Okuqukethwe fihla
1 I-Danfoss 102E7 I-7 Day Electronic Mini Programmer
2 Ukucaciswa komkhiqizo
3 Ukufakwa
4 Izintambo
5 Ukushintshwa
6 Imiyalo yomsebenzisi
7 Ukubeka isikhathi nosuku olulungile
8 Ama-Preset asezimboni
9 Ukwamukela izikhathi ezimisiwe
10 Ukuhlela iyunithi - Imodi yezinsuku eziyi-5/2
11 Iqalisa uhlelo lwakho
12 Ukukhishwa Kwesikhashana Kwabasebenzisi
13 Isipele sebhethri
14 FAQ
15 Amadokhumenti / Izinsiza
15.1 Izithenjwa

I-Danfoss-logo

I-Danfoss 102E7 I-7 Day Electronic Mini Programmer

I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-product

U-Danfoss akakwazi ukwamukela isibopho ngamaphutha angaba khona kumakhathalogi, izincwajana, nokunye okuphrintiwe. Zonke izimpawu zokuhweba kule nto ziyimpahla yezinkampani ezifanele. I-Danfoss kanye nohlobo lwelogo ye-Danfoss yizimpawu zokuthengisa ze-Danfoss A/S. Wonke Amalungelo Agodliwe.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (1)

Ngicela uqaphele:

Lo mkhiqizo kufanele ufakwe kuphela umuntu osebenza ngogesi oqeqeshiwe noma isifaki sokushisisa esinekhono futhi kufanele uhambisane nohlelo lwamanje lwemithetho ye-IEEE yezintambo.

Ukucaciswa komkhiqizo

Ukucaciswa
Ukunikezwa kwamandla kagesi 230 Vac ± 15%, 50 Hz
Ukushintsha isenzo 1 x SPST, Uhlobo 1B
Ubukhulu. Shintsha isilinganiso 264Vac, 50/60Hz, 3(1)A
Ukusebenza/Ukusetha Ukunemba ±1 iminithi./ngenyanga
Isikhungo samandla Amahora angu-24 okungenani
Ubukhulu. I-Ambient Temperature 45°C
Ubukhulu, mm (W, H, D) 102 x 136 x 47
Idizayini ejwayelekile EN 60730-2-7
Lawula Isimo Sokungcola Isiqu 2
Kukalwe Impulse Voltage 2.5kv
I-Ball Pressure Test 75°C

Ukufakwa

NB. Kumayunithi e-FRU, qonda ngqo endaweni yesi-6 ngezansi.

  1. Khulula isikulufu sokulungisa esisekelweni seyunithi ukuze ukhulule Ikhava Yezintambo.
  2. Ubambe iyunithi ibheke phansi, cindezela ngokuqinile phakathi nendawo ye-wallplate, yihlukanise bese uyiphakamisa ukusuka kumojuli.
  3. Lungisa i-wall plate kanye netheminali block odongeni noma ebhokisini likakhonkolo, njengoba kudingeka. Qinisekisa ukuthi amakhanda esikulufu awaphumeleli ngale kobambo olumaphakathi olume mpo lwe-wallplate, noma lokhu kuzovimbela imojuli ukuthi ibekwe ngendlela efanele ku-wallplate.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (2)
  4. Amakhebuli angaphezulu angangena kuphela ngaphansi kweyunithi. Sika indawo yokuvula ikhebula efanelekile esembozweni sezintambo. Uma i-wall plate igxunyekwe ebhokisini likakhonkolo, izintambo zingangena zisuka ngemuva ngaphansi kwebhulokhi yetheminali.
  5. Ukuxhunywa kukagesi kwenziwa lula kusetshenziswa i-Wiring Centre. Nokho, uma lokhu kungasetshenziswa, ukuhlonza itheminali ye-wallplate kunjengoba kukhonjisiweI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (3)
    Uma isistimu elawulwayo ingu-230Vac khona-ke amatheminali 3 kanye no-L kufanele axhunywe ngekhebula elivalekile elikwazi ukuthwala umthwalo wamanje ogcwele. Nakuba iyunithi ingadingi uxhumano lomhlaba, itheminali inikezwa ku-wallplate ngezinjongo zokuqhubeka komhlaba.
  6. Ubhekisela emidwebeni yezintambo emakhasini 6-9, xhuma iyunithi njengoba kukhonjisiwe.
  7. Thola kumsebenzisi ukuthi iyunithi iyadingeka yini ukuthi isebenze ngemodi yezinsuku eziyi-7 (okusethiwe kusethwe yifekthri) noma kumodi yaphakathi neviki/ngempelasonto (usuku olu-5/2). Ukuze uguqulele kumodi yezinsuku ezi-5/2, khipha isixhumi esincane esinezinhlangothi ezimbili kumaphini uye kwesokunxele sekhefu ngemuva kwemojuli, bese ucindezela inkinobho ephawulwe R/S ngaphansi kwe-ap ukuze USETHE KABUSHA iyunithi.
  8. Qinisekisa ukuthi lonke uthuli nemfucumfucu kususiwe endaweni. Xhuma imojuli ku-wall plate ngokuyibeka ku-wall plate futhi, uma uyishayela ngayo, uyislayidele phansi. Qinisekisa ukuthi ihhuku engaphezulu kwe-wall plate isebenzisana nembobo engemuva kwemojuli.
  9. Ngaphambi kokusetha uhlelo, hlola iyunithi nesekhethi. Setha ukushintshwa kwe-rocker kokuthi WATER & HEATING. Cindezela inkinobho ethi KHETHA kuze kube yilapho ibha kusibonisi ihambisana negama elithi VULIWE. Lungisa ama-thermostat akude ukuze uhlole ukuthi isistimu isebenza kahle.
  10. Bese ucindezela inkinobho ethi KHETHA kuze kube yilapho ibha ihambisana negama elithi VALIWE futhi uhlole ukuthi uhlelo alusebenzi.
  11. Setha iswishi ye-rocker ibe AMANZI KUPHELA. Cindezela inkinobho ethi KHETHA kuze kube yilapho ibha kusibonisi ihambisana negama elithi IVULIWE, futhi uhlole ukuthi isiyingi samanzi sisebenza kuphela.
  12. Lapho ukuhlola kwesifunda sekuqediwe, buyisela isembozo sezintambo bese uqinisa isikulufu sokulungisa. Sika noma yikuphi ukuvuleka kwekhebula kukhava yezintambo okungase kudingeke ukuze kufakwe izintambo ezibekwe phezulu.
  13. Okokugcina, beka isikhathi sosuku nezinhlelo ezidingekayo, uphawule ukuthi iyunithi ihlinzekwa ngohlelo olusethiwe, njengoba kushiwo.

IzintamboI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (4)

I-DHW Ye-Gravity Evamile Enokushisisa OkuphuphuthekayoI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (5)

Igesi evamile yasekhaya noma isistimu yokushisisa emaphakathi esetshenziswa uwoyela enamanzi ashisayo adonsela phansi kanye nokushisa okumpontshwayo. (Uma i-thermostat yegumbi ingasetshenziswa, iphampu yocingo iphila ngokuqondile kutheminali 2 ye-102E7).

Isistimu yokulawula Ukushisisa kanye Namanzi Ashisayo kusetshenziswa ivalvu yendawo emaphakathi nembobo engu-3I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (6)

Isistimu yokulawula engenhla iyatholakala njengephakethe le-Danfoss Randall 102E7 HEATSHARE, elihlanganisa ne-thermostat yegumbi le-RMT, i-AT cylinder thermostat, i-HS3 ye-middle-position valve kanye nebhokisi lezintambo le-WB12.

Isistimu yokulawula Ukushisisa kanye Namanzi Ashisayo isebenzisa ama-valve ezindawo ezimbobo ezimbiliI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (7)

Isistimu yokulawula engenhla iyatholakala njengephakethe le-Danfoss Randall 102E7 HEATPLAN, elihlanganisa ne-thermostat yegumbi le-RMT, i-AT cylinder thermostat, amavalvu amabili e-22mm HPP zone kanye nebhokisi lezintambo le-WB12.

UkushintshwaI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (8) I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (9)

Imiyalo yomsebenzisi

Umhleli wakho

I-102E7 mini-programmer yakho ikuvumela ukuthi ushintshe ukushisisa kwakho namanzi ashisayo uvule futhi uvale ngezikhathi ezivumelana nawe. I-102E7 inganikeza izikhathi ezingu-3 ON kanye nezikhathi ezingu-3 OFF usuku ngalunye futhi inganikeza ukulawula kwezinsuku ezingu-7 (uhlelo oluhlukile losuku ngalunye lweviki) noma ukulawula kwezinsuku ezingu-5/2 (isethi eyodwa yezinhlelo phakathi neviki kanye nesethi ehlukile yezimpelasonto).

Ngaphambi kokuthi uqale/Ukwenza Ukusetha Kabusha Okugcwele

  • Vula i-flap ngaphambili kweyunithi.
  • Cindezela futhi ubambe izinkinobho +1HR kanye ne-MAN.
  • Cindezela futhi uyeke inkinobho ye-R/S usebenzisa into encane, engeyona eyensimbi (isb. uthi lukamentshisi, ithiphu le-biro).
  • Khipha izinkinobho ze-+1HR kanye ne-MAN.

I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (10)

Lokhu kuzosetha kabusha iyunithi, kubuyisele izinhlelo esethiwe bese kusetha isikhathi sibe ngu-12:00pm ngoMsombuluko.

Ukukhetha kwesibonisi samahora angama-24 noma se-AM/PM

Cindezela futhi ubambe izinkinobho USUKU nezinkinobho OKULANDELAYO UKUVULA/ OKUVAMILE amasekhondi angu-1.5 ukuze uguqule phakathi kwewashi lamahora angu-24 nesibonisi se-AM/PM, njengoba kudingeka.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (11)

Ukubeka isikhathi nosuku olulungile

Ukusetha Idethi

  • Cindezela futhi ubambe i-PROG imizuzwana emi-5 ukuze ubonise unyaka.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (12)
  • Sebenzisa izinkinobho ezithi + noma – ukuze usethe unyaka olungile.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (13)
  • Cindezela u-DAY ukuze ubonise usuku nenyanga. Sebenzisa izinkinobho ezithi + noma – ukuze usethe inyanga efanele (Jan=1, Feb=2 njll.).I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (14)
  • Cindezela u-DAY ukuze ubonise usuku nenyanga. Sebenzisa izinkinobho ezithi + noma – ukuze usethe usuku lwenyanga.
  • Cindezela okuthi PROG ukuze ubonise isikhathi.
  • Amagama athi SET TIME azovela phezulu kwesibonisi futhi isikhathi sizovuleka futhi sivale .I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (15)

Sebenzisa izinkinobho ezithi + noma - ukuze usethe isikhathi esifanele (cindezela bese ubamba ukuze ushintshe emizuzwini eyi-10).

Ukubeka Usuku

Usuku lweviki lusethwa ngokuzenzakalelayo. Cindezela okuthi PROG ukuze uphume kumodi ye-RUN.

Ama-Preset asezimboni

Iyunithi ihlinzekwa ngohlelo olulandelayo lokusethwa ngaphambilini oluzosebenza ngemva kokuba iyunithi isisethwe kabusha.

  Msombuluko-Lwesihlanu Sat-Ilanga
1st ON 6.30am 7.30am
1st OFF 8.30am 10.00am
2 ON 12.00pm 12.00pm
2nd OFF 12.00pm 12.00pm
3rd ON 5.00pm 5.00pm
3rd OFF 10.30pm 10.30pm

NB. 2nd ON kanye no-2nd OFF asethelwe ngesikhathi esifanayo. Lezi zikhathi ezi-2 azinakwa uhlelo ngakho-ke, ukushisa kuzovela kanye nje ekuseni nakanye kusihlwa. Uma ufuna ukushisisa ukuthi kungene phakathi nosuku setha i-2nd ON kanye ne-2nd OFF ibe izikhathi ozidingayo.

Ukwamukela izikhathi ezimisiwe

Uma ujabulile ukusebenzisa izilungiselelo ezingenhla, awudingi ukwenza enye into. Ukuze wamukele okusethiwe cindezela inkinobho ethi PROGRAM kuze kube yilapho ikholoni kusibonisi iqala ukukhanya. Iyunithi yakho manje ikumodi ye-RUN.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (16)

Ngaphambi kokuthi ushintshe izinhlelo esethiwe

Isifaki sakho sizobe sisethe iyunithi yakho ukuthi isebenze ngenye yalezi zindlela ezilandelayo:

  • Izinsuku eziyi-7 – izilungiselelo ezihlukene zosuku ngalunye lwesonto (ikhasi 16-17) – ukusetha okumisiwe
  • Usuku olu-5/2 - isethi eyodwa yezinhlelo phakathi nesonto nenye ngezimpelasonto. Sicela ulandele imiyalelo efanele ukuze uhlele iyunithi yakho.

Ngicela uqaphele

Iyunithi kufanele ihlelwe ngokulandelana, futhi izikhathi zokuVULA/UKUVALA azikwazi ukumiswa ngokulandelana. Uma ufuna ukushiya isikhathi esisethwe ngaphambilini sinjengoba sinjalo, vele ucindezele OKULANDELAYO VULIWE/KUVALIWE ukuze uqhubekele esimisweni esilandelayo Iwashi lakho lizokuvumela ukuthi uhlele izilungiselelo 3 KUKUVULIWA/UKUVALE ngosuku. Uma ungafisi ukusebenzisa enye yezilungiselelo zokuthi VULA/UKUVAMILE, vele uhlele ISIKHATHI SOKUVULIWE ukuze sifane nesikhathi SOKUVAMILE futhi ukulungiselelwa ngeke kusebenze.

Uma noma ngasiphi isikhathi udideka futhi udinga ukusetha kabusha izikhathi zakho ohlelweni olujwayelekile lokusetha ngaphambilini, cindezela inkinobho ethi R/S ukuze ubuyele ezinhlelweni ezisethiwe.

Ukuhlela ukushisisa namanzi ashisayo ngemodi yezinsuku eziyi-7

  1. Cindezela u-PROGRAM kuze kuvele okuthi SET ON TIME phezulu kwesibonisi bese ucindezela u-DAY kuze kuvele i-MO ngaphansi kwesibonisi. Sebenzisa izinkinobho ezithi + kanye - ukuze usethe isikhathi ofuna ukushisisa kwakho kuqale ngaso ekuseni (Umcimbi 1).I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (17)I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (18)
  2. Cindezela okuthi NEXT ON/OFF ukuze uye Emcimbini 2. Cindezela okuthi KOPISHA ukuze usebenzise izilungiselelo ezifanayo nosuku lwangaphambilini noma uqhubeke nokuhlela izikhathi zokushisisa IVULIWE noma VALIWE, usebenzisa izinkinobho ezithi + kanye – ukuze usethe isikhathi osifunayo bese ucindezela inkinobho OKULANDELAYO UKUVULA/UKUVALA ukuze uye esimisweni esilandelayo.
  3. Cindezela inkinobho ethi DAY kanye kuphela. I-TU izovela ngezansi kwesibonisi.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (19)I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (20)

Qhubeka nokuhlela isonto lonke ngokucindezela:

  • a) Inkinobho OKULANDELAYO UKUVULA/KUVALIWE ukuze uye esimisweni esilandelayo,
  • b) + kanye – nezinkinobho zokuchibiyela isikhathiI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (21)
  • c) USUKU lokudlulela osukwini olulandelayo. Okunye cindezela okuthi COPY ukuze ugcine izilungiselelo ezifanayo njengayizolo
    Cindezela inkinobho ethi PROGRAM ukuze ubuyisele iyunithi kumodi ye-RUN
    QhubekaI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (22)

Ukuhlela iyunithi - Imodi yezinsuku eziyi-5/2

Ukuhlela ukushisisa namanzi ashisayo ngemodi yezinsuku ezi-5/2

  1. Cindezela okuthi PROG kuze kuvele okuthi SET ON TIME phezulu kwesibonisi bese ucindezela DAY kuze kuvele i-MOTUWETHFR ngaphansi kwesibonisi. Sebenzisa izinkinobho ezithi + kanye - ukuze usethe isikhathi ongathanda ukuthi ukushisisa kwakho/amanzi ashisayo aqale avele ekuseni (Umcimbi 1).
  2. Cindezela okuthi NEXT ON/OFF kanye kuphela. Sebenzisa izinkinobho ezithi + kanye - ukuze usethe isikhathi ofuna ukushisisa/amanzi ashisayo acime ngaso (Umcimbi 2). Ukuze uye esimisweni esilandelayo, okungukuthi kunini lapho ungathanda ukuthi ukushisisa/amanzi ashisayo aphinde avuleke (Umcimbi 3) ​​cindezela inkinobho OKULANDELAYO UKUVULA/UKUVALA futhi.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (23)
  3. Qhubeka nokuhlela izikhathi zokushisisa/amanzi ashisayo UKUVAKA KANYE NEZIKHATHI ZOKUVALA emicimbini yaphakathi neviki 4, 5 & 6 njengasesinyathelweni sesi-2.
  4. Cindezela inkinobho ethi DAY kanye bese i-SASU izovela ngezansi kwesibonisi.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (24)
    Cindezela okuthi COPY ukuze ugcine izilungiselelo ezifanayo zangoMgqibelo nangeSonto njengoba uzihlele kusukela ngoMsombuluko kuya kuLwesihlanu. Ngaphandle kwalokho, hlela izikhathi ezintsha zokuVULA/UKUVALA ngokucindezela inkinobho OKULANDELAYO UKUVULA/UKUVALA ukuze uye esimisweni esilandelayo futhi usebenzise izinkinobho ezithi + kanye no- ukuze usethe isikhathi osifunayo.
  5. Cindezela inkinobho ethi PROG ukuze ubuyisele iyunithi kumodi ye-RUN
  6. QhubekaI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (24) I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (25) I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (26)

Iqalisa uhlelo lwakho

I-102E7 izolawula amanzi akho ashisayo kanye nokushisisa ndawonye, ​​noma amanzi akho ashisayo nje (okungukuthi ehlobo, lapho ukushisisa kungasadingeki).
Ukuze ukhethe sebenzisa inkinobho ye-rocker ngaphansi kwesibonisi se-LCD ukuze ukhethe AMANZI/UKUSHISA noma AMANZI KUPHELAI-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (33)

Ukuze uqalise uhlelo lokushisisa kanye/noma lwamanzi ashisayo cindezela inkinobho ethi KHETHA.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (34)

Njengoba ucindezela okuthi KHETHA ibha kusibonisi izohamba phakathi kokuthi KUVULIWE, KUVALWE, ALLDAY kanye NO-AUTO

  • VULIWE = amanzi ashisayo/ukushisisa kuzohlala kuvuliwe
  • VALIWE = amanzi ashisayo/ukushisisa ngeke kungene
  • NGOKUZENZAKALELAYO = amanzi ashisayo/ukushisisa kuzovela futhi kuhambe ngokwezikhathi ezihleliwe
  • USUKU LONKE = iyunithi izongena ngesikhathi sokuqala esihlelwe IVULIWE futhi izohlala ivuliwe kuze kube okokugcina okuhleliwe KUVALIWE

Khetha inketho oyidingayo, kuye ngezimo zakho, isikhathi sonyaka, njll.

Ukukhishwa Kwesikhashana Kwabasebenzisi

Kwesinye isikhathi ungase udinge ukushintsha indlela osebenzisa ngayo ukushisisa kwakho okwesikhashana, okungukuthi ngenxa yesimo sezulu esibanda ngendlela engavamile. I-102E7 inokukhishwa okubili okulula okungakhethwa ngaphandle kokuphazamisa uhlelo olumisiwe.I-Danfoss-102E7-7 -Day-Electronic -Mini -Programmer-fig (35)

+1HOUR

  • Cindezela okuthi +1ihora kanye uma udinga elinye ihora lokusebenza (ilambu elibomvu lizokhanya) Uma uhlelo luvaliwe luzokhanya ihora. Uma isivele ivuliwe izongeza ihora elengeziwe ukuze isistimu ihlale ihora elingeziwe.
  • Ukuze ukhansele ukukhipha, cindezela u-+1 HOUR futhi (isibani esibomvu sizocisha). Uma kungenjalo, ukukhipha kuzozikhansela ngokwakho kumcimbi ohleliwe olandelayo.

INDODA

  • Cindezela inkinobho ethi MAN kanye ukuze ukhiphe uhlelo mathupha (kuphela ngenkathi iyunithi isethelwe ku-AUTO noma ALLDAY) (ilambu elibomvu lizokhanya) Uma isistimu ivuliwe izocisha. Uma ivaliwe izovela. Uhlelo olusethiwe luzoqala futhi ngesikhathi esilandelayo esihleliwe sokuVULA/UKUVALWA.
  • Ukuze ukhansele ukukhipha, cindezela MAN futhi (isibani esibomvu sizocisha).

Isipele sebhethri

Esimeni sokunqanyulwa kwamandla, ibhethri eyakhelwe ngaphakathi izogcina isikhathi sakho nezilungiselelo zohlelo kufika ezinsukwini ezi-2. Ngemuva kwezinsuku ezi-2 ngaphandle kwamandla amakhulu idethi nesikhathi kuzolahleka. Lapho amandla amapayipi egesi ebuyiselwa, iyunithi kufanele ISETHWE KABUSHA, ngokucindezela inkinobho ethi R/S ngaphansi kwe-flap, kusetshenziswa into encane engeyona eyensimbi, okungukuthi uthi lukamentshisi noma ithiphu le-biro (bona ikhasi 12). Bese uhlela kabusha usuku nesikhathi.

Usenezinkinga?

  • Shayela unjiniyela wasendaweni yangakini:
  • Igama:
  • Ucingo:

Vakashela wethu webindawo: www.heating.danfoss.co.uk
Thumela i-imeyili emnyangweni wethu wezobuchwepheshe: ukheating.technical@danfoss.com
Shayela umnyango wethu wezobuchwepheshe ku-01234 364 621 (9:00-5:00 Mon-Thurs, 9:00-4:30 Fri)

Ukuze uthole inguqulo enkulu yokuphrinta yale miyalo, sicela uthinte i-Marketing

  • UMnyango wezezinkonzo ku-01234 364 621.
  • I-Danfoss Ltd
  • Ampthill Road
  • Bedford
  • MK42 9ER
  • Ucingo: 01234 364621
  • Ifeksi: 01234 219705

FAQ

  • Q: Ingabe le yunithi ingafakwa umuntu ongeyena uchwepheshe?
    • A: Cha, lo mkhiqizo kufanele ufakwe kuphela uchwepheshe kagesi oqeqeshiwe noma isifaki sokushisisa.
  • Q: Ngishintsha kanjani ukusuka kumodi yezinsuku eziyi-7 ukuya kumodi yezinsuku ezi-5/2?
    • A: Khipha isixhumi esinezindlela ezimbili bese ucindezela inkinobho ethi RESET ukuze ushintshe amamodi.

Amadokhumenti / Izinsiza

I-Danfoss 102E7 I-7 Day Electronic Mini Programmer [pdf] Umhlahlandlela Womsebenzisi
102E7 7 Day Electronic Mini Programmer, 102E7, 7 Day Electronic Mini Programmer, Electronic Mini Programmer, Mini Programmer

Izithenjwa

Shiya amazwana

Ikheli lakho le-imeyili ngeke lishicilelwe. Izinkambu ezidingekayo zimakiwe *