I-Danfoss AS-CX06 Isilawuli Esihlelekayo
Imininingwane
- Imodeli: Isilawuli esihlelekayo Uhlobo lwe-AS-CX06
- Ubukhulu: 105mm x 44.5mm x 128mm (Ngaphandle kwesibonisi se-LCD)
- Ubukhulu. Izinombolo RS485: Kufika ku-100
- Ubukhulu. I-Baudrate RS485: 125 kbit/s
- Ubukhulu. Ama-Nodes CAN FD: Kufika ku-100
- Ubukhulu. I-Baudrate CAN FD: 1 Mbit/s
- Ubude Bentambo RS485: Kufika ku-1000m
- Ubude bezintambo ZE-CAN FD: Kufika ku-1000m
Imiyalo yokusetshenziswa komkhiqizo
Ukuxhumana Kwesistimu
Isilawuli se-AS-CX06 singaxhunywa kumasistimu namadivayisi ahlukahlukene, okuhlanganisa:
- I-RS485 ukuya ku-BMS (BACnet, Modbus)
- I-USB-C yokuxhumeka kwe-Stepper Driver eyakhelwe ngaphakathi
- Ukuxhumeka kwe-PC nge-Pen drive
- Uxhumo oluqondile lwamafu
- Ibhasi langaphakathi eliya ekwandiseni kwe-I/O
- Izimbobo ze-Ethernet zamaphrothokholi ahlukahlukene kufaka phakathi Web, BACnet, Modbus, MQTT, SNMP, njll.
- Ukuxhumeka kuzilawuli ezengeziwe ze-AS-CX noma i-Alsmart remote HMI
I-RS485 kanye ne-CAN FD Communication
Izimbobo ze-RS485 kanye ne-CAN FD zisetshenziselwa ukuxhumana nezinhlelo ze-fieldbus, i-BMS, namanye amadivayisi. Imininingwane ebalulekile ihlanganisa:
- I-topology yamabhasi i-RS485 kufanele ibe nokunqanyulwa komugqa nezinqamuleli zangaphandle eziyi-120 Ohm kuzo zombili iziphetho endaweni ephazamisekile.
- Ubukhulu. inombolo yama-node we-RS485: Kufika ku-100
- Ukuxhumana kwe-CAN FD kusetshenziselwa ukuxhumana kwedivayisi nedivayisi okunezidingo ze-topology ezifanayo njenge-RS485.
- Ubukhulu. inani lamanodi e-CAN FD: Kufika ku-100
Amabhodi Okokufaka nokuphumayo
I-AS-CX06 ifaka amabhodi aphezulu naphansi okokufaka nokuphumayo okuhlukahlukene okuhlanganisa amasiginali e-analog nedijithali, uxhumo lwe-Ethernet, okokufaka kwemojula yokulondoloza ibhethri, nokunye.
Ukuhlonza
| I-AS-CX06 Lite | 080G6008 |
| I-AS-CX06 Mid | 080G6006 |
| AS-CX06 Mid+ | 080G6004 |
| I-AS-CX06 Pro | 080G6002 |
| I-AS-CX06 Pro+ | 080G6000 |
Ubukhulu
Ngaphandle kwesibonisi se-LCD
Ngokubonisa kwe-Snap-on LCD: 080G6016
Ukuxhumana
Ukuxhumeka kwesistimu
Ibhodi Eliphezulu
Ibhodi Elingezansi
okokufaka kwamamojula asekela ibhethri ukuze kuvikelwe ukuvaleka kwamavalvu e-electronic stepper (isb. EKE 2U)
- Itholakala kuphela ku-: Mid+, Pro+
- Itholakala kuphela ku-: Mid, Mid+, Pro, Pro+
- I-SSR
isetshenziswa endaweni ye-SPST edluliselwe ku-Mid+
Ukuxhumana kwedatha
I-Ethernet (yezinguqulo ze-Pro ne-Pro+ kuphela)
Khomba i-topology yenkanyezi enamahabhu/amaswishi enethiwekhi. Idivayisi ngayinye ye-AS-CX ihlanganisa iswishi enobuchwepheshe obungaphumeleli.
- Uhlobo lwe-Ethernet: 10/100TX auto MDI-X
- Uhlobo lwekhebula: Ikhebula le-CAT5, 100 m max.
- Isixhumanisi sohlobo lwekhebulangi :r45
Ulwazi lokufinyelela lokuqala
Idivayisi ithola ngokuzenzakalelayo ikheli layo le-IP kunethiwekhi nge-DHCP.
Ukuze uhlole ikheli le-IP lamanje, cindezela ENTER 
ukuze ufinyelele imenyu yezilungiselelo ezizenzakalelayo bese ukhetha Izilungiselelo ze-Ethernet.
Faka ikheli le-IP kokuncamelayo web isiphequluli ukuze ufinyelele i web phambili. Uzoqondiswa esikrinini sokungena ngemininingwane elandelayo ezenzakalelayo:
- Umsebenzisi Ozenzakalelayo: Admin
- Iphasiwedi ezenzakalelayo: Umlawuli
- Iphasiwedi Yenombolo Ezenzakalelayo: 12345 (ezosetshenziswa esikrinini se-LCD) Uzocelwa ukuthi ushintshe iphasiwedi yakho ngemva kokungena kwakho kokuqala ngempumelelo.
Qaphela: ayikho indlela yokubuyisa iphasiwedi ekhohliwe.
RS485: Modbus, BACnet
Izimbobo ze-RS485 zihlukanisiwe futhi zingahlelwa njengeklayenti noma iseva. Zisetshenziselwa ukuxhumana kwe-fieldbus kanye ne-BMS.
I-topology yebhasi
Izincomo zohlobo lwekhebula:
- Ukubhanqa okusontekile nomhlabathi: imikhondo emifushane (okungukuthi <10 m), azikho izintambo zamandla eziseduze (min. 10 cm).
- Ipheya elisontiwe + umhlabathi nesihlangu: imikhondo emide (okungukuthi > 10 m), i-EMC- indawo ephazamisekile.
Ubuningi.. inani lamanodi: kufika ku-100
| Ubude bentambo (m) | Ubukhulu. isilinganiso se-baud | Okuncane. usayizi wentambo |
| 1000 | 125 kbit/s | 0.33 mm2 – 22 AWG |
INGABE FD
Ukuxhumana kwe-CAN FD kusetshenziselwa ukuxhumana kwedivayisi nedivayisi. Iphinde isetshenziselwe ukuxhuma i-Alsmart ekude ye-HMI ngembobo yokubonisa.
I-topology yebhasi
Uhlobo lwekhebula:
- Ukubhanqa okusontekile nomhlabathi: imikhondo emifushane (okungukuthi <10 m), azikho izintambo zamandla eziseduze (min. 10 cm).
- Ipheya elisontiwe + umhlabathi nesihlangu: imikhondo emide (okungukuthi > 10 m), i-EMC ephazamisekile endaweni
Ubuningi.. inani lamanodi: kuze kufike ku-100
| Ubude bentambo (m) 1000 | Ubukhulu. baudrate CAN | Okuncane. usayizi wentambo |
| 1000 | 50 kbit/s | 0.83 mm2 – 18 AWG |
| 500 | 125 kbit/s | 0.33 mm2 – 22 AWG |
| 250 | 250 kbit/s | 0.21 mm2 – 24 AWG |
| 80 | 500 kbit/s | 0.13 mm2 – 26 AWG |
| 30 | 1 Mbit/s | 0.13 mm2 – 26 AWG |
Ukufakwa kwe-RS485 kanye ne-CAN FD
- Womabili ama-fieldbuses ayizinhlobo ezimbili ezihlukene zezintambo, futhi kubalulekile ekuxhumaneni okuthembekile ukuxhuma wonke amayunithi kunethiwekhi nangocingo oluphansi.
Sebenzisa ipheya eyodwa yezintambo ezisontekile ukuze uxhume amasignali ahlukene futhi usebenzise enye intambo (isibample pair yesibili esontekile) yokuxhuma umhlabathi. Okwesiboneloample:
- Ukunqanyulwa kolayini kufanele kube khona kuzo zombili iziphetho zamabhasi ukuze kuqinisekiswe ukuxhumana okufanele.
Ukunqanyulwa komugqa kungafakwa ngezindlela ezimbili ezihlukene:- Yenza isekethe emfushane kumatheminali e-CAN-FD H kanye no-R (ku-CANbus kuphela);
- Xhuma i-resistor engu-120 Ω phakathi kwamatheminali e-CAN-FD H kanye ne-L ye-CANbus noma i-A+ ne-B- ye-RS485.
- Ukufakwa kwekhebula lokuxhumana kwedatha kufanele kwenziwe ngendlela efanele nebanga elanele ukuya kuvolthi ephezulutagizintambo.
- Amadivayisi kufanele axhunywe ngokuya nge-topology "yeBHASI". Lokho kusho ukuthi intambo yokuxhumana ixhunywe kudivayisi eyodwa iye kwelandelayo ngaphandle kwama-stubs.
Uma ama-stubs ekhona kunethiwekhi, kufanele agcinwe emfushane ngangokunokwenzeka (<0.3 m ku-1 Mbit; <3 m ku-50 kbit). Qaphela ukuthi i-HMI ekude exhunywe embobeni yokubonisa yenza i-stub.
- Kumelwe kube nokuxhumana okuhlanzekile (okungaphazanyiswa) komhlabathi phakathi kwawo wonke amadivayisi axhunywe kunethiwekhi. Amayunithi kufanele abe nomhlabathi ontantayo (ongaxhunywanga emhlabeni), oboshwe ndawonye phakathi kwawo wonke amayunithi ngocingo oluphansi.
- Uma kunekhebula lamakhondatha amathathu kanye nesihlangu, isihlangu kufanele simiswe endaweni eyodwa kuphela.
Ulwazi lwe-pressure transmitter
Example: I-DST P110 enokukhishwa kwesilinganiso-metric
Ulwazi lwe-ETS Stepper Valve
Uxhumo lwekhebula levalvu
Ubude bekhebula obukhulu: 30 m
I-CCM / CCMT / CTR / ETS Colibri® / KVS Colibri® / ETS / KVS
| Ikhebula le-Danfoss M12 | Emhlophe | Mnyama | Okubomvu | Okuhlaza |
| Izikhonkwane ze-CCM/ETS/KVS | 3 | 4 | 1 | 2 |
| Izikhonkwane ze-CCMT/CTR/ETS Colibri/KVS Colibri | A1 | A2 | B1 | B2 |
| Amatheminali e-AS-CX | A1 | A2 | B1 | B2 |
ETS 6
| Umbala wentambo | iwolintshi | Okuphuzi | Okubomvu | Mnyama | Okumpunga |
| Amatheminali e-AS-CX | A1 | A2 | B1 | B2 | Ayixhunyiwe |
Ulwazi lwe-AKV (yenguqulo ye-Mid+ kuphela)
Idatha yobuchwepheshe
Imininingwane kagesi
| Idatha kagesi | Inani |
| Ukunikezwa kwevoltage AC/DC [V] | 24V AC/DC, 50/60 Hz (1)(2) |
| Ukunikezwa kwamandla [W] | 22 W @ 24 V AC, imiz. 60 VA uma i-transformer isetshenziswa noma 30 W DC amandla kagesi(3) |
| Ubukhulu bekhebula likagesi [mm2] | 0.2 – 2.5 mm2 kwezixhumi zephitshi ezingu-5 mm 0.14 – 1.5 mm2 kuzixhumi zephitshi ezingu-3.5 mm |
- 477 5×20 Series from LittelFuse (0477 3.15 MXP).
- Inani eliphakeme kakhulu lama-DCtagi-e ingasetshenziswa uma isilawuli sifakiwe kuhlelo lokusebenza lapho umenzi ememezela izinga lereferensi kanye nomthamotagIleveli yamasekhethi e-SELV/PELV afinyelelekayo azothathwa njengengeyona ingozi ngokwezinga lesicelo. Lowo mqulutagIzinga le-e lingasetshenziswa njengokufakwa kukagesi nakuba i-60 V DC akumele yeqiwe.
- E-US: Ikilasi 2 <100 VA (3)
- Esimeni esifushane sesekethe ugesi we-DC kufanele ukwazi ukuhlinzeka ngo-6 A ngamasekhondi angu-5 noma amandla aphumayo aphakathi kuka-15 W.
Izicaciso zokokufaka/okukhiphayo
- Ubude bekhebula obukhulu: 30m
- Okokufaka kwe-analogi: I-AI1, AI2, AI3, AI4, AI5, AI6, AI7, AI8, AI9, AI10
| Uhlobo | Isici | Idatha |
| 0/4-20 mA | Ukunemba | ± 0.5% FS |
| Isixazululo | 1 Ine | |
| 0/5 V I-Radiometric | Ihlobene nokunikezwa kwangaphakathi kwe-5 V DC (10 - 90 %) | |
| Ukunemba | ±0.4% FS | |
| Isixazululo | 1 mV | |
| 0 - 1 V 0 - 5 V 0 - 10 V |
Ukunemba | ±0.5% FS (FS ihloselwe ngokukhethekile uhlobo ngalunye) |
| Isixazululo | 1 mV | |
| Ukumelana nokokufaka | > 100 kOhm | |
| I-PT1000 | Meas. ububanzi | -60 kuya ku-180 ° C |
| Ukunemba | ±0.7 K [-20…+60 °C ], ±1 K uma kungenjalo | |
| Isixazululo | 0.1 K | |
| I-PTC1000 | Meas. ububanzi | -60…+80 °C |
| Ukunemba | ±0.7 K [-20…+60 °C ], ±1 K uma kungenjalo | |
| Isixazululo | 0.1 K | |
| I-NTC10k | Meas. ububanzi | -50 kuya ku-200 ° C |
| Ukunemba | ± 1 K [-30…+200 °C] | |
| Isixazululo | 0.1 K | |
| I-NTC5k | Meas. ububanzi | -50 kuya ku-150 ° C |
| Ukunemba | ± 1 K [-35…+150 °C] | |
| Isixazululo | 0.1 K | |
| Okokufaka kwedijithali | Ukukhuthazwa | Voltagukuxhumana kwe-e-free |
| Ukuhlanza othintana naye | 20 mA | |
| Esinye isici | Umsebenzi wokubala we-Pulse 150 ms isikhathi sokuphika |
Okokufaka kwedijithali: DI1, DI2
| Uhlobo | Isici | Idatha |
| Voltage mahhala | Ukukhuthazwa | Voltagukuxhumana kwe-e-free |
| Ukuhlanza othintana naye | 20 mA | |
| Esinye isici | Umsebenzi wokubala ishayela ubuningi. 2 kHz |
Okukhiphayo kwe-Analog: AO1, AO2, AO3
| Uhlobo | Isici | Idatha |
| Ubukhulu. umthwalo | 15 mA | |
| 0 - 10 V | Ukunemba | Umthombo: 0.5% FS |
| Sink 0.5% FS ye-Vout > 0.5 V 2% FS lonke uhla (I<=1mA) | ||
| Isixazululo | 0.1% FS | |
| I-Async PWM | Voltage okukhiphayo | I-Vout_Lo Max = 0.5 V Vout_Hi Min = 9 V |
| Ibanga lemvamisa | 15 Hz - 2 kHz | |
| Ukunemba | 1% FS | |
| Isixazululo | 0.1% FS | |
| Vumelanisa i-PWM/PPM | Voltage okukhiphayo | I-Vout_Lo Max = 0.4 V Vout_Hi Min = 9 V |
| Imvamisa | Imvamisa ye-Mains x 2 | |
| Isixazululo | 0.1% FS |
Okukhiphayo kwedijithali
| Uhlobo | Idatha |
| DO1, DO2, DO3, DO4, DO5 | |
| I-Relay | I-SPST 3 A Nominal, 250 V AC 10k imijikelezo yemithwalo eqinile UL: FLA 2 A, LRA 12 A |
| I-DO5 ye-Mid+ | |
| Ukudluliselwa Okuqinile Kwezwe | I-SPST 230 V AC / 110 V AC /24 V AC max 0.5 A |
| DO6 | |
| I-Relay | I-SPDT 3 A Nominal, 250 V AC 10k imijikelezo yemithwalo eqinile |
| Ukuzihlukanisa phakathi kokudluliselana eqenjini le-DO1-DO5 kuyasebenza. Ukuhlukaniswa phakathi kweqembu le-DO1-DO5 ne-DO6 kuyaqiniswa. | |
| I-Stepper motor output (A1, A2, B1, B2) | |
| I-Bipolar / Unipolar | Ama-valve e-Danfoss: • ETS / KVS / ETS C / KVS C / CCMT 2–CCMT 42 / CTR • ETS6 / CCMT 0 / CCMT 1 Amanye amavalvu: • Isivinini 10 – 300 pps • Isinyathelo esigcwele semodi yeDrayivu – 1/32 microstep • Ubukhulu. izinga eliphezulu lamanje: 1 A • Amandla okukhiphayo: 10 W ukuphakama, 5 W isilinganiso |
| Isipele sebhethri | Ibhethri le-V: 18 – 24 V DC(1), ubuningi. amandla 11 W, imiz. umthamo 0.1 Wh |
Okukhipha amandla e-Aux
| Uhlobo | Isici | Idatha |
| +5 V | +5 V DC | Ukunikezwa kwezinzwa: 5 V DC / 80 mA |
| +15 V | +15 V DC | Ukunikezwa kwezinzwa: 15 V DC / 120 mA |
Idatha yomsebenzi
| Idatha yomsebenzi | Inani |
| Bonisa | I-LCD 128 x 64 pixel (080G6016) |
| I-LED | Okuhlaza, Okuwolintshi, I-LED Ebomvu elawulwa uhlelo lokusebenza lwesofthiwe. |
| Ukuxhumeka kwesibonisi sangaphandle | RJ12 |
| Ukuxhumana kwedatha eyakhelwe ngaphakathi | MODBUS, BACnet ye-fieldbus nokuxhumana nezinhlelo ze-BMS. I-SMNP yokuxhumana nezinhlelo ze-BMS. I-HTTP(S), MQTT(S) yokuxhumana ukuze web iziphequluli namafu. |
| Ukunemba kwewashi | +/- 15 ppm @ 25 °C, 60 ppm @ (-20 kuya +85 °C) |
| Amandla okulondoloza ibhethri lewashi | Izinsuku ezi-3 ku-25 °C |
| I-USB-C | Inguqulo ye-USB engu-1.1/2.0 isivinini esikhulu, i-DRP nokusekelwa kwe-DRD. Ubukhulu. yamanje 150 mA Ukuze uxhumeke ipeni drive kanye laptop (bheka User Guide). |
| Ukukhweza | Isitimela se-DIN, indawo eqondile |
| Izindlu zepulasitiki | Ukuzicisha ngokwakho i-V0 nokuhlolwa kwentambo ecwebezelayo/eshisayo ku-960 °C. Ukuhlolwa kwebhola: 125 °C Ukuvuza kwamanje: ≥ 250 V ngokusho kwe-IEC 60112 |
| Uhlobo lokulawula | Izohlanganiswa ezintweni zikagesi zeClass I kanye/noma II |
| Uhlobo lwesenzo | 1C; 1Y yenguqulo ene-SSR |
| Isikhathi sokucindezelwa kukagesi kuyo yonke i-insulating | Yinde |
| Ukungcola | Ifanele ukusetshenziswa ezindaweni ezinezinga lokungcola 2 |
| Ukuzivikela ngokumelene ne-voltagukwenyuka | Isigaba II |
| Isigaba sesofthiwe nesakhiwo | isigaba A |
Isimo semvelo
| Isimo semvelo | Inani |
| Ibanga lokushisa le-ambient, lisebenza [°C] | -40 kuya ku-+70 °C ngezinguqulo ze-Lite, Mid, Pro. -40 kuya ku-+70 °C ku-Mid+, izinguqulo ze-Pro+ ngaphandle kokunwetshwa kwe-I/O okunamathiselwe. -40 kuya +65 °C uma kungenjalo. |
| Ibanga lokushisa le-ambient, ezokuthutha [°C] | -40 kuya +80 °C |
| I-IP yesilinganiso se-Enclosure | IP20 IP40 ngaphambili uma ipuleti noma isibonisi sifakwe |
| Ibanga lomswakamo elihlobene [%] | 5 – 90%, ayifinyeleli |
| Ubukhulu. ukuphakama kokufakwa | 2000 m |
Umsindo kagesi
Amakhebuli wezinzwa, ivolumu ephansitagOkokufaka kwe-DI kanye nokuxhumana kwedatha kufanele kugcinwe kuhlukene kwezinye izintambo zikagesi:
- Sebenzisa amathreyi ekhebula ahlukene
- Gcina ibanga phakathi kwezintambo okungenani libe ngu-10 cm
- Gcina izintambo ze-I/O zifushane ngangokunokwenzeka
Ukucatshangelwa kokufakwa
- Isilawuli kufanele sifakwe, sinikezwe isevisi futhi sihlolwe kuphela izisebenzi eziqeqeshiwe futhi ngokuhambisana nemithetho kazwelonke neyendawo.
- Ngaphambi kokusevisa okokusebenza, isilawuli kufanele sinqanyulwe kumapayipi kagesi ngokususa iswishi eyinhloko yesistimu ukuthi IVALI.
- Ukusebenzisa umthamo wokunikezelatagngaphandle kwalokho okushiwo kungalimaza kakhulu uhlelo.
- Konke ukuphepha kwevolumu ephansi eyengeziwetagizixhumanisi ze-e (okufakwayo kwe-analogue nedijithali, okuphumayo kwe-analogue, uxhumo lwamabhasi ochungechunge, izinsiza zikagesi) kufanele zibe nokwaleka okulungile okuvela kumapayipi kagesi.
- Gwema ukuthinta noma ukucishe uthinte izingxenye ze-elekthronikhi ezifakwe emabhodini ukuze ugweme ukukhishwa kwe-electrostatic kusuka kusisebenzisi kuya ezingxenyeni, okungase kubangele umonakalo omkhulu.
- Ungacindezeli i-screwdriver kuzixhumi ngamandla amakhulu, ukugwema ukulimaza isilawuli.
- Ukuze uqinisekise ukupholisa kwe-convection okwanele sincoma ukuthi ungavimbeli ukuvuleka komoya.
- Ukulimala kwengozi, ukufakwa okungekuhle, noma izimo zesayithi zingadala ukungasebenzi kahle kwesistimu yokulawula, futhi ekugcineni kuholele ekuwohlokeni kwesitshalo.
- Konke ukuvikela okungenzeka kufakwe emikhiqizweni yethu ukuvimbela lokhu. Nokho, ukufaka okungalungile kusengaletha izinkinga. Izilawuli ze-elekthronikhi azithatheli indawo yomkhuba ojwayelekile, omuhle wobunjiniyela.
- Ngesikhathi sokufakwa, qiniseka ukuthi kwenziwa indlela efanele yokuvimbela ucingo ukuba luxege futhi udale ingozi engaba khona maqondana nokushaqeka noma umlilo.
- I-Danfoss ngeke ibe nesibopho sanoma yiziphi izimpahla, noma izingxenye zezitshalo, ezilimele ngenxa yalezi zinkinga ezingenhla. Kuyisibopho somfaki ukuhlola ukufakwa kahle futhi alingane namadivayisi okuphepha adingekayo.
- I-ejenti yangakini yakwa-Danfoss izokujabulela ukukusiza ngezinye izeluleko.
Izitifiketi, izimemezelo, nezimvume (kuyaqhubeka)
| Maka(4) | Izwe |
| CE | EU |
| I-CUlus (ye-AS-PS20 kuphela) | I-NAM (US naseCanada) |
| i-cRus | I-NAM (US naseCanada) |
| I-RCM | Australia/New Zealand |
| I-EAC | Armenia, Kyrgyzstan, Kazakhstan |
| UA | I-Ukraine |
Uhlu luqukethe ukugunyazwa okuyinhloko okungaba khona kwalolu hlobo lomkhiqizo. Inombolo yekhodi ngayinye ingase ibe nokunye noma konke lokhu kugunyazwa, futhi ukugunyazwa okuthile kwasendaweni kungase kungaveli ohlwini.
Okunye ukugunyaza kungenzeka kusaqhubeka kanti okunye kungashintsha ngokuhamba kwesikhathi. Ungahlola isimo samanje kakhulu kuzixhumanisi eziboniswe ngezansi.
Isimemezelo se-EU sokuvumelana singatholakala kukhodi ye-QR.
Ulwazi olumayelana nokusetshenziswa kweziqandisi ezivuthayo nokunye kungatholakala kokuthi Isimemezelo Somkhiqizi kukhodi ye-QR.
Ulwazi mayelana nokusetshenziswa kweziqandisi ezivuthayo nokunye kungatholakala kokuthi Isimemezelo Somkhiqizi kukhodi ye-QR.
I-DanfossA/S
Izixazululo Zesimo Sezulu • danfoss.com • +45 7488 2222
Noma yimiphi imininingwane, okuhlanganisa, kodwa engagcini nje ngolwazi lokukhethwa komkhiqizo, ukusetshenziswa kwawo noma ukusetshenziswa kwawo, ukwakheka komkhiqizo, isisindo, ubukhulu, umthamo nanoma iyiphi enye idatha yobuchwepheshe kumamanuwali omkhiqizo, izincazelo zamakhathalogi, izikhangiso, njll. nokuthi ingabe yenziwe yatholakala ngokubhala , ngomlomo, nge-elekthronikhi, kulayini noma ngokudawuniloda, kuzobhekwa njengokufundisa, futhi kuyabophezela kuphela uma futhi ngokwezinga, ireferensi ecacile yenziwa kwikhotheshini noma ekuqinisekisweni kwe-oda. U-Danfoss akakwazi ukwamukela noma imuphi umthwalo wemfanelo wamaphutha angaba khona kumakhathalogi, izincwajana, amavidiyo nokunye okubalulekile. I-Danfoss igodla ilungelo lokushintsha imikhiqizo yayo ngaphandle kwesaziso. Lokhu kusebenza futhi emikhiqizweni e-odwe kodwa hhayi
ilethwe inqobo nje uma izinguquko ezinjalo zingenziwa ngaphandle koshintsho ekwakhekeni, kwawo noma ukusebenza komkhiqizo.
Zonke izimpawu zokuthengisa ezikulolu lwazi ziyimpahla yezinkampani ze-Danfoss A/5 noma zeqembu le-Danfoss. I-Danfoss nelogo ye-Danfoss yizimpawu zokuthengisa ze-Danfoss A/5. Wonke Amalungelo Agodliwe.
FAQ
Q: Ngingafinyelela kanjani ku- web Ngaphambilini kwe-AS-CX06?
A: Faka ikheli le-IP kokuncamelayo web isiphequluli. Ukuqinisekisa okuzenzakalelayo yilezi: Umsebenzisi Ozenzakalelayo: Umlawuli, Iphasiwedi Emisiwe: Umlawuli, Iphasiwedi Ezenzakalelayo Yezinombolo: 12345 (yesikrini se-LCD).
Q: Yibuphi ubude bentambo obukhulu obusekelwa uxhumo lwe-RS485 kanye ne-CAN FD?
A: Uxhumo lwe-RS485 kanye ne-CAN FD lusekela ubude bezintambo ezifika ku-1000m.
Q: Ingabe isilawuli se-AS-CX06 singaxhunywa kuzilawuli eziningi ze-AS-CX noma kumadivayisi angaphandle?
A: Yebo, isilawuli se-AS-CX06 sisekela ukuxhumeka kuzilawuli eziningi ze-AS-CX, izinzwa zangaphandle, izinhlelo ze-fieldbus, nokuningi.
Amadokhumenti / Izinsiza
 |
I-Danfoss AS-CX06 Isilawuli Esihlelekayo [pdf] Umhlahlandlela wokufaka AS-CX06 Lite, AS-CX06 Mid, AS-CX06 Mid, AS-CX06 Pro, AS-CX06 Pro, AS-CX06 Programmable Controller, AS-CX06, Programmable Controller, Controller |