Ikhibhodi ye-DONNER D37 Midi

ISINGENISO

Siyabonga ngokuthenga Ikhibhodi Ye-Donner STARRYKEY 37 Midi!
I-STARRYKEY 37 iyikhibhodi ye-midi ehlangene ngendlela engavamile ongayisebenzisa ukuze udale owakho umculo ngamakhompyutha noma amathebulethi. Ikhibhodi yesitayela sepiyano ezwela kakhulu ezwela isivinini enezici ezihlukahlukene yenza kube lula ukuqamba umculo wakho oyingqayizivele uma ugqozi seluthola.

IZICI

• Ikhibhodi ehlangene enobubanzi obugcwele
• Ihambisana namadivayisi anikwe amandla umthombo womsindo (amakhompyutha, amaphilisi, ama-smartphone, njll.)
• Amaphedi akhanyiselwe emuva anemibala eminingi okudala amabhithi nokushintsha izinhlelo
• 8+8+4 amaknobho, izinkinobho, namafada abelwe wona ukuze kulungiswe inkululeko
• Isondo lokugoba le-pitch kanye nesondo lokuguquguquka
• Kufakwe i-pad bank/izinga eligcwele/i-transpose/octave multifunction
• I-MIDI OUT jack ukuze isetshenziswe nama-synthesizer, ama-sequencers, njll.
• Ijekhi ye-USB ye-MIDI yokushaja nokudluliswa kwedatha
• Isofthiwe ye-STARRYKEY37 EDITOR yokuhlela imilayezo ye-midi usebenzisa ikhompuyutha noma ithebhulethi

IZINYATHELO ZOKUZIVIKELA

Sicela ufunde okulandelayo ngokuningiliziwe kuqala ngaphambi kokusebenza.

• Gcina futhi ulandele le miyalo.
• I-STARRYKEY 37 imane iyikhibhodi edlulisa futhi ithole ulwazi lwe-midi, ayikho imisindo eyakhelwe kusilawuli, ngakho-ke, uzodinga umthombo wangaphandle (amakhompyutha, amaphilisi, i-synthesizer, njll.) yemisindo.
• Ungayigcini ezindaweni ezilandelayo: Ilanga eliqondile, izinga lokushisa eliphezulu, umswakama owedlulele, uthuli oluningi, ukudlidliza okuqinile.
• Ungawuhlakazi noma uguqule lo mkhiqizo ukuze ugweme ingozi yomlilo nokushaqeka kukagesi.
• Ungacwilisi emanzini noma uwise amanzi kuwo noma kuwo.
• Ungabeki lo mkhiqizo endaweni engalingani nanoma iyiphi enye indawo engazinzile.
• Ngaphambi kokuhlanza ithuluzi, susa njalo ikhebula le-USB. Ungawuhlanzi umkhiqizo ngezinto ezincane, utshwala, noma amakhemikhali afanayo ukuze ugweme ukuguga.
• Ungafaki izinto ezincane emkhiqizweni.
• Khipha lo mkhiqizo ngesikhathi seziphepho zombani kanye nokungasebenzi isikhathi eside.
• Umnikezeli akanacala ngomonakalo odalwe ukusetshenziswa okungafanele noma ukuguqulwa kwedivayisi.

IPHAKEJI LIHLANGANISA

Ikhibhodi ye-STARRYKEY 37 Midi	x 1
I-adaptha ye-USB A kuya ku-C	x 1
Ikhebula le-USB elijwayelekile	x 1
Imaniwali yosebenzisayo	x 1

INCONYWA YE-DAW SOFTWARE

Uhlu lwesoftware enconyiwe ye-DAW lumi kanje:

• I-Ableton Live
• I-Cakewalk Sonar
• I-FL Studio
• I-Studio One
• Amathuluzi we-Pro
• Umvuni
• I-GarageBand
• Ukuxhumana
• Isizathu
• I-Waveform
• Ukuhlolwa
• Cubase/Nuendo
• Okunengqondo

UKUSEBENZISA I-STARRYKEY 37 KANYE NESOFTWARE YOMHLELI

UKUSEBENZISA I-STARRYKEY 37

Okokuqala, xhuma Ikhibhodi ye-STARRYKEY 37 Midi kukhompyutha yakho ngekhebula le-USB, bese ulungisa izilungiselelo ze-DAW ngemva kokuxhuma kuphumelele.

STARRYKEY37 UMHLELI SOFTWARE

• Isofthiwe ye-“STARRYKEY37 EDITOR” ikunikeza indlela ebonakalayo nenembile yokuhlela imiyalezo ehlukahlukene ye-MIDI. Sicela uvakashele isikhulu sethu webindawo https://www.donnermusic.com

PHELILEVIEW

Qaphela

• Isilawuli Esiqhubekayo: Lona umlayezo we-MIDI okwazi ukudlulisa uhla lwamanani, ngokuvamile 0-127. (Emuva kwalokho kuthiwa CC)
• Isiteshi: Lokhu kungaqondakala kalula njengendlela, ngokuvamile esetshenziselwa ukuhlukaniswa kwezwi, ngokuvamile 1-16. (Emuva kwalokho kuthiwa yi-CN)

1. I-ASSIGNABLE KNOB (K1-K8)
   • Ukukhanya okubomvu, okuluhlaza okotshani, nokuluhlaza okwesibhakabhaka kumelela ububanzi bokudlulisa imilayezo ye-MIDI.
   • Amafindo abelwe anganikezwa ukuthumela imilayezo ye-CC MIDI.
   • Imisebenzi eyabelwe ehlukahlukene, ehlanganisa imilayezo ethi CC (0-127) kanye ne-CN (1-16), nayo ingasethelwa amafindo angu-8 nge-“STARRYKEY37 editor”.
2. INKINOBHO ENGABEZWA (B1-B8)
   • Izinkinobho ezinikezwayo zingabelwa ukuthumela imilayezo ye-CC MIDI.
   • Imisebenzi eyabelwe ehlukahlukene, ehlanganisa imilayezo ethi CC (0-127) kanye ne-CN (1-16), uhlobo lwemodi, nombala, nayo ingasethelwa inkinobho ngayinye kweziyi-8 ngokusebenzisa okuthi “STARRYKEY37 editor”.
3. I-PAD ELABELWE (PAD1-PAD8)
   • Amaphedi anikezwayo (Inani lenothi elizenzakalelayo lithi C2-G2) linganikezwa ukuthumela inothi le-MIDI.
   • Sebenzisa [I-PAD BANK] ukuze ushintshe i-BANKA/ BANK B/ BANK C/ (Ihambisana nokubomvu, okuluhlaza okotshani, nokuluhlaza okwesibhakabhaka) Imisebenzi eyabelwe ehlukahlukene, okuhlanganisa inothi le-MIDI/umlayezo we-CC/ Umlayezo we-CN/Uhlobo Lwe-After-Touch/Uhlobo lwemodi/Umlayezo ongashintshi, futhi ingasethelwa iphedi ngayinye ku-BANKA/ BANK B/ BANK C ngokusebenzisa “Umhleli we-STARRYKEY37”.
   • I-Pad Curve: I-PAD inezinhlobo ezintathu zamajika (njengoba kukhonjisiwe emfanekisweni).
4. INDAWO YEkhibhodi
   • Isiteshi se-MIDI sinikezwa okhiye abangu-37 bekhibhodi enosayizi ogcwele.
   • Ijika Lekhibhodi: IKHIBHODI inezinhlobo ezintathu zamajika (njengoba kukhonjisiwe emfanekisweni).
5. I-ASSIGNABLE FADER (F1-F4)
   • Amafader abelwe wona angabelwe ukuthumela imilayezo ye-CC.
   • Imisebenzi eyabelwe ehlukahlukene, ehlanganisa imilayezo ethi CC (0-127) kanye ne-CN (1-16), nayo ingasethelwa ifenisha ngayinye kwezi-4 nge-“STARRYKEY37 editor”.
6. INKONZO YEZOKUTHUTHA
   • Umlayezo we-CC ozenzakalelayo uthi Misa Isikhashana/Dlala/Rekhoda kodwa uphawula ukuthi inkinobho yokuthutha yesofthiwe ye-DAW idinga ukuqoshwa mathupha.
   • Imisebenzi eyabelwe ehlukahlukene, ehlanganisa imilayezo ethi CC (0-127) kanye ne-CN ( 1-16), ingasethelwa inkinobho ngayinye yokuthutha ngokuthi “STARRYKEY37 editor”.
7. PITCH Bend
   • Hambisa leli sondo phezulu noma phansi ukuze uthumele imilayezo ye-Pitch Bend. Ukuhambisa isondo phezulu kuzokwandisa i-pitch; ukuyihambisa phansi kuzonciphisa iphimbo.
   • Umlayezo we-CN (1-16) nawo ungasethwa ukuze uzwakale nge-“STARRYKEY37 editor”.
8. MODULATION WELI
   • Hambisa leli sondo ukuze uthumele imilayezo ye-Modulation Wheel engalawula inani le-vibrato noma i-tremolo emsindweni.
   • Izabelo ezihlukahlukene zingasethwa ukuze zishintshwe, okuhlanganisa u-CC (0-127), umlayezo we-CN (1-16), umlayezo we-CC (Min no-Max)- Uhlu lokukhiphayo Lwesondo Lokushintshanisa Nge-“STARRYKEY37 editor” .
9. I-PAD BANK
   • Cindezela ukuze ushintshe I-BANK A/ BANK B/ BANK C/ (Ehambisana nokubomvu, okuluhlaza okotshani, nokuluhlaza okwesibhakabhaka), kunamaphedi angu-24 ongawahlela.
10. IZINGA ELIGCWELE
    • Inani eliphakeme lokukhiphayo kukho kokubili iphedi yokushaywa kanye nekhibhodi kungakhathaliseki ukuthi icindezelwa amandla angakanani.
11. I-OCTAVE - / OCTAVE +
    • I-Octave phezulu ne-Octave phansi, ilungiseka ngama-octave angu-4 (-4 ukuya ku-+4 octaves) ngokulandelanayo.
12. TRANSPOSE – / TRANSPOSE+
    • I-Semitone iphansi ne-Semitone phezulu, ama-semitone angu-12 alungisekayo (-12 ukuya ku-+12 semitones) ngokulandelana.
13. INKULUMO
    • Okokuqala, cindezela futhi ubambe okuthi [TRANSPOSE+] kanye nokuthi [OCTVATE+] ngesikhathi esifanayo ukuze ufake okusethiwe ngaphambili kohlelo, bese ucindezela u-PROG1-PROG4 noma i-PAD5-PAD8 ukuze ukhethe i-PROG kuyilapho ukukhanya kwe-PROG ekhethiwe kukhanya.
    • Uma ucindezela i-PROG ekhethiwe izofaka imodi ye-RAM futhi inani elithi "PROG" lingu-0.
14. I-MIDI OUT
    • Isokhethi ye-midi enamaphini amahlanu ingathumela idatha ye-MIDI kumadivayisi angaphandle ahambisana ne-MIDI (ikhadi lomsindo, i-sequencer, i-synthesizer, njll.) ngentambo ye-MIDI.
15. I-MIDI-USB
    • Sebenzisa ikhebula le-USB ukuxhuma ikhompuyutha yakho noma amanye amadivaysi ukuze unike amandla ikhibhodi noma ukudluliswa kwedatha.
    • Qaphela ukuthi uma isixhumi esibonakalayo sedivayisi exhunyiwe kungesona imbobo ye-USB A evamile, udinga ukusebenzisa ikhebuli ye-adaptha enomsebenzi we-OTG ukuze udlulise.
16. SUSTAIN PEDAL
    • Xhuma i-pedal esekelayo kule jekhi ngekhebula le-pedal. Amanothi azogcinwa ngemuva kokucindezela i-pedal.
    • Imisebenzi eyahlukahlukene ingasethwa ukuze iqhubeke, okuhlanganisa umlayezo we-CC (0-127), CN (1-16) nge-“STARRYKEY37 editor”.

IMICIMBI

JIKELELE
Uhlobo	Ikhibhodi ye-Donner STARRYKEY 37 Midi
Inombolo Yokhiye Bekhibhodi	37 Izihluthulelo
Amaphedi Abelwe	8 amaphedi
AmaKnobho Abelwe	8 Izinduku
Izinkinobho Ezinikezwayo	8 Izinkinobho
AmaFader Abelwe	4 Imibala
Izinkinobho Zokusebenza	6 Izinkinobho
Izinkinobho Zokuhamba	3 Izinkinobho
Ukunikezwa kwamandla kagesi	5V 1A
OKUFAKILE / OKOKUPHUMAYO
I-USB	Uhlobo-B lwe-USB
Midi Out	5-pin DIN x 1
Phakamisa i-Pedal	1/4" i-pedal jack
Ubukhulu	670 x 218 x 60mm
Isisindo	2.04 kg

ISITATIMENDE SE-FCC

Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobelana kungase kuchithe igunya lomsebenzisi lokusebenzisa okokusebenza.

Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana neNgxenye 15 yeMithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lo mshini ukhiqiza ukusetshenziswa futhi ungakhipha amandla efrikhwensi yomsakazo futhi, uma ungafakiwe futhi usetshenziswe ngokuhambisana nemiyalelo, ungabangela ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

Le divayisi ithobela ingxenye 15 yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo

1. lolu cingo kungenzeka lungabangeli ukuphazamiseka okuyingozi
2. lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-FCC ebekwe endaweni engalawuleki. Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20cm phakathi kwerediyetha nomzimba wakho.

Amadokhumenti / Izinsiza

Ikhibhodi ye-DONNER D37 Midi [pdf] Imaniwali yosebenzisayo Ikhibhodi ye-D37 Midi, i-D37, ikhibhodi ye-Midi, ikhibhodi

Izithenjwa

• Imaniwali yosebenzisayo