Okuqukethwe fihla
1 I-DECIMATOR MD-HX Cross Converter With Scalling And Frame Rate Conversion
2 Isingeniso
3 Ishadi Eligelezayo
4 IWARANTI YENKONZO
5 Amadokhumenti / Izinsiza
5.1 Izithenjwa
6 Okuthunyelwe Okuhlobene

I-DECIMATOR-loog

I-DECIMATOR MD-HX Cross Converter With Scalling And Frame Rate Conversion

I-DECIMATOR-MD-HX-Cross-Converter-With-Scaling-And-Frame-Rate-Conversion-produict

Isingeniso

Siyabonga ngokuthenga i-MD-HX HDMI / (3G/HD/SD)-SDI Cross Converter.
I-MD-HX iyisiguquli esiphathekayo ngempela, esihlanganisa i-LCD yethu entsha elula ukuyisebenzisa kanye nohlelo lokulawula izinkinobho. Lokhu kukunikeza ukufinyelela okulula kuzo zonke izici ezimangalisayo ebezingatholakali ngaphandle kwekhompyutha kuze kube manje. Izinsuku zokudlala ngama-dip switch ayinkimbinkimbi noma ukuzungeza ikhompuyutha ukushintsha isilungiselelo esilula azisekho.

I-MD-HX ihlanganisa izindlela ezine ezilandelayo:

  1. I-HDMI iye ku-SDI ngenkathi iguqulela i-SDI ku-HDMI ngasikhathi sinye
    2. I-HDMI ukuya ku-HDMI ngenkathi iguqulela i-SDI ku-SDI ngasikhathi sinye
    3. I-HDMI ukuya ku-SDI kanye ne-HDMI
    4. I-SDI ku-SDI kanye ne-HDMI

I-MD-HX ihlanganisa i-Down Up Cross Converter efanayo evela ku-MD-DUCC yethu ewina imiklomelo eminingi, evumela okokufaka kwe-HDMI noma kwe-SDI ukuthi kukalwe kanye/noma izinga lozimele liguqulelwe ezingeni elidingekayo. I-MD-HX isekela kokubili izinga le-3G no-B.

Le yunithi ihlanganisa:

  • Ukusekela kokubili kweleveli ye-3G no-B kokokufaka nokukhiphayo
  • Isithombe esivundlile kanye/noma esiqondile siphephuka ngesikali
  • 2 x (3G/HD/SD)-SDI Active Loop-Through noma Okukhiphayo Okwengeziwe
  • Ukuhlelwa kabusha kwe-Audio Pair
  • Ikesi le-Aluminium eliqinile
  • Imbobo ye-USB yokulawula nezibuyekezo ze-firmware
  • Isokhethi Yamandla Entsha Yensimbi Yensimbi Ye-DC
  • Ukunikezwa kwamandla, ikhebula le-HDMI nekhebula le-USB

Ishadi Eligelezayo

I-DECIMATOR-MD-HX-Cross-Converter-With-Scaling-And-Frame-Rate-Conversion (2)Amamenyu amakhulu
Uma iqinisa iyunithi izoqala kumenyu enkulu ikhomba Isimo Sokufaka.
Amamenyu amakhulu yilawa:

  1. Isimo Sokufaka
  2. Lawula
  3. Ukukala
  4. Umsindo
  5. Setha

Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla kumamenyu.
Ukungena kwimenyu cindezela inkinobho ethi ENTER.

Amanothi:

  1. Okuzenzakalelayo kugqanyiswe ngokuphuzi.
  2. Uma inketho ishintshwa, kuzovela u-S ogqanyisiwe kwesokudla phezulu kwesikrini se-LCD futhi uzonyamalala lapho izinketho zigcinwa ngemva kwemizuzwana engu-10. Gwema ukunika amandla iyunithi ngalesi sikhathi.
  3. Ungakwazi njalo ukubuyela ku-Main Menu ngokucindezela inkinobho ethi EMUVA kabili.
  4. Njengoba uhamba kumamenyu ushintsha amapharamitha, azosetshenziswa khona manjalo kusiginali yokuphumayo.
  5.  I-Scaler ne-DUC (ukuguqulwa kwe-Down Up Cross) zisetshenziswa ngokushintshana kuma-MENU. Isimo Sokufaka: (Ayinawo ama-SUB-MENU)

I-DECIMATOR-MD-HX-Cross-Converter-With-Scaling-And-Frame-Rate-Conversion (3)Okokufaka kubonisa isimo samanje se-SDI ne-HDMI kanye nesimo sefomethi yokuphuma kwe-DUC.

Lawula: (Inama-SUB-MENU) I-DECIMATOR-MD-HX-Cross-Converter-With-Scaling-And-Frame-Rate-Conversion (4)Uma kugqanyisiwe ku-Main Menu, cindezela inkinobho ethi FAKA ukuze ufake le-sub-menu.
Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla ngokulandelana kwazo kumamenyu ayi-8 angezansi bese ucindezela inkinobho ethi EMUVA ukuze ubuyele ku-Main Menu uma usuqedile.
Inani lamanje le-Sub Menu ngayinye liboniswa Efasiteleni Lepharamitha.

  1. Lawula / SDI OUT SOURCE (Ipharamitha)
    Lona umthombo wamanje wokukhiphayo kwe-SDI.
    Uma imenyu encane igqanyisiwe, cindezela u-ENTER ukuze uguqule emithonjeni elandelayo:
    1. I-SDI IN
    2. I-HDMI IN
    3. I-Scaler Output evela ku-Scaler
  2.  Lawula / I-HDMI OUT SOURCE (Ipharamitha)
    Lona umthombo wamanje wokuphuma kwe-HDMI.
    Uma imenyu encane igqanyisiwe, cindezela u-ENTER ukuze uguqule emithonjeni elandelayo:
    1. I-SDI IN
    2. I-HDMI IN
    3. Isikali
  3. Lawula / I-HDMI OUT TYPE (Ipharamitha)
    Lolu uhlobo lwamanje lokuphumayo kwe-HDMI.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule kulezi zinhlobo ezilandelayo:
    1. I-DVI RGB444 DVI-D RGB 4:4:4
    2. I-HDMI RGB444 2C HDMI RGB 4:4:4 eneziteshi ezi-2 zomsindo
    3. I-HDMI YCbCr444 2C HDMI YCbCr 4:4:4 eneziteshi ezi-2 zomsindo
    4. I-HDMI YCbCr422 2C HDMI YCbCr 4:2:2 eneziteshi ezi-2 zomsindo
    5. I-HDMI RGB444 8C HDMI RGB 4:4:4 eneziteshi ezi-8 zomsindo
    6. I-HDMI YCbCr444 8C HDMI YCbCr 4:4:4 eneziteshi ezi-8 zomsindo
    7. I-HDMI YCbCr422 8C HDMI YCbCr 4:2:2 eneziteshi ezi-8 zomsindo
  4.  Control / DUC Source (Ipharamitha)
    Lona umthombo wamanje wazo zombili i-Scaler.
    Uma imenyu encane igqanyisiwe, cindezela u-ENTER ukuze uguqule emithonjeni elandelayo:
    1. I-SDI IN
    2. I-HDMI IN
  5. Control / DUC REF (Ipharamitha)
    Lesi yinkomba yamanje yazo zombili i-Scaler.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
    1. UMTHOMBO
    2. MAHHALA-RUNUkusebenza kwamahhala ngaphandle kwereferensi
    3. I-SDI IN
    4. I-HDMI IN
  6. Lawula / Akukho Isiginali I-BackGD (Ine-SUB-MENU enepharamitha)
    Lona umbala wangemuva wembondela yesimo sesignali.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
  7. Ukulawula / Okuphumayo kwe-3G kungu-B (Ipharamitha)
    Lokhu kunquma ukuthi izinga lokuphumayo le-3G-SDI lingu-B esikhundleni sika-A.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
    1. Cha
    2. Yebo
  8. Ukulawula / Okukhiphayo 1 kuyiluphu (Ipharamitha)
    Lokhu kunquma ukuthi ingabe okukhiphayo 1 kuyikhophi yeluphu esebenzayo yokokufaka 1 noma okufanayo nokuphumayo 2.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
    1. Cha
    2. Yebo

Ukukala: (Inama-SUB-MENU)

I-DECIMATOR-MD-HX-Cross-Converter-With-Scaling-And-Frame-Rate-Conversion (5)Uma kugqanyisiwe ku-Main Menu, cindezela inkinobho ethi FAKA ukuze ufake le-sub-menu.
Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla ngokulandelana kwazo kumamenyu ayi-9 angezansi bese ucindezela inkinobho ethi EMUVA ukuze ubuyele ku-Main Menu uma usuqedile.
Inani lamanje le-Sub Menu ngayinye liboniswa Efasiteleni Lepharamitha.

  1. Isikali / Ifomethi Yokukhipha (Ine-SUB-MENU enepharamitha)
    Lena ifomethi yamanje yokukhiphayo ye-Scaler.
    Uma i-sub menu igqanyisiwe, cindezela inkinobho ethi ENTER ukuze ufake le-sub-menu.
    Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla kumafomethi wevidiyo angu-28 abalwe ngezansi kanye nenkinobho ethi EMUVA ukuze ushiye le SUB-MENU.
    1. SD 720x487i59.94 11. HD 1920x1080psf24 21. HD 1280x720p30
    2. SD 720x576i50 12. HD 1920x1080psf23.98 22. HD 1280x720p29.97
    3. ED 720x487p59.94 13. HD 1920x1080p30 23. HD 1280x720p25
    4. ED 720x576p50 14. HD 1920x1080p29.97 24. HD 1280x720p24
    5. I-HD 1920x1080i60 15. HD 1920x1080p25 25. HD 1280x720p23.98
    6. I-HD 1920x1080i59.94 16. HD 1920x1080p24 26. 3G 1920x1080p60
    7. I-HD 1920x1080i50 17. HD 1920x1080p23.98 27. 3G 1920x1080p59.94
    8. HD 1920x1080psf30 18. HD 1280x720p60 28. 3G 1920x1080p50
    9. HD 1920x1080psf29.97 19. HD 1280x720p59.94
    10. HD 1920x1080psf25 20. HD 1280x720p50
  2. Ukukala / SD2SD ASPECT (Ine-SUB-MENU enepharamitha)
    Lokhu ukuguqulwa kwe-aspect ratio esetshenziswa uma i-Scaler iguqulela i-SD kuya ku-SD.
    Uma i-sub menu igqanyisiwe, cindezela inkinobho ethi ENTER ukuze ufake le-sub-menu.
    Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla ekuguquleni kokubukeka kwe-31 okufakwe ohlwini ngezansi kanye nenkinobho ethi EMUVA ukuze ushiye le SUB-MENU.
    1. I-ANAMORPHIC (IN and OUT inesici esifanayo) 17. IN=14:9 ngo-4:3 PB,OUT=16:9 ngo-4:3 ZM
    2. KU=16:9 FS,OUT=14:9 ngo-16:9 LB 18. IN=14:9 ngo-4:3 PB,OUT=14:9 ngo-4:3 ZM
    3. KU=16:9 FS,OUT=4:3 ngo-16:9 LB 19. KU=14:9 no-16:9 LB,OUT=4:3 ngo-16:9 LB
    4. IN=16:9 FS,OUT=14:9 ngo-16:9 CC 20. IN=14:9 no-16:9 LB,OUT=14:9 ngo-16:9 CC
    5. IN=16:9 FS,OUT=4:3 ngo-16:9 CC 21. IN=14:9 no-16:9 LB,OUT=4:3 ngo-16:9 CC
    6. KU=16:9 no-14:9 PB,OUT=4:3 ngo-14:9 LB 22. KU=4:3 FS,OUT=16:9 kanye no-4:3 PB
    7. IN=16:9 ngo-14:9 PB,OUT=4:3 ngo-14:9 CC 23. KU=4:3 FS,OUT=14:9 kanye no-4:3 PB
    8. IN=16:9 ngo-14:9 PB,OUT=16:9 ngo-14:9 ZM 24. KU=4:3 FS,OUT=16:9 kanye no-4:3 ZM
    9. IN=16:9 ngo-4:3 PB,OUT=14:9 ngo-4:3 PB 25. KU=4:3 FS,OUT=14:9 kanye no-4:3 ZM
    10. IN=16:9 ngo-4:3 PB,OUT=16:9 ngo-4:3 ZM 26. KU=4:3 no-16:9 LB,OUT=14:9 ngo-16:9 LB
    11. IN=16:9 ngo-4:3 PB,OUT=14:9 ngo-4:3 ZM 27. IN=4:3 no-16:9 LB,OUT=14:9 ngo-16:9 CC
    12. KU=14:9 FS,OUT=16:9 kanye no-14:9 PB 28. IN=4:3 no-16:9 LB,OUT=4:3 ngo-16:9 CC
    13. KU=14:9 FS,OUT=4:3 ngo-14:9 LB 29. IN=4:3 no-14:9 LB,OUT=16:9 ngo-14:9 PB
    14. IN=14:9 FS,OUT=4:3 ngo-14:9 CC 30. IN=4:3 no-14:9 LB,OUT=4:3 ngo-14:9 CC
    15. KU=14:9 FS,OUT=16:9 kanye no-14:9 ZM 31. KU=4:3 no-14:9 LB,OUT=16:9 ngo-14:9 ZM
    16. IN=14:9 ngo-4:3 PB,OUT=16:9 ngo-4:3 PB
  3. Ukukala / SD2HD ASPECT (Ine-SUB-MENU enepharamitha)
    Lokhu ukuguqulwa kwe-aspect ratio esetshenziswa uma i-Scaler iguqulela i-SD kuya ku-HD.
    Uma i-sub menu igqanyisiwe, cindezela inkinobho ethi ENTER ukuze ufake le-sub-menu.
    Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla ekuguquleni kokubukeka kwe-11 okufakwe ohlwini ngezansi kanye nenkinobho ethi EMUVA ukuze ushiye le SUB-MENU.
    1. I-ANAMORPHIC (IN and OUT inesici esifanayo) 7. IN=14:9 ngo-4:3 PB,OUT=16:9 ngo-4:3 ZM
    2. IN=16:9 ngo-14:9 PB,OUT=16:9 ngo-14:9 ZM 8. KU=4:3 FS,OUT=16:9 kanye no-4:3 PB
    3. IN=16:9 ngo-4:3 PB,OUT=16:9 ngo-4:3 ZM 9. KU=4:3 FS,OUT=16:9 kanye no-4:3 ZM
    4. KU=14:9 FS,OUT=16:9 kanye no-14:9 PB 10. IN=4:3 no-14:9 LB,OUT=16:9 ngo-14:9 PB
    5. KU=14:9 FS,OUT=16:9 kanye no-14:9 ZM 11. KU=4:3 no-14:9 LB,OUT=16:9 ngo-14:9 ZM
    6. IN=14:9 ngo-4:3 PB,OUT=16:9 ngo-4:3 PB
  4. Ukukala / HD2SD ASPECT (Ine-SUB-MENU enepharamitha)
    Lokhu ukuguqulwa kwe-aspect ratio esetshenziswa lapho i-Scaler iguqulela i-HD ku-SD.
    Uma i-sub menu igqanyisiwe, cindezela inkinobho ethi ENTER ukuze ufake le-sub-menu.
    Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla ekuguquleni kokubukeka kwe-11 okufakwe ohlwini ngezansi kanye nenkinobho ethi EMUVA ukuze ushiye le SUB-MENU.
    1. I-ANAMORPHIC (IN and OUT inesici esifanayo) 7. IN=16:9 ngo-14:9 PB,OUT=4:3 ngo-14:9 CC
    2. KU=16:9 FS,OUT=14:9 ngo-16:9 LB 8. IN=16:9 ngo-14:9 PB,OUT=16:9 ngo-14:9 ZM
    3. KU=16:9 FS,OUT=4:3 ngo-16:9 LB 9. IN=16:9 ngo-4:3 PB,OUT=14:9 ngo-4:3 PB
    4. IN=16:9 FS,OUT=14:9 ngo-16:9 CC 10. IN=16:9 ngo-4:3 PB,OUT=16:9 ngo-4:3 ZM
    5. IN=16:9 FS,OUT=4:3 ngo-16:9 CC 11. IN=16:9 ngo-4:3 PB,OUT=14:9 ngo-4:3 ZM
    6. KU=16:9 no-14:9 PB,OUT=4:3 ngo-14:9 LB
  5. Ukukala / HD2HD ASPECT (Ine-SUB-MENU enepharamitha)
    Lokhu ukuguqulwa kwe-aspect ratio esetshenziswa lapho i-Scaler iguqulela i-HD ku-HD.
    Uma i-sub menu igqanyisiwe, cindezela inkinobho ethi ENTER ukuze ufake le-sub-menu.
    Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla ekuguquleni kokubukeka kwe-3 okufakwe ohlwini ngezansi kanye nenkinobho ethi EMUVA ukuze ushiye le SUB-MENU.
    1.  I-ANAMORPHIC (IN and OUT inesici esifanayo)
    2.  IN=16:9 ngo-14:9 PB,OUT=16:9 ngo-14:9 ZM
    3. IN=16:9 ngo-4:3 PB,OUT=16:9 ngo-4:3 ZM
  6. Ukukala / 1080i=1080psf (Ipharamitha)
    Lokhu kubonisa uma i-1080i ibonwa njenge-1080psf esikhundleni se-1080i. Njengoba i-1080i ne-1080psf inokwakheka kwefomethi efanayo.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
    1. Akukho okokufaka kwe-1080i = 1080i
    2. Yes1080i okokufaka = 1080psf
  7. Isikali / Isihlungi se-Horz (Ipharamitha)
    Lokhu kubonisa ileveli yesihlungi esivundlile se-anti-aliasing ngaphambi kwe-Scaler.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
    1.  Okuzenzakalelayo
    2. Lutho
    3. Phansi
    4. Maphakathi
    5. Phezulu
  8. Ukukala / Ileveli ye-Motion Det (Ipharamitha)
    Ileveli Yokutholwa Kokunyakaza inani lomehluko odingekayo phakathi kwamaphikseli kumafreyimu ahlukene ukuze kuboniswe ukunyakaza.
    Inani eliphakeme lilungile kuvidiyo ehamba kancane futhi inani eliphansi lingcono kuvidiyo enyakazayo ephezulu.
    Uma i-sub menu igqanyisiwe, cindezela inkinobho ethi ENTER ukuze ufake le-sub-menu.
    Cindezela izinkinobho ze-< kanye > ukuze wandise noma wehlise iyunithi emjikelezweni.
    Inani elizenzakalelayo lingu-0032, Umkhawulo omkhulu ngu-1023.
    Qaphela: Ipharamitha izobuyekezwa kuphela lapho ushiya le menyu engaphansi.
  9. Ukukala / Ukuphendukisa Okuvundlile (Ipharamitha)
    Lokhu kuguqula isithombe sibheke phezulu.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
    1. Cha
    2. Yebo
  10. Ukukala / Ukuphenduka Okuqondile (Ipharamitha)
    Lokhu kuguqula isithombe siqonde.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
    1. Cha
    2. Yebo

Umsindo: (Unama-SUB-MENU)I-DECIMATOR-MD-HX-Cross-Converter-With-Scaling-And-Frame-Rate-Conversion (6)

Uma kugqanyisiwe ku-Main Menu, cindezela inkinobho ethi FAKA ukuze ufake le-sub-menu.
Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla ngokulandelana kwazo kumamenyu ayi-12 angezansi bese ucindezela inkinobho ethi EMUVA ukuze ubuyele ku-Main Menu uma usuqedile.
Inani lamanje le-Sub Menu ngayinye liboniswa Efasiteleni Lepharamitha.

Amamenyu amancane alandelayo ayatholakala: 

  1. I-SDI Out Pair 1
  2. I-SDI Out Pair 2
  3. I-SDI Out Pair 3
  4.  I-SDI Out Pair 4
  5. I-SDI Out Pair 5
  6. I-SDI Out Pair 6
  7. I-SDI Out Pair 7
  8. I-SDI Out Pair 8
  9. I-HDMI Out Pair 1
  10.  I-HDMI Out Pair 2
  11. I-HDMI Out Pair 3
  12.  I-HDMI Out Pair 4

Imenyu encane ngayinye ikhetha umthombo wokubhanqwa komsindo we-SDI kanye ne-HDMI imiphumela.

Cindezela okuthi ENTER ukuze uguqulele kokulandelayo okukhethiwe kumenyu encane ngayinye:

  1. Iqembu 1 Ukubhangqa 1 (okuzenzakalelayo kwe-SDI Out Pair 1 kanye ne-HDMI Out Pair 1)
  2. Iqembu 1 Ukubhangqa 2 (okuzenzakalelayo kwe-SDI Out Pair 2 kanye ne-HDMI Out Pair 2)
  3. Iqembu 2 Ukubhangqa 1 (okuzenzakalelayo kwe-SDI Out Pair 3 kanye ne-HDMI Out Pair 3)
  4. Iqembu 2 Ukubhangqa 2 (okuzenzakalelayo kwe-SDI Out Pair 4 kanye ne-HDMI Out Pair 4)
  5. Iqembu lesi-3 Pair 1 (okuzenzakalelayo kwe-SDI Out Pair 5)
  6. Iqembu lesi-3 Pair 2 (okuzenzakalelayo kwe-SDI Out Pair 6)
  7. Iqembu lesi-4 Pair 1 (okuzenzakalelayo kwe-SDI Out Pair 7)
  8. Iqembu lesi-4 Pair 2 (okuzenzakalelayo kwe-SDI Out Pair 8)
  9. Valiwe

Ukumisa: (Inama-SUB-MENU)

I-DECIMATOR-MD-HX-Cross-Converter-With-Scaling-And-Frame-Rate-Conversion (1)Uma kugqanyisiwe ku-Main Menu, cindezela inkinobho ethi FAKA ukuze ufake le-sub-menu.
Cindezela izinkinobho ze-< kanye > ukuze uye kwesokunxele noma kwesokudla ngokulandelana kwazo kumamenyu ayi-4 angezansi bese ucindezela inkinobho ethi EMUVA ukuze ubuyele ku-Main Menu uma usuqedile.
Inani lamanje le-Sub Menu ngayinye liboniswa Efasiteleni Lepharamitha.

  1. SETHA / LAYISHA OKUNGEMPAMBILI (Isenzo)
    Uma kugqanyisiwe ku-Menu Window, cindezela inkinobho ethi ENTER ukuze ulayishe izilungiselelo ezizenzakalelayo. Idivayisi izosethwa kabusha ibe Isimo Sokokufaka Kwemenyu Eyinhloko.
  2. SETHA / ISIKHATHI SOKUVALWA kwe-LCD (Ipharamitha)
    Lesi yisikhathi esithathwayo ukuze isibani se-LCD sicishe ngemva kokucindezela inkinobho yokugcina.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule izikhathi ezilandelayo:
    1. imizuzwana
    2. imizuzwana engu-15
    3. imizuzwana engu-30
    4. 1 iminithi
    5.  5 imizuzu
    6. 10 imizuzu
    7. 30 imizuzu
    8.  Ungalokothi
  3. SETHA / BACK2STATUS TIME (Ipharamitha)
    Lesi isikhathi ngaphambi kokuthi imenyu enkulu ibuyiselwe Kusimo Sokufaka ngemva kokucindezela inkinobho yokugcina.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule izikhathi ezilandelayo:
    1.  imizuzwana engu-5
    2.  imizuzwana engu-15
    3.  imizuzwana engu-30
    4.  1 iminithi
    5. 5 imizuzu
    6. 10 imizuzu
    7.  30 imizuzu
    8.  Ungalokothi
  4.  SETHA / LONDOLOZA NGOKUZENZAKALELAYO (Ipharamitha)
    Le pharamitha izonquma ukuthi noma yiziphi izinguquko zizolondolozwa kumemori uma izinguquko zenziwe.
    Uma i-sub menu igqanyisiwe, cindezela u-ENTER ukuze uguqule okukhethiwe okulandelayo:
    1. Yebo
    2. Cha

IWARANTI YENKONZO

I-Decimator Design iqinisekisa ukuthi lo mkhiqizo ngeke ungabi nasici ezintweni zokwakha nomsebenzi isikhathi esiyizinyanga ezingama-36 kusukela ngosuku othengwe ngalo. Uma lo mkhiqizo ubonakala ungasebenzi phakathi kwalesi sikhathi sewaranti, Idizayini Ye-Decimator, ngokubona kwayo, izolungisa umkhiqizo onesici ngaphandle kwenkokhiso yezingxenye nomsebenzi, noma izohlinzeka ngomkhiqizo oshintshwayo ngokushintshanisa umkhiqizo onesici.
Ukuze usebenze ngaphansi kwalesi siqinisekiso, wena Khasimende, kufanele wazise i-Decimator Design mayelana nenkinga ngaphambi kokuphela kwesikhathi sewaranti futhi wenze amalungiselelo afanelekile okusebenza kwesevisi. Ikhasimende lizoba nesibopho sokupakisha nokuthumela umkhiqizo onesici esikhungweni sesevisi esiqokiwe esiqokwe i-Decimator Design, nezindleko zokuthumela zikhokhelwa kusengaphambili. I-Decimator Design izokhokhela ukubuyiselwa komkhiqizo kuKhasimende uma ukuthunyelwa kusendaweni engaphakathi kwezwe lapho isikhungo sesevisi ye-Decimator Design sitholakala khona. Ikhasimende lizoba nesibopho sokukhokha zonke izindleko zokuthumela, umshwalense, imisebenzi, izintela, kanye nanoma yiziphi ezinye izindleko zemikhiqizo ebuyiselwe kunoma iyiphi enye indawo.
Lesi siqiniseko ngeke sisebenze kunoma yikuphi ukukhubazeka, ukwehluleka noma umonakalo odalwe ukusetshenziswa okungafanele noma ukunakekelwa nokunakekelwa ngendlela engafanele. I-Decimator Design ngeke ibophezeleke ukunikeza isevisi ngaphansi kwalesi siqinisekiso a) ukulungisa umonakalo obangelwe yimizamo yabasebenzi ngaphandle kwe-Decimator Design abameleli yokufaka, ukulungisa noma ukusevisa umkhiqizo, b) ukulungisa umonakalo odalwe ukusetshenziswa okungafanele noma ukuxhunywa kumishini engahambelani. , c) ukulungisa noma imuphi umonakalo noma ukungasebenzi okudalwe ukusetshenziswa kwezingxenye noma izimpahla Zokuklama okungezona I-Decimator, noma d) ukusevisa umkhiqizo oshintshiwe noma ohlanganiswe neminye imikhiqizo uma umphumela walokho kuguqulwa noma ukuhlanganiswa wandisa isikhathi. nobunzima bokusevisa umkhiqizo.

I-MD-HX INDLELA YOKUSEBENZA 1.5
Copyright © 2015-2023 Decimator Design Pty Ltd, Sydney, Australia E&OE

FAQ

  • Q: Ngishintsha kanjani phakathi kwamamodi ahlukene ku-MD-HX Cross Converter?
    A: Ukushintsha phakathi kwamamodi ahlukene, sebenzisa i-Main Menu bese uzulazulela kumodi oyifunayo usebenzisa izinkinobho zokulawula.
  • Q: Ingabe i-MD-HX ingakwazi ukusekela kokubili izinga le-3G no-B?
    A: Yebo, i-MD-HX isekela kokubili amazinga we-3G A kanye ne-B wokuhambisana n.
  • Q: Ngifinyelela kanjani kuzilungiselelo zokuguqulwa kwe-aspect ratio ku-MD-HX?
    A: Ukuze ufinyelele izilungiselelo zokuguqulwa kwe-aspect ratio, zulazulela kumenyu Yokukala futhi usebenzise izinkinobho zokuzulazula ukuze ukhethe i-aspect ratio oyifunayo.

Amadokhumenti / Izinsiza

I-DECIMATOR MD-HX Cross Converter With Scalling And Frame Rate Conversion [pdf] Incwadi Yeziqondiso
I-MD-HX Cross Converter With Scalling And Frame Rate Conversion, MD-HX, Cross Converter With Scalling And Frame Rate Conversion, Scaling And Frame Rate Conversion, Kanye Nokuguqulwa Kwezinga Lozimele, Ukuguqulwa Kwezinga Lozimele, Ukuguqulwa Kwezinga

Izithenjwa

Okuthunyelwe Okuhlobene

Shiya amazwana

Ikheli lakho le-imeyili ngeke lishicilelwe. Izinkambu ezidingekayo zimakiwe *