I-DAUDIN GFGW-RM01N HMI Modbus TCP Connection
Ulwazi Lomkhiqizo
Umkhiqizo uwuhlu lokucushwa kwemojuli ye-I/O ekude
kuhlanganisa izingxenye ezihlukahlukene:
| Ingxenye No. | Ukucaciswa |
|---|---|
| I-GFGW-RM01N | I-Modbus TCP-to-Modbus RTU/ASCII, 4 Ports |
| I-GFMS-RM01S | I-Master Modbus RTU, 1 Port |
| I-GFDI-RM01N | Okokufaka Kwedijithali 16 Isiteshi |
| I-GFDO-RM01N | I-Digital Output 16 Channel / 0.5A |
| I-GFPS-0202 | Amandla angu-24V / 48W |
| I-GFPS-0303 | Amandla angu-5V / 20W |
Isango lisetshenziswa ngaphandle ukuxhumana ne-Beijer HMI's
imbobo yokuxhumana (i-Modbus TCP). Isilawuli esikhulu sinesibopho
ukuze uphathe futhi ulungiselele ngokuguquguqukayo amapharamitha we-I/O. Amandla
imojuli ingxenye ejwayelekile engakhethwa ngokusekelwe kumsebenzisi
okuthandayo.
Imiyalo yokusetshenziswa komkhiqizo
Ukuze uxhume ku-Beijer HMI, landela lezi zinyathelo:
- Qinisekisa ukuthi imojuli inikwe amandla futhi ixhunywe kumojula yesango usebenzisa intambo ye-Ethernet.
- Yethula isofthiwe ye-i-Designer.
- Khetha "Ukucushwa Kwemoduli ye-M Series".
- Chofoza kusithonjana "Setting Module".
- Faka ikhasi elithi “Imojuli yokusetha” lochungechunge lwe-M.
- Khetha uhlobo lwemodi ngokusekelwe kumojuli exhunyiwe.
- Chofoza "Xhuma".
- Lungiselela Izilungiselelo Ze-IP Yemojuli Yesango (Qaphela: Ikheli lasesizindeni se-inthanethi kufanele libe kusizinda esifanayo nesempahla yesilawuli).
- Setha Iqembu 1 Njengesigqila futhi usethe isango lokusebenzisa isethi yokuqala yezimbobo ze-RS485 ukuze uxhume kusilawuli esikhulu (GFMS-RM01N).
Uhlu Lokucushwa Kwemojuli ye-I/O yesilawuli kude
| Ingxenye No. | Ukucaciswa | Incazelo |
| I-GFGW-RM01N | I-Modbus TCP-to-Modbus RTU/ASCII, 4 Ports | Isango |
| I-GFMS-RM01S | I-Master Modbus RTU, 1 Port | Isilawuli Esiyinhloko |
| I-GFDI-RM01N | Okokufaka Kwedijithali 16 Isiteshi | Okokufaka kwedijithali |
| I-GFDO-RM01N | I-Digital Output 16 Channel / 0.5A | Ukukhishwa Kwedijithali |
| I-GFPS-0202 | Amandla angu-24V / 48W | Ukunikezwa kwamandla kagesi |
| I-GFPS-0303 | Amandla angu-5V / 20W | Ukunikezwa kwamandla kagesi |
Incazelo Yomkhiqizo
- Isango lisetshenziswa ngaphandle ukuxhumana ne-Beijer HMI's communication port (Modbus TCP)
- Isilawuli esiyinhloko siphethe ukuphathwa nokucushwa okuguquguqukayo kwamapharamitha we-I/O nokunye.
- Imojuli yamandla ijwayelekile kuma-I/O akude futhi abasebenzisi bangakhetha imodeli noma uhlobo lwemojuli yamandla abayithandayo.
Izilungiselelo zepharamitha yesango
Lesi sigaba sinemininingwane yokuthi ungaxhuma kanjani ku-Beijer HMI. Ukuze uthole ulwazi oluningiliziwe, sicela ubheke i-iO-GRID M Series Product Manual
Ukusethwa kohlelo lwe-i-Designer
- Qiniseka ukuthi imojuli inikwe amandla futhi ixhunywe kumojula yesango usebenzisa ikhebula ye-Ethernet
- Chofoza ukuze uqalise isofthiwe
- Khetha okuthi “M Series Module Configuration”
- Chofoza kusithonjana "Setting Module".
- Faka ikhasi elithi “Imojuli yokusetha” lochungechunge lwe-M
- Khetha uhlobo lwemodi ngokusekelwe kumojuli exhunyiwe
- Chofoza okuthi "Xhuma"
- Izilungiselelo ze-IP zemojuli yesango
- Qaphela: Ikheli le-IP kufanele libe kusizinda esifanayo nesemishini yesilawuli
- Izindlela Zokusebenza Zemojuli Yesango
- Qaphela: Setha Iqembu 1 Njengesigqila futhi usethe isango ukuze usebenzise isethi yokuqala yembobo ye-RS485 ukuze uxhume kusilawuli esikhulu (GFMS-RM01N)
Isethaphu yokuxhuma kwe-Beijer HMI
Lesi sahluko sichaza indlela yokusebenzisa uhlelo lukanjiniyela we-iX ukuze uxhume i-Beijer HMI esangweni futhi wengeze i-I/O eyirimothi. Ukuze uthole ulwazi oluningiliziwe, sicela ubheke ku-iX Developer Manual
I-Beijer HMI Hardware Connection
- Imbobo yokuxhuma ingakwesokudla ngezansi komshini. Kukhona i-LAN A ne-LAN B
Ikheli le-IP le-Beijer HMI kanye nokusethwa koxhumano
- Uma i-HMI isinikwe amandla, cindezela esikrinini se-HMI ukuze ufake imenyu yesevisi bese uchofoza ku-“IP Settings”.
- Chofoza okuthi “Cacisa Ikheli Le-IP” bese usetha “Ikheli Le-IP” esizindeni esifanayo nesizinda sesango kokuthi 192.168.1.XXX.
- Yethula i-iX Developer bese ukhetha okuthi “MODICON” kanye “neModbus Master” ukuze wengeze isilawuli esisha
- Chofoza kuthebhu ethi “Umlawuli” ukuze ufake ikhasi lokusetha isilawuli. Khetha isilawuli bese uchofoza "Izilungiselelo"
- Ukusethwa kwendlela yokuxhumana
- Ⓐ Kumenyu yokudonsela phansi ethi “Imodi Yokuxhumana”, khetha okuthi “Ethernet TCP/ IP”
- Ⓑ Setha inombolo yesiteshi ezenzakalelayo
- Ⓒ Kumenyu eyehlayo ethi “Modbus protocol”, khetha “RTU”
- Ⓓ Kumenyu yokudonsela phansi ethi “32-bit World mapping”, khetha u-“Little-endian”
- Ⓔ Kumenyu yokudonsela phansi ethi “Phoqelela ikhodi yokusebenza 0x10”, khetha okuthi “Vumela”
- Ⓕ Kusuka kumenyu yokudonsela phansi ethi "Ukushintshaniswa kwezintambo", khetha okuthi "Khubaza"
- Chofoza "Iziteshi" bese usetha "Isiteshi" kanye "nekheli le-IP" ngokufanayo nesango
- Chofoza ku-"Tab" ukuze ufake ikhasi lesilungiselelo sethebhu. Okulandelayo, chofoza okuthi “Okusha” bese usetha indawo yerejista yethebhu
- I-GFDI-RM01N yokuqala ye-iO-GRID M inekheli lokuqala ku-44096
- I-GFDO-RM01N yokuqala ye-iO-GRID M inekheli lokuqala ku-48192
Amadokhumenti / Izinsiza
 |
I-DAUDIN GFGW-RM01N HMI Modbus TCP Connection [pdf] Incwadi Yeziqondiso GFGW-RM01N HMI Modbus TCP Connection, GFGW-RM01N, HMI Modbus TCP Connection, Modbus TCP Connection, TCP Connection, Connection |