I-Danfoss AK-CC 550B Case Controller
Imininingwane:
- Imodeli: AK-CC 550B
- Ukunikezwa kwamandla: 230 V ac, 50/60 Hz
Imiyalo yokusetshenziswa komkhiqizo
Ukuxhumana Okwengeziwe:
- I-RS485 (itheminali 51, 52, 53)
- I-RJ45 (yokuxhumana ngedatha)
- Izinzwa: S2, S6, S3, S4, S5
- MODBUS (yokuxhumana ngedatha)
Imihlahlandlela yokusebenzisa:
Qinisekisa ukuthi konke ukuxhumana kuthobelana nezidingo zezintambo zokuxhumana ngedatha. Bheka izincwadi: RC8AC ukuze uthole ulwazi olwengeziwe.
Ukunikezwa kwamandla kagesi:
Qinisekisa umthamo wokunikezelatagi-e ingu-230 V ac, 50/60 Hz.
DO1 Uxhumano:
Xhuma i-valve yokwandisa uhlobo lwe-AKV noma i-AKVA. Ikhoyili kufanele ibe yikhoyili engu-230 V ac.
I-DO2 Alarm Connection:
Ezimeni ze-alamu nalapho isilawuli singenawo amandla, xhuma itheminali engu-7 no-8.
Ukuhlonza
Ubukhulu
Isimiso
I-S2:
Inzwa ye-Insulate
Ulwazi lwe-AKV!!
I-AK-CC 550B
| Ulwazi Olwengeziwe: | Ibhukwana lesiNgisi | I-RS8GL... | www.evaXNUMXo.com |
Isilawuli sinikezwe izimpawu ezivela efekthri ezibonisa uhlelo lokusebenza 1.
Uma usebenzisa okunye ukusetshenziswa, izimpawu zinikezwa ukuze ukwazi ukukhweza ezifanele.
Ukuxhumana kwedatha
Okubalulekile Konke ukuxhumeka ekuxhumaneni kwedatha MODBUS, DANBUSS kanye ne-RS 485 kufanele kuhambisane nezidingo zezintambo zokuxhumana ngedatha. Bheka izincwadi: RC8AC.
Umphathi wesistimu / Isango
Bonisa i-EKA 163 / 164
L <15 m
L > 15 m
Ukuxhumana
Kuphelileview kwemiphumela nezinhlelo zokusebenza.
Bheka futhi imidwebo kagesi ekuqaleni komyalelo
DI1
Isiginali yokufaka yedijithali.
Umsebenzi ochaziwe uyasebenza uma okokufaka kufinyeziwe/kuvuliwe. Umsebenzi uchazwa ku-o02.
DI2
Isiginali yokufaka yedijithali.
Umsebenzi ochaziwe uyasebenza uma okokufaka kufinyeziwe/kuvuliwe. Umsebenzi uchazwa ku-o37.
I-pressure transmitter
I-AKS 32R
Xhuma kutheminali 30, 31 kanye no-32.
(Ikhebula esetshenzisiwe 060G1034: Mnyama=30, Blue=31, Brown=32)
Isignali evela kusidlulisi sokucindezela esisodwa ingatholwa abalawuli abangafika kwabayi-10. Kodwa kuphela uma kungekho ukucindezela okubalulekile kuncipha phakathi kwama-evaporator okufanele alawulwe. Bheka umdwebo ekhasini 36.
I-S2, S6
Inzwa ye-Pt 1000 ohm
I-S6, inzwa yomkhiqizo
I-S3, S4, S5
Inzwa ye-Pt 1000 ohm noma inzwa ye-PTC 1000 ohm. Zonke kufanele zibe zohlobo olufanayo.
I-S3, inzwa yomoya, ibekwe emoyeni ofudumele ngaphambi kwe-evaporator
I-S4, inzwa yomoya, ebekwe emoyeni obandayo ngemva kwe-evaporator (isidingo se-S3 noma i-S4 singasuswa ekucushweni) i-S5, inzwa ye-defrost, ibekwe ku-evaporator.
EKA Display
Uma kukhona ukufunda/ukusebenza kwangaphandle kwesilawuli, uhlobo lokubonisa i-EKA 163B noma i-EKA 164B lungaxhunywa.
I-RS485 (itheminali 51, 52, 53)
Okokuxhumana kwedatha, kodwa kuphela uma imojula yokuxhumana kwedatha ishuthekwe kusilawuli. Imojula ingaba yi-LON RS485, DANBUSS noma i-MODBUS.
- Itheminali 51 = isikrini
- Itheminali 52 = A (A+)
- Itheminali 53 = B (B-)
(Nge-LON RS485 kanye nohlobo lwesango elithi AKA 245 isango kufanele libe inguqulo 6.20 noma ngaphezulu.)
RJ45
Ngokuxhumana kwedatha, kodwa kuphela uma imojuli ye-TCP/IP ifakwe kusilawuli. (OEM)
IMODBUS
Okokuxhumana kwedatha.
- Itheminali 56 = isikrini
- Itheminali 57 = A+
- Itheminali 58 = B-
(Okunye amatheminali angaxhunywa ohlotsheni lwesibonisi sangaphandle u-EKA 163A noma 164A, kodwa ngeke asetshenziselwe ukuxhumana kwedatha. Noma yikuphi ukuxhumana ngedatha kufanele kwenziwe ngenye yezindlela.)
Ukunikezwa kwevoltage
230 V ac, 50/60 Hz
DO1
Ukuxhumeka kwe-valve yokwandisa uhlobo lwe-AKV noma i-AKVA. Ikhoyili kufanele ibe yikhoyili engu-230 V ac.
DO2
I-alamu
Kukhona ukuxhumana phakathi kwetheminali engu-7 no-8 ezimeni ze-alamu nalapho isilawuli singenawo amandla.
Ukushisa kukaloliwe kanye nezinto zokushisisa kuthreyi yokuconsa
Kukhona ukuxhumana phakathi kwetheminali 7 kanye ne-9 lapho ukufudumeza kwenzeka.
Impumputhe yasebusuku
Kukhona ukuxhumana phakathi kwetheminali 7 kanye ne-9 lapho i-night blind isiphelile.
I-valve yomugqa wokudonsa
Kukhona ukuxhumana phakathi kwetheminali 7 kanye ne-9 lapho umugqa wokuncela kufanele uvuleke.
DO3
Isiqandisi, Ukushisa kukajantshi, Umsebenzi Wokushisa, I-Defrost 2
Kukhona ukuxhumana phakathi kwetheminali 10 kanye ne-11 lapho umsebenzi kufanele usebenze.
Isici sokushisa kuthreyi yokuconsa
Kukhona ukuxhumana phakathi kwetheminali 10 kanye ne-11 lapho ukufudumeza kwenzeka.
DO4
I-Defrost
Kukhona ukuxhumana phakathi kwetheminali 12 kanye ne-14 lapho ukucwiliswa kweqhwa kwenzeka.
I-valve yegesi eshisayo / yokukhipha amanzi
Kukhona ukuxhumana phakathi kwe-terminal 13 kanye ne-14 ngesikhathi sokusebenza okujwayelekile.
Kukhona ukuxhumana phakathi kwetheminali 12 kanye ne-14 lapho amavalvu egesi ashisayo kufanele avuleke.
DO5
Umlandeli
Kukhona ukuxhumana phakathi kwetheminali 15 kanye ne-16 uma ifeni ivuliwe.
DO6
Ukudlulisa ukukhanya
Kukhona ukuxhumana phakathi kwetheminali engu-17 no-18 lapho isibani kufanele sikhanyise.
Ukushisa kukaloliwe, I-Compressor 2
Kukhona ukuxhumana phakathi kwetheminali 17 kanye ne-19 lapho umsebenzi kufanele usebenze.
DI3
Isiginali yokufaka yedijithali.
Isiginali kufanele ibe nevolumutagi-e ye-0 / 230 V AC.
Umsebenzi uchazwa ku-o84.
Ukuxhumana kwedatha
Uma ukuxhumana kwedatha kusetshenziswa, kubalulekile ukuthi ukufakwa kwekhebula lokuxhumana kwedatha kwenziwe ngendlela efanele.
Bona izincwadi ezihlukene No. RC8AC...
Umsindo kagesi
Amakhebuli wezinzwa, okokufaka kwe-DI kanye nokuxhumana kwedatha kufanele kugcinwe kuhlukene kwezinye izintambo zikagesi:
- Sebenzisa amathreyi ekhebula ahlukene
- Gcina ibanga phakathi kwezintambo okungenani libe ngu-10 cm
- Izintambo ezinde kokokufaka kwe-DI kufanele zigwenywe
Ukucatshangelwa kokufakwa
Ukulimala kwengozi, ukufakwa okungekuhle, noma izimo zesayithi, kungadala ukungasebenzi kahle kohlelo lokulawula, futhi ekugcineni kuholele ekuwohlokeni kwezitshalo. Konke ukuvikela okungenzeka kufakwe emikhiqizweni yethu ukuvimbela lokhu. Nokho, ukufakwa okungalungile, ngokwesiboneloample, isengaletha izinkinga. Izilawuli ze-elekthronikhi azithatheli indawo yomkhuba ojwayelekile, omuhle wobunjiniyela. I-Danfoss ngeke ibe nesibopho sanoma yiziphi izimpahla, noma izingxenye zezitshalo, ezilimele ngenxa yalezi zinkinga ezingenhla. Kuyisibopho somfaki ukuhlola ukufakwa kahle, kanye nokulingana nezisetshenziswa zokuphepha ezidingekayo. Ireferensi ekhethekile yenziwa ngesidingo samasiginali kusilawuli lapho i-compressor imiswa kanye nesidingo sabamukela uketshezi ngaphambi kwama-compressor. I-ejenti yangakini ye-Danfoss izokujabulela ukukusiza ngezinye izeluleko, njll.
I-defrost edidiyelwe ngoxhumo lwekhebula
Izilawuli ezilandelayo zingaxhunywa ngale ndlela:
EKC 204A, AK-CC 210, AK-CC 250, AK-CC 450, AK-CC 550A,
Isiqandisi siqaliswa kabusha lapho zonke izilawuli “zikhulule” isignali yokuncibilika.
I-defrost edidiyelwe ngokuxhumana kwedatha
Ukulungiselelwa kwezilawuli ukuze kudidiyelwe ukuncibilika kwazo kwenzeka kumphathi wesango/wesistimu.
Isiqandisi siqaliswa kabusha lapho zonke izilawuli “zikhulule” isignali yokuncibilika.
Ukusebenza
Bonisa
Amanani azoboniswa namadijithi amathathu, futhi ngesilungiselelo ungakwazi ukunquma ukuthi izinga lokushisa lizoboniswa ngo-°C noma ngo-°F.
Ama-diode akhipha ukukhanya (i-LED) kuphaneli yangaphambili
Ama-LED akuphaneli yangaphambili azokhanya uma i-relay efanele yenziwe yasebenza.
Ama-diode akhipha ukukhanya azokhanya uma kune-alamu.
Kulesi simo ungadawuniloda ikhodi yephutha kusibonisi futhi ukhansele/usayine i-alamu ngokunikeza inkinobho engaphezulu ukusunduza kafushane.
Izinkinobho
Uma ufuna ukushintsha isilungiselelo, izinkinobho ezingenhla nezingezansi zizokunikeza inani eliphezulu noma eliphansi kuye ngenkinobho oyicindezelayo. Kodwa ngaphambi kokuthi ushintshe inani, kufanele ube nokufinyelela kumenyu. Lokhu ukuthola ngokucindezela inkinobho engenhla imizuzwana embalwa - uzofaka ikholomu namakhodi epharamitha. Thola ikhodi yepharamitha ofuna ukuyishintsha bese ucindezela izinkinobho ezimaphakathi kuze kube yilapho kuboniswa inani lepharamitha. Uma usushintshile inani, londoloza inani elisha ngokucindezela futhi inkinobho ephakathi nendawo.
ExampLes
Setha imenyu
- Cindezela inkinobho engenhla kuze kuvele ipharamitha ethi r01
- Cindezela inkinobho engenhla noma engezansi bese uthola leyo pharamitha ofuna ukuyishintsha
- Cindezela inkinobho ephakathi kuze kuvele inani lepharamitha
- Cindezela inkinobho engenhla noma engezansi bese ukhetha inani elisha
- Cindezela inkinobho ephakathi futhi ukuze umise inani.
I-alamu yokusika edluliselwe / i-alamu yerisidi/bona ikhodi ye-alamu
- Ukucindezela okufushane kwenkinobho engenhla
Uma kukhona amakhodi ama-alamu amaningana atholakala ku-rolling stack. Cindezela inkinobho ephezulu kakhulu noma ephansi ukuze uskene isitaki esigoqayo.
Setha izinga lokushisa
- Cindezela inkinobho ephakathi kuze kubonakale inani lokushisa
- Cindezela inkinobho engenhla noma engezansi bese ukhetha inani elisha
- Cindezela inkinobho ephakathi futhi ukuze uphethe isilungiselelo.
Ukufunda izinga lokushisa ku-defrost sensor (Noma inzwa yomkhiqizo, uma ikhethwe ku-o92.)
- Ukucindezela okufushane kwenkinobho engezansi
U-Manuel uqala noma ayeke ukuncibilika
- Cindezela inkinobho engezansi imizuzwana emine.
Qala kahle
Ngenqubo elandelayo ungaqala ukulawulwa ngokushesha okukhulu:
- Vula ipharamitha engu-r12 bese umisa isimiso (eyunithi entsha nengasethiwe ngaphambili, u-r12 uzobe esebekwe ku-0 okusho ukuthi umthetho omisiwe.)
- Khetha ukuxhumana kukagesi okusekelwe emidwebeni esekhasini lesi-2 nelesi-3
- Vula ipharamitha u-o61 bese usetha inombolo yokuxhuma ugesi kuyo
- Manje khetha enye yezilungiselelo ezisethiwe etafuleni
Ishejuli yokusiza yezilungiselelo (ukusetha ngokushesha) Icala Igumbi I-Defrost stop ivuliwe I-Defrost stop ivuliwe isikhathi S5 isikhathi S5 Setha ngaphambilini izilungiselelo (o62) 1 2 3 4 5 6 Izinga lokushisa (SP) 2°C -2°C -28°C 4°C 0°C -22°C Ubukhulu. isikhashana. isilungiselelo (r02) 6°C 4°C -22°C 8°C 5°C -20°C Okuncane. isikhashana. isilungiselelo (r03) 0°C -4°C -30°C 0°C -2°C -24°C Isignali yenzwa ye-thermo-stat. I-S4% (r15) 100% 0% Umkhawulo we-alamu uphezulu (A13) 8°C 6°C -15°C 10°C 8°C -15°C Umkhawulo we-alamu uphansi (A14) -5°C -5°C -30°C 0°C 0°C -30°C Isignali yenzwa ye-alamufunct.S4% (A36) 0% 100% 0% Isikhawu phakathi kwe-defrost(d03) 6 h 6h 12h 8h 8h 6h Inzwa ye-Defrost: 0=isikhathi,1=S5, 2=S4 (d10) 0 1 1 0 1 1 I-DI1 config. (o02) Ukuhlanzwa kwekesi (=10) Umsebenzi womnyango (=2) Isignali yenzwa yokuboniswa view I-S4% (017) 0% - Vula ipharamitha u-o62 bese usetha inombolo yohlu lwezilungiselelo zangaphambili.
Izilungiselelo ezimbalwa ezikhethiwe manje zizodluliselwa kumenyu. - Khetha isiqandisi ngepharamitha o30
- Vula ipharamitha r12 bese uqala umthethonqubo
- Dlula kunhlolovo yezilungiselelo zefekthri. Amanani kumaseli ampunga ashintshwa ngokuya ngezilungiselelo ozikhethayo. Yenza noma yiziphi izinguquko ezidingekayo kumapharamitha afanele.
- Okwenethiwekhi. Setha ikheli ku-o03
- Thumela ikheli kuyunithi yesistimu:
- MODBUS: Yenza kusebenze umsebenzi wokuskena kuyunithi yohlelo
- Uma elinye ikhadi lokuxhumana kwedatha lisetshenziswa kusilawuli:
- I-LON RS485: Yenza kusebenze umsebenzi o04
- I-DANBUSS: Yenza kusebenze umsebenzi wokuskena kuyunithi yesistimu
- I-Ethernet: Sebenzisa Ikheli le-MAC
| Ipharamitha | Umdwebo we-EL ikhasi lesi-2 nelesi-3 | Okuncane.- inani | Ubuningi.- inani | Ifekthri setting | Okwangempela setting |
|||||||||||
| Umsebenzi | Ikhodi | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |||||
| Ukusebenza okuvamile | ||||||||||||||||
| Izinga lokushisa (i-setpoint) | --- | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 2 | ||
| I-Thermostat | ||||||||||||||||
| Umehluko | r01 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0.1 K | 20 K | 2 | ||
| Ubukhulu. umkhawulo wokusetha iphuzu | r02 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -49°C | 50°C | 50 | ||
| Okuncane. umkhawulo wokusetha iphuzu | r03 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 49°C | -50 | ||
| Ukulungiswa kwenkomba yokushisa | r04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10 | 10 | 0 | ||
| Iyunithi yezinga lokushisa (°C/°F) | r05 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/°C | 1 / F | 0/°C | ||
| Ukulungiswa kwesiginali kusuka ku-S4 | r09 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10 k | 10 K | 0 | ||
| Ukulungiswa kwesiginali kusuka ku-S3 naku-S3B | r10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10 k | 10 K | 0 | ||
| Isevisi yezandla, ukumisa isimiso, ukuqala isimiso (-1, 0, 1) | r12 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -1 | 1 | 0 | ||
| Ukususwa kwereferensi ngesikhathi sokusebenza ebusuku | r13 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50 k | 50 K | 0 | ||
| Chaza umsebenzi we-thermostat 1=KUVULIWE/KUVALIWE, 2=Ukumodela | r14 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 1 | ||
| Incazelo kanye nesisindo, uma sikhona, se-thermostat izinzwa – S4% (100%=S4, 0%=S3) |
r15 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 % | 100 % | 100 | ||
| Isikhathi phakathi kwezikhathi zokuncibilika | r16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 amahora | 10 amahora | 1 | ||
| Ubude bezikhathi zokuncibilika | r17 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 30 imiz. | 5 | ||
| Ukulungiselelwa kwezinga lokushisa kwebhendi ye-thermostat 2. Njengokusetshenziswa okuhlukile r01 | r21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 2 | ||
| Ukulungiswa kwesiginali kusuka ku-S6 | r59 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10 k | 10 K | 0 | |||
| Incazelo kanye nesisindo, uma sikhona, sezinzwa ze-thermostat uma ikhava yasebusuku ivuliwe. (100%=S4, 0%=S3) | r61 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 % | 100 % | 100 | ||
| Umsebenzi wokushisa
Indawo emaphakathi phakathi kwesiqandisi nomsebenzi wokushisa |
r62 | 1 | 0 K | 50 K | 2 | |||||||||||
| Ukubambezeleka kwesikhathi ekushintsheni phakathi kwesiqandisi nomsebenzi wokushisa | r63 | 1 | 0 imiz. | 240 imiz. | 0 | |||||||||||
| Ama-alamu | ||||||||||||||||
| Ukubambezeleka kwe-alamu yezinga lokushisa | A03 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 30 | ||
| Ukubambezeleka kwe-alamu yomnyango | A04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 60 | ||
| Ukubambezeleka kwe-alamu yezinga lokushisa ngemva kokumiswa kweqhwa | A12 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 90 | ||
| Umkhawulo we-alamu ophezulu we-thermostat 1 | A13 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 8 | ||
| Umkhawulo we-alamu ophansi we-thermostat 1 | A14 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | -30 | ||
| Umkhawulo we-alamu ophezulu we-thermostat 2 | A20 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 8 | ||
| Umkhawulo we-alamu ophansi we-thermostat 2 | A21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | -30 | ||
| Umkhawulo we-alamu ephezulu yenzwa ye-S6 ku-thermostat 1 | A22 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 8 | |||
| Umkhawulo we-alamu ophansi we-sensor S6 ku-thermostat 1 | A23 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | -30 | |||
| Umkhawulo we-alamu ephezulu yenzwa ye-S6 ku-thermostat 2 | A24 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 8 | |||
| Umkhawulo we-alamu ophansi we-sensor S6 ku-thermostat 2 | A25 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | -30 | |||
| Ukubambezeleka kwesikhathi se-alamu ye-S6
Ngokusethwa = 240 i-alamu ye-S6 izokhishwa |
A26 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 240 | |||
| Ukubambezeleka kwesikhathi se-alamu noma isignali kokokufaka kwe-DI1 | A27 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 30 | ||
| Ukubambezeleka kwesikhathi se-alamu noma isignali kokokufaka kwe-DI2 | A28 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 30 | ||
| Isiginali ye-alamu thermostat. I-S4% (100%=S4, 0%=S3) | A36 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 % | 100 % | 100 | ||
| Ukubambezeleka kwe-S6 (i-alamu yenzwa yomkhiqizo) ngemva kokuncibilika | A52 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 90 | |||
| Ukubambezeleka kwe-alamu yezinga lokushisa i-S3B | A53 | 1 | 1 | 0 imiz. | 240 imiz. | 90 | ||||||||||
| I-Compressor | ||||||||||||||||
| Okuncane. Ngesikhathi | c01 | 1 | 1 | 1 | 1 | 0 imiz. | 30 imiz. | 0 | ||||||||
| Okuncane. ISIKHATHI esingasebenzi | c02 | 1 | 1 | 1 | 1 | 0 imiz. | 30 imiz. | 0 | ||||||||
| Ukubambezeleka kwesikhathi sokunqunywa kwe-com.2 | c05 | 1 | 0 isekhondi | 999 isekhondi | 5 | |||||||||||
| I-Defrost | ||||||||||||||||
| Indlela yokuncibilika: 0=Cishiwe, 1= EL, 2= Igesi | d01 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Cishiwe | 2/gAs | 1/EL | ||
| Defrost stop lokushisa | d02 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0°C | 50°C | 6 | ||
| Isikhawu phakathi kokuqala kwe-defrost | d03 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | Amahora angu-0/Cishiwe | 240 amahora | 8 | ||
| Ubukhulu. ubude be-defrost | d04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 360 imiz. | 45 | ||
| Ukushintshwa kwesikhathi ekunqanyulweni kwe-defrost ekuqaleni | d05 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 0 | ||
| Isikhathi sokuphumula | d06 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 60 imiz. | 0 | ||
| Ukubambezeleka kokuqala kwefeni ngemva kokumiswa kwesithwathwa | d07 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 60 imiz. | 0 | ||
| Izinga lokushisa lokuqala labalandeli | d08 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50 °C | 0 °C | -5 | ||
Ifeni ingene ngesikhathi sokuncibilika kweqhwa 0: Imisiwe
|
d09 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 1 | ||
| Iyaqhubeka | Ikhodi | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Okuncane. | Ubukhulu. | I-Fac. | Okwangempela | |
| Inzwa ye-Defrost: 0 =Misa ngesikhathi, 1=S5, 2=S4, 3=Sx (Isicelo 1-8 no-10: kokubili i-S5 ne-S6. Isicelo 9: S5 kanye ne-S5B) |
d10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 3 | 0 | ||
| Pump phansi ukubambezeleka | d16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 60 imiz. | 0 | ||
| Ukubambezeleka kokukhipha (okusetshenziswa ekushiseni kwegesi eshisayo kuphela) | d17 | 1 | 0 imiz. | 60 imiz. | 0 | |||||||||||
| Ubukhulu. isikhathi sesiqandisi esihlanganisiwe phakathi kwama-defrosts amabili | d18 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 amahora | 48 amahora | 0/VALIWE | ||
| Shisisa kuthreyi yokudonsa. Isikhathi ukusuka ezitobhini zokuncibilikisa ukuya ekushisiseni kuthreyi yokuconsa sivaliwe | d20 | 1 | 0 imiz. | 240 imiz. | 30 | |||||||||||
| I-Adaptive defrost: 0=ayisebenzi, 1=ukuqapha kuphela, 2=yeqa usuku oluvunyelwe, 3=ukweqa kuvunyelwe kokubili imini nobusuku, 4=ukuhlola okwakhe + wonke amashejuli |
d21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 4 | 0 | ||
| Ukubambezeleka kwesikhathi ngaphambi kokuvulwa kwe-valve yegesi eshisayo | d23 | 1 | 0 imiz | 60 imiz | 0 | |||||||||||
| Ukushisa kukaloliwe ngesikhathi sokuncibilika kweqhwa 0=off. 1=kuvuliwe. 2=Ukudonsa | d27 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 2 | |||||
| Ubukhulu. ubude besikhathi -d- ekubonisweni | d40 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 5 imiz. | 240 imiz. | 30 imiz. | ||
| Umkhawulo wezinga lokushisa lokuma kwabalandeli ngesikhathi sokuncibilika uma u-d09 usethelwe ku-3 | d41 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -20°C | 20°C | 0°C | ||
| Umsebenzi wokulawula umjovo | ||||||||||||||||
| Ubukhulu. inani lereferensi yokushisa okuphezulu (ukunwetshwa okomile) | n09 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2°C | 20°C | 12 | ||
| Okuncane. inani lereferensi yokushisa okuphezulu (ukunwetshwa okomile) | n10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2°C | 20°C | 3 | ||
| Izinga lokushisa le-MOP. Vala uma izinga lokushisa le-MOP. = 15.0 °C | n11 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 15°C | 15 | ||
| Isikhathi se-AKV pulsation Kuphela kubasebenzi abaqeqeshiwe | n13 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 3 isekhondi | 6 isekhondi | 6 | ||
| Umkhawulo omkhulu wereferensi yokushisa okuphezulu lapho isikhukhula sisebenza | P86 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1°C | 20°C | 3 | ||
| Umkhawulo omncane wereferensi yokushisa okuphezulu lapho isikhukhula sisebenza | P87 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0°C | 20°C | 1 | ||
| Umlandeli | ||||||||||||||||
| Izinga lokushisa lokumisa abalandeli (S5) | F04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -50°C | 50°C | 50 | ||
| Ukusebenza kokushaya kwenhliziyo kubalandeli: 0=Akukho kushaya kwenhliziyo, 1=Ku-thermostat kuyanqamuka kuphela, 2= Kunqamuka kuphela ku-thermostat ngesikhathi sokusebenza ebusuku. | F05 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 0 | ||
| Isikhathi sesikhathi sokushaywa kwabalandeli (ngesikhathi + nesikhathi esingekho) | F06 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 imiz. | 30 imiz. | 5 | ||
| Ngesikhathi ku-% wesikhathi | F07 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 % | 100 % | 100 | ||
| Isikhathi sangempela sewashi | ||||||||||||||||
| Izikhathi eziyisithupha zokuqala zokuncibilika. Ukusetha amahora. 0 = VALIWE |
t01 -t06 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 amahora | 23 amahora | 0 | ||
| Izikhathi eziyisithupha zokuqala zokuncibilika. Ukusethwa kwamaminithi. 0 = VALIWE |
t11 -t16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 59 imiz. | 0 | ||
| Iwashi - Ukusetha amahora | t07 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 amahora | 23 amahora | 0 | ||
| Iwashi - Ukusetha umzuzu | t08 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 59 imiz. | 0 | ||
| Iwashi – Ukusetha usuku | t45 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 usuku | 31 usuku | 1 | ||
| Iwashi – Ukulungiselelwa kwenyanga | t46 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 inyanga. | 12 inyanga. | 1 | ||
| Iwashi - Ukuhlelwa konyaka | t47 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 unyaka | 99 unyaka | 0 | ||
| Okunhlobonhlobo | ||||||||||||||||
| Ukubambezeleka kwamasignali okukhiphayo ngemva kokuhluleka kwamandla | o01 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 isekhondi | 600 isekhondi | 5 | ||
| Isiginali yokokufaka ku-DI1. Umsebenzi: 0=ayisetshenziswanga. 1=isimo ku-DI1. 2=umsebenzi womnyango one-alamu uma uvuliwe. 3=i-alamu yomnyango uma ivuliwe. 4=ukuqala kokuncibilika (i-pulse-signal). 5=ex. inkinobho enkulu. 6=ukusebenza kwasebusuku 7=ukushintsha kwebhendi ye-thermostat (sebenzisa u-r21). 8=i-alamu uma ivaliwe. 9=i-alamu uma ivuliwe. 10=ukuhlanzwa kwekesi (i-pulse signal). 11=ukupholisa okuphoqiwe endaweni yokuncibilika kwegesi eshisayo, 12=ikhava yasebusuku. 15=ukuvalwa kwensiza. 20=i-alamu yokuvuza kwesiqandisi. 21=vula izikhukhula. |
o02 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 21 | 0 | ||
| Ikheli lenethiwekhi | o03 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 240 | 0 | ||
| Vula/Vala switch (Umlayezo Wephinikhodi Yesevisi) KUBALULEKILE! o61 kufanele ibekwe ngaphambi kwe-o04 (isetshenziswe ku-LON 485 kuphela) | o04 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Cishiwe | 1/Vuliwe | 0/Cishiwe | ||
| Ikhodi yokufinyelela 1 (zonke izilungiselelo) | o05 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 100 | 0 | ||
| Uhlobo lwenzwa esetshenzisiwe : 0=Pt1000, 1=Ptc1000, | o06 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Pt | 1/Ptc | 0/Pt | ||
| Isikhathi esiphezulu sokubamba ngemva kokumiswa kweqhwa okuhlanganisiwe | o16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 360 imiz. | 20 | ||
| Khetha isignali ukuze ubonise view. I-S4% (100%=S4, 0%=S3) | o17 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 % | 100 % | 100 | ||
| Ibanga lokusebenza le-pressure transmitter - min. inani | o20 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -1 ibha | 5 ibha | -1 | ||
| Ibanga lokusebenza le-pressure transmitter - max. inani | o21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 6 ibha | 200 ibha | 12 |
| Iyaqhubeka | Ikhodi | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Okuncane. | Ubukhulu. | I-Fac. | Okwangempela | |
| Ukulungiselelwa kwesiqandisi:
1=R12. 2=R22. 3=R134a. 4=R502. 5=R717. 6=R13. |
o30 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 42 | 0 | ||
| Isiginali yokokufaka ku-DI2. Umsebenzi:
(0=akusetshenziswanga. 1=isimo ku-DI2. 2=umsebenzi womnyango one-alamu uma uvuliwe. 3=i-alamu yomnyango uma ivuliwe. 4=ukuqala kokuncibilika kweqhwa (i-pulse-signal). 5=ext. main switch 6=ukusebenza kwasebusuku 7=ukushintsha kwebhendi ye-thermostat (yenza kusebenze u-r21). 8=i-alamu uma ivaliwe. 9=i-alamu uma ivaliwe. XNUMX=i-alamu |
o37 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 21 | 0 | ||
| Ukucushwa kokusebenza kokukhanya: 1=Ukukhanya kulandela ukusebenza kwemini/ebusuku, 2=Ukulawula ukukhanya ngokuxhumana kwedatha nge-'o39', 3=Ukulawula ukukhanya nge-DI-input, 4=Njenge-“2”, kodwa inkinobho yokukhanyisa kanye nekhava yasebusuku izovuleka uma inethiwekhi inqamuka ngaphezu kwemizuzu eyi-15. | o38 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 4 | 1 | ||||
| Ukwenziwa kusebenze kokudluliswa kokukhanya (kuphela uma o38=2) Kuvuliwe=ukukhanya | o39 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Cishiwe | 1/Vuliwe | 0/Cishiwe | ||||
| Ukushisa kukaloliwe Ngesikhathi ngesikhathi sokusebenza kosuku | o41 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 % | 100 % | 100 | |||||
| Ukushisa kukaloliwe Ngesikhathi ngesikhathi sokusebenza ebusuku | o42 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 % | 100 % | 100 | |||||
| Isikhathi sokushisa kukaloliwe (Isikhathi + nesikhathi sokungasebenzi) | o43 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 6 imiz. | 60 imiz. | 10 | |||||
| Ukuhlanzwa kwecala. 0=akukho ukuhlanzwa kwekesi. 1=Abalandeli kuphela. 2=Konke okukhiphayo Kuvaliwe. | *** | o46 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 0 | |
| Ukukhethwa komdwebo we-EL. Bona ngaphaview ikhasi lesi-12 nelesi-13 | * | o61 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 10 | 1 | |
| Landa isethi yezilungiselelo ezinqunywe kusengaphambili. Bona ngaphaview ikhasi 27. | * | o62 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 6 | 0 | |
| Ikhodi yokufinyelela 2 (ukufinyelela ingxenye) | *** | o64 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 100 | 0 | |
| Shintshanisa izilungiselelo zasembonini zezilawuli ngezilungiselelo zamanje | o67 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0/Cishiwe | 1/Vuliwe | 0/Cishiwe | ||
| Isiginali yokokufaka ku-DI3. Umsebenzi: (high voltage okokufaka) (0=ayisetshenziswanga. 1=isimo ku-DI2. 2=umsebenzi womnyango one-alamu uma uvuliwe. 3=i-alamu yomnyango uma ivuliwe. 4=ukuqala kokuncibilika kweqhwa (i-pulse-signal). 5=ext. main switch 6=ukusebenza kwasebusuku, 7=i-thermostat band changeover (cupha u-r21). 8=Ayisetshenziswanga. 9=Isiginali ye-pulse ayisetshenzisiwe. . 11=ukupholisa okuphoqiwe endaweni yokuncibilika kwegesi eshisayo, 12=ikhava yasebusuku. 13=Ayisetshenziswanga. 14=Isiqandisi simile (ukuvala ngenkani)). 15=ukuvalwa kwensiza. 21=vula izikhukhula. |
o84 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 21 | 0 | ||
| Ukulawula ukushisa kukaloliwe 0=akusetshenzisiwe, 1=ukulawula ukushaya kwenhliziyo ngokusebenza kwe-timer (o41 no-o42), 2=ukulawula ukushaya kwenhliziyo ngephuzu lamazolo |
o85 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 2 | 0 | |||||
| Inani lephoyinti lamazolo lapho ukushisa kukaloliwe kuncane | o86 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -10°C | 50°C | 8 | |||||
| Inani lephoyinti lamazolo lapho ukushisa kukaloliwe kuvuliwe ngo-100%. | o87 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | -9°C | 50°C | 17 | |||||
| Umthelela ophansi ovunyelwe wokushisa ujantshi ku-% | o88 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 % | 100 % | 30 | |||||
| Ukubambezeleka kwesikhathi kusuka esiqandisini "somnyango ovulekile" siqalisiwe | o89 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 imiz. | 240 imiz. | 30 | ||
| Ukusebenza kwabalandeli kusiqandisi esimisiwe (ukuvalwa okuphoqelelwe): 0 = Kumisiwe (ukuncibilika kuvunyelwe) 1 = Ukugijima (ukuncibilika kuvunyelwe) I-2 = Kumisiwe (ukususa iqhwa akuvunyelwe) 3 = Ukugijima (ukususa iqhwa akuvunyelwe) |
o90 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 3 | 1 | ||
| Incazelo yokufundwayo enkinobho engezansi: 1=izinga lokushisa lokumisa iqhwa, 2=S6 izinga lokushisa, 3=S3 izinga lokushisa , 4=S4 izinga lokushisa |
o92 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 3 | 1 | ||
| Ukuboniswa kwezinga lokushisa 1= U56 Izinga lokushisa lomoya (lisethwe ngokuzenzakalelayo libe ngu-1 ekusetshenzisweni 9) 2= izinga lokushisa lomkhiqizo elingu-u36 |
o97 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 1 | ||
| Izimpumputhe zokukhanya nobusuku zichaziwe
0: Ukukhanya kuyacishwa futhi i-night blind ivuliwe uma iswishi eyinhloko icishiwe |
o98 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 |
| Iyaqhubeka | Ikhodi | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Okuncane. | Ubukhulu. | I-Fac. | Okwangempela | |
| Ukucushwa kwe-alamu edluliselwe I-alamu edluliselwe izosebenza kusignali ye-alamu evela kumaqembu alandelayo: 0 – I-alamu ayisetshenziswanga 1 - Ama-alamu okushisa aphezulu 2 – Ama-alamu okushisa aphansi 4 – Iphutha lenzwa 8 - Okokufaka kwedijithali kunikwe amandla i-alamu 16 - Ama-alamu acisha isithwathwa 32 – Ingxubevange 64 – Ama-alamu omjovo Amaqembu azocupha ukudluliswa kwe-alamu kufanele asethwe kusetshenziswa inani lenombolo okuyisamba samaqembu okufanele enziwe asebenze. (Isb: inani elingu-5 lizokwenza kusebenze wonke ama-alamu okushisa okuphezulu nawo wonke amaphutha enzwa. |
P41 | 1 | 1 | 1 | 1 | 1 | 0 | 127 | 111 | |||||||
| Isevisi | ||||||||||||||||
| Izinga lokushisa likalwe ngenzwa ye-S5 | u09 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | *) Ingasethwa kuphela uma umthetho umisiwe (r12=0) **) Ingalawulwa ngesandla, kodwa kuphela uma r12=-1 ***) Ngekhodi yokungena 2 ukufinyelela kulawa mamenyu kuzoba nomkhawulo Izilungiselelo zasefekthri zikhonjiswe amayunithi ajwayelekile. Ezinye izinombolo zekhodi zinezilungiselelo ezenziwe ngokwezifiso. |
||||
| Isimo kokokufaka kwe-DI1. ku/1=kuvaliwe | u10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Isikhathi sangempela sokuncibilika (amaminithi) | u11 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa likalwe ngenzwa ye-S3 | u12 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Isimo sokusebenza ebusuku (kuvuliwe noma kuvaliwe) 1=kuvuliwe | u13 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa likalwe ngenzwa ye-S4 | u16 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa le-thermostat | u17 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||
| Isikhathi sokuqalisa se-thermostat (isikhathi sokupholisa) ngamaminithi | u18 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa le-evaporator outlet temp. | u20 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Ukushisa okuphezulu kuyo yonke i-evaporator | u21 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Ireferensi yokulawula ukushisa okuphezulu | u22 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Idigri yokuvula ye-valve ye-AKV | ** | u23 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||
| Umfutho ohwamukayo u-Po (isihlobo) | u25 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa le-Evaporator Kuya (kubaliwe) | u26 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa likalwe ngenzwa ye-S6 (izinga lokushisa lomkhiqizo) | u36 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||||
| Isimo ekuphumeni kwe-DI2. ku/1=kuvaliwe | u37 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa lomoya . Isisindo se-S3 ne-S4 | u56 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa elilinganiselwe le-alamu thermostat | u57 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Isimo ku-relay yokupholisa | ** | u58 | 1 | 1 | 1 | 1 | ||||||||||
| Isimo ekudlulisweni kwefeni | ** | u59 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||
| Isimo ekudlulisweni kwe-defrost | ** | u60 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Isimo ekudluliseni ukushisa kukaloliwe | ** | u61 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||
| Isimo ekudlulisweni kwe-alamu | ** | u62 | 1 | 1 | 1 | 1 | 1 | |||||||||
| Isimo ekudlulisweni kokukhanya | ** | u63 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||||
| Isimo ku-relay ye-valve kumugqa wokumunca | ** | u64 | 1 | |||||||||||||
| Isimo ekudlulisweni kwe-compressor 2 | ** | u67 | 1 | |||||||||||||
| Izinga lokushisa likalwe ngenzwa ye-S5B | u75 | 1 | ||||||||||||||
| Izinga lokushisa likalwe ngenzwa ye-S3B | u76 | 1 | 1 | |||||||||||||
| Isimo sokudluliswa kwegesi eshisayo-/ivalvu yokukhipha amanzi | ** | u80 | 1 | |||||||||||||
| Isimo ekudlulisweni kwento yokushisisa kuthreyi yokuconsa | ** | u81 | 1 | |||||||||||||
| Isimo ekudlulisweni kwamakhethini ebusuku | ** | u82 | 1 | |||||||||||||
| Isimo ku-relay ye-defrost B | ** | u83 | 1 | |||||||||||||
| Isimo ekudlulisweni komsebenzi wokushisa | ** | u84 | 1 | |||||||||||||
| Ukufundwa komphumela wangempela wokushisa ujantshi | u85 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||||||
| 1: I-Thermostat 1 isebenza, 2: I-Thermostat 2 iyasebenza | u86 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Isimo sevolumu ephezulutagfaka i-DI3 | u87 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Ukufundwa kwama-thermostats kuncishiswe inani langempela | u90 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Ukufundwa kwama-thermostats inani langempela lokusika | u91 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Ukufundwa kwesimo ku-defrost eguquguqukayo 0: Valiwe. Umsebenzi awucushiwe futhi ziro zisethwe 1: Iphutha lenzwa noma i-S3/S4 ihlehlisiwe. 2: Ukushuna kuyaqhubeka 3: Okujwayelekile 4: Ukwakheka kweqhwa okulula 5: Ukwakheka kweqhwa okumaphakathi 6: Ukunqwabelana kweqhwa kanzima |
U01 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Inani lokuncibilika okwenziwe kusukela ekuvusweni kwamandla kokuqala noma kusukela ekusethwe kabusha komsebenzi | U10 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Inombolo yokuncibilika kweqiwe kusukela ekuvusweni kwamandla okuqala noma kusukela ekusethwe kabusha komsebenzi | U11 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||
| Izinga lokushisa elilinganiselwe le-alamu thermostat esigabeni B | U34 | 1 | 1 | |||||||||||||
| Izinga lokushisa lomoya esigabeni B | U35 | 1 | 1 | |||||||||||||
| Umlayezo wephutha | ||
| Esimeni sephutha ama-LED angaphambili azokhanya futhi i-alamu edluliselwe izosebenza. Uma ucindezela inkinobho ephezulu kulesi simo ungabona umbiko we-alamu kusibonisi. Kunezinhlobo ezimbili zemibiko yamaphutha - kungaba i-alamu eyenzeka phakathi nokusebenza kwansuku zonke, noma kungase kube khona iphutha ekufakeni. Ama-alamu ngeke abonakale kuze kube yilapho ukubambezeleka kwesikhathi esimisiwe kuphelelwe yisikhathi. Ama-alamu e-E, ngakolunye uhlangothi, azobonakala lapho iphutha lenzeka. (I-alamu ngeke ibonakale inqobo nje uma kukhona i-alamu ka-E esebenzayo). Nansi imilayezo engavela: |
||
| Ikhodi / Umbhalo we-alamu ngokuxhumana kwedatha | Incazelo | Amaqembu e-alamu edluliselwe (P41) |
| A1/— Phezulu t. i-alamu | I-alamu yokushisa ephezulu | 1 |
| A2/— Okuphansi t. i-alamu | I-alamu yezinga lokushisa eliphansi | 2 |
| A4/— I-alamu yomnyango | I-alamu yomnyango | 8 |
| A5/— Isikhathi sokubamba esiphezulu | Umsebenzi we-"o16" wenziwa wasebenza ngesikhathi sokumiswa kweqhwa okuhlanganisiwe | 16 |
| A10/— Jova umjovo. | Inkinga yokulawula | 64 |
| A11/— Ayikho i-Rfg. sel. | Asikho isiqandisi esikhethiwe | 64 |
| A13/— Izinga lokushisa eliphezulu S6 | I-alamu yezinga lokushisa. Inani eliphakeme kakhulu lama-S6 | 1 |
| A14/— Izinga lokushisa eliphansi S6 | I-alamu yezinga lokushisa. Inani eliphakeme kakhulu lama-S6 | 2 |
| I-alamu ye-A15/— DI1 | I-alamu ye-DI1 | 8 |
| I-alamu ye-A16/— DI2 | I-alamu ye-DI2 | 8 |
| A45/— Imodi yokulinda | Indawo elindile (isiqandisi esimisiwe nge-r12 noma i-DI input) | - |
| A59/— Ikesi lihlanzekile | Ukuhlanzwa kwecala. Isignali evela ku-DI input | - |
| A70/— Izinga lokushisa eliphezulu S3B | I-alamu yokushisa okuphezulu, isigaba B | 1 |
| A71/— Izinga lokushisa eliphansi S3B | I-alamu yezinga lokushisa eliphansi, isigaba B | 2 |
| AA2/— Refg. ukuvuza | I-alamu yokuvuza kwesiqandisi | 8 |
| AA3/— i-alamu ye-CO2 | I-alamu yokuvuza ye-CO2 | 8 |
| - Iphutha le-AD | Iphutha kumsebenzi wokumisa iqhwa | 16 |
| - AD Iced | I-Evaporator ifakwe eqhweni. Ukuncishiswa kokugeleza komoya | 16 |
| - I-AD ayishintshi. | Ukuncishiswa kwe-evaporator akugculisi | 16 |
| - AD flash gas. | I-flash gas yakheka ku-valve | 16 |
| E1/— Ctrl. iphutha | Amaphutha kusilawuli | 32 |
| E6/— Iphutha le-RTC | Hlola iwashi | 32 |
| E20/— Pe iphutha | Iphutha kusidlulisi somfutho we-Pe | 64 |
| E24/— Iphutha le-S2 | Iphutha kunzwa ye-S2 | 4 |
| E25/— Iphutha le-S3 | Iphutha kunzwa ye-S3 | 4 |
| E26/— Iphutha le-S4 | Iphutha kunzwa ye-S4 | 4 |
| E27/— Iphutha le-S5 | Iphutha kunzwa ye-S5 | 4 |
| E28/— Iphutha le-S6 | Iphutha kunzwa ye-S6 | 4 |
| E34/— Iphutha le-S3 B | Iphutha kunzwa ye-S3B | 4 |
| E37/— Iphutha le-S5 B | Iphutha kunzwa ye-S5B | 4 |
| —/— I-Max Def. Isikhathi | I-Defrost imisiwe ngokusekelwe esikhathini esikhundleni sokuthi, njengoba bekufuna, kuzinga lokushisa | 16 |
| Isimo sokusebenza | (Isikali) | |
| Isilawuli sidlula ezimeni ezithile zokulawula lapho sivele silinde iphuzu elilandelayo lomthethonqubo. Ukuze wenze lezi zimo "kungani kungenzeki lutho" zibonakale, ungabona isimo sokusebenza esibonisini. Cindezela kafushane (1s) inkinobho engenhla. Uma kunekhodi yesimo, izovezwa esibukweni. Amakhodi esimo angawodwana anezincazelo ezilandelayo: | Ctrl. isimo: (Kukhonjiswa kuzo zonke izibonisi zemenyu) | |
| Umthethonqubo ojwayelekile | S0 | 0 |
| Ilinde ukuphela kwe-defrost ehlanganisiwe | S1 | 1 |
| Uma i-compressor isebenza kufanele isebenze okungenani imizuzu engu-x. | S2 | 2 |
| Uma i-compressor imisiwe, kufanele ihlale imile okungenani imizuzu engu-x. | S3 | 3 |
| I-evaporator iyaconsa bese ilinda ukuthi isikhathi siphele | S4 | 4 |
| Isiqandisi simiswe ngokushintsha okukhulu. Nge-r12 noma i-DI-input | S10 | 10 |
| Isiqandisi simiswe yi-thermostat | S11 | 11 |
| Defrost ukulandelana. Ukumiswa kweqhwa kuyaqhubeka | S14 | 14 |
| Defrost ukulandelana. Ukubambezeleka kwabalandeli - amanzi anamathela ku-evaporator | S15 | 15 |
| Isiqandisi simisiwe ngenxa yokuvula okokufaka kwe-ON noma ukumiswa komthetho | S16 | 16 |
| Umnyango uvuliwe. Okokufaka kwe-DI kuvuliwe | S17 | 17 |
| Umsebenzi wokuncibilikisa uyaqhubeka. Isiqandisi siphazamisekile | S18 | 18 |
| Ilungisa isilawuli se-thermostat | S19 | 19 |
| Ukupholisa okuphuthumayo ngenxa yephutha lenzwa *) | S20 | 20 |
| Inkinga yokulawula emsebenzini womjovo | S21 | 21 |
| Isigaba sokuqala sesi-2. I-Evaporator iyashajwa | S22 | 22 |
| Ukulawula okuguquguqukayo | S23 | 23 |
| Isigaba sokuqala 1. Ukuthembeka kwesignali kusuka kuzinzwa kuyalawulwa | S24 | 24 |
| Ukulawula okuphumayo mathupha | S25 | 25 |
| Asikho isiqandisi esikhethiwe | S26 | 26 |
| Ukuhlanzwa kwecala | S29 | 29 |
| Ukupholisa ngempoqo | S30 | 30 |
| Ukubambezeleka kokuphumayo ngesikhathi sokuqalisa | S32 | 32 |
| Umsebenzi wokushisa u-r36 uyasebenza | S33 | 33 |
| Ukuvala umshini | S45 | 45 |
| Izikhukhula ziyashabalala. umsebenzi uyasebenza | S48 | 48 |
| Eminye imibukiso: | ||
| Izinga lokushisa le-defrost alikwazi ukuboniswa. Kukhona ukuma okusekelwe esikhathini | hhayi | |
| Ukuncibilika kuyaqhubeka / Ukupholisa kokuqala ngemva kokumiswa kweqhwa | -d- | |
| Kudingeka iphasiwedi. Setha iphasiwedi | PS | |
| Umthetho umiswa nge-main switch | VALIWE |
*) Ukupholisa isimo esiphuthumayo kuzosebenza uma kuntuleka isignali evela kunzwa ye-S3 noma i-S4 echaziwe. Umthethonqubo uzoqhubeka nokuncishiswa okumaphakathi okubhalisiwe. Kunamanani amabili abhalisiwe - elilodwa elokusebenza emini nelilodwa elokusebenza ebusuku.
Ukuxhumana kwedatha
Ukubaluleka kwama-alamu angawodwana kungachazwa ngesilungiselelo. Ukulungiselelwa kufanele kwenziwe eqenjini "Izindawo ze-alamu"
| Izilungiselelo ezivela Umphathi wesistimu |
Izilungiselelo ezivela I-AKM (indawo ye-AKM) |
Ilogi | I-alamu edluliselwe | Thumela nge Inethiwekhi |
||
| Cha | Phezulu | Phansi-Phezulu | ||||
| Phezulu | 1 | X | X | X | X | |
| Maphakathi | 2 | X | X | X | ||
| Phansi | 3 | X | X | X | ||
| Ngena kuphela | X | |||||
| Ikhutshaziwe | ||||||
FAQ
- Iluphi uhlobo lwekhebula okufanele lusetshenziselwe ukuxhumana kwedatha?
A: Ukuxhumana kwedatha I-MODBUS, i-DANBUSS, nokuxhumeka kwe-RS485 kufanele kuthobelane nezimfuneko zezintambo zokuxhumana zedatha. Bheka izincwadi: RC8AC ukuze uthole imininingwane. - Bangaki abalawuli abangathola isignali kumshicileli oyedwa wokucindezela?
A: Isignali evela kusidlulisi somfutho esisodwa ingatholwa izilawuli ezingafika kweziyi-10, inqobo nje uma kungekho ukuncipha kwengcindezi ebalulekile phakathi kwezihwamuko okufanele zilawulwe. - Yiziphi izicaciso zokunikezwa kwamandla?
A: Umkhiqizo udinga umthamo wokunikezelatage ka-230 V ac, 50/60 Hz.
Amadokhumenti / Izinsiza
 |
I-Danfoss AK-CC 550B Case Controller [pdf] Iziyalezo AK-SM..., AK-CC 550B, AKA 245 inguqulo 6.20, AK-CC 550B Case Controller, AK-CC 550B, Case Controller, Controller |
