I-Danfoss UL-HGX12e CO2 LT Reciprocating Compressor

Ulwazi Lomkhiqizo

Umkhiqizo uyi-compressor ephindaphindayo eyenzelwe izinhlelo zokusebenza ze-CO2. Itholakala ngamamodeli ahlukene: UL-HGX12e/20 ML 0,7 CO2 LT, UL-HGX12e/30 ML 1 CO2 LT, UL-HGX12e/40 ML 2 CO2 LT, UL-HGX12e/20 S 1 CO2 LT, UL -HGX12e/30 S 2 CO2 LT, kanye ne-UL-HGX12e/40 S 3 CO2 LT. I-compressor ikhiqizwa yi-Bock GmbH eJalimane.

Imiyalo yokusetshenziswa komkhiqizo

Ukuphepha:
Landela imiyalelo yokuphepha enikezwe kumanuwali ukuze uvimbele ukulimala nokulimala kwempahla.

Uxhumano lukagesi:

• Bheka isigaba 5 ukuze uthole ulwazi ngokuxhunywa kukagesi.
• Landela imiyalelo yokukhethwa kothintana nemoto.
• Xhuma injini yokushayela njengoba kuchazwe esigabeni

Uma usebenzisa umdwebo wesekethe oyisiqalo esiqondile, landela imiyalelo esesigabeni esithi Ngeyunithi yokuqalisa i-electronic INT69 G, bheka isigaba ukuze uthole ulwazi ngoxhumo.

Ukuhlola Okusebenzayo:
Yenza uhlolo olusebenzayo lweyunithi ye-electronic trigger INT69 G njengoba kuchazwe esigabeni

I-Oil Sump Heater:
Uma kudingeka, landela imiyalelo esesigabeni 5.7 sokufaka nokusebenzisa isifudumezi se-sump yamafutha.

Ama-Frequency Converters:
Bheka isigaba 5.8 ngokukhethwa nokusebenza kweziguquli zefrikhwensi.

Idatha Yezobuchwepheshe:
Bheka isigaba 8 ukuze uthole imininingwane enemininingwane yobuchwepheshe kwi-compressor.

Ubukhulu kanye nokuxhumana:
Ukuze uthole ulwazi mayelana nobukhulu nokuxhumana bheka isigaba

Isimemezelo Sokwesekwa:
Funda isimemezelo sokwesekwa esinikezwe esigabeni

UL-Isitifiketi Sokuthobelana:
Review i-UL-Sitifiketi Sokuthobelana esigabeni

Qaphela: Izinguquko ezingagunyaziwe noma ukuguqulwa komkhiqizo okungafakwanga kumanuwali akuvunyelwe futhi kuzochitha iwaranti. Qinisekisa ukuthi imanuwali iyatholakala kubasebenzi abasebenza futhi banakekele umkhiqizo, futhi uyidlulisele ekhasimendeni lokugcina lapho lifaka i-compressor.

Isandulelo

INGOZI: Ingozi yezingozi.

Ama-compressor afaka isiqandisi imishini ecindezelwayo futhi, kanjalo, funa ukuqapha nokunakekelwa okuphakeme ekuphatheni. Ukuhlanganiswa okungalungile nokusetshenziswa kwe-compressor kungaholela ekulimaleni okukhulu noma okubulalayo!

• Ukuze ugweme ukulimala okubi kakhulu noma ukufa, gcina yonke imiyalelo yokuphepha equkethwe kule miyalo ngaphambi kokuhlanganisa nangaphambi kokusebenzisa i-compressor! Lokhu kuzogwema ukungaboni ngaso linye futhi kuvimbele ukulimala nokulimala okungathi sína noma okubulalayo!
• Ungalokothi usebenzise umkhiqizo ngendlela engafanele kodwa kuphela njengoba kunconywe yile ncwadi!
• Bheka wonke amalebula okuphepha komkhiqizo!
• Bheka amakhodi okwakha endawo ukuze uthole izidingo zokufakwa!

Izinhlelo zokusebenza ze-CO2 zidinga uhlobo olusha ngokuphelele lwesistimu nokulawula. Azisona isixazululo esijwayelekile sokushintsha amagesi ka-F. Ngakho-ke, siveza ngokucacile ukuthi yonke imininingwane kule miyalo yomhlangano inikezwe ngokwezinga lethu lamanje lolwazi futhi ingase ishintshe ngenxa yokuthuthuka okuqhubekayo. Izimangalo ezingokomthetho ezisekelwe ekunembeni kolwazi azikwazi ukwenziwa nganoma yisiphi isikhathi futhi azifakwa ngokusobala. Izinguquko ezingagunyaziwe kanye nokulungiswa komkhiqizo okungafakwanga kule manuwali akuvunyelwe futhi kuzochitha iwaranti! Le ncwajana yeziqondiso iyingxenye ephoqelekile yomkhiqizo. Kufanele itholakale kubasebenzi abasebenzisa futhi banakekele lo mkhiqizo. Kufanele idluliselwe kukhasimende lokugcina kanye neyunithi lapho i-compressor efakwe khona. Lo mbhalo ungaphansi kwelungelo lobunikazi le-Bock GmbH, Germany. Ulwazi olunikezwe kuleli bhukwana lungashintsha futhi lube ngcono ngaphandle kwesaziso.

Ukuphepha

Ukuhlonza imiyalelo yokuphepha:

INGOZI	Ibonisa isimo esiyingozi, okuthi uma singagwenywa, sibangele ukulimala okusheshayo noma okubi kakhulu
ISEXWAYISO	Ibonisa isimo esiyingozi, okuthi uma singagwenywa, sibangele ukulimala okubi noma ukufa
ISEXWAYISO	Ibonisa isimo esiyingozi lapho, uma singagwenywa, singase sibangele ukulimala okubi kakhulu noma okuncane.
ISAZISO	Ibonisa isimo lapho, uma singagwenywa, singadala umonakalo wempahla
ULWAZI	Ulwazi olubalulekile noma amathiphu okwenza umsebenzi ube lula

Imiyalelo yokuphepha ejwayelekile

INGOZI: Ingozi yengozi. Ama-compressor afaka isiqandisi imishini enengcindezi ngakho-ke adinga ukuqapha nokunakekelwa okukhethekile ekuphatheni. Ubukhulu bokucindezela obuvunyelwe akumele kweqiwe, ngisho nangezinhloso zokuhlola.

INGOZI: Ingozi yokuqunjelwa!

I-CO2 iyigesi engashi, ene-asidi, engenambala, nengenaphunga futhi inzima kunomoya. Ungalokothi ukhulule amavolumu abalulekile we-CO2 noma konke okuqukethwe kwesistimu emakamelweni avaliwe! Ukufakwa kokuphepha kuklanywe noma kulungiswe yi-EN 378-2 noma amazinga afanele okuphepha kazwelonke.

ISEXWAYISO: Ingozi yokusha!

• Ngokuya ngezimo zokusebenza, amazinga okushisa angaphezu kuka-140°F (60°C) ohlangothini lwengcindezi noma ngaphansi kuka-32°F (0°C) ohlangothini lokumunca angafinyelelwa. • Gwema ukuthintana nesiqandisi ngaphansi kwanoma yiziphi izimo. Ukuthintana neziqandisi kungaholela ekushiseni okukhulu nokucasuka kwesikhumba.

Ukusetshenziswa okuhlosiwe

ISEXWAYISO: I-compressor ingase ingasetshenziswa ezindaweni ezingase zibe neziqhumane!

Le miyalo yomhlangano ichaza inguqulo evamile yama-compressor aqanjwe esihlokweni esakhiwe ngu-Bock. Ama-compressor efrijini e-Bock ahloselwe ukufakwa emshinini (ngaphakathi kwe-EU ngokuya nge-EU Directives 2006/42/EC Machinery Directive kanye ne-2014/68/EU Pressure Equipment Directive, ngaphandle kwe-EU ngokuvumelana nemithetho nemihlahlandlela kazwelonke efanele). Ukugunyazwa kuvunyelwe kuphela uma ama-compressor efakwe yile miyalo yomhlangano futhi lonke uhlelo oluhlanganiswe kulo luhloliwe futhi lwavunyelwa yimithetho yezomthetho. Ama-compressor ahloselwe ukusetshenziswa ne-CO2 ezinhlelweni ezibhaliwe kanye/noma ezibucayi ngokuhambisana nemikhawulo yohlelo lokusebenza.

Isiqandisi esishiwo kule miyalo kuphela esingasetshenziswa! Noma yikuphi okunye ukusetshenziswa kwe-compressor akuvunyelwe!

Iziqu ezidingekayo kumuntu

ISEXWAYISO: Izisebenzi eziqeqeshwe ngokungafanele zibangela ingozi yezingozi, umphumela uba ukulimala okubi kakhulu noma okubulalayo. Ngakho-ke umsebenzi kuma-compressor kufanele wenziwe kuphela izisebenzi ezineziqu ezibalwe ngezansi:

• isb, uchwepheshe weziqandisi noma unjiniyela wemishini yesiqandisi.
• Kanye nobungcweti abanokuqeqeshwa okufanayo, okuvumela abasebenzi ukuthi bahlangane, bafake, banakekele futhi balungise amasistimu efriji nama-air-conditioning.
• Abasebenzi kumele bakwazi ukuhlola umsebenzi okumele wenziwe futhi babone noma yiziphi izingozi ezingaba khona.

Incazelo Yomkhiqizo

Incazelo emfushane

• I-semi-hermetic two-cylinder reciprocating compressor ene-suction gas-cooled drive motor.
• Ukugeleza kwesiqandisi esifakwe ku-evaporator siholwa phezu kwenjini futhi sihlinzekela ukupholisa okuqinile. Ngakho injini ingagcinwa ezingeni lokushisa eliphansi uma kuqhathaniswa, ikakhulukazi ngesikhathi somthwalo omkhulu.
• Iphampu kawoyela engancikile ekujikelezeni kokunikezwa kukawoyela okuthembekile nokuphephile.
• Ivalvu yokucindezela eyodwa ngayinye ohlangothini oluphansi noluphezulu lwengcindezi, ephumela emkhathini lapho amazinga okucindezela okuphezulu ngokungemukeleki efinyelelwa.

Ubukhulu kanye namanani okuxhumana angatholakala eSahlukweni 9

Incazelo Yomkhiqizo

I-Nameplate (isbample)

Qaphela imikhawulo yemidwebo yohlelo lokusebenza!
Izinsiza zikagesi zingashintsha isigaba sokuvikela se-IP!

Thayipha ukhiye (isbample)

• ¹) HG: I-Hermetic Gas-Cooled (i-suction gas-cooled)
• ²) X: I-Ester oil charge
• ³) ML: Ukubanda okujulile emazingeni okushisa okuhwamuka aphansi naphakathi
• S: Okokulawula imvamisa kanye nemikhawulo enwetshiwe yohlelo lokusebenza

Izindawo zokufaka isicelo

Iziqandisi

• R744: CO2 (iyadingeka ikhwalithi ye-CO2 engu-4.5 (< 5 ppm H2O))

Inkokhelo kawoyela Ama-compressor agcwaliswa efekthri ngohlobo lukawoyela olulandelayo: BOCK lub E85

ISAZISO: Ukulimala kwempahla kungenzeka. Izinga lamafutha kumele libe sengxenyeni ebonakalayo yengilazi yokubona; umonakalo ku-compressor ungenzeka uma ugcwele ngokweqile noma ungagcwalisi kakhulu!

Imikhawulo yohlelo lokusebenza

QAPHELA Ukusebenza kwe-Compressor kungenzeka ngaphakathi kwemikhawulo yokusebenza. Lezi zingatholakala kuthuluzi lokukhetha le-Bock compressor (VAP) ngaphansi kwe-vap.bock.de. Qaphela ulwazi olunikezwe lapho.

• Izinga lokushisa elivumelekile le-ambient -4°F … 140°F (-20 °C) – (+60 °C).
• Ubukhulu. izinga lokushisa elivumelekile lokuphela kokukhipha elingu-320°F (160 °C).
• Okuncane. izinga lokushisa lokuphela kokukhipha ≥ 122°F (50 °C).
• Okuncane. izinga lokushisa likawoyela ≥ 86°F (30 °C).
• Ubukhulu. imvamisa yokushintsha evumelekile 12x/h.
• Isikhathi esincane sokusebenza esiyimizuzu emi-3. isimo sokuzinzile (ukusebenza okuqhubekayo) kufanele kufinyelelwe.

Gwema ukusebenza okuqhubekayo ebangeni elilinganiselwe.

Ubukhulu. ingcindezi yokusebenza evumelekile (LP/HP)1): 1450/1450 psig, 100/100 bar

• 1) LP = Ukucindezela okuphansi
• HP = Ukucindezela okuphezulu

Ngokusebenza nge-frequency converter:

• Uhla lokulawula lwe-compressor luyi-15 - 50 Hz (K Design 15 - 60 Hz).
• Ubukhulu bamanje namandla asetshenziswayo akumele kudlulwe. Esimeni sokusebenza ngaphezu kwefrikhwensi yamapayipi amakhulu, umkhawulo wohlelo lokusebenza unganqunyelwa
• Sebenzisa i-thermostat yokuvikela ukushisa.
• Ukubuyiswa kukawoyela ngezikhathi eziphansi kufanele kuhlinzekwe. Lapho usebenza ku-vacuum range, kunengozi yomoya ongena ohlangothini lokumunca. Lokhu kungabangela ukusabela kwamakhemikhali, ukunyuka kwengcindezi ku-condenser, kanye nezinga lokushisa elicindezelwe eliphakeme. Vimbela ukungena komoya ngazo zonke izindleko!

Ukuhlanganiswa kwe-compressor

ULWAZI: Ama-compressor amasha agcwaliswa efekthri nge-inert gas. Shiya le nkokhelo yesevisi ku-compressor isikhathi eside ngangokunokwenzeka futhi uvimbele ukungena komoya. Hlola i-compressor ngomonakalo wezokuthutha ngaphambi kokuqala noma yimuphi umsebenzi.

Isitoreji kanye nezinto zokuhamba

• Isitoreji ku-(-30°C) – (+70°C), umswakama ophezulu ovumelekile ohlobene no-10% – 95%, akukho ukujiya
• Ungagcini endaweni ebolayo, enothuli, enomhwamuko noma endaweni evuthayo.
• Sebenzisa i-eyelet yezokuthutha.
• Ungaphakamisi ngesandla!
• Sebenzisa igiya lokuphakamisa!

Siyalungiselela

ISAZISO: Okunamathiselwe (isib. abanikazi bamapayipi, amayunithi engeziwe, izingxenye zokubopha, njll.) ngqo ku-compressor akuvumelekile!

• Nikeza imvume eyanele yomsebenzi wokulungisa.
• Qinisekisa ukungena kwe-compressor eyanele.
• Ungawusebenzisi endaweni ebolayo, enothuli, damp umkhathi noma indawo evuthayo.
• Setha endaweni elinganayo noma umthamo wokuthwala uhlaka.
• I-compressor eyodwa okungcono kakhulu ekudlidlizeni damper.
• Amasekhethi e-Duplex nama-parallel ahlala eqinile.

Ukuhlanganiswa kwe-compressor

Izixhumanisi zamapayipi

 

 

ISAZISO: Umonakalo kungenzeka. Ukushisa okuphezulu kungalimaza i-valve. Ngakho-ke khipha izisekelo zamapayipi ku-valve ukuze zihlanganiswe bese upholisa umzimba we-valve ngesikhathi nangemuva kokusoda. I-solder kuphela esebenzisa igesi ye-inert ukuvimbela imikhiqizo ye-oxidation (isikali).

• I-soldering yezinto ezibonakalayo / uxhumano lwe-welding: S235JR
• Ukuxhunywa kwamapayipi kuthweswe iziqu ngaphakathi kobubanzi ukuze kusetshenziswe amapayipi anobukhulu obujwayelekile.
• Ama-diameter okuxhumana ama-valve avaliwe akalwe ngokukhipha okuphezulu kwe-compressor. Ingxenye yangempela yepayipi edingekayo kufanele ithweswe iziqu futhi ifaniswe nokuphumayo. Okufanayo kusebenza kuma-valve angabuyi.

Amapayipi

• Amapayipi kanye nezingxenye zesistimu kufanele kuhlanzeke futhi kome ngaphakathi futhi kungabi nesikali, i-swarf, kanye nezingqimba zokugqwala ne-phosphate. Sebenzisa kuphela izingxenye ezivalwe nge-hermetically.
• Faka amapayipi ngendlela efanele. Izinxephezelo zokudlidliza ezifanele kufanele zihlinzekwe ukuze kuvinjwe amapayipi ukuthi angaqhekeki futhi aphulwe ukudlidliza okukhulu.
• Qiniseka ukuthi uwoyela ubuya ngendlela efanele.
• Gcina ukulahlekelwa kwengcindezi kube ubuncane obuphelele.

Ama-valve okuvala i-Flange (HP/LP)

ISEXWAYISO: Ingozi yokulimala. I-compressor kufanele icindezeleke ngokuxhuma i-A1 ne-B1 ngaphambi kokuqala noma yimuphi umsebenzi nangaphambi kokuxhuma kusistimu yesiqandisi.

Ukubeka imigqa yokuncela nokucindezela

ISAZISO:

• Ukulimala kwempahla kungenzeka. Amapayipi angafakwanga kahle angabangela imifantu nezinyembezi, okungaholela ekulahlekelweni kwesiqandisi.
• Ukuhlelwa okufanelekile kwemigqa yokumunca kanye neyokucindezela ngokuqondile ngemva kokuba i-compressor iyingxenye yokusebenza kahle nokudlidliza kwesistimu.

Umthetho wesithupha:
Ngaso sonke isikhathi beka ingxenye yepayipi yokuqala kusukela ku-valve yokuvala iye phansi futhi ihambisane ne-drive shaft.

Ukusebenza kwama-valve wokuvala

• Ngaphambi kokuvula noma ukuvala i-valve yokuvala, khulula i-valve spindle seal cishe. ¼ yokujika ngokuphambene newashi.
• Ngemva kokuvula i-valve yokuvala, qinisa kabusha i-valve spindle spindle seal ngokwewashi.

Imodi yokusebenza yoxhumo lwesevisi olukhiyayo
(isbample)

Ngemva kokuvula i-spindle, ngokuvamile faka ikepisi lokuvikela ukuphotha futhi uqinise nge-40 - 50 Nm. Lokhu kusebenza njengesici sokuvala okwesibili ngesikhathi sokusebenza.

Ukubuya kwamafutha
Ukuqinisekisa ukuthi umsebenzi wokubuyisela uwoyela uzosebenza ngendlela enokwethenjelwa kungakhathaliseki ukuthi yiluphi uhlobo lokucushwa kwesistimu oyisebenzisayo, i-Bock incoma ukuthi kuhlanganiswe izihlukanisi zikawoyela noma okokusebenza kokuqapha izinga likawoyela. Uxhumano lwe-“O” seluvele lutholakala efekthri ukuze kufakwe ingxenye eyengeziwe yokuqapha izinga likawoyela. Amafutha kufanele abuyiselwe kusuka kusihlukanisi samafutha ku-compressor ngoxhumano lwe- "D1" oluhlinzekwe le njongo ku-compressor.

Isihlungi sepayipi lokudonsa
Kuzinhlelo ezinamapayipi amade nezinga eliphakeme lokungcoliswa, isihlungi esisohlangothini lokumunca siyanconywa. Isihlungi kufanele sivuselelwe kuye ngezinga lokungcola (ukuncipha kokuncipha komfutho).

 

Ukuxhunywa kukagesi

INGOZI Ingozi yokushaqeka kukagesi! Ivolumu ephezulutage! Yenza umsebenzi kuphela lapho uhlelo lukagesi lunqanyulwa kumandla kagesi!

ISAZISO: Lapho unamathisela izesekeli ngekhebula likagesi, irediyasi yokugoba encane engu-3 x ububanzi bekhebula kufanele igcinwe ukuze kubekwe ikhebula.

ULWAZI: Xhuma i-compressor motor ngomdwebo wesifunda (bheka ngaphakathi kwebhokisi letheminali).

• Sebenzisa indawo yokungena yekhebula efanelekile yohlobo olulungile lokuvikela (bheka i-nameplate) ukuze uhambise izintambo ebhokisini letheminali. Faka ama-reliefs we-strain futhi uvimbele ama-chafe marks kumakhebuli.
• Qhathanisa i-voltage namavelu efrikhwensi anedatha yokuphakelwa kwamandla kagesi.

Xhuma injini kuphela uma la manani afana.

Ulwazi lokuxhumana nokukhethwa koxhumana naye

Zonke izinto zokuvikela kanye namayunithi okushintsha noma okuqapha kufanele afakwe yimithetho zokuphepha yendawo kanye nemininingwane emisiwe (isb. i-VDE) kanye nolwazi lomkhiqizi.

Kudingeka amaswishi okuvikela izimoto!
Izixhumi zezimoto, imigqa yokuphakelayo, amafuse, namaswishi okuvikela izimoto kufanele kukalwe ngokusekelwe kubuningi bamanje obusebenzayo (bona iplate yegama). Ukuze uthole ukuvikelwa kwemoto sebenzisa idivayisi yokuvikela ukulayishwa okuningi ethembele manje futhi ebambezeleke ngesikhathi ukuze ugade zonke izigaba ezintathu. Setha idivayisi yokuvikela ukugcwala kakhulu ukuze isebenze phakathi namahora angu-2 uma kunezikhathi ezingu-1.2 zobukhulu obukhulu. isebenza njengamanje.

Ukuxhumana kwenjini yokushayela
I-compressor yakhelwe ngenjini yamasekhethi enkanyezi-delta.

Ukuqala kwe-Star-delta kungenzeka kuphela ngevolthi engu-280 VtagUkunikezwa.

Example:

ULWAZI

• Ama-insulators anikeziwe kufanele afakwe ngokuhambisana nemifanekiso njengoba kukhonjisiwe.
• Ukuxhumeka exampokubonisiwe okuncane kubhekisela enguqulweni evamile. Endabeni ye-special voltages, imiyalelo enamathiselwe ebhokisini letheminali iyasebenza.

QAPHELA Ukuhluleka ukwenza lokhu kubangela izinkambu ezijikelezayo eziphikisanayo futhi kubangele ukulimala kwemoto. Ngemuva kokuthi i-motor iqale ngokujika kancane koku-1, i-motor 2 kufanele ivulwe ngemva kokubambezeleka okukhulu komzuzwana owodwa. Ukwehluleka ukuhambisana nakho kungaphazamisa impilo yesevisi yemoto.

Umdwebo womjikelezo wesiqalo esiqondile 280 V Δ / 460 VY

BP1	Imonitha yokuphepha enengcindezi ephezulu
BP2	Uchungechunge lokuphepha (ukuqapha okuphezulu/kwengcindezi ephansi)
I-BT1	Cold conductor (PTC sensor) motor winding
I-BT2	I-thermostat yokuvikela ukushisa (inzwa ye-PTC)
I-BT3	Khipha iswishi (i-thermostat)
EB1	Uwoyela sump heater
EC1	I-Compressor motor

FC1.1	Iswishi yokuvikela imoto
FC2	Lawula i-fuse yesekethe yamandla
IINT69 G	Iyunithi yokuqalisa ye-elekthronikhi i-INT69 G
QA1	Iswishi eyinhloko
QA2	I-Net switch
SF1	Isilawuli voltage ukushintsha

Iyunithi yokuqalisa ye-elekthronikhi i-INT69 G
I-compressor motor ifakwe izinzwa zokushisa ezibandayo ze-conductor (PTC) ezixhunywe kuyunithi ye-electronic trigger unit INT69 G ebhokisini letheminali. Esimeni sokushisa okweqile ku-motor winding, i-INT69 G ivala isixhumi semoto. Uma isipholile, ingaqalwa kabusha kuphela uma ukukhiya kwe-elekthronikhi kwe-relay ephumayo (amatheminali B1+B2) kukhishwa ngokuphazamisa ivolumu yokunikezela.tage. Uhlangothi lwegesi eshisayo ye-compressor lungaphinde luvikelwe ekushiseni ngokweqile kusetshenziswa ama-thermostat okuvikela ukushisa (isisekeli).

Iyunithi iyahamba lapho kuvela izimo zokusebenza ezigcwele kakhulu noma ezingamukeleki. Thola futhi ulungise imbangela.

ULWAZI Okukhiphayo kokushintshaniswa kwe-relay kusetshenziswa njengokuxhumana okushintshwayo okuntantayo. Le sekhethi kagesi isebenza ngokwesimiso samanje esithule, okungukuthi i-relay yehlela endaweni engenzi lutho futhi yenze i-motor contactor ingasebenzi ngisho noma kwenzeka inzwa inqamuka noma isekethe evuliwe.

Uxhumo lweyunithi yokuqalisa i-INT69 G INFO
Xhuma iyunithi yokuqalisa i-INT69 G ngomdwebo wesekethe. Vikela iyunithi yokuqalisa ngefuse yesenzo esilibaziseke (FC2) yobukhulu. 4 A. Ukuqinisekisa umsebenzi wokuvikela, faka iyunithi yokuqalisa njengento yokuqala kusekethe yamandla okulawula.

ISAZISO: Kala amasekhethi i-BT1 ne-BT2 (inzwa ye-PTC) akumele ihlangane nevolumu yangaphandletage. Lokhu kuzocekela phansi izinzwa zeyunithi ye-INT69 G ne-PTC.

Uxhumano lwangaphandle INT69 G
Ngaphambi kokuthumela, ngemva kokuxazulula inkinga noma ukwenza izinguquko kumjikelezo wamandla okulawula, hlola ukusebenza kweyunithi yokuqalisa. Yenza lokhu kuhlola usebenzisa isihloli sokuqhubeka noma igeji.

	Isilinganiso isimo	I-Relay isikhundla
1.	Isimo sokungasebenzi	11-12
2.	Ukuvula i-INT69 G	11-14
3.	Susa isixhumi se-PTC	11-12
4.	Faka isixhumi se-PTC	11-12
5.	Setha kabusha ngemva kokuvula amapayipi amakhulu	11-14

Uwoyela sump heater
Ukuze ugweme ukulimala kwe-compressor, i-compressor kufanele ifakwe i-oil sump heater.

ISAZISO: I-heater sump yamafutha ngokuvamile kufanele ixhunywe futhi isetshenziswe!

• Ukusebenza: I-oil sump heater isebenza lapho i-compressor imile. Lapho i-compressor iqala, ukushisa kwe-sump kawoyela kuyacisha.
• Uxhumano: Isifudumezi se-sump kawoyela kufanele sixhunywe ngokuthintana nomsizi (noma okuxhunywana naye okunezintambo ezihambisanayo) kwe-compressor contactor kusekethe kagesi ehlukile.
• Idatha kagesi: 115 V – 1 – 60 Hz, 80 W.

Ukukhethwa nokusebenza kwama-compressor aneziguquli ze-frequency Ukusebenza okuphephile kwe-compressor, isiguquli se-frequency kumele sikwazi ukufaka ukulayisha okungaphezulu okungenani okungu-160% wezinga eliphezulu le-compressor lamanje (I-max.) okungenani imizuzwana emi-3. Uma usebenzisa ama-frequency converters, izinto ezilandelayo kufanele futhi zibhekwe:

1. Isilinganiso esiphezulu esivumelekile sokusebenza samanje se-compressor (I-max) (bona uhlobo lwepuleti noma idatha yobuchwepheshe) akumele kudlulwe.
2. Uma ukudlidliza okungavamile kwenzeka ohlelweni, ububanzi befrikhwensi ethintekile kusiguquli sefrikhwensi kufanele buvalwe ngokufanele.
3. Umkhawulo wamanje ophumayo we-converter frequency kumele ube mkhulu kunomkhawulo wamanje we-compressor (I-max).
4. Ngemuva kokuthi i-compressor ngayinye iqalile, gijima okungenani iminithi elingu-1 imvamisa okungenani engu-50 Hz.
5. Yenza yonke imiklamo kanye nokufaka ngokwemithetho yezokuphepha yendawo kanye nemithetho evamile (isb. i-VDE) nemithethonqubo kanye nokucaciswa komkhiqizi we-frequency converter

Ibanga lefrikhwensi elivumelekile lingatholakala kudatha yezobuchwepheshe.

Isivinini sokujikeleza ububanzi	0 – f-imizuzu	f-min – f-max
Isikhathi sokuqala	< 1 imizuzwana	ca. 4s
Isikhathi sokuvala	ngokushesha

f-min/f-max bheka isahluko: Idatha yobuchwepheshe: ububanzi obuvumelekile befrikhwensi

 

Ukugunyaza

Amalungiselelo okuqalisa

ULWAZI: Ukuvikela i-compressor ezimeni zokusebenza ezingamukeleki, izilawuli ze-pressostat ezicindezelayo neziphansi ziyisibopho ohlangothini lokufaka.

I-compressor iye yahlolwa efekthri futhi yonke imisebenzi ihloliwe. Ngakho-ke ayikho imiyalelo ekhethekile yokusebenzisa.

Bheka i-compressor ngokulimala kwezokuthutha!

ISEXWAYISO: Uma i-compressor ingasebenzi, kuye ngezinga lokushisa elizungezile kanye nenani lokushaja kwesiqandisi, ukucindezela kungase kukhuphuke futhi kudlule amazinga avunyelwe e-compressor. Kufanele kuthathwe izinyathelo ezifanele zokuvikela lokhu ukuthi kungenzeki (isb. ukusebenzisa umkhuhlane

Ukuhlolwa kwamandla okucindezela
I-compressor ihlolwe efektri ubuqotho bengcindezi. Uma nokho, lonke uhlelo luzovivinywa ubuqotho bengcindezi, lokhu kufanele kwenziwe yi-UL-/CSA- Standards noma izinga elihambisanayo lokuphepha ngaphandle kokufakwa kwe-compressor.

Ukuhlolwa kokuvuza

INGOZI: Ingozi yokuqhuma!

• I-compressor kufanele icindezeleke kuphela kusetshenziswa i-nitrogen (N2). Ungalokothi ucindezele umoya-mpilo noma amanye amagesi!
• Ukucindezela okuphezulu okuvunyelwe kwe-compressor akumele kudlulwe nganoma yisiphi isikhathi phakathi nenqubo yokuhlola (bheka idatha ye-nameplate)! Ungahlanganisi noma yisiphi isiqandisi ne-nitrogen ngoba lokhu kungase kubangele umkhawulo wokuthungela ukuba udlulele ebangeni elibalulekile.

Yenza ukuhlolwa kokuvuza esitshalweni esiqandisi ngezindinganiso ze-UL-/CSA noma izinga elihambisanayo lokuphepha, kuyilapho uqaphela ukucindezela okungaphezu kwamandla okuvunyelwe kwe-compressor. Amagesi okuhlola owomile kuphela angasetshenziswa ukuhlola ukuvuza, isb i-nitrogen N2 min. 4.6 (= ubumsulwa 99.996 % noma ngaphezulu).

Ukuphunyuka

ISAZISO: Ungaqali i-compressor uma ingaphansi kwe-vacuum. Ungasebenzisi noma iyiphi ivolumutage - ngisho nangezinhloso zokuhlola (kufanele zisetshenziswe kuphela ngesiqandisi). Ngaphansi kwe-vacuum, amabanga amanje we-spark-over kanye ne-creepage yamabholithi oxhumano lwebhodi letheminali ayafinyela; lokhu kungaholela ekulimaleni kwebhodi elijikayo kanye nesiphetho.

• Okokuqala, khipha uhlelo bese ufaka i-compressor ohlelweni lokuphuma. Yehlisa ingcindezi ye-compressor.
• Vula ama-valve wokuvala nomugqa wokucindezela.
• Vula isifudumezi sesump yamafutha.
• Khipha izinhlangothi zokucindezela nokukhipha usebenzisa ipompo ye-vacuum.
• Ivacuum kufanele yephulwe nge-nitrogen izikhathi eziningana phakathi kokuphuma.
• Ekupheleni kwenqubo yokukhipha, i-vacuum kufanele ibe ngu-<0.02 psig (1.5 mbar) lapho iphampu ivaliwe.
• Phinda le nqubo kaningi njengoba kudingeka.

Inkokhelo yesiqandisi

ISEXWAYISO: Gqoka izingubo zokuzivikela ezifana nezibuko kanye namagilavu ​​okuzivikela!

Qinisekisa ukuthi amavalvu okuvala umugqa wokuncela nokucindezela avuliwe.

ULWAZI: Ngokuya ngokwakhiwa kwebhodlela lokugcwalisa lesiqandisi le-CO2 (elingenalo ishubhu) i-CO2 ingagcwaliswa ngoketshezi ngemva kwesisindo noma ngegesi. Sebenzisa kuphela ikhwalithi ye-CO2 eyomisiwe kakhulu (bona isahluko 3.1)!

• Ukugcwalisa isiqandisi esiwuketshezi: Kunconywa ukuthi isistimu iqale igcwaliswe lapho imile ngegesi ohlangothini lokucindezela okuphezulu kuze kufike kungcindezi yesistimu okungenani engu-75 psig (5.2 bar) (uma igcwaliswe ngaphansi kuka-75 psig (5.2 bar) ) ngoketshezi, kunengozi yokwakheka kweqhwa elomile). Ukugcwaliswa okwengeziwe ngokohlelo.
• Ukuze kuqedwe ukuthi kungenzeka ukwakheka kweqhwa elomile lapho uhlelo lusebenza (ngesikhathi nangemva kwenqubo yokugcwalisa), indawo yokuvala yokushintshwa kokucindezela okuphansi kufanele isethelwe inani okungenani lama-75 psig (5.2 bar).

ISEXWAYISO: Ungalokothi weqe umkhawulo. izingcindezi ezivumelekile ngenkathi ishaja. Izinyathelo zokuphepha kufanele zithathwe ngesikhathi.

• Isithasiselo sesiqandisi, esingaba nesidingo ngemva kokuqala, singagcwaliswa ngendlela yomhwamuko ohlangothini lokumunca.

ISAZISO:

• Gwema ukugcwalisa umshini ngesiqandisisi!
• Ungashajeli isiqandisi esiwuketshezi ohlangothini lokumunca lwe-compressor.
• Ungahlanganisi izithasiselo namafutha kanye nesiqandisi.

Qalisa

ISEXWAYISO: Qinisekisa ukuthi womabili ama-valve okuvala avuliwe ngaphambi kokuqala i-compressor!

• Hlola ukuthi izisetshenziswa zokuphepha nokuvikela (i-pressure switch, ukuvikelwa kwemoto, izinyathelo zokuvikela ukuthintana ngogesi, njll.) zisebenza kahle yini.
• Vula i-compressor futhi uyivumele isebenze okungenani iminithi elingu-1 imvamisa okungenani engu-50 Hz. Kulapho kuphela lapho isivinini se-compressor singancishiswa.
• Umshini kufanele ufinyelele esimweni sokulingana.
• Hlola izinga likawoyela: Izinga likawoyela kufanele libonakale engilazini yokubuka.
• Ngemva kokushintshwa kwe-compressor, izinga likawoyela kufanele lihlolwe futhi. Uma izinga liphezulu kakhulu, uwoyela kufanele ukhishwe (ingozi yokuthuthumela koketshezi lwamafutha; umthamo oncishisiwe wesistimu yesiqandisi).

ISAZISO: Uma amanani amakhulu kawoyela kufanele engezwe phezulu, kunengozi yokuba nomthelela kawoyela. Uma kunjalo, hlola ukubuya kwamafutha!

Ukushintsha kwengcindezi
Amaswishi okucindezela alungiswe ngokufanelekile ngokuya nge-UL 207 / EN 378 noma izindinganiso zikazwelonke ezicisha i-compressor ngaphambi kokufinyelela ukucindezela okuphezulu okuvumelekile okusebenzayo kufanele kufakwe ohlelweni. Ukuncishiswa kwengcindezi yokushintsha kwengcindezi kungenzeka emigqeni yokudonsa kanye neyokucindezela phakathi kwevalve yokuvala kanye ne-compressor noma ekuxhumekeni okungakhiyeki kwamavalvu okuvala (ukuxhumana A no-B, bheka Isahluko 9).

Ama-valve okunciphisa ingcindezi

ISAZISO: I-compressor ifakwe ama-valve amabili okusiza ukucindezela. I-valve eyodwa ohlangothini ngalunye lokumunca kanye nokukhipha. Uma ukucindezela ngokweqile kufinyelelwa, ama-valve avuleka futhi avimbele ukwanda kwengcindezi eyengeziwe. Ngaleyo ndlela i-CO2 iqhunyiswa endaweni ezungezile! Uma i-valve yokukhulula ingcindezi isebenza ngokuphindaphindiwe, hlola i-valve bese uyishintsha uma kunesidingo njengoba kungase kuvele izimo ezimbi kakhulu lapho kushaywa umoya, okungase kubangele ukuvuza unomphela. Ngaso sonke isikhathi hlola uhlelo lokulahlekelwa kwesiqandisi ngemva kokusebenza kwevalvu yokukhulula ingcindezi! Ama-valve okusiza ukucindezela awafaki esikhundleni noma yiziphi izinguquko zokucindezela kanye nama-valve engeziwe okuphepha ohlelweni. Amaswishi okucindezela kufanele afakwe njalo ohlelweni futhi aklanywe noma alungiswe yi-EN 378-2 noma amazinga okuphepha afanelekile. Ukwehluleka ukuqaphela kungaholela ekulimaleni kwe-CO2 ephuma kumavalvu amabili okusiza ingcindezi!

Ukugwema uku-slugging

ISAZISO: I-slugging ingaholela ekulimaleni kwe-compressor futhi kubangele ukuvuza kwesiqandisi.

Ukuvimbela i-slugging:

• Isitshalo sefriji esiphelele kufanele siklanywe ngendlela efanele.
• Zonke izingxenye kufanele zilinganiselwe ngokuhambisanayo mayelana nokuphumayo (ikakhulukazi i-evaporator namavalvu okunweba).
• Ukushisa okuphezulu kwegesi emuncwa okokufaka kwe-compressor kufanele kube> 15 K (hlola ukulungiselelwa kwevalvu yokunweba).
• Mayelana nezinga lokushisa likawoyela nokushisa kwegesi yokucindezela. (Izinga lokushisa legesi elicindezelayo kufanele libe phezulu ngokwanele min. 122°F (50 °C), ngakho izinga lokushisa likawoyela ngu> 86°F (30 °C) ).
• Uhlelo kufanele lufinyelele esimweni sokulingana.
• Ikakhulukazi ezinhlelweni ezibucayi (isb. amaphuzu amaningana e-evaporator), izinyathelo ezifana nokusetshenziswa kwezicupho eziwuketshezi, amavalvu e-solenoid emgqeni owuketshezi, njll. kuyanconywa.
• Akufanele kube khona ukunyakaza kwesiqandisi ku-compressor ngenkathi isistimu imile.

Okomisa okokuhlunga
I-Gaseous CO2 ine-solubility ephansi kakhulu emanzini kunezinye iziqandisi. Emazingeni okushisa aphansi, ngakho-ke kungabangela ukuvinjwa kwama-valve nezihlungi ngenxa yeqhwa noma i-hydrate. Ngalesi sizathu, sincoma ukuthi kusetshenziswe isihlungi esinosayizi ofanele kanye nengilazi yokubona enenkomba yomswakama.

Isondlo

Ukulungiselela

ISEXWAYISO: Ngaphambi kokuqala noma yimuphi umsebenzi ku-compressor:

• Vala i-compressor futhi uyivikele ukuze uvimbele ukuqala kabusha.
• Yehlisa i-compressor yokucindezela kwesistimu.
• Vimbela umoya ekungeneni ohlelweni!

Ngemuva kokuthi ukulungiswa kwenziwe:

• Xhuma iswishi yokuphepha.
• Khipha i-compressor.
• Khipha ukhiye wokuvula.

ISEXWAYISO: Ukuwohloka kufanele kwenziwe ngendlela yokuthi kungabikho i-ice eqinile ye-CO2 ekhiqizwayo evimba i-outlet futhi ingase ivimbele ukuphuma kwe-CO2. Ngaphandle kwalokho, kunengozi yokuthi ingcindezi ingaphinde yakheke futhi.

Umsebenzi okufanele wenziwe
Ukuqinisekisa ukuthembeka okuphelele kokusebenza kanye nempilo yesevisi ye-compressor, sincoma ukwenza umsebenzi wokusevisa nokuhlola ngezikhathi ezithile:

Ukushintsha uwoyela: 

• akuphoqelekile kumasistimu ochungechunge akhiqizwa efekthri.
• ekufakweni kwenkambu noma lapho kusebenza eduze nomkhawulo wohlelo lokusebenza: okokuqala ngqa ngemva kwamahora okusebenza ayi-100 kuya kwangu-200, bese kuba cishe. njalo ngeminyaka emi-3 noma amahora ayi-10,000 - 12,000 okusebenza. Lahla uwoyela osetshenzisiwe ngokwemithethonqubo; gcina imithetho kazwelonke.

Ukuhlolwa kwaminyaka yonke:

• Ileveli kawoyela, ukucinana kokuvuza, imisindo egijimayo, izingcindezi, amazinga okushisa, umsebenzi wamathuluzi asizayo njenge-oil sump heater, i-pressure switch.

Isincomo sengxenye esele
Izingxenye ezisele ezitholakalayo kanye nezinsiza zingatholakala ethuluzini lethu lokukhetha i-compressor ngaphansi kwe-vap.bock.de kanye naku-bockshop.bock.de. Sebenzisa izingxenye ezisele ze-Bock zangempela kuphela!

Izinto zokugcoba
Ukuze usebenze nge-CO2, izinhlobo zikawoyela ezilandelayo ziyadingeka: inguqulo ye-compressor ML ne-S: BOCKlub E85

Ukuyekisa ukusebenza
Vala ama-valve wokuvala ku-compressor. I-CO2 ayidingi ukuthi igaywe kabusha ngakho-ke ingaphephuka iye endaweni ezungezile. Kubalulekile ukuqinisekisa ukungena komoya okuhle noma ukufaka i-CO2 ngaphandle ukuze ugweme ingozi yokuminyanisa. Uma ukhulula i-CO2, gwema ukwehla ngokushesha kwengcindezi ukuze uvimbele uwoyela ukuthi ungaphumi nawo. Uma i-compressor ingenawo ukucindezela, susa amapayipi ohlangothini lwe-pressure- kanye nohlangothi lokumunca (isb. ukuqaqa ivalve yokuvala, njll.) bese ukhipha isicindezela usebenzisa i-hoist efanele. Lahla uwoyela ngaphakathi ngokwemithetho kazwelonke esebenzayo.

Lapho i-compressor inqanyulwa (isb. yesevisi noma esikhundleni se-compressor) amanani amakhulu e-CO2 emafutheni angakhululwa. Uma ukuwohloka kwe-compressor kunganele ngokwanele, ama-valve avaliwe angase aholele ekucindezelekeni okungenakubekezelelwa. Ngalesi sizathu, uhlangothi lokumunca (LP) kanye nohlangothi lwe-high-pressure (HP) lwe-compressor kufanele luvikelwe ngamavalvu okucindezela.

Idatha yobuchwepheshe

1. Ukubekezelela (± 10 %) ngokuhlobene nenani elimaphakathi levolumutage ububanzi. Omunye umqulutages kanye nezinhlobo zamanje ngesicelo.
2. Imininingwane ye-max. ukusetshenziswa kwamandla kusebenza ku-60 Hz ukusebenza.
   • Cabangela ubuningi. ukusebenza kwamanje / ubuningi. ukusetshenziswa kwamandla okwakhiwa kwamafuse, imigqa yokuhlinzeka, namadivayisi okuphepha.
   • Fuse: Isigaba sokusebenzisa i-AC3
3. Yonke imininingwane isuselwa esilinganisweni se-voltagibanga
4. Isixhumi sendandatho yokusika samashubhu ensimbi
5. Okokuxhumana kwe-solder

Ubukhulu nokuxhumana

Ubukhulu nokuxhumana nama-valve avaliwe:

SV DV	Ngomugqa wokuncela bheka idatha yobuchwepheshe, isahluko 8 Umugqa wokukhipha
A	Uhlangothi lokudonsa lokuxhuma, alukhiyeki	1/8“I-NPTF
A1	Uhlangothi lokudonsa lokuxhuma, luyakhiya	7/16“UNF
B	Uhlangothi lokukhipha uxhumano, alukhiyeki	1/8“I-NPTF
B1	Uhlangothi lokukhipha lokuxhuma, luyakhiya	7/16“UNF
D1	Uwoyela wokuxhuma ubuya kusihlukanisi samafutha	1/4“I-NPTF
E	Isilinganiso somfutho kawoyela wokuxhuma	1/8“I-NPTF
F	Ukukhipha amafutha	M12x1.5
I	Ukuxhuma inzwa yezinga lokushisa legesi eshisayo	1/8“I-NPTF
J	Connection Amafutha sump heater	3/8“I-NPTF
K	Ingilazi yokubuka	1 1/8“ – 18 UNF
L	Ukuxhuma i-thermostat yokuvikela ukushisa	1/8“I-NPTF
O	Isilawuli sezinga likawoyela wokuxhuma	2 x 1 1/8“ – 18 UNef
Q	Inzwa yokushisa kawoyela yokuxhuma	1/8“I-NPTF
SI1	I-Decompression valve HP	M22x1.5
SI2	I-Decompression valve LP	M22x1.5

Isimemezelo sokufakwa
Isimemezelo sokufakwa kwemishini engaphelele yi-EC Machinery Directive 2006/42/EC, Annex II 1. B

Umkhiqizi: Bock GmbH Benzstraße 7 72636 Frickenhausen, Germany

Thina, njengomkhiqizi, simemezela ngomthwalo wemfanelo kuphela ukuthi imishini engaphelele

Igama: I-Compressor ye-semi-hermetic

• Izinhlobo: HG(X)12P/60-4 S (HC)………………………….. HG(X)88e/3235-4(S) (HC)
• UL-HGX12P/60 S 0,7…………………………… UL-HGX66e/2070 S 60
• HGX12P/60 S 0,7 LG……………………………… HGX88e/3235 (ML/S) 95 LG
• HG(X)22(P)(e)/125-4 A………………………….. HG(X)34(P)(e)/380-4 (S) A
• HGX34(P)(e)/255-2 (A)………………………….. HGX34(P)(e)/380-2 (A)(K)
• HA(X)12P/60-4………………………………………. HA(X)6/1410-4
• HAX22e/125 LT 2 LG………………………………… HAX44e/665 LT 14 LG
• I-HGX12e/20-4 (ML/S) CO2 (LT) ……….. HGX44e/565-4 S CO2
• UL-HGX12e/20 (S/ML) 0,7 CO2 (LT)… UL-HGX44e/565 S 31 CO2
  HGX12/20-4 (ML/S/SH) CO2T………………………………………………………………… HGX46/440-4 (ML/S/SH) CO2 T
• UL-HGX12/20 ML(P) 2 CO2T……………… UL-HGX46/440 ML(P) 53 CO2T
• HGZ(X)7/1620-4……………………………………. HGZ(X)7/2110-4
• HGZ(X)66e/1340 LT 22………………………….. HGZ(X)66e/2070 LT 35
• I-HRX40-2 CO2 TH…………………………………….. HRX60-2 CO2 TH

Igama:Vula uhlobo lwe-compressor

• Izinhlobo: F(X)2……………………………………………. F(X)88/3235 (NH3)
• I-FK(X)1……………………………………………. I-FK(X)3
• I-FK(X)20/120 (K/N/TK)………………… FK(X)50/980 (K/N/TK)

Inombolo yomkhiqizo:
BC00000A001 - BN99999Z999 ithobelana nezinhlinzeko ezilandelayo zalokhu okubalulwe ngenhla

Umyalelo:
Ngokusho kwe-Annex I, amaphuzu 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.5.1, 1.5.2, 1.5.13 kanye no-1.7.1 kuya ku-1.7.4 ( ngaphandle kokuthi 1.7.4 f) ziyagcwaliseka.

Kusetshenziswe izindinganiso ezivumelanisiwe, ikakhulukazi:
I-TS EN ISO 12100: 2010 Ukuphepha kwemishini - Izimiso ezijwayelekile zokuklama - Ukuhlolwa kobungozi kanye nokunciphisa ubungozi TS EN 12693:2008 Amasistimu wokuqandisa namaphampu okushisa - Izidingo zokuphepha nezemvelo - Ama-compressor esiqandisi ahamba phambili

Amazwana:
Siphinde simemezele ukuthi amadokhumenti obuchwepheshe akhethekile alo mshini ongaphelele adalwe yi-Annex VII, Ingxenye B futhi sinesibopho sokuhlinzeka ngalokhu ngesicelo esinengqondo esivela kuziphathimandla zikazwelonke ngokudluliswa kwedatha. Ukusetshenziswa akuvunyelwe kuze kube sekuqinisekisiwe ukuthi umshini lapho umshini ongaphelele ozofakwa kuwo uthobelana ne-EC Machinery Directive kanye ne-EC Declaration of Conformity, Annex II. 1. U-A ukhona.

Umuntu ogunyaziwe wokuhlanganisa nokunikeza imibhalo yobuchwepheshe: Bock GmbH Alexander Layh Benzstraße 7 72636 Frickenhausen, i. A. Alexander Layh, Inhloko Yomhlaba Wonke Ye-R&D

Germany Frickenhausen, 04th January 2021

Isimemezelo sokufakwa
Isimemezelo sokufakwa kwemishini engaphelele yi-EC Machinery Directive 2006/42/EC, Annex II 1. B

Umkhiqizi: Bock GmbH Benzstraße 7 72636 Frickenhausen, Germany

Thina, njengomkhiqizi, simemezela ngomthwalo wemfanelo kuphela ukuthi imishini engaphelele

Igama: I-Compressor ye-semi-hermetic

• Izinhlobo: HG(X)12P/60-4 S (HC)………………………….. HG(X)88e/3235-4(S) (HC)
• UL-HGX12P/60 S 0,7…………………………… UL-HGX66e/2070 S 60
• HGX12P/60 S 0,7 LG……………………………… HGX88e/3235 (ML/S) 95 LG
• HG(X)22(P)(e)/125-4 A………………………….. HG(X)34(P)(e)/380-4 (S) A
• HGX34(P)(e)/255-2 (A)………………………….. HGX34(P)(e)/380-2 (A)(K)
• HA(X)12P/60-4………………………………………. HA(X)6/1410-4
• HAX22e/125 LT 2 LG………………………………… HAX44e/665 LT 14 LG
• I-HGX12e/20-4 (ML/S) CO2 (LT) ……….. HGX44e/565-4 S CO2
• UL-HGX12e/20 (S/ML) 0,7 CO2 (LT)… UL-HGX44e/565 S 31 CO2
  HGX12/20-4 (ML/S/SH) CO2T………………………………………………………………… HGX46/440-4 (ML/S/SH) CO2 T
• UL-HGX12/20 ML(P) 2 CO2T……………… UL-HGX46/440 ML(P) 53 CO2T
• HGZ(X)7/1620-4……………………………………. HGZ(X)7/2110-4
• HGZ(X)66e/1340 LT 22………………………….. HGZ(X)66e/2070 LT 35
• I-HRX40-2 CO2 TH…………………………………….. HRX60-2 CO2 TH

Igama:Vula uhlobo lwe-compressor

• Izinhlobo: F(X)2……………………………………………. F(X)88/3235 (NH3)
• I-FK(X)1……………………………………………. I-FK(X)3
• I-FK(X)20/120 (K/N/TK)………………… FK(X)50/980 (K/N/TK)

Inombolo yomkhiqizo: BC00000A001 - BN99999Z999 ithobelana nezinhlinzeko ezilandelayo zalokhu okubalulwe ngenhla

Ithuluzi elisemthethweni:
NgokukaSheduli 2, ingxenye1, amaphuzu 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.5.1, 1.5.2, 1.5.13 kanye no-1.7.1 kuya ku-1.7.4. 1.7.4 (ngaphandle kuka-XNUMX f) ziyagcwaliseka.

Amazwana: Siphinde simemezele ukuthi amadokhumenti obuchwepheshe akhethekile alo mshini oqedwe ingxenye akhiwe yi-Annex II, 1. B futhi sinesibopho sokuhlinzeka ngalokhu ngesicelo esinengqondo esivela kuziphathimandla zikazwelonke ngokudluliswa kwedatha. Ukusetshenziswa akuvunyelwe kuze kube yilapho sekuqinisekisiwe ukuthi umshini lapho umshini oqedwe ingxenye engenhla uzofakwa uthobelana ne-UK Statutory Instrument Supply Machinery (Safety) Regulations 2008 kanye Nesimemezelo Se-EC Sokuvumelana, Isijobelelo II, 1. A sikhona.

Umuntu ogunyaziwe ukuze ahlanganise futhi anikeze imibhalo yobuchwepheshe:

Bock GmbH Alexander Layh Benzstraße 7 72636 Frickenhausen, Germany i. A. Alexander Layh, Inhloko Yomhlaba Wonke Ye-R&D

Frickenhausen, 14th ka-Okthoba 2022

UL-Isitifiketi Sokuthobelana

khasimende elithandekayo, Isitifiketi Sokuthobelana singalandwa ngekhodi ye-QR elandelayo:

https://vap.bock.de/stationaryapplication/Data/DocumentationFiles/COCCO2trans.pdf

Amadokhumenti / Izinsiza

I-Danfoss UL-HGX12e CO2 LT Reciprocating Compressor [pdf] Umhlahlandlela Womsebenzisi I-UL-HGX12e CO2 LT I-Compressor Reciprocating, UL-HGX12e CO2 LT, I-Compressor Reciprocating, Compressor

Izithenjwa

• Imaniwali yosebenzisayo