I-Coolmay L01S Series Isilawuli Esihlelekayo

Siyabonga ngokuthenga uchungechunge lwe-Coolmay LOl S PLC. Leli bhukwana lichaza ikakhulukazi izici zomkhiqizo, ukucaciswa okujwayelekile, nezindlela zokufaka izintambo zalolu chungechunge lwama-PLC. Ukuze uthole ukuhlela okuningiliziwe, sicela ubheke incwajana yokuhlela yochungechunge lwe-Cool may LOl S. Ukucaciswa okwengeziwe kungenziwa ngezifiso ngobuningi.
Uchungechunge lwe-LOl S PLC lunezici ezilandelayo:

1. Isebenzisa amaphrosesa akabili ebanga lezempi le-32-bit CPU + ASIC, isekela ukuqapha nokulanda ku-inthanethi, futhi isivinini sokwenza esisheshayo semiyalelo eyisisekelo ngu-0.24us. Umthamo wohlelo ungafinyelela izinyathelo ezingama-30k. Irejista yedatha eyakhelwe ngaphakathi eyi-12k.
2. Okukhiphayo kwe-Transistor high-speed pulse okukhipha i-4-eksisi YO~Y3 kungafinyelela ku-200KHz. Sekela amasethi angu-4 wezingxenye ezimbili zezingxenyekazi zekhompiyutha zokubala ezinesivinini esikhulu esingu-200KHz.
3. Iza ne-1 RS232 kanye ne-2 RS485, womabili asekela i-mod bus RTU/ASCII, ichweba lamahhala nezinye izivumelwano.
4. Sekela iziphazamiso eziningi, iziphazamiso zokufakwayo (unqenqema olukhuphukayo, unqenqema oluwayo), ukuphazamisa isibali sikhathi, iziphazamiso zokuxhumana, iziphazamiso zokubala ezinesivinini esikhulu kanye nokuphazamiseka kokuphuma kwe-pulse yesivinini esikhulu. Phakathi kwazo, ukuphazamisa okokufaka kwangaphandle kusekela okokufaka kokuphazamisa okungu-16.
5. Amaphuzu aphezulu angu-1/0 angasekela amaphuzu edijithali angu-168 (amaphoyinti angu-40 womsingathi + amaphoyinti angu-128 ukuze anwetshwe).
6. Izilimi zokuhlela ezingase zisekelwe yilezi: imiyalelo, imidwebo yesitebhisi (LD), kanye nemidwebo yesitebhisi (SFC).
7. Ukubethela okukhethekile kungenzeka. Ukusetha iphasiwedi ku-12345678 kungakwenqabela ngokuphelele ukufundwa kohlelo. [Qaphela: Kusekelwa kuphela iphasiwedi engu-8-bit]
8. Amatheminali angama-5.0MM axhumekeka kalula asetshenziselwa izintambo ezilula; I-DIN rails (35mm ububanzi) kanye nezimbobo zokulungisa zingasetshenziselwa ukufakwa.

Ulwazi Lomkhiqizo

1. Uchungechunge lomkhiqizo wenkampani LOIS: LOIS uchungechunge PLC
2. Amaphuzu okokufaka/okukhiphayo 16:8DA 8 DO 24:14 DAlO DO 34:18 DA16DO 40:24 DA16 DO
3. Ukuhlukaniswa kwemojuli M: Imojuli eyinhloko yesilawuli
4. Shintsha uhlobo lokuphumayo R: uhlobo lokuphuma kwe-relay; T: Uhlobo lokuphuma kwe-Transistor; I-RT: Ukukhishwa kwe-Hybrid ye-transistor edluliselwe
5. Inombolo enkulu yamaphoyinti wokufaka we-analog ngu-4, angakhethwa
6. Inombolo enkulu yamaphoyinti okukhiphayo we-analog ngu-2, angakhethwa
7. Uhlobo lokufakwayo lwe-analogi E: Uhlobo lwe-E-thermocouple (uhlobo lwe-K/T-uhlobo/S-uhlobo/J-uhlobo olwenziwe ngokwezifiso, lusekela izinga lokushisa elinegethivu) PT: PTlOO PTlOOO: PTlOOO
   I-NTC: I-Thermistor (10K/50K/100K) AO: 0-20mA i-A4 yamanje: 4-20mA yamanje
   V: 0-lOV ivolumutage V: -10 ~ lOV ivolumutage
8. Uhlobo lokuphumayo lwe-analog AO: 0-20mA i-A4 yamanje: 4-20mA yamanje V: 0-lOV ivolumutage V: -10 ~ lOV ivolumutage
9. Ukuze uthole amanye amapharamitha, sicela ubheke Ithebula 1: Amapharamitha Ayisisekelo

Imingcele eyisisekelo

Ithebula 1: Amapharamitha ayisisekelo

Ithebula 2: Amapharamitha kagesi

Ezogesi imingcele
Okokufaka ivoltage	I	AC 220V
		Idijithali okokufaka izinkomba
Indlela yokuzihlukanisa		I-Optoelectronic ukuhlanganisa
I-impedance yokokufaka		Phezulu okokufaka kwesivinini 2.4K 0                Okuvamile okokufaka 3.3k 0

(Iqhubeka kusukela kuthebula elingenhla)

Mechanical Design Reference

Ukufakwa nobukhulu bangaphandle
I-L01S-16M/24M

Umfanekiso 1 Umdwebo wobukhulu bokufaka

Ireferensi yokuklama kagesi

Ukwakheka Komkhiqizo

Umfanekiso 2 Ukwakheka Komkhiqizo

1. Izimbobo zokufaka
2. Ibhulokhi yokugcina amandla e-DC24V yokuphuma kwamandla
3. Ibhulokhi yetheminali ephumayo yedijithali
4. Ukushintsha okokufaka kwesibonisi se-LED
5. Ishintsha okukhiphayo ukubonisa i-LED
6. I-PWR: ikhombisa amandla esimeni
   RUN: I-PLC ikhanyisa ngesikhathi sokusebenza
   IPHUTHA: Isibani senkomba sizokhanya
   uma kunephutha lohlelo
7. RS485/RS232
8. RS485
9. Imbobo yokuhlela ye-PLC RS232
10. Ukulungiswa kwamabhande
11. RUN/STOP PLC operation switch
12. I-DIN ujantshi (35mm ububanzi) i-groove ekhwezayo
13. Ishintsha ibhulokhi yetheminali yokufaka
14. Imbobo yokuhlela ye-PLC Type-C
15. Ibhulokhi yetheminali yokufaka amandla ye-AC220V

I-Hardware interface
OV 24V S/S XOO~X07 GND ADO ADl GND AD2 AD3
LN FG CO YOO YOl Cl Y02 Y03 C2 Y04 VOS C3 Y6 Y7 GND DAO

L01S-16MT/16MRT-4AD1DA
I-OV 24V S/S XOO~X07 XlO~XlS
LN FG CO YOO YOl Cl Y02 Y03 C2 Y04 VOS C3 Y6 Y7 YlO Yll

I-L01S-24MT/24MRT
OV 24V S/S XOO~X07 XlO~Xl 7 X20 X21 GND ADO ADl GND AD2 AD3
LN FG CO YOO YOl Cl Y02 Y03 C2 Y04~Y07 C3 Y10~Y13 C4 Y14~Yl 7 GND DAO DAl

L01S-34MT/MRT-4AD2DA
I-OV 24V S/S XOO~X07 XlO~Xl 7 X20~X27
LN FG CO YOO~Y03. Cl Y04~Y07. C2 Y10~Y13. C3 Y14~Yl 7.

I-L01S-40MT/MR
Umfanekiso wesi-3 we-Hardware Interface Diagram

 Incazelo yephinikhodi ye-LOlS yochungechunge lwe-PLC

Phina inombolo	Isiginali	Chaza
4	I-RXD	Ukuxhumana
5	I-TXD	Thumela
8	GND	Ground ucingo

Umfanekiso we-4 PLC portming port
Ukucaciswa kwezintambo zetheminali: izintambo ezingama-22-14AWG. Amatheminali alolu chungechunge lwamamodeli wonke amatheminali axhumekayo

Umfanekiso 5 Imbobo Yezokuxhumana Engakhethwa

Incazelo yesixhumi esibonakalayo: 
Iza nezimbobo zokuhlela ezimbili: Imbobo yohlobo C (isivinini sokulanda esisheshayo) kanye ne-RS232 (isokhethi lekhanda legundane elinezimbobo ezingu-8)
Ngokuzenzakalelayo, kukhona ama-2 RS485, noma angenziwa ngezifiso njenge-1 RS485 kanye ne-1 RS232.

Incazelo yembobo yokuxhumana: 

• Imbobo ye-serial 1: RS232 (imbobo eyindilinga yamaphini angu-8): Isekela iphrothokholi yembobo yezinhlelo ze-Delta DVP, iphrothokholi yembobo yamahhala, kanye nephrothokholi ye-MODBUS RTU/ASCII;
• Imbobo ye-serial 2: I-RS485 (imbobo ye-Al Bl)/ongakukhetha i-RS232: Isekela iphrothokholi yechweba le-Delta DVP, iphrothokholi yembobo yamahhala, kanye nephrothokholi ye-Modbus RTU/ASCII
• Imbobo ye-serial 3: RS485 (A kanye ne-B): Isekela iphrothokholi yechweba le-Delta DVP, iphrothokholi yembobo yamahhala, kanye nephrothokholi yebhasi ye-Mod RTU/ASCII

* Uma i-PLC isebenza njengomsingathi, isekela iziyalezo ze-MOORD, iziyalezo ze-MOORD, neziyalezo ze-MODWR
Qaphela: Ukuze uthole izilungiselelo ezinemininingwane, sicela ubheke i-Cool may LOlS series PLC manualming manual

Isifunda esilinganayo

Izintambo zokufakwayo kwedijithali
Okokufaka kwe-PLC (X) kuyi-optocoupler ye-biphasic, futhi abasebenzisi bangakhetha phakathi kokuxhumeka kwe-NPN noma kwe-PNP uma beyisebenzisa. Kodwa-ke, sicela uqaphele ukuthi njengoba amatheminali avamile amaphoyinti okufaka exhunyiwe wonke, imojuli ngayinye noma umsingathi angaba nendlela eyodwa yokufaka izintambo futhi ayikwazi ukuxutshwa.
Amatheminali angu-24V kanye ne-OV asenawo amandla angaphakathi, angasetshenziswa ngokuqondile njengokufakwayo kwe-pointX.

Umfanekiso 6 we-lnputWiring Diagram (Okuthintana naye ngesivinini esiphezulu kukhonjiswe esithombeni esingenhla, ukuthintana okuvamile okuboniswe esithombeni esilandelayo)

PLC Digital NPNinputwiring:
Isifunda esifushane sembobo: I-S/S yetheminali yokufaka ye-PLC ixhunywe ku-24V, futhi itheminali ye-theX ixhunywe ku-OV yokuphakela amandla, okubonisa ukuthi kukhona okokufaka kwesignali;
Isistimu yezintambo ezimbili (i-switch magnetic): Okokufaka kokushintsha kwe-PLC kuxhunywe emshinini ozibuthe onezintambo ezimbili, ngesigxobo esihle sokushintsha kazibuthe esixhunywe ku-X terminal kanye nesigxobo esinegethivu esixhunywe ku-OV;
Isistimu yezintambo ezintathu (inzwa yesithombe kagesi noma isifaki khodi): Iswishi ye-PLC ixhunywe kunzwa yezithombe zikagesi noma isishumeki sesistimu yezintambo ezintathu. Ukunikezwa kwamandla kwenzwa noma i-encoder ixhunywe esigxotsheni esihle sokunikezwa kwamandla, futhi umugqa wesignali uxhunywe ku-terminal X; Izifaki khodi nezinzwa zikagesi wezithombe zidinga uhlobo lwe-NPN.

PLC Digital PNP okokufaka izintambo:
Isifunda esifushane sembobo: I-S/S yetheminali yokufaka ye-PLC ixhunywe ku-OV, futhi itheminali ye-theX ixhunywe kugesi we-24V, okubonisa ukuthi kukhona okokufaka kwesignali;
Isistimu yezintambo ezimbili (iswishi yokulawula kazibuthe): Okokufaka kokushintsha kwe-PLC kuxhunywe emshinini wokulawula uzibuthe onezintambo ezimbili, ngesigxobo esinegethivu somshini wokulawula kazibuthe oxhunywe ku-X terminal kanye nesigxobo esihle esixhunywe ku-24V;
Isistimu yezintambo ezintathu (inzwa yesithombe kagesi noma isifaki khodi): Iswishi ye-PLC ixhunywe kunzwa yezithombe zikagesi noma isishumeki sesistimu yezintambo ezintathu. Ukunikezwa kwamandla kwenzwa noma i-encoder ixhunywe esigxotsheni esihle sokunikezwa kwamandla, futhi umugqa wesignali uxhunywe ku-terminal X; Isifaki khodi nenzwa yezithombe zikagesi zidinga uhlobo lwe-PNP.

Izintambo eziphumayo zedijithali
Umfanekiso wesi-7 ubonisa umdwebo wesekethe olinganayo wemojula yokukhipha i-relay, enamaqembu amaningana amatheminali okukhiphayo ahlukaniswe ngogesi. Oxhumana nabo abaphumayo bamaqembu ahlukene baxhunywe kumasekhethi wamandla ahlukene.
Umjikelezo olinganayo wengxenye ephumayo ye-PLC enohlobo lokuphumayo kwe-transistor oluboniswe kuMfanekiso 8. Njengoba kungabonakala futhi emfanekisweni, amatheminali okukhiphayo ahlukaniswe ngamaqembu amaningana, futhi iqembu ngalinye lihlukaniswe ngogesi. Ukukhishwa kwamaqembu ahlukene kungaxhunywa kumasekhethi wamandla ahlukene; Okuphumayo kwe-transistor kungasetshenziswa kuphela kumasekhethi wokulayisha we-DC 24V. Indlela yokukhipha izintambo yi-NPN, i-COM cathode evamile.

Ngemithwalo ye-inductive exhunywe kumasekhethi e-AC, isekethe yangaphandle kufanele icabangele ivolthi esheshayo ye-RCtagisifunda sokumuncwa; Ngokuhambisana nomthwalo wesekethe ye-DC, kufanele kucatshangelwe ukwengeza i-freewheeling diode, njengoba kukhonjisiwe kuMfanekiso 9.

* Qaphela: Wonke amasekhethi angaphakathi aboniswe kumdwebo awereferensi kuphela
Izintambo zesitebhisi noma ze-servo motor ziboniswa kuMfanekiso 10. I-LOlS series transistor output PLC ishintsha ngokuzenzakalelayo ibe yi-YO-Y3 njengamaphoyinti e-pulse, futhi isiqondiso singenziwa ngendlela oyifisayo.Njengoba kuboniswe kuMfanekiso 10. Qaphela: I-A2K O resistor kufanele ixhunywe kuchungechunge nge-DC24V yedrayivu ye-SV.

Izintambo ze-analog
Uchungechunge lwe-L01-16M/34M lungakhethwa ngokufaka okuphezulu kwe-analog kwe-ADO-AD3, imiphumela ye-analog ye-DAO ne-DAL, kanye namatheminali anegethivu axhunywe ku-GND yamatheminali okokufaka/okukhiphayo kwe-analog.
Isistimu yezintambo ezimbili: isigxobo esihle sokuphakelwa kwamandla sixhunywe esigxotsheni esihle sesithumeli, isigxobo esinegethivu sesidlulisi sixhunywe kutheminali ye-AD, kanti isigxobo esinegethivu sikagesi sixhunywe kutheminali ye-GND. Ngokuvamile, indlela yokufaka izintambo yama-4-20mA/0-20mA transmitters isetshenziswa;
Uhlelo lwezintambo ezintathu: isigxobo esihle sokuphakelwa kwamandla sixhunywe esigxotsheni esihle se-transmitter, isigxobo esingalungile sokunikezwa kwamandla kanye nesigxobo esingalungile sokukhishwa kwesignali yi-terminal efanayo, futhi ukuphuma kwesignali yesidluliseli kuxhunywe ku-terminal ye-AD;
Isistimu yezintambo ezine: Izigxobo ezinhle nezingezinhle zokunikezwa kwamandla zixhunywe kuzigxobo ezinhle nezingezinhle zesithumeli, ngokulandelana. Izigxobo ezinhle nezingezinhle zokukhishwa kwesiginali yokudlulisela zixhunywe kutheminali ye-AD kanye netheminali ye-GND, ngokulandelana; Inani le-analog lokushisa lixhunywe kutheminali ye-AD kanye netheminali ye-GND ngokuhlukana. Uma kuyi-PTlOO yezintambo ezintathu, idinga ukuhlanganiswa ibe izintambo ezimbili bese ixhunywa.

I-PLC anti-interference processing

1. Ugesi onamandla nobuthakathaka kufanele ufakwe izintambo ngokwehlukana futhi awukwazi ukuxhunywa ndawonye; Uma kukhona ukuphazamiseka okunamandla kagesi, engeza indandatho kazibuthe ekugcineni kokunikezwa kwamandla; Futhi wenze ukwelashwa okuyisisekelo okulungile nokusebenzayo ngokusho kohlobo lwe-casing.
2. Uma isignali ye-analog iphazamiseka, i-ceramic capacitor engu-104 ingangezwa ukuze ihlungwe futhi ibekwe phansi ngendlela efanele nangempumelelo.

Qaphela: Ukuze uthole imininingwane eyengeziwe, sicela ubheke “indlela yokucubungula i-PLC yokulwa nokuphazamiseka” esisemthethweni webindawo ka Cool may

Ireferensi yokuhlela

• Irejista yokufaka ye-analogi (i-AD imele okokufaka kwe-analog) ngokunemba kwamabhithi ayi-12 isekela ukufundwa okuqondile kwamarejista:

D [lllO]~D [1113] amanani okokufaka ahambisana namanani e-analog [ADO~AD3], iswishi sesiteshi esingu-D1114;
Qaphela: Uma okokufaka kwe-analog kunohlobo lwe-thermocouple, kungasetshenziswa umkhawulo wamashaneli angu-3, ​​lapho i-AD3 [D1113] iyizinga lokushisa elizungezile le-thermocouple.
Uma lungekho uhlobo lwe-thermocouple, iziteshi ezi-4 zingasetshenziswa.

Cha.	Bhalisa inani lokufunda	Irejista yokushintsha isiteshi
I-ADO	D1110	Iqala lapho D1114-0~D114.3=1
I-ADl AD2	D1111 D1112
AD3	D1113

Sampukufakwa kwe-analog
I-D1377 inombolo ye-sampizikhathi zokukhuluma: ibanga 0-7, okuzenzakalelayo= 7; Ngemva kokulungiswa, qala kabusha ukuze kusebenze. Uma i-Dl377=1, umjikelezo wokuskena we-PLC owodwa sampkancane kanye futhi iguqule inani kokokufaka kwe-analog kanye. I-DllS inombolo yemijikelezo yokuhlunga: ububanzi 0-32767.

• Irejista yokuphuma kwe-analogi (i-DA imele okukhiphayo kwe-analog, ngokunemba kwamabhithi ayi-12); Sekela umsebenzi wokunikezwa kwerejista ngqo

Ububanzi bamanani okusetha buboniswa kuthebula elilandelayo:

Cha.	Bhalisa ikheli	Setha ububanzi benani	Umfanekiso
I-DAO	D1116	0-4000	Bhala inani lokuphuma kokuguqulwa okuzenzakalelayo
DAL	D1117	0-4000

Ukwabiwa kwengxenye yesofthiwe nemiyalelo yokulungisa ukucisha amandla

Inani eliphakeme lamaphoyinti okushintsha		I-L01S-16M	I-L01S-24M	I-L01S-32M	I-L01S-40M
Ukushintsha okokufaka X		XOO-X07 Bpoints	I-XOO-XlS 14points	XOO~Xl7 24points	XOO~X27 24points
Shintshanisa amasheya Y		YOO-Y07 Bpoints	I-YOO-Yll lOpoints	YOO~Yl 7 16points	YOO~Yl 7 16points
I-Axiliary Relay M		[MO-M499] 500 amaphuzu okusetshenziswa okuvamile (angashintshwa ukuze kugcinwe amandla outage)/[M500-M991, M2000-M4095] 25 86 amaphuzu okulungisa [M1000-Ml999] 1000 amaphuzu ukusetshenziswa okukhethekile
Amazwe		[50-59] yesimo sokuqala kumaphuzu ayi-10/1510-519] yokwehla kwemvelaphi kumaphoyinti ayi-10/[520-5127] ukuze kugcinwe 108 amaphuzu/[5128-5899] ukusetshenziswa okuvamile kumaphoyinti angu-771
IsikhathiT		[TO-Tl99] 200 o'clock lOOms ukusetshenziswa okuvamile/[T250-T255] 6 o'clock lOOms ukugcinwa ukusetshenziswa; [T246-T249] 4 o'clock lms cumulative hold time/[T256-T319) Ngokuvamile isetshenziselwa lms at 64o'clock; [T200-T239) Ijwayele ukusetshenziselwa !Oms at40 o'clock/ [T240-T245] Bambela!Oms ngo-6pm
Ikhawunta C		16 bit incremental counter [CO-C99] 100 amaphuzu avame ukusetshenziswa/[Cl00-Cl99] 100points agciniwe
		32-bit ukukhuphuka/ukwehla counter [C200-C219] 20 amaphuzu ngokuvamile asetshenziswa/[C220-C234] 15 amaphuzu agciniwe
		Ikhawunta yejubane eliphezulu [i-C235-C245 yokubala okukodwa kwesigaba esisodwa] [C246-C250 ukubala okuphindwe kabili kwesigaba esisodwa] [C251-C255 ukubala okuphindwe kabili kwezigaba ezimbili]
Irejista yedatha D		(DO-D199) 200 amaphuzu okusetshenziswa okuvamile/[D200-D999), [D2000-D11999] 10800 amaphuzu ukusetshenziswa ukulungiswa/ [D1000~D1999] 1000 amaphuzu ukusetshenziswa okukhethekile/[D8000~D8511] 512 amaphuzu ukusetshenziswa okukhethekile
Amarejista edatha E, F		[EO-E 7] [FO-F7] Isetshenziselwa ukukhomba amaphuzu angu-16
Isetshenziselwa amagatsha e-JUMP kanye ne-CALL anezikhombisi		[PO-P255] 256points
Ukwenza isidleke		[NO-N7] Isetshenziselwa ukulawula okuyinhloko kwamaphoyinti angu-8
Phakamisa Njalo	K	[10 • 0~17 0 0]ukuphazamisa okokufaka kwamaphoyinti angu-8/[16 [ [~18 • ] ukuphazamiseka kwesibali sikhathi samaphoyinti angu-3/[110 • [~170 •J [] ukuphazamiseka kwesibali samaphoyinti angu-7
		16bit -32, 768-32,76 7		32bit -2,147,483,648-2,147,483,647
	H	I-16bit 0-FFFFH		I-32bit 0-FFFFFFFFH

Ukugcinwa kokucinywa kwamandla kwezingxenye zesofthiwe ye-LOlS PLC kungunaphakade, okusho ukuthi zonke izingxenye zesofthiwe endaweni yokugcinwa azilahleki ngemva kokuthi imojuli ivaliwe. Iwashi lesikhathi sangempela lisebenzisa amabhethri angashajwa ukuze ashintshwe kalula ngabasebenzisi. Wonke amandla okugcina imisebenzi kufanele aqinisekise ukuthi i-voltage-DC24V amandla kagesi anomthwalo angaphezulu kuka-23V, futhi i-PC inikwe amandla ngaphezu kwamaminithi angu-2, ngaphandle kwalokho umsebenzi wokucisha ugesi ongavamile ungase wenzeke.
Isoftware yokuhlela ehambisana nesoftware ye-CoolmayPLC ye-Vtool PRO Ukuze uthole imininingwane enemininingwane, bheka i-Cool may LOlS Series PLC Programming Manual.

AMACEBISO

Uchungechunge lwe-LOlS lwe-programmable controller (PLC) imanuwali yomsebenzisi
Ngaphambi kokusebenzisa lo mkhiqizo, sicela ufunde ngokucophelela imanuwali efanele futhi ulisebenzise ngaphansi kwezimo zemvelo ezishiwo encwadini yeziqondiso.

1. Sicela uqinisekise umthamo wamandla kagesitaguhla lwalo mkhiqizo (amandla omkhiqizo ojwayelekile we-AC220V!) kanye nezintambo ezilungile ngaphambi kokuvula amandla ukugwema ukulimala.
2. Uma ufaka lo mkhiqizo, sicela uqinisekise ukuthi uqinisa izikulufu noma i-clamp umzila wesitimela ukugwema ukuhlukaniswa.
3. Gwema ukufaka izintambo noma ukukhipha amapulaki ekhebula ngenkathi usesimweni esibukhoma, njengoba kungase kubangele ukushaqeka kukagesi noma umonakalo wokujikeleza; Uma umkhiqizo ukhipha iphunga noma umsindo ongajwayelekile, sicela ucishe iswishi yamandla ngokushesha; Lapho ucubungula izimbobo zesikulufu kanye nezintambo, ungavumeli ukushefa kwensimbi namakhanda ezintambo kuwele emigodini yokungenisa umoya yesilawuli, njengoba lokhu kungase kubangele ukungasebenzi kahle komkhiqizo kanye nokungasebenzi kahle.
4. Ungayibophi ndawonye intambo yamandla nekhebula lokuxhumana noma uzibeke eduze kakhulu. Gcina ibanga elingaphezu kuka-10cm; Imisinga enamandla futhi ebuthakathaka idinga ukuhlukaniswa futhi isekelwe ngokufanele nangempumelelo; Ezimeni ezinokuphazamiseka okukhulu, izintambo ezivikelwe kufanele zisetshenziselwe ukuxhumana kanye nokokufaka kwesignali yefrikhwensi ephezulu kanye nokuphumayo ukuze kuthuthukiswe ukusebenza kokunqanda ukuphazamiseka. Itheminali ephansi ye-FG kulo mshini kufanele isekelwe kahle ukuze kuthuthukiswe ikhono lokulwa nokuphazamiseka.
5. Okokufaka kweswishi kuwuhlobo lokuvuza lwangaphandle lwe-DC24V (i-NPN engenzi lutho), futhi isignali yokufaka ihlukanisiwe ekunikezeni amandla. Uma uyisebenzisa, i-S/S idinga ukuxhunywa ku-24V positive yamandla angaphandle.
6. I-Cx yetheminali evamile ephumayo ye-switching transistor iyi-cathode evamile.
7. Sicela ungawuqedi umkhiqizo noma uguqule izintambo ngokuthanda kwakho. Uma kungenjalo, kungabangela ukungasebenzi kahle, ukungasebenzi kahle, ukulahlekelwa, nemililo.
8. Lapho ufaka futhi uqaqa imikhiqizo, sicela uqiniseke ukuthi unqamula yonke imithombo yamandla, ngaphandle kwalokho kuzodala ukungasebenzi kahle kwemishini nokungasebenzi kahle.

I-Shenzhen Cool may Technology Co., Ltd

• Ucingo: 0755-869504 16
  86960332
  2605 1858
  26400661
• Ifeksi: 0755-26400661-808
• QQ: 800053919
• I-imeyili: cm2@coolmay.net
• Web: en.coolmay.com

Amadokhumenti / Izinsiza

I-Coolmay L01S Series Isilawuli Esihlelekayo [pdf] Imaniwali yosebenzisayo I-L01S Series Isilawuli Esihlelekayo, Uchungechunge lwe-L01S, Isilawuli Esihlelekayo, Isilawuli

Izithenjwa

• Imaniwali yosebenzisayo