coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Ukucushwa Kwenethiwekhi

1. Amandla emkhiqizweni
   • Align the opener to the slot
   • Phendukisa ikhava yebhethri ngokuphambene newashi ukuze uvule
   • Remove the battery insulation film to power
2. Cindezela inkinobho ethi RESET ukuze uthole ama-3s bese uyakhulula, i-LED ebomvu izokhanya ukuze kucushwe inethiwekhi.

Imiyalelo yokufaka

Indawo yokufaka
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Sicela ufunde imanuwali ngokucophelela futhi usebenzise umkhiqizo ngendlela efanele
Siyabonga ngokuthengaasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Incazelo yomkhiqizo

Amathiphu:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Amapharamitha womkhiqizo

• Product Name Zigbee Ambient Light Sensor
• I-Wireless Protocol Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm