I-DELL Unity All Flash kanye ne-Unity Hybrid Customer Replacement Procedure

Ulwazi Lomkhiqizo

I-Dell Unity TM Zonke izinhlelo ze-Flash kanye ne-Unity Hybrid ziyizixazululo zokulondoloza ezenzelwe ukuphathwa nokucubungula idatha ngendlela efanele.
Lezi zinhlelo zitholakala ngamamodeli ahlukahlukene, okuhlanganisa i-Unity 300/300F/350F/380/380F, Unity 400/400F/450F, Unity 500/500F/550F, kanye ne-Unity 600/600F/650F.

Lo mbhalo unikeza imiyalelo yokuthi ungafaka kanjani esikhundleni esinephutha
ukuhlanganiswa kokucubungula isitoreji ezinhlelweni ze-Unity. Imihlangano yokucubungula isitoreji itholakala ngemuva kwe-disk processor enclosure (DPE). Inqubo ihilela ukudlulisa izingxenye ezithile zisuka kusiprosesa esinephutha ziyiswe kusilondolozi esishintshayo.

Ingxenye #:302-002-588

Imiyalo yokusetshenziswa komkhiqizo

1. Ngaphambi kokuqala inqubo yokufaka esikhundleni, qiniseka ukuthi uthole umhlangano omusha weprosesa wesitoreji futhi uhlonze kahle indawo ehloselwe kuyo ohlelweni.
2. Bheka esigabeni sakho Sesevisi ye-Unisphere ukuze uthole imiyalelo yokuthi ungakubona kanjani ukwehluleka, uku-oda izingxenye ezintsha, nokuphatha izingxenye zehadiwe.
3. QAPHELA: Le nqubo ibandakanya ukuqalisa kabusha kweprosesa (SP) okudidiyelwe ukuze kuqinisekiswe ukuthi okungenani i-SP eyodwa isebenza ngaso sonke isikhathi.
   Ngesikhathi sokuqalisa kabusha kwe-SP, idatha ngeke itholakale ekuxhumekeni ngaphambili noma ngasemuva okungaphindiwe ku-SP yontanga.
4. Landela lezi zinyathelo ezingezansi ukuze ungene esikhundleni somhlangano weprosesa wesitoreji onephutha:
   • Vala isistimu futhi unqamule wonke amakhebuli kagesi.
   • Susa ikhava ye-disk processor enclosure (DPE).
   • Thola izingxenye ezimbili zeprosesa yesitoreji (SP) ngemuva kwe-DPE.
   • Khipha ukuhlanganiswa kwe-SP okunephutha ngokunqamula ngokucophelela izintambo nezikulufu eziwubambe endaweni yawo.
   • Dlulisa noma yiziphi izingxenye ezidingekayo kusukela ekuhlanganiseni kwe-SP okunephutha ukuya endaweni yomhlangano we-SP.
   • Faka ukuhlanganiswa kwe-SP esikhundleni ngokuxhuma ngokuphephile izintambo nezikulufu.
   • Shintshanisa ikhava ye-DPE.
   • Xhuma kabusha amakhebuli kagesi namandla kusistimu.
5. Uma uhlangabezana nanoma yiziphi izinkinga noma umkhiqizo ungasebenzi kahle ngemva kokushintshwa, xhumana nochwepheshe bakho bosekelo lobuchwepheshe ukuze uthole usizo.

Izinsiza Ezengeziwe:

Ukuze uthole ulwazi lwakamuva mayelana nezici zomkhiqizo,
izibuyekezo zesofthiwe, ukuxazulula izinkinga, nokunikezwa kwelayisensi, ungavakashela izixhumanisi ezilandelayo:

• I-Unity Technical Documentation: https://www.dell.com/unitydocs
• Ukusekela (ukubhaliswa kuyadingeka): https://www.dell.com/support

Ukuphatha Amayunithi Angase Ashintshe:

Lapho usebenzisana namayunithi ashintshwayo ngesikhathi sokushintshwa, kubalulekile ukulandela lezi zinyathelo zokuphepha:

• Gwema ukulimala kwe-electrostatic discharge (ESD) ngokugcina amayunithi ashintshayo noma athuthukise emaphaketheni awo angasebenzi kuze kube yilapho elungele ukufakwa.
• Qoqa zonke izinto ezidingekayo, okuhlanganisa ikhithi ye-ESD, ngaphambi kokuqala insiza.
• Gwema ukusuka endaweni yokusebenza phakathi nesevisi ukuze uvimbele ukwakha inkokhiso ye-electrostatic.
• Sebenzisa amagilavu ​​e-ESD anti-static noma ibhande lesandla le-ESD elinebhande ukuze unciphise ubungozi be-ESD.
• Uma usebenzisa i-Wristband ye-ESD enebhande, namathisela isiqeshana kubakaki ESD noma insimbi engenalutho ekhabetheni/irack noma indawo ebiyelwe.
• Goqa ibhande le-ESD esihlakaleni sakho ngenkinobho yensimbi esikhumbeni sakho.
• Uma itholakala, hlola ibhande lesandla usebenzisa umhloli.
• Esimeni esiphuthumayo ngaphandle kwekhithi ye-ESD, landela izinqubo eziphuthumayo ezishiwo kumanuwali womkhiqizo.

Ukushintsha umhlangano weprosesa wesitoreji onephutha
I-Rev. 02
Okthoba 2022

Lo mbhalo uchaza indlela yokushintshanisa umhlangano wokucubungula isitoreji onephutha ezinhlelweni ze-Unity 300/300F/350F/380/380F, Unity 400/400F/450F, Unity 500/500F/550F, kanye ne-Unity 600/600F/650F.
Imihlangano emibili yokucubungula isitoreji (SP) itholakala futhi isusiwe ngemuva kwe-disk processor enclosure (DPE). Ngalesi nqubo uzodlulisela izingxenye ezithile ku-SP enephutha uziyise endaweni ye-SP eshintshayo.

QAPHELA: Le nqubo ibandakanya ukuqalisa kabusha kweprosesa (SP) okudidiyelwe ukuze kuqinisekiswe ukuthi okungenani i-SP eyodwa isebenza ngaso sonke isikhathi. Ngesikhathi sokuqalisa kabusha kwe-SP, idatha ngeke itholakale ekuxhumekeni ngaphambili noma ngasemuva okungaphindiwe ku-SP yontanga.
ISEXWAYISO: Kusistimu enedatha Ekuphumuleni enikwe amandla, landela inqubo evamile yokushintsha izingxenye ezinephutha. Ukukhipha ihadiwe ngendlela engafanele kungabangela ukuthi idatha ingafinyeleleki.
Ukushintsha i-DPE kanye nama-SP womabili kudinga inqubo ekhethekile njengoba isitolo sokhiye siboshelwe kuhadiwe. Ungazishintshi zonke izingxenye ezintathu ngesikhathi esisodwa, kunalokho gcina i-SP kuze kube yilapho i-DPE isiku-inthanethi ngaphambi kokuyishintsha. Uma zonke izingxenyekazi zekhompuyutha zishintshiwe, buyisela i-keystore kusuka kusipele.

Ngaphambi kokuthi uqale

Ngaphambi kokuthi uqale le nqubo, qinisekisa ukuthi uyitholile ingxenye entsha futhi uhlonze kahle indawo ehloselwe yona ohlelweni. Bheka kusigaba sakho se-Unisphere Service ukuze uthole imiyalelo yokuthi ungakubona kanjani ukwehluleka, uku-oda izingxenye ezintsha nokuphatha izingxenye zehadiwe.

QAPHELA: Le nqubo ibandakanya ukuqalisa kabusha kweprosesa (SP) okudidiyelwe ukuze kuqinisekiswe ukuthi okungenani i-SP eyodwa isebenza ngaso sonke isikhathi. Ngesikhathi sokuqalisa kabusha kwe-SP, idatha ngeke itholakale ekuxhumekeni ngaphambili noma ngasemuva okungaphindiwe ku-SP yontanga.

Izinsiza ezengeziwe
Njengengxenye yomzamo wokuthuthukisa, ukubuyekezwa kwesofthiwe nehadiwe kukhishwa ngezikhathi ezithile. Ngakho-ke, eminye imisebenzi echazwe kulo mbhalo ingase ingasekelwa yizo zonke izinguqulo zesofthiwe noma ihadiwe esetshenziswayo njengamanje. Amanothi okukhishwa komkhiqizo ahlinzeka ngolwazi lwakamuva kakhulu ngezici zomkhiqizo. Thinta uchwepheshe wakho wosekelo lwezobuchwepheshe uma umkhiqizo ungasebenzi kahle noma ungasebenzi njengoba kuchazwe kulo mbhalo.

Ungalutholaphi usizo
Ukwesekwa, umkhiqizo, kanye nolwazi lwamalayisense lungatholakala njengoba kuchazwe ngezansi.

Ulwazi lomkhiqizo
Ukuthola imibhalo yomkhiqizo nesici noma amanothi okukhululwa, vakashela ku-Unity Technical Documentation kokuthi: https://www.dell.com/unitydocs.

Ukuxazulula inkinga
Ukuze uthole ulwazi mayelana nemikhiqizo, ukubuyekezwa kwesofthiwe, ukulayisensa, nesevisi, vakashela kokuthi Ukusekela (ukubhaliswa kuyadingeka) kokuthi: https://www.dell.com/support. Ngemva kokungena ngemvume, thola ikhasi lomkhiqizo elifanele.

Ukuphatha amayunithi ashintshekayo
Lesi sigaba sichaza izinyathelo zokuphepha okufanele uzithathe kanye nezinqubo ezijwayelekile okufanele uzilandele lapho ukhipha, ufaka, futhi ugcina noma iyiphi iyunithi engashintshwa.

Ukugwema ukulimala kwe-electrostatic discharge (ESD).
Lapho ushintsha noma ufaka amayunithi ezingxenyekazi zekhompuyutha, ungalimaza ungahlosile amasekhethi e-elekthronikhi abucayi esisetshenziswa ngokumane uwathinte.
Ishaja ye-electrostatic enqwabelene emzimbeni wakho iphuma ngamasekhethi. Uma umoya endaweni yokusebenzela wome kakhulu, sebenzisa isihwamisa-manzi endaweni yokusebenza ukuze usize ukwehlisa ingcuphe yokulimala kwe-ESD.
Landela lezi zinqubo ukuze uvimbele ukulimala kwemishini:

• Nikeza indawo eyanele yokusebenza kumishini.
• Sula indawo yokusebenza yanoma yiziphi izinto ezingadingekile noma izinto zokwakha ezakha ngokwemvelo ukushaja kwe-electrostatic, okufana nokupakishwa kwegwebu, izinkomishi eziyigwebu, izisonga ze-cellophane, nezinto ezifanayo.
• Ungawasusi amayunithi ashintshayo noma athuthukise emaphaketheni awo angasebenzi kuze kube yilapho usulungele ukuwafaka.
• Ngaphambi kokuthi uqale isevisi, qoqa ndawonye ikhithi ye-ESD nazo zonke ezinye izinto ozidingayo.
• Uma ukusevisa sekuqalile, gwema ukusuka endaweni yokusebenza; kungenjalo, ungase wakhe i-electrostatic charge.
• Sebenzisa amagilavu ​​e-anti-static e-ESD noma i-Wristband ye-ESD (enebhande).
  Uma usebenzisa i-Wristband ye-ESD enebhande:
  • Namathisela isiqeshana se-Wristband ye-ESD kubakaki be-ESD noma insimbi engenalutho kukhabhinethi/irack noma indawo ebiyelwe.
  • Goqa ibhande le-ESD esihlakaleni sakho ngenkinobho yensimbi esikhumbeni sakho.
  • Uma umhloli etholakala, hlola ibhande esihlakaleni.
• Uma kuvela isimo esiphuthumayo futhi ikhithi ye-ESD ingatholakali, landela izinqubo Zezinqubo Eziphuthumayo (ngaphandle kwekhithi ye-ESD).

Izinqubo eziphuthumayo (ngaphandle kwekhithi yokukhipha i-electrostatic)
Esimeni esiphuthumayo lapho ikhithi yokukhipha i-electrostatic discharge (ESD) ingatholakali, sebenzisa izinyathelo zokuphepha ezilandelayo ukuze unciphise amathuba okukhishwa kwe-electrostatic ngokuqinisekisa ukuthi umzimba wakho kanye ne-subassembly kunamandla afanayo e-electrostatic.
QAPHELA: Lezi zinyathelo zokuphepha azithatheli indawo ukusetshenziswa kwekhithi ye-ESD. Balandele kuphela uma kunesimo esiphuthumayo.

• Ngaphambi kokuthi uthinte noma iyiphi iyunithi, thinta indawo yensimbi engenalutho (engapendiwe) yekhabhinethi/irack noma indawo ebiyelwe.
• Ngaphambi kokukhipha noma iyiphi iyunithi esikhwameni sayo se-antistatic, beka isandla esisodwa ngokuqinile endaweni yensimbi engenalutho yekhabhinethi/irack noma indawo ebiyelwe, futhi ngesikhathi esifanayo, thatha iyunithi ngenkathi lisavaliwe esikhwameni se-antistatic. Ngesikhathi esifanayo, unganyakazi ekamelweni noma uthinte enye impahla, izisebenzi, noma izindawo ezingaphezulu uze ufake iyunithi.
• Uma ukhipha iyunithi esikhwameni se-antistatic, gwema ukuthinta noma yiziphi izingxenye ze-elekthronikhi namasekhethi kuso.
• Uma kufanele ujikeleze igumbi noma uthinte ezinye izindawo ngaphambi kokufaka iyunithi, qala ngokubuyisela iyunithi esikhwameni se-antistatic. Uma usulungele futhi ukufaka iyunithi, phinda lezi zinqubo.

Izikhathi ze-Hardware acclimation

Amayunithi kufanele ajwayelane nendawo yokusebenza ngaphambi kokufaka amandla. Lokhu kudinga isistimu engapakishiwe noma ingxenye ukuthi ihlale endaweni yokusebenza amahora angafinyelela kwangu-16 ukuze kuzinze ngokushisa futhi kuvinjwe ukufiphala.

Indawo yezokuthutha/yesitoreji		Izinga lokushisa lendawo yokusebenza	Isikhathi se-Acclimation
Izinga lokushisa	Umswakama
Ngokuzisholo 68-72°F (20-22°C)	Ngokuzisholo 40-55% RH	Okungu-68-72°F (20-22°C) 40-55% RH	0-1 amahora
Kuyabanda <68°F (20°C)	Yomile <30% RH	<86°F (30°C)	4 amahora
Kuyabanda <68°F (20°C)	Damp ≥30% RH	<86°F (30°C)	4 amahora
Kuyashisa >72°F (22°C)	Yomile <30% RH	<86°F (30°C)	4 amahora
Kuyashisa >72°F (22°C)	Okuswakeme okungu-30-45% RH	<86°F (30°C)	4 amahora
	Okuswakeme okungu-45-60% RH	<86°F (30°C)	8 amahora
	Okuswakeme ≥60% RH	<86°F (30°C)	16 amahora
Akwaziwa		<86°F (30°C)	16 amahora

• Uma kunezimpawu zokufingqa ngemva kokudlula isikhathi esinconyiwe sokulinganisa, vumela amahora angu-8 engeziwe ukuze uzinze.
• Amasistimu nezingxenye akumele zibe nezinguquko kumazinga okushisa nokuswakama okungase kubangele ukujiya ukuthi kwakheke kuleyo sistimu noma ingxenye. Ungeqi izinga lokushisa lokuthumela nesitoreji elingu-45°F/hr
  (25°C/ihora).

Ukususa, ukufaka, noma ukugcina amayunithi ashintshekayo
Sebenzisa izinyathelo zokuphepha ezilandelayo lapho ususa, uphatha, noma ugcina amayunithi angashintshwa:

ISEXWAYISO: Amanye amayunithi ashintshekayo aneningi lesisindo sawo ngemuva kwengxenye. Qinisekisa ukuthi ingxenye engemuva yeyunithi eshintshwayo iyasekelwa ngenkathi uyifaka noma uyikhipha. Ukwehlisa iyunithi engase ithathelwe indawo kungase kubangele ukulimala komuntu siqu noma ukulimala kwezinto zokusebenza.
QAPHELA: Ukuze uthole imojuli okufanele ifakwe endaweni ebiyelwe, hlola izixhumi ezingemuva kumojuli ukuze uthole noma yimuphi umonakalo ngaphambi kokuzama ukuyifaka.
ISEXWAYISO: Imbiza engazelelwe, ukwehla, noma ukudlidliza okumaphakathi kungalimaza unomphela amanye amayunithi azwelayo ashintshekayo.

• Ungayisusi iyunithi engase ishintshe enephutha kuze kube yilapho usuthole ukumiselela okutholakalayo.
• Lapho uphatha amayunithi angashintshwa, gwema ukukhishwa kwe-electrostatic (ESD) ngokugqoka amagilavu ​​e-ESD anti-static noma i-Wristband ye-ESD enebhande. Ukuze uthole ulwazi olwengeziwe, bheka Ukugwema umonakalo we-electrostatic discharge (ESD) .
• Gwema ukuthinta noma yiziphi izingxenye ze-elekthronikhi eziveziwe namasekhethi eyunithi eshintshwayo.
• Ungalokothi usebenzise amandla amaningi ukuze ususe noma ufake iyunithi engashintshwa. Zinike isikhathi sokufunda imiyalelo ngokucophelela.
• Gcina iyunithi eshintshwayo esikhwameni se-antistatic kanye nesiqukathi sokuthumela esiklanywe ngokukhethekile osithole kuso. Sebenzisa isikhwama se-antistatic kanye nesitsha sokuthumela esikhethekile uma udinga ukubuyisela iyunithi eshintshwayo.
• Amayunithi ashintshekayo kufanele ajwayelane nendawo yokusebenza ngaphambi kokufaka amandla. Lokhu kudinga ingxenye engapakishiwe ukuthi ihlale endaweni yokusebenza kuze kufike emahoreni ayi-16 ukuze izinze ngokushisa futhi ivimbele ukufiphala. Bheka izikhathi zokufinyeleleka kwezingxenyekazi zekhompuyutha ukuze uqinisekise ukuthi iyunithi eshintshwayo izinzile ngokwezinga lokushisa endaweni yokusebenza.
  QAPHELA: Isistimu yakho yesitoreji yakhelwe ukuthi ivulwe ngokuqhubekayo. Izingxenye eziningi ziyashintshashintsha; okungukuthi, ungakwazi ukufaka esikhundleni noma ukufaka lezi zingxenye ngenkathi isistimu yokugcina isebenza. Kodwa-ke, isistimu idinga ukuthi ama-bezel angaphambili kufanele ahlale enamathiselwe ukuze kuqinisekiswe ukuthobela kwe-EMI. Qiniseka ukuthi unamathisela kabusha i-bezel ngemva kokushintsha ingxenye. Futhi, indawo ngayinye kufanele ibe nengxenye noma iphaneli yokugcwalisa ukuze kuqinisekiswe ukugeleza komoya okufanele kulo lonke uhlelo.

Ukuqaqa ingxenye
Sebenzisa lezi zinqubo ezihamba phambili ukuze uvule ingxenye.

Izinyathelo

1. Gqoka amagilavu ​​e-ESD noma unamathisele ibhande lesandla le-ESD engalweni yakho nendawo ebiyelwe ofaka kuyo ingxenye.
2. Khipha ingxenye bese uyibeka endaweni engena-static.
3. Uma ingxenye ithatha indawo yengxenye enephutha, gcina impahla yokupakisha ukuze ubuyisele ingxenye enephutha.

Ukuphatha amadiski
Amadiski ayizingxenye ze-elekthronikhi ezibucayi kakhulu. Ngaso sonke isikhathi phatha idiski ngobumnene, futhi ugcine imihlahlandlela elandelayo:

• Landela imiyalelo echazwe kokuthi Ukukhipha, ukufaka, noma ukugcina amayunithi ashintshekayo.
• Ungawapakishi amadiski phezu kwamanye, noma uwabeke ezindaweni eziqinile.
• Qiniseka ukuthi idiski yokufaka esikhundleni inenombolo efanayo yengxenye noma inombolo yengxenye yokushintshwa okugunyaziwe kwediski enephutha. Inombolo yengxenye (PN005xxxxxx) ivela kudiski. Idiski eshintshwayo kufanele ibe uhlobo olufanayo (isibample: SAS, FLASH) futhi ibe nomthamo ofanayo (usayizi nesivinini) njengediski eshintshayo.
• Lapho ukhipha idiski elijikelezayo, khipha idiski ingxenye yesikhala, bese ulinda imizuzwana engu-30 ukuze idrayivu ijikele phansi ngaphambi kokuyikhipha.
• Uma ufaka amadiski amaningi kusistimu enikwe amandla, linda okungenani imizuzwana eyi-10 ngaphambi kokuslayida idiski elandelayo endaweni.
• Beka amadiski endaweni ethambile, engasamileki, njengephedi legwebu le-antistatic elisezingeni lomkhakha noma isiqukathi esisetshenziselwa ukuthumela idiski.

Imibala yephoyinti lokuthinta elijwayelekile
Amaphoyinti wokuthinta ayizindawo lapho unga:

• Bamba ihadiwe ukuze ususe noma ufake ingxenye.
• Vula noma vala i-latch.
• Vula ifindo ukuze uvule, uvale, noma ulungise ingxenye.

Imibala yephoyinti yokuthinta evamile i-terra-cotta (owolintshi) noma eluhlaza okwesibhakabhaka.
QAPHELA: Ngaphakathi kwale mibhalo, kusetshenziswa umbala owolintshi esikhundleni se-terra-cotta ukuze kube lula.

Ithebula 1. Imibala yendawo yokuthinta evamile

Umbala wephoyinti lokuthinta	Incazelo
I-Terra-cotta (iwolintshi)	Lo mbala ukhombisa ukuthi ungakwazi ukwenza umsebenzi, njengokususa ingxenye nge-lever ye-terracotta (iwolintshi), kuyilapho uhlelo luhlala lusebenza (phezulu/luvuliwe). QAPHELA: Eminye imisebenzi ingase idinge izinyathelo ezengeziwe.
Okuluhlaza okwesibhakabhaka	Lo mbala ubonisa ukuthi ukuvala shaqa kwesistimu noma ingxenye kuyadingeka ngaphambi kokuba wenze umsebenzi, njengokukhipha ingxenye nge-lever eluhlaza okwesibhakabhaka.

Ukuhlonza nokuthola umhlangano weprosesa wesitoreji onephutha

Ngaphambi kokuthi umiselele umhlangano weprosesa wesitoreji onephutha, kufanele uthole ukubekwa kwawo ngaphakathi kwesistimu yokugcina ngokusebenzisa i-Unisphere.

Mayelana nalo msebenzi
Usebenzisa i-Unisphere, thola umhlangano weprosesa wesitoreji onephutha endaweni ebiyelwe.

Izinyathelo

1. Ku-Unisphere, khetha Isistimu View.
2. Khetha ikhasi le-Enclosures.
3. Khetha i-DPE kumenyu eyehlayo ye-Enclosure, bese ukhetha Okungemuva view kwendawo ebiyelwe. Khetha iphrosesa entsha yesitoreji eboniswe kule ndawo ebiyelwe view.
4. Thola umhlangano weprosesa wesitoreji onephutha omakwe ngokusawolintshi futhi uboniswe Ku-Enclosure view kubonisiwe.

Umfanekiso 1. Iprosesa yesitoreji enephutha A – exampindawo le

QAPHELA: Amasistimu we-Unity XT 380/380F akhiqizwa engxenyeni yesibili ka-2022 futhi kamuva ngeke afake amachweba amabili we-10 GbE. Ukuze uthole ulwazi olwengeziwe, bheka i-Dell Unity XT: Isingeniso SePlatform – A Detailed Review iphepha elimhlophe ku-Online Support.

Ilungiselela iprosesa yokugcina (SP) yesevisi

Mayelana nalo msebenzi
Ukuze uvikele isistimu yakho ekulahlekeni kwedatha ngephutha phakathi nalo msebenzi wokulungisa, kufanele ulungiselele i-SP yesevisi. Ulungiselela i-SP yesevisi ngokuyibeka Kumodi Yesevisi.
Ukufaka Imodi Yesevisi kumisa i-I/O ku-SP ukuze imisebenzi yesevisi yenziwe ngokuphepha.

QAPHELA: Womabili ama-SP AKUMELE abe kumodi yesevisi ngesikhathi esisodwa.

Izinyathelo

1. Vula i-Unisphere bese ukhetha Isevisi, bese ukhetha Imisebenzi Yesevisi.
2. Ngaphansi kwegama lephrosesa yesitoreji lapho uzofaka khona umhlangano omusha wephrosesa wesitoreji, khetha okuthi Faka Imodi Yesevisi bese uchofoza okuthi Sebenzisa.
3. Uma utshelwa, faka Iphasiwedi Yesevisi ukuze ufake i-SP Kumodi Yesevisi.
4. Ongakukhetha: Qala kabusha isiphequluli sakho noma ulandele imiyalelo esesikrinini ukuze ubuyisele ukusebenza okugcwele ku-Unisphere.
   Lapho ubeka iphrosesa eyinhloko yesitoreji ku-Service Mode, i-Unisphere izoba ingasabeli okwesikhashana (cishe umzuzu owodwa) njengoba izinsizakalo zokuphatha zidlulisela kwenye i-SP.
5. Buyela kukhabhinethi nesistimu bese uthola i-SP ku-DPE ngemuva kwekhabhinethi.
6. Linda kuze kube yilapho i-SP fault LED icwayiza i-amber eshintshanayo nokuluhlaza okwesibhakabhaka ngaphambi kokuqhubeka nomsebenzi olandelayo.
   I-SP fault LED ibaneka i-amber eshintshanayo noluhlaza okwesibhakabhaka kuyilapho i-SP ihlala kumodi Yesevisi futhi ithola amandla asebenzayo.

Umfanekiso 2. Iphutha le-SP ye-LED

QAPHELA: Amasistimu we-Unity XT 380/380F akhiqizwa engxenyeni yesibili ka-2022 futhi kamuva ngeke afake amachweba amabili we-10 GbE. Ukuze uthole ulwazi olwengeziwe, bheka i-Dell Unity XT: Isingeniso SePlatform – A Detailed Review iphepha elimhlophe ku-Online Support.

Ukushintsha umhlangano weprosesa wesitoreji onephutha

Thatha lezi zenzo ezilandelayo ukuze ususe umhlangano weprosesa wesitoreji onephutha bese ufaka umhlangano wokufaka esikhundleni sokucubungula kusistimu.

Ukukhipha umhlangano we-SP
Le nqubo ichaza indlela yokukhipha umhlangano we-SP endaweni ebiyelwe. Kunemihlangano emibili ye-SP. Umhlangano we-SP ophezulu uthathwa ngokuthi "ubheke phansi" futhi uzofana ne-SP engezansi. Umfanekiso ubonisa ukususwa komhlangano we-SP ophezulu. Inqubo yokukhipha umhlangano ongezansi we-SP iyafana.

Okudingekayo
Thola umhlangano we-SP onephutha nge-amber Fault LED.

Mayelana nalo msebenzi

QAPHELA: UNGAKUSUKU ukuhlanganiswa kwe-SP kuyilapho i-LED ethi “Akuphephile ukukhipha i-SP” eboniswe ngezansi ikhanyisiwe.

Izinyathelo

1. Zungezisa ibheyili yentambo yamandla kwesokudla (kwesokunxele ukuze uthole amandla angaphansi). Nqamula intambo yamandla e-AC esiphakelini samandla.
   QAPHELA: Uma imojuli ye-I/O nezintambo zenethiwekhi zingakafakwa ilebula kakade, zilebule ngokucacile ukuze ziphinde zixhunywe kamuva.
2. Nqamula inethiwekhi kanye nazo zonke ezinye izintambo kusukela ngemuva kwamamojula e-I/O nezimbobo zenethiwekhi ekuhlanganiseni kwe-SP.
   QAPHELA: Ungasusi noma yiziphi izintambo komunye umhlangano we-SP.
3. Donsa isibambo sesikulufu somkhawulo wetorque ekuhlanganiseni kwe-SP (1).
4. Phendula isibambo ngokuphambene newashi ukuze ukhulule ukuhlanganiswa kwe-SP endaweni ebiyelwe (1).
   Njengoba isibambo siphendulwa, umhlangano we-SP ukhipha endaweni ebiyelwe. Uma ukunyakaza kwangaphandle kuma, umhlangano we-SP usulungele ukususwa.
   ISEXWAYISO: Umhlangano we-SP uphuma ngokuphelele endaweni ebiyelwe. Zilungiselele ukusekela inhlangano ye-SP ukuze ugweme ukuyiyeka.Umfanekiso 3. Susa umhlangano we-SP
5. Sebenzisa isibambo ukudonsa ukuhlangana kwe-SP ngaphandle ngokwanele ukubamba izinhlangothi ngazo zombili izandla (2). Khona-ke ngazo zombili izandla ezisekela umhlangano we-SP, donsa umhlangano we-SP ngokugcwele uphume endaweni ebiyelwe.
6. Beka i-SP, enendawo engaphezulu phezulu, endaweni yokusebenza ehlanzekile, eyisicaba engena-static.
7. Qinisekisa ukuthi wonke ama-LED e-SP assembly avaliwe ukuze uqinisekise ukuthi i-SP iqedile ukucisha kwayo ngemva kokukhishwa ku-DPE. Kuthatha cishe imizuzu emithathu ukuthi i-SP ihlanganise amandla angaphakathi uma isikhishiwe emthonjeni wamandla.
   ISEXWAYISO: Ungayisusi ikhava yangaphezulu ye-SP kuze kube yilapho inqubo yokufaka i-vaulting ezenzakalelayo isiphelile futhi wonke ama-SP LED ecishiwe. Uma ikhava engaphezulu ivuliwe ngenkathi inqubo yokufaka i-vaulting yenzeka, icupha ukwehla kwamandla e-SP nezingxenye zayo, kuphazamise inqubo yokufaka i-vaulting.

Idlulisela izingxenye ze-SP ezisebenziseka kabusha

Kumelwe wenze le misebenzi elandelayo ukuze udlulisele izingxenye ezisebenziseka kabusha zisuka emshinini we-SP onephutha ziyise emshinini we-SP oshintshwayo:

1. Ngasikhathi sinye, dlulisa izingxenye ezingemuva kumhlangano we-SP onephutha bese uwufaka endaweni ehambisanayo ekuhlanganiseni kwe-SP esikhundleni.
   • a. Dlulisela imojula yokuphakela amandla kumhlangano we-SP oshintshwayo.
   • b. Dlulisela imojuli ye-I/O ngayinye efakiwe endaweni efanayo ncamashi ekuhlanganiseni kwe-SP esikhundleni.
2. Okulandelayo, dlulisa izingxenye zangaphakathi kusuka kumhlangano we-SP onephutha bese uyifaka kumhlangano we-SP oshintshwayo.
   • a. Dlulisela imojuli yememori ngayinye endaweni efanayo ekuhlanganiseni kwe-SP esikhundleni.
   • b. Dlulisela i-BBU kumhlangano we-SP esikhundleni.
   • c. Dlulisela idiski yangaphakathi ye-m.2 SSD ekuhlanganiseni kwe-SP esikhundleni.
   • d. Dlulisela imojula ngayinye yabalandeli bokupholisa endaweni efanayo ncamashi ekuhlanganiseni kwe-SP esikhundleni.

Lesi sigaba sichaza ukuthi kwenziwa kanjani ngamunye wale misebenzi.
Ukudlulisa ukunikezwa kwamandla
Le nqubo ichaza indlela yokudlulisa ugesi usuka emshinini we-SP onephutha uyiswe endaweni ye-SP.

Izinyathelo

1. Phusha futhi ubambe ithebhu yokukhipha okuwolintshi (1) kwesokunxele (ngakwesokudla ukuze uthole amandla aphezulu) bese ubamba ukunikezwa kwamandla ngesibambo sawo. Khipha ukunikezwa kwamandla ngokuwudonsa kumhlangano we-SP onephutha (2).Umfanekiso 4. Ukukhipha ugesi
2. Qondanisa indawo kagesi nendawo yokuhlanganisa ye-SP esikhundleni.
3. Phusha ugesi kumhlangano we-SP (1) uze uchofoze endaweni (2).Umfanekiso 5. Ifaka ugesi

Kudluliswa imojuli ye-I/O noma imojuli yokugcwalisa

Mayelana nalo msebenzi
Le nqubo ichaza indlela yokudlulisa imojula ye-I/O noma imojula yokugcwalisa isuka kumhlangano we-SP onephutha iye endaweni ye-SP. Kunezinhlobo ezahlukene zamamojula we-I/O okungenzeka abe khona. Inqubo yokudlulisa ngayinye iyafana. Le nqubo ichaza inqubo emele futhi esebenza kuhlobo ngalunye lwemojuli ye-I/O.

Izinyathelo

1. Donsa indlela yokucupha kusibambo semojuli ye-I/O ukuze uyikhulule.
2. Donsa kancane imojuli kusuka ku-slot.Umfanekiso 6. Isusa imojuli ye-I/O
3. Ekuhlanganiseni kwe-SP esikhundleni, qondanisa imojuli nembobo engenalutho bese uphushela ngokucophelela imojula endaweni .
4. Uma imojuli ibonakala ihlezi, cindezela futhi ukhulule inkinobho encane esibambeni.
   • Uma inkinobho ihlala ingaphakathi, imojuli ihlezi ngokugcwele.
   • Uma inkinobho ibuyela emuva, phushela kancane imojula ku-chassis, bese uyiphusha futhi.
   • Uma inkinobho namanje ingaphumuli isibambo sayo, susa imojuli bese uphinda izinyathelo 1 no-2.Umfanekiso 7. Ifaka imojuli ye-I/O

Ukukhipha ikhava ephezulu ekuhlanganiseni kwe-SP

Izinyathelo

1. Ngenkathi ucindezela phansi inkinobho yokukhipha eluhlaza okwesibhakabhaka (1), slayida ikhava engaphezulu uye ngemuva cishe iyintshi engu-½ ize ime (2).
2. Phakamisa ikhava engaphezulu phezulu bese uyikhipha ekuhlanganiseni kwe-SP (3).Umfanekiso 8. Ikhipha ikhava yangaphezulu ekuhlanganiseni kwe-SP

Ukususa isiphithiphithi sokugeleza komoya

Okudingekayo
Qinisekisa ukuthi ukuhlanganiswa kwe-SP kuqede wonke amandla angaphakathi ngaphambi kokususa ukushayisana komoya okuphezulu.

Izinyathelo

1. Cindezela kumathebhu ezinhlangothini zombili ze-baffle yokugeleza komoya (1).
2. Phakamisa ukugeleza komoya phezulu futhi ukususe ekuhlanganiseni kwe-SP (2).Umfanekiso 9. Ukususa isiphithiphithi somoya

Ukukhipha i-DIMM (Imojula Yenkumbulo)
Kunezikhala ezine zamamojula e-DIMM. Inqubo yokukhipha noma yimaphi ama-DIMM iyafana.

Izinyathelo

1. Namathisela i-Wristband ye-ESD engalweni yakho nasendaweni ebiyelwe.
2. Cindezela amathebhu amabili okugcina aye phansi ukuze ukhulule imojuli ye-DIMM esikhaleni sayo.
3. Khipha imojula ye-DIMM esikhaleni. Phinda noma imaphi amanye amamojula e-DIMM njengoba kudingeka.Umfanekiso 10. Isusa i-DIMM

Ukufaka i-DIMM (Imojuli Yenkumbulo)

Izinyathelo

1. Namathisela i-Wristband ye-ESD engalweni yakho nasendaweni ebiyelwe.
2. Ngokuthinta kuphela imiphetho engaphandle ye-DIMM, qondanisa imojuli nesixhumi.
3. Cindezela i-DIMM ngokuqinile uye phansi kusixhumi. Uma i-DIMM isihlezi ngokugcwele uzozwa isifinyezo futhi uzwe izixhumi zokuxhuma zichofoza endaweni.Umfanekiso 11. Ifaka i-DIMM
4. Phinda le nqubo kwamanye ama-DIMM njengoba kudingeka.

Ukukhipha ibhethri kumojuli yebhasi
Le nqubo ichaza indlela yokukhipha ibhethri kumojuli yebhasi.

Izinyathelo

1. Thola ikhebuli exhuma ibhethri kumojuli yebhasi kubhodi lomama.
   QAPHELA: Esinyathelweni esilandelayo, ungase ukuthole kulula ukunqamula ikhebula ebhodini lomama. Bese, ngemva kokwenza isinyathelo esilandelayo, dlulisela ikhebula ebhethrini elingena esikhundleni semojuli yebhasi.
2. Ebhethri kumojuli yebhasi, cindezela ithebhu yokukhulula kusixhumi sekhebula bese usinqamula ebhethrini kumojuli yebhasi.
3. Usebenzisa isandla esisodwa, cindezela kumathebhu amabili abambayo phansi kwebhethri kumojuli yebhasi (1).
4. Ngesikhathi esifanayo, sebenzisa esinye isandla ukuze uphakamise ingaphambili lebhethri kumojuli yebhasi uye phezulu nge-engeli futhi uyisuse ebhodini lomama (2).Umfanekiso 12. Ukukhipha ibhethri kumojuli yebhasi

Ifaka ibhethri kumojuli yebhasi
Le nqubo ichaza indlela yokufaka Imojula Yebhethri.

Izinyathelo

1. Faka i-engeli ekugcineni kwebhethri kumojula yebhasi endaweni ye-motherboard (1).
2. Qondanisa ibhethri kumojula yebhasi namaphinikhodi amabili angaphambili, bese ucindezela phansi ekugcineni kwebhethri kumojuli yebhasi (1) ukuze ulivikele ngamathebhu amabili abambayo phansi kwemojuli (2).Umfanekiso 13. Ifaka ibhethri kumojuli yebhasi
3. Xhuma ikhebula yebhethri ye-motherboard kusixhumi sebhethri kumojuli yebhasi.

Ukukhipha ibhodi le-SATA elingu-m.2

Izinyathelo

1. Xhuma ibhande le-ESD engalweni yakho nasendaweni ebiyelwe.
2. Ebhodini le-SATA elingu-m.2, zungezisa ifindo elibambayo ngokuphambene newashi ize ikhululeke ku-stud yokukhwezwa (1).
3. Phakamisa isiphetho sebhodi le-SATA elingu-m.2 nge-engeli encane (2), bese uyikhipha ngokuphelele esikhaleni (3)Umfanekiso 14. Ukukhipha ibhodi le-SATA le-m.2
4. Beka ibhodi le-SATA le-m.2 endaweni enganyakazi.

Ukufaka ibhodi le-SATA elingu-m.2

Izinyathelo

1. Xhuma ibhande le-ESD engalweni yakho nasendaweni ebiyelwe.
2. Faka isiphetho setheminali sebhodi le-SATA elingu-m.2 endaweni esikhaleni kubhodi lomama (1).
3. Beka isikulufu esibamba i-latch embotsheni yokukhweza (2) bese uvikela ibhodi le-m.2 Sata ebhodini lomama ngokuphendula isikulufu siye njengewashi.Umfanekiso 15. Ukufaka ibhodi le-SATA le-m.2

Ukukhipha ifeni epholile
Le nqubo ichaza indlela yokukhipha ifeni kumhlangano we-SP. Kunabalandeli abahlanu emhlanganweni we-SP futhi le nqubo ingasetshenziswa ukususa noma yibaphi abalandeli.

Izinyathelo

1. Nqamula ikhebula lamandla efeni elipholisayo ebhodini lomama.
2. Cindezela inkinobho yokukhipha eluhlaza okwesibhakabhaka ngaphambili kwemojuli (1).
3. Phakamisa ifeni epholisa phezulu usuka ebhodini lomama (2).Umfanekiso 16. Ukukhipha ifeni epholile ekuhlanganiseni kwe-SP
4. Phinda wenzela noma yibaphi abanye abalandeli bokupholisa njengoba kudingeka.

Ifaka ifeni yokupholisa
Le nqubo ichaza indlela yokufaka ifeni kumhlangano we-SP. Kunabalandeli abahlanu emhlanganweni we-SP futhi le nqubo ingasetshenziswa ukufaka noma yiziphi izifeni.

Izinyathelo

1. Misa ifeni epholileyo ukuze ingemuva lenziwe i-engeli phansi endaweni yokukhweza ifeni ekuhlanganiseni kwe-SP (1).
2. Cindezela phansi kufeni yokupholisa ukuze uyikhiye endaweni (2).
3. Xhuma ikhebula lamandla efeni elipholisayo kusixhumi esikubhodi lomama.Umfanekiso 17. Ifaka isiphephetha-moya sokupholisa kumhlangano we-SP
4. Phinda ukuze ufake noma yiziphi ezinye izifeni zokupholisa njengoba kudingeka.

Ukufaka i-air baffle

Mayelana nalo msebenzi
QAPHELA: Uhlangothi lwesobunxele lwe-air baffle lukhuphuka phezu kwebhethri yeseli yemali.

Izinyathelo

1. Qondanisa iziqeshana ezimbili ezibambayo ku-baffle yokugeleza komoya nezikhala ezisezinhlangothini zokuhlanganiswa kwe-SP (1).
2. Phushela phansi kwi-baffle yokugeleza komoya ukuze uyivikele ekuhlanganiseni kwe-SP (2).Umfanekiso 18. Ukufaka i-air baffle

Ukufaka ikhava ephezulu kumhlangano we-SP

Izinyathelo

1. Beka ikhava engaphezulu phezu komhlangano we-SP futhi uyiqondanise nezikhala ezisezinhlangothini ezingemuva komhlangano (1).
2. Donsela ikhava engaphezulu phambili cishe iyintshi engu-½ ukuze uyivikele endaweni (2).Umfanekiso 19. Ifaka ikhava ephezulu

Ukufaka umhlangano we-SP
Le nqubo ichaza indlela yokufaka umhlangano we-SP endaweni ebiyelwe.

Izinyathelo

1. Qondanisa ukuhlanganisa kwe-SP nendawo evalekile bese uslayida endaweni kuze kube ima (1).
2. Guqula isibambo sesikulufu esiwolintshi somkhawulo we-torque ngokwewashi kuze kube yilapho uzwa umsindo wokuchofoza kusibambo (1). Umsindo wokuchofoza ubonisa ukuthi umkhawulo we-torque ufinyelelwe futhi umhlangano we-SP uhlezi endaweni ebiyelwe.
3. Phusha isibambo sesikulufu somkhawulo we-torque esolintshi ekuhlanganiseni kwe-SP uze uzwe umsindo wokuchofoza kusibambo (2). Umsindo wokuchofoza ubonisa ukuthi isibambo sesikulufa sivikelekile ekuhlanganiseni.Umfanekiso 20. Ukufaka umhlangano we-SP
4. Xhuma ikhebuli yemojuli ye-I/O ngayinye kanye nekhebuli yenethiwekhi endaweni efanayo lapho isuswe khona.
5. Xhuma intambo yamandla e-AC kugesi futhi uvikele intambo ngebheyili yokugcinwa kusixhumi. I-LED enephutha lokuphakelwa kwamandla iyacima ngemva kwemizuzwana emi-2.

Iqalisa kabusha i-SP ibe Imodi Ejwayelekile

Okudingekayo
Linda cishe imizuzu eyi-10-15 ngemva kokufaka kabusha i-SP kusistimu ukuze uvumele ukuqalisa kabusha ngokugcwele kuNdlela Yesevisi futhi i-SP fault LED ibaneka ishintshashintshanisa inhlaka nokuluhlaza okwesibhakabhaka (1 hz) ngaphambi kokuqhubeka.

QAPHELA: Uma uzama lo msebenzi ngaphambi kokuba i-SP iqedele ukuqalisa kabusha okuzenzakalelayo ku-Service Mode umzamo wokuqalisa kabusha ungene ku-Normal mode uzohluleka.

Mayelana nalo msebenzi
Qalisa kabusha i-SP esanda kunikezwa isevisi uye kuModi Ejwayelekile usebenzisa inqubo elandelayo:

Izinyathelo

1. Vula i-Unisphere bese ukhetha Isevisi, bese ukhetha Imisebenzi Yesevisi.
2. Ngaphansi kwegama lephrosesa yesitoreji lapho ofake khona umhlangano omusha wokucubungula isitoreji, khetha Qalisa kabusha bese uchofoza okuthi Sebenzisa.
3. Uma utshelwa, faka Iphasiwedi Yesevisi ukuze ufake i-SP Kumodi Ejwayelekile.
   Kungase kuthathe amaminithi angu-15 ukuze isistimu iqedele ukuqalisa kabusha ukuze ibuyele kumodi evamile.

Iqinisekisa umhlangano omusha wokucubungula isitoreji

Mayelana nalo msebenzi
Qinisekisa ukuthi inhlanganisela entsha yephrosesa yesitoreji ibonwa isistimu yakho, futhi isebenza kahle usebenzisa inqubo elandelayo.

Izinyathelo

1. Ku-Unisphere, khetha Isistimu View.
2. Ekhasini lokufingqa, qinisekisa ukuthi isimo sesistimu SILUNGILE.
3. Khetha ikhasi le-Enclosures.
4. Qinisekisa ukuthi inhlanganisela yephrosesa yesitoreji ibonakala inesimo esithi KULUNGILE endaweni ebiyelwe view.
   Ungase udinge ukuvuselela i-Unisphere ngokuchofoza isithonjana sokuvuselela eduze kwe-Enclosures view.
5. Khetha i-DPE kumenyu eyehlayo ye-Enclosure bese ukhetha Okungemuva view kwendawo ebiyelwe. Khetha iphrosesa entsha yesitoreji eboniswe kule ndawo ebiyelwe view.Umfanekiso 21. Iprosesa yesitoreji esinempilo A – exampindawo le

QAPHELA: Amasistimu e-Unity XT 380/380F akhiqizwa engxenyeni yesibili ka-2022 futhi kamuva ngeke afake amachweba amabili angu-10 GbE. Ukuze uthole ulwazi olwengeziwe, bheka i-Dell Unity XT: Isingeniso SePlatform – A Detailed Review iphepha elimhlophe ku-Online Support.

Uma isiqaphi sezempilo sohlelo sibonisa ingxenye njengenephutha, xhumana nomhlinzeki wakho wesevisi.

Ukubuyisela ingxenye enephutha

Mayelana nalo msebenzi
Siyakwazisa ukubuyiswa kwezinto ezingasebenzi kahle zingakapheli izinsuku zebhizinisi ezi-5 (ngezimbuyiselo zase-US). Kumakhasimende akwamanye amazwe, sicela ubuyisele izinto ezingalungile zingakapheli izinsuku zebhizinisi ezingu-5-10. Yonke imiyalelo nezinto ezidingekayo ukuze ubuyisele ingxenye yakho enesici kunikezwe nengxenye yakho enhle yokuthunyelwa.

Izinyathelo

1. Pakisha ingxenye enephutha ebhokisini lokuthumela equkethe ingxenye yokumiselela, bese uvala ibhokisi.
2. Thumela ingxenye ehlulekile kumnikezeli wakho wesevisi njengoba kuchazwe emiyalweni eyayifakwe nengxenye yokufaka esikhundleni.
3. Ongakukhetha: Ukuze uthole ulwazi olwengeziwe mayelana nokubuyisela izingxenye ezishintshekayo zekhasimende, kusukela ku-Unisphere, chofoza okuthi Ukusekela > Miselela Amadrayivu Ediski, Izimpahla Zamandla, Nezinye Izingxenye > Buyisa Ingxenye ukuze ubonise imiyalelo yokubuyisela ingxenye.
   Uma isikrini sakho singabonisi inketho ethi Buyisela Ingxenye, thintana nomnikezeli wakho wesevisi ukuze uthole imiyalelo yokuthi yini okufanele uyenze ngokulandelayo.

Amanothi, izixwayiso, nezixwayiso

QAPHELA: INOTHI libonisa ulwazi olubalulekile olukusiza ukuthi usebenzise kangcono umkhiqizo wakho.
ISEXWAYISO: ISEXWAYISO sibonisa noma ukulimala okungenzeka ku-hardware noma ukulahleka kwedatha futhi sikutshela ukuthi ungayigwema kanjani inkinga.
ISEXWAYISO: ISEXWAYISO sibonisa amathuba okulimala kwempahla, ukulimala komuntu siqu, noma ukufa.

© 2016 – 2022 Dell Inc. noma izinkampani ezingaphansi kwayo. Wonke Amalungelo Agodliwe. I-Dell Technologies, i-Dell, nezinye izimpawu zokuthengisa yizimpawu zokuthengisa ze-Dell Inc. noma izinkampani ezingaphansi kwayo. Ezinye izimpawu zokuthengisa zingase zibe yizimpawu zokuthengisa zabanikazi bazo.

Amadokhumenti / Izinsiza

I-DELL Unity All Flash kanye ne-Unity Hybrid Customer Replacement Procedure [pdf] Umhlahlandlela Womsebenzisi I-Unity All Flash kanye ne-Unity Hybrid Customer Replacement Procedure, Ubumbano, Yonke I-Flash kanye ne-Unity Hybrid Replacement Customer Procedure, Inqubo Yokushintshwa Kwekhasimende Elihlanganisiwe, Inqubo Yokubuyisela

Izithenjwa

• Imaniwali yosebenzisayo