
- 6 ama-GPIO alungisekayo
- Imodi yokuma wedwa (ukuvota)
- Izixhumanisi ze-IoT: MQTT, WebI-Socket, i-REST API, iKlayenti/Iseva ye-TCP
- Ijubane eliphezulu lokufunda nokubhala nge-transponder
- -25°C kuya ku-85°C uhla lokusebenza
- Ireferensi yangaphakathi eminingi voltages
- I-RoHS iyahambisana
- Inguqulo ye-FCC iyatholakala
Izinhlelo zokusebenza
- Ukulawula ukufinyelela
- Ukuqapha izimpahla
- Ukugunyazwa nokuqapha izinto ezisetshenziswayo
- Izinhlelo zokukhokha kusengaphambili
- Ukuphatha izinsiza
- Amasistimu okugcina idatha angaxhunywanga
- Ukuhlolwa nokuthuthukiswa kwezinhlelo ze-RFID
Incazelo
Imojuli ye-Pepper C1 ingomunye womndeni wemikhiqizo ye-Eccel Technology Ltd (IB Technology) enoxhumo olungenantambo nge-Wi-Fi 802.11b/g/n kanye ne-WPAN (2.4GHz). Ngenxa yalokhu, ikhasimende lithola izibuyekezo zamahhala ze-Over-the-Air, futhi iphrothokholi yokuxhumana ingasetshenziswa nge-TCP esikhundleni sesixhumi esibonakalayo se-UART/USB. Ukuhlanganisa lezi zici nemodi ezimele kunikeza idivayisi elungele ukusetshenziswa ezinhlelweni eziningi "ngokuphuma ngaphandle kwebhokisi." Kumodi ezimele, imojuli ingahlanganiswa kalula nezinhlelo ze-IoT ngenxa yezivumelwano eziningi ze-IoT njenge-MQTT, i-REST API, amasokhethi e-TCP nokuningi.
Ngakho-ke, lokhu ukukhetha okuhle kokuklama uma umsebenzisi efisa ukwengeza amandla e-RFID ekwakhiweni kwawo ngokushesha futhi ngaphandle kokudinga i-RFID ebanzi nobungcweti besoftware eshumekiwe nesikhathi. I-microcontroller ethuthukisiwe futhi enamandla engu-32-bit iphatha ukusetha kwe-RFID futhi inikeze umsebenzisi isixhumi esibonakalayo esinamandla kodwa esilula somyalo ukuze kube lula ukufinyelela okusheshayo nokulula kokufunda/ukubhala kumemori nezici zama-transponder ahlukahlukene asekelwa yile mojula.
Ukucaciswa kukagesi
Izilinganiso eziphezulu eziphelele
Ukucindezeleka okungaphezu kobukhulu bezilinganiso eziphelele ezibalwe kuthebula elingezansi kungase kubangele umonakalo unomphela kudivayisi. Lezi izilinganiso zokucindezeleka kuphela, futhi azibhekiseli ekusebenzeni komsebenzi wedivayisi okufanele kulandele izimo zokusebenza ezinconyiwe.
| Uphawu | Ipharamitha | Okuncane | Ubukhulu | Iyunithi |
| TS | Izinga lokushisa lesitoreji | -40 | +125 | °C |
| TA | Izinga lokushisa le-ambient | -40 | +85 | °C |
| I-VDDMAX | Ukunikezwa kwevoltage (Iphinikhodi 8) | 3 | 3.6 | V |
Ithebula 2-1. Izilinganiso eziphezulu eziphelele
Izimo zokusebenza
| Uphawu | Ipharamitha | Okuncane | Thayipha. | Ubukhulu | Iyunithi |
| TS | Izinga lokushisa lokusebenza | -25 | 25 | +85 | °C |
| H | Umswakama | 5 | 60 | 95 | % |
| I-VDD | Ukunikezwa kwevoltage (Iphinikhodi 8) | 3 | 3.3 | 3.6 | V |
| I-VRFID | I-RFID supply voltage (Iphinikhodi 1) | 3 | 3.3/5 | 5.5 | V |
Ithebula 2-2. Izimo zokusebenza
Izici ze-DC (VDD = 3.3V, TS = 25 °C)
| Uphawu | Ipharamitha | Okuncane | Thayipha. | Ubukhulu | Iyunithi |
| VIH | Umthamo wokufakwayo wezinga eliphezulutage (Noma iyiphi i-GPIO) | 0.75 x VDD | - | I-VDD + 0.3 | V |
| VIL | Ivolumu yokufaka yezinga eliphansitage (Noma iyiphi i-GPIO) | 0 | - | 0.3 x VDD | V |
| VOH | Ivolumu yokukhishwa kwezinga eliphezulutage (Noma iyiphi i-GPIO) | 0.8 x VDD | - | - | V |
| I-VOL | Ivolumu yokukhishwa kwezinga eliphansitage (Noma iyiphi i-GPIO) | - | - | 0.3 x VDD | V |
Ithebula 2-3. Izimpawu ze-DC
Ukusetshenziswa kwamanje (3.3V kumaphini 1 no-8
| Uphawu | Ipharamitha | Thayipha. | Ubukhulu | Iyunithi | ||
| I-Wi-Fi ivuliwe | Imodi yePhoyinti lokuFinyelela | IPN_RFOFF_AP | I-RF ivaliwe (AP) | 135 | 155 | mA |
|
IPN_RFON_AP |
Inkundla ye-RF ivuliwe (AP) (500 ms polling) | 145 | 165 | mA | ||
| Inkundla ye-RF ivuliwe (AP) (200 ms polling) | 155 | 175 | mA | |||
| Imodi yesiteshi | IPN_RFOFF_STA | I-RF ivaliwe (STA) | 60 | 80 | mA | |
|
IPN_RFON_STA |
Inkundla ye-RF ivuliwe (STA) (500 ms polling) | 70 | 90 | mA | ||
| Inkundla ye-RF ivuliwe (STA) (200 ms polling) | 80 | 100 | mA | |||
| I-Wi-Fi Ivaliwe | IPN_RFOFF | Inkambu ye-RF ivaliwe | 55 | 75 | mA | |
|
IPN_RFON |
Inkundla ye-RF ivuliwe (500 ms polling) | 60 | 80 | mA | ||
| Inkundla ye-RF ivuliwe (200 ms polling) | 65 | 85 | mA | |||
| I-IDSM | Imodi Yokulala Ejulile | 90 | 100 | uA | ||
Ukusetshenziswa kwamanje (3.3V kuphinikhodi 8 kanye ne-5V kuphinikhodi 1)
|
Uphawu |
Ipharamitha |
VDD = 3.3V | VI-RFID = 5V |
Iyunithi |
||||
| Thayipha. | Ubukhulu | Thayipha. | Ubukhulu | |||||
| I-Wi-Fi ivuliwe | Imodi yePhoyinti lokuFinyelela | IPN_RFOFF_AP | I-RF ivaliwe (AP) | 135 | 155 | 0* | 0* | mA |
|
IPN_RFON_AP |
Inkundla ye-RF ivuliwe (AP) (500 ms polling) | 136 | 156 | 12 | 22 | mA | ||
| Inkundla ye-RF ivuliwe (AP) (200 ms polling) | 137 | 157 | 25 | 35 | mA | |||
| Imodi yesiteshi | IPN_RFOFF_STA | I-RF ivaliwe (STA) | 60 | 80 | 0* | 0* | mA | |
|
IPN_RFON_STA |
Inkundla ye-RF ivuliwe (STA) (500 ms polling) | 62 | 82 | 12 | 22 | mA | ||
| Inkundla ye-RF ivuliwe (STA) (200 ms polling) | 63 | 83 | 25 | 35 | mA | |||
| I-Wi-Fi Ivaliwe | IPN_RFOFF | Inkambu ye-RF ivaliwe | 55 | 75 | 0* | 0* | mA | |
|
IPN_RFON |
Inkundla ye-RF ivuliwe (500 ms polling) | 57 | 77 | 12 | 22 | mA | ||
| Inkundla ye-RF ivuliwe (200 ms polling) | 58 | 78 | 25 | 35 | mA | |||
| I-IDSM | Imodi Yokulala Ejulile | 90 | 100 | 0* | 0* | uA | ||
Ukuqalisa
IO kanye nama-peripherals
I-R7 – ngokuvamile ayigcwali ngenxa yokuthi uxhumano lwe-antenna oluzenzakalelayo luyisixhumi se-I-PEX ukuze umsebenzisi engeze uthi lwe-Wi-Fi lwangaphandle. Lesi resistor sisetshenziselwa ukuxhuma i-antenna ye-Wi-Fi yangaphandle ukuze uphine u-nr 10 lapho isixhumi se-I-PEX esisebhodini singasetshenziswa. Inani elinconyiwe 0 Ohm. Uma i-resistor engu-0 Ohm ingezwa ku-R7 ngumsebenzisi, uxhumano lwe-antenna ludluliselwa ku-pin 10 ukuze kuxhunywe kalula othingo lwengoma lwe-ex.ample ebhodini lomama lomsebenzisi.
I-R8 - ngokuvamile ayinabantu. Ingasetshenziswa uma ingxenye ye-RFID izonikwa amandla kusukela ku-3.3V eyinhloko kumaphini angu-nr 8 kanye no-nr 9. Inani elinconyiwe 0 Ohm. Ngokusebenza okungcono kakhulu kwe-RFID, i-Eccel incoma ukuthi isekethe ye-antenna ye-RFID inikwe amandla ekuphakeleni okuhlukile kwe-5V ngephinikhodi 1 yemojuli. Nokho, uma i-resistor engu-0 Ohm ifakwe ku-R8, khona-ke imojuli izosebenzisa uxhumano lwayo lokuphakela amandla okungu-3.3V ukusuka ku-Pin 8 ukuze iphinde inike amandla isekethe ye-antenna ye-RFID. Ukusebenza kwe-RFID kuzoncishiswa kuleli cala.
Incazelo ye-Pinout
| Inombolo | Igama | Incazelo |
|
1 |
I-VRFID |
Kunconyiwe ukunikezwa kwe-dc elawulwayo engu-5V. Iphinikhodi yokunikeza amandla yesigaba se-RFID. Ingashiywa ingaxhumekile uma i-R8 isigcwele.
I-RFID izobe isinikwa amandla kusukela ekunikezeni okukhulu kwe-3.3V okufakwe kuphinikhodi. 8 |
| 2 | I-GPIO2 | Iphinikhodi yokudlulisa idatha ye-UART2 |
| 3 | I-GPIO0 | Iphinikhodi yenkinobho |
| 4 | I-GPIO4 | Iphinikhodi yokuthola idatha ye-UART2 |
| 5 | TX0 | Iphinikhodi yokudlulisa idatha ye-UART0 |
| 6 | RX0 | Iphinikhodi yokuthola idatha ye-UART0 |
| 7 | SETHA KABUSHA | Iphinikhodi yokusetha kabusha ephansi esebenzayo |
| 8 | I-VDD | Ukunikezwa kwamandla amakhulu - inani elinconyiwe elingu-3.3V |
| 9 | GND | Ground |
|
10 |
I-Wi-Fi ANT |
Phina uxhumano lwe-antenna yangaphandle. Itholakala uma sekugcwele u-R7. Ungasebenzisi uma kusetshenziswa isixhumi se-antenna esebhodini |
| 11 | GPI34 | Iphinikhodi Yokufaka Injongo Ejwayelekile No. 34/I-Analog/Okokusetshenziswa esikhathini esizayo |
| 12 | GPI35 | Iphinikhodi Yokufaka Injongo Ejwayelekile No. 34/I-Analog/Okokusetshenziswa esikhathini esizayo |
| 13 | I-GPIO26 | Iphinikhodi yokufaka yenhloso evamile 26 |
| 14 | I-GPIO14 | Iphinikhodi yokufaka yenhloso evamile 14 |
| 15 | I-GPIO12 | UART2 RS485 DE iphinikhodi |
| 16 | I-GPIO13 | Iphinikhodi ye-UART2 RS485 RE |
| 17 | I-GPIO15 | Iphinikhodi yokufaka yenhloso evamile 15 |
| 18 | GND | Indawo ye-RFID Antenna. Ingaxhunywa endaweni eyinhloko lapho kusetshenziswa uthi lwe-RFID olusebhodini |
| 19 | I-RFID ANT2 | Inombolo yesignali ye-antenna ye-RFID. 2. Ungasebenzisi uma usebhodini
Kusetshenziswa isixhumi se-antenna. |
| 20 | I-RFID ANT1 | Inombolo yesignali ye-antenna ye-RFID. 1. Ungasebenzisi uma kusetshenziswa isixhumi sothi esisebhodini. |
Ukuxhumana okujwayelekile nokusetshenziswa
I-Pepper C1 Module ingaxhunywa kumsingathi (ikhompyutha noma enye idivayisi) kusetshenziswa i-UART0. Ukuze uxhume imojuli kukhompuyutha, isiguquli se-USB siye ku-UART sizodingeka.
Ngokuzenzakalelayo, lesi sikhombimsebenzisi se-UART0 singasetshenziselwa ukuxhumana kusetshenziswa iphrothokholi kanambambili echazwe ngezansi.
I-Reader nayo ine-UART2 etholakalayo. Ngokusebenzisa lolu xhumano, umsebenzisi angakwazi view amalogi okukhiphayo aqukethe ulwazi olwengeziwe mayelana nemiyalo yokukhipha yesikhashana. Ukucushwa okuzenzakalelayo yilokhu: i-baud: 115200, Idatha: 8 bit, Ukulingana: akukho, Izingcezu zokumisa: ibhithi elingu-1, Ukulawula Ukugeleza: akukho. Imigqa yedatha ingahlelwa ukuthi isebenze kusetshenziswa noma iyiphi i-GPIO yamahhala etholakala kumojula.
I-Eccel ihlinzeka ngebhodi lesisekelo lemojula ye-C1 yokwenza i-prototyping esheshayo: https://eccel.co.uk/product/pepper-c1-module-baseboard/
Ubukhulu bemishini
Zonke izilinganiso ngama-mil.
Ukunyatheliswa kwezinyawo ngefomethi ye-Altium Designer / Circuit Studio ingalandwa kulesi sixhumanisi: http://eccel.co.uk/wp-content/downloads/Pepper_C1/Pepper_C1_module_Altium_lib.zip
Ukucushwa kanye nencazelo yokusebenza
Nali idokhumenti echaza ukucushwa, umthetho olandelwayo wokuxhumana, imiyalo kanye nayo yonke imisebenzi yemojula yePepper C1: https://eccel.co.uk/wp-content/downloads/Pepper_C1/C1_software_manual.pdf
I-Eccel ihlinzeka ngamathuluzi amahhala ahlukahlukene nemitapo yolwazi elungele ukulandwa kulesi sixhumanisi: https://eccel.co.uk/support-free-libraries/
Umlando wokubuyekeza
| Buyekeza | Usuku | Izinguquko |
| 1.5 | 03-Jul-2024 | Isigaba 1.1 sibuyekeziwe |
| 1.4 | 20-May-2024 | Izinyathelo ezinconyiwe zengeziwe |
| 1.3 | 2-Ephreli-2024 | Ukukhishwa kokuqala ngemva kokuhlukanisa isofthiwe nencazelo yehadiwe |
| 1.2 | 29-Mar-2024 | Isigaba 2.4 sibuyekeziwe, Isigaba 2.5 sengeziwe |
| 1.1 | 9-Mar-2023 | Isigaba 1 sibuyekeziwe |
| 1.0 | 1-Mar-2021 | Ukukhishwa kokuqala |
I-MIFARE, i-MIFARE Ultralight, i-MIFARE Plus, i-MIFARE Classic, ne-MIFARE DESFire izimpawu zokuthengisa ze-NXP BV
Akukho sibopho esithathwayo ngendlela yokuhlanganisa noma ukusetshenziswa kokugcina kwamamojula e-C1
Ulwazi olwengeziwe mayelana nemojula ye-C1 neminye imikhiqizo ingatholakala kusizindalwazi se-inthanethi: http://www.eccel.co.uk noma thintana ne-ECCEL Technology (IB Technology) nge-imeyili kokuthi: sales@eccel.co.uk
Amadokhumenti / Izinsiza
 |
I-Eccel C1 Pepper Module [pdf] Imaniwali yosebenzisayo C1, C1 Pepper Module, Pepper Module, Module |
 |
I-Eccel C1 Pepper Module [pdf] Imaniwali yosebenzisayo C1, C1 Pepper Module, Pepper Module, Module |
