comcube 7530-US Co Controller 2 Ngenzwa Yangaphandle

Imininingwane:

• Imodeli: 7530-US, 7530-EU, 7530-UK, 7530-FR, 7530-AU
• Ukunikezwa kwamandla kagesi: AC100~240VAC
• I-Power Plug: Uhlobo lwepulagi ye-piggyback yase-USA (izinhlobo ze-EU&UK ziyatholakala)
• Ubude bekhebula: 4.5 amamitha
• Izici: Isilinganiso sezinga le-CO2, umsebenzi wokulawula wamadivayisi axhunyiwe

Imiyalo yokusetshenziswa komkhiqizo

Okubalulekile Kuhlinzekiwe:
Le phakheji iqukethe imitha (isilawuli+iyunithi yenzwa), imanuwali yokusebenza, ibhokisi lephepha, izikulufu, kanye netheyiphu.

Ukunikezwa kwamandla kagesi:
Imitha inikwa amandla yi-AC100~240VAC ngqo. Ipulaki yamandla iwuhlobo lwepulaki lase-USA le-piggyback ukuze lilawuleke kalula amadivayisi axhunyiwe.

Ukubekwa:

• Sebenzisa i-CO2 sensor yangaphandle ukuze ulinganise amazinga e-CO2 endaweni evaliwe. Nweba ikhebula ngamamitha angu-4.5 ukusuka kusibonisi ukuze ubekwe ngendlela evumelana nezimo. Gwema isifutho samanzi ukuze welule isikhathi sokuphila se-probe nemitha.
• Sebenzisa izikulufu ezinikeziwe nesitikha sodonga ukuze ukhweze i-sensing probe futhi ulawule imitha ngokuphephile endaweni oyifunayo.

Ukusebenza

Vula

1. Xhuma ipulaki yamandla kusokhethi esodongeni ukuze uvule isilawuli.
2. Idivayisi izobonisa isibonisi esigcwele ngebhiphu emfushane bese yenza ukubala wehla kwemizuzwana eyi-10 ukuze ifudumale.
3. Imitha izobonisa ulwazi lwe-firmware kanye nokuthi "Zifudumeze" esigabeni sokubonisa ishadi.

Vala amandla

1. Khipha ipulaki yamandla ukuze uvale imitha.
2. Uma ivuliwe futhi, imitha izogcina izilungiselelo ezifanayo kusukela ekusebenzeni kokugcina.
3. Isikhathi seshadi sizozenzakalela sibe usuku olungu-1 lapho kunikwa amandla kabusha.

ISINGENISO

Siyabonga ngokuthenga lesi silawuli se-COz mount. Uphenyo lwangaphandle lwe-CO2 lufakiwe ukukusiza ukukala izinga le-COz endaweni evaliwe. Lesi silawuli se-COz sinepulaki ye-piggyback yohlobo lwase-USA
ukuze uthole amandla e-AC kusuka esokhethi yamandla odongeni futhi futhi unikeze umsebenzi wokulawula kwamanye amadivaysi axhunyiwe, njengejeneretha ye-COz ne-ventilation fan. Ukuqinisekisa ukuphepha, sicela ufunde leli bhukwana ngokucophelela ngaphambi kokulifaka futhi ulandele imiyalelo. Gcina le manuwali endaweni evikelekile ukuze isetshenziswe esikhathini esizayo.

Izici

• Ukulinganisa okunembile nokuphansi kwe-NDIR CO
• Inzwa yangaphandle ye-COz izosetshenziswa endaweni evaliwe
• Bonisa inani le-COz lesikhathi sangempela
• Bonisa ishadi le-COz elinesilinganiso sesikhathi esilungisekayo (isonto/usuku/ihora/umzuzu/okuzenzakalelayo)
• I-Auto Max. /Min. Khumbula eshadini le-COz
• Inani lendawo ye-COz elihlelekayo kanye nenani lesikhungo se-COz ukuze ulawule amandla okukhiphayo avuliwe/avaliwe
• I-alamu ezwakalayo ixwayisa ukugxilisa ingqondo kwe-COz
• Inkomba yendawo eqondiwe eshadini le-COz
• Ukutholwa okuzenzakalelayo koSuku/Ubusuku ku-COz probe ukuze kweqe ukulawula kwe-COz
• Ukukhanya kwangemuva ukusiza ukusebenza endaweni emnyama
• Ukuqapha nokulawula inani le-COz ku-Green house, isakhiwo sokuhlala nesokuhweba

IZINTO EZINIKEZELWA

Le phakheji iqukethe:

• Imitha (isilawuli+inzwa)
• Imanuwali yokusebenza
• Ibhokisi lephepha
•  Izikulufu kanye ne-tape

UKUNIKEZWA KWAMANDLA KAGESI

Imitha inikwa amandla yi-AC100~240 VAC ngqo. Ipulaki yamandla iwuhlobo lwepulaki yase-USA piggyback ukuze ukwazi ukuxhuma idivayisi ofuna ukuyilawula.

Kumakhasimende okumele asebenzise ipulaki ye-EU noma yase-UK noma ye-FR noma ye-AU, ikhoyili kagesi nekhoyili ephumayo kuyahlukaniswa.

PLACEMENT

Uphenyo lwangaphandle lwe-CO2 lufakiwe ukukusiza ukukala izinga le-CO2 endaweni evaliwe, ikhebuli ingamamitha angu-4.5 ubude ukuze inwebe indawo yakho yokulinganisa ngamamitha angu-4.5 ukusuka ekubonisweni. Sicela wenze uphenyo kanye nemitha kude nesifutho samanzi ukuze welule isikhathi sokuphila. Izikulufu zihlinzekwa ngephakheji. Okokuqala usebenzisa isitikha sodonga esinikeziwe ukuze uthole indawo lapho ofuna ukulengisa khona i-sensing probe kanye imitha yokulawula ku-, bhora ukuze ulungise isikulufu nokulenga amadivayisi.

UKUPHEPHA FUSE
Imitha inikwa amandla yi-AC100~240 VAC ngokuqondile futhi inikeza amandla ngesokhethi ye-piggyback noma isokhethi yohlobo lwe-EU/UK/FR/AU ukushayela ijeneretha ye-CO2 noma umoya. Ukuze ugweme ukulimala ngokugcwala kwamandla, i-3KA@300VAC fuse ifakwa kumitha. Xhumana nomsabalalisi noma uthenge ukuze uthenge i-fuse entsha ngesikhathi kudingekile. Bheka isithasiselo ukuze uthole imininingwane.

KEYPAD&INkomba ye-LED

• Faka imodi yokusetha.
• Londoloza futhi uqedele izilungiselelo.
• Khetha imodi noma ukhuphule inani ekulinganisweni nasekusetheni.
• Shintsha isikali sesikhathi. Khetha imodi noma yehlisa inani ekulinganisweni nasekusetheni.
• Amandla: Okuluhlaza kuvuliwe ngenkathi kunikwe amandla
• Isikhathi sosuku: Ukukhanya okuluhlaza ngenkathi ukukhanya kutholiwe kungu->60 lux amasekhondi angu-10.
• Okukhiphayo: Ukukhanya okuluhlaza ngenkathi ukudluliselwa IVULIWE

I-LCD DISPLY

UKUSEBENZA

UKUVULA AMANDLA
Xhuma ipulaki yamandla kusokhethi esodongeni ukuze uvule isilawuli. Ngenkathi ukuxhuma kuphumelela, idivayisi izobonisa isibonisi esigcwele ngebhiphu emfushane bese yenza isekhondi elingu-10. ukubala phansi ukuze ufudumale futhi iphinde ibonise ulwazi lwe-firmware kanye nokuthi "Zifudumeze" esigabeni sokubonisa ishadi. Khipha ipulaki yamandla ukuze uvale imitha. Ngenkathi amandla emitha futhi, imitha izogcina ukulungiselelwa okufanayo kusukela ekusebenzeni kokugcina, ngaphandle kokuthi isikhathi seshadi sizohlala njengosuku olungu-1 ngenkathi sinikwa amandla kabusha.

UKUTHATHA ISILINGANISO
Imitha iqala ukuthatha isilinganiso ngemva kokukhanyisa futhi ibuyekeza ukufundwa njalo ngamasekhondi angu-5. Uma isicelo sakho singesokulawula kwe-green house, akukho ukusetha kokuqala okudingekayo. Esimeni sokushintshwa kwemvelo yokusebenza (isb. ukusuka phezulu ukuya kwezinga lokushisa eliphansi.), kuthatha amasekhondi angu-2 ukuphendula ngoshintsho lwe-CO30. Ungabambeli i-sensi probe eduze nobuso uma kwenzeka ukuthi umoya ophefumulayo uthinta i-CO2

Idivayisi ihlale ibonisa i-ambient CO2 yamanje, setha inani eliphakathi nendawo bese usetha inani lendawo.

Indawo Yeshadi Lethrendi
Ngezansi kunethebula elibonisa isikali sesikhathi esitholakalayo kanye nobude besigaba ngasinye sesilinganiso esihambelanayo:

Ukusebenzisa  ukuguqula isikali sesikhathi esitholakalayo. Uma ukhetha umjikelezo ozenzakalelayo , uzobona   ku-LCD kanye nesilinganiso sesikhathi sokushintshana njalo ngamasekhondi angama-20.

I-Time Span	Isikhathi esigabeni ngasinye
1 imiz	5isekhondi/div
Amahora angu-1	5 amaminithi/div
izinsuku ezingu-1	2 ihora/div
1 iviki	0.5 usuku/div
Umjikelezo ozenzakalelayo	Biyela ngenhla

• MAX/MIN weshadi elibonisiwe
  Ngakwesokudla seshadi elibonisiwe, kunezinkomba ezimbili zezinombolo:
  UMax noMin. Amanani aphezulu kanye nobuncane eshadini elibonisiwe. Ngenkathi ucindezela inkinobho ethi phansi ukuze uguqule isikali sesikhathi seshadi, lezi zibalo zibuyekezwa futhi.
• Bonisa Ukukhanya Kwasemuva
  Ngokucindezela noma yimuphi ukhiye kungavula ukukhanya kwangemuva imizuzwana engu-30 ukukusiza ukuthi usebenze endaweni emnyama.
• Thola Ngokuzenzakalelayo Usuku/Ubusuku
  Ekufakweni kwe-greenhouse, ukulawulwa kwe-CO2 akudingekile ngenkathi ukukhanya kubuthakathaka. Inzwa eyakhelwe ngaphakathi ye-Photo-Cell ku-CO2 sensing probe ingathola ngokuzenzakalelayo ukuthi uSuku (ngaphezu kuka-60 Lux) noma Ubusuku (ngaphansi kuka-20Lux). Ingakwazi ukweqa isilawuli se-CO2 futhi ivale ijeneretha ye-CO2 ngokuvala amandla okukhipha phakathi nobusuku. Ngokuphambene, uma i-Photo-Cell ithola ukukhanya (>60Lux) nezinga le-CO2 lihlala liphansi ngokuqhubekayo amasekhondi angu-30, idivayisi izoqala ijeneretha ye-CO2 ngokuvula amandla okukhiphayo. Umsebenzi wokuthola ngokuzenzakalela uSuku/Ubusuku awunakwa ngenkathi abasebenzisi bethatha imodi "Yomuntu" esilungiselelweni esithuthukisiwe. Ngokutholwa okuzenzakalelayo kushaywa indiva, isilawuli sokuphuma kwe-relay sinqunywa kuphela inani le-CO2, kuphela. Imini noma Ubusuku abunathonya kukho
• Ukulawula Okuphumayo
  Amandla okukhiphayo avuliwe uma inani le-CO2 liphansi Setha Isikhungo-(1/2) Setha indawo, futhi icishiwe lapho ukugxiliswa kwe-CO2 kungaphezu kwe-Set Center+(½) Setha indawo. Okwesiboneloample, uma I-Set Center ingu-1200ppm, futhi Indawo Yesethi ingu-400ppm, amandla okukhiphayo azocisha lapho i-CO2 ingaphezu kuka-1200+ (1/2)*(400)=1400pm, namandla avuliwe lapho i-CO2 ingaphansi kuka-1200-(½) *(400)= 1000ppm. Iphethini yokulawula okukhiphayo ngenhla iphambene ngenkathi abasebenzisi bethatha imodi ethi "Umuntu" esilungiselelweni esithuthukisiwe. Ungahlola usuka kusibonisi ukuze wazi isilungiselelo esikhona esomuntu noma Isitshalo . Kumodi Yomuntu, uma i-Set Center ingu-1200ppm, futhi i-Set zone ingu-400ppm,
  amandla okukhipha azovuleka uma i-CO2 ingaphezu kuka-1200+ (1/2)* (400)=1400ppm, futhi ivale lapho i-CO2 ingaphansi kuka-1200-(½)*(400)=1000ppm.
• Inkomba yendawo eqondiwe
  Kusuka eshadini elibonisiwe, abasebenzisi bangazi kalula ukuthi ukufundwa kwe-CO2 kwamanje kuyindawo eqondiwe elawulayo noma cha ngokuhlola ishadi. Indawo okuqondiswe kuyo ikhonjiswa ngezithonjana zikanxantathu. Okwesiboneloample, isithombe esingezansi sibonisa ubuningi. & Inani eliphansi lalesi sikali sesikhathi kumasekhondi angu-85 wokugcina ngu-626ppm no-542ppm futhi konke kukulawula indawo eqondiwe.

• I-alamu yeBuzzer
  Okuzenzakalelayo kwe-alamu ye-Buzzer njengokuthi IVALIWE (isithonjana  ). Ungaya kwimodi yokusetha ukuze uvule isithonjana se-alamu ye-buzzer ). Ngenkathi i-buzzer ivuliwe, iyakhala lapho inani le-CO2 lingaphezu kwendawo ye-Set Center+ Set, futhi ivaliwe lapho ukugxiliswa kwe-CO2 kungaphansi kwendawo ethi Setha Isikhungo+Setha. Okwesiboneloample, uma i-Set Center ingu-1200pm, futhi indawo ethi Setha ingu-400ppm, ibhiphu izoqala uma i-CO2 ingaphezu kuka-1200+400=1600ppm, futhi i-buzzer ivaliwe uma i-CO2 ingaphansi kuka-1600pm. Iphethini yokusebenza yebhaza ye-alamu ephezulu isetshenziswa kukho kokubili Imodi Yezitshalo & Yomuntu.

SETHA

• Bamba ukhiye ngaphansi kwemodi evamile ukuze ufake imodi yokusetha.
• Cindezela ukuze ukhethe umsebenzi wokusetha odingekayo bese ucindezela ku .
• Ukuphuma ekusetheni, cindezela ukhiye izikhathi ezine ize ibuyele kumodi evamile. “Isikhungo” “Indawo”, “Re-CALI”, “ADV” bese ubuyela kusibonisi esivamile kuwumjikelezo ophelele womsebenzi wokusetha.
• Kumodi yokusetha, uma kungekho khiye ocindezelwe phakathi neminithi elingu-1, idivayisi izobuyela ngokuzenzakalela esimeni esijwayelekile.
• Kumodi yokusetha, uma kungekho khiye ocindezelwe phakathi neminithi elingu-1, idivayisi izobuyela ngokuzenzakalela esimeni esijwayelekile.

ISikhungo

Uma ufaka imodi yokusetha, cindezela ukuze ufake “Phakathi” ukusetha inani. Inani elizenzakalelayo lingu-1200ppm lesitshalo esivamile. Cindezela or ukushintsha inani futhi 50ppm/step. Bese, cindezela u-ENTER futhi ukuze uqinisekise.

I-ZONE
Uma ufaka imodi yokusetha, cindezela ukuze ufake ukusethwa kwevelu ethi "Zone". Inani elizenzakalelayo lingu-400 ppm ngenjongo evamile. Cindezela or ukushintsha inani futhi 10ppm/step. Bese, cindezela futhi ukukuqinisekisa.

Qaphela: Isinqamuleli esisodwa sokuthi abasebenzisi babuyisele Isikhungo neZone ku-1200&400ppm : Ngemodi evamile, cindezela amasekhondi angu-3 kuze kube ibhiphu ezwakalayo futhi i-LCD kufanele ibonise "Emuva Ekhaya Kwenziwe"

RE-CALI
Nakuba ukunemba kwale divayisi kuwukukhathazeka, ungasebenzisa lo msebenzi ukuze ulinganise le divayisi ngomoya ongaphandle womoya osemkhathini osesimweni esingu-~400ppm. Kunconywa ukwenza ukulinganisa ngosuku olunelanga ukuze uqinisekise ukuthi umoya ohlanzekile uvalwe ku-400ppm. Shiya inzwa emoyeni omusha wangaphandle imizuzu engu-20 ngaphambi kokuthi ufune ukuqala ukulinganisa. Uma ufaka imodi yokusetha, cindezela ama-kevs ukuze ukhethe u-“Re-CALI”. bese ubamba amasekhondi angu-3 kuze kube ibhiphu futhi ishadi lizofunda "Ukulinganiswa". Shiya inzwa emoyeni omusha wangaphandle imizuzu engu-20 ukuze uqedele ukulinganiswa. Ukuze ubaleke, cindezela ukuqeda ngaphandle kokulondoloza. Qinisekisa ukuthi idivayisi ikude nomthombo we-CO2, hhayi elangeni eliqondile, futhi ayivezwa emanzini.

Qaphela:
Imitha ilinganiswa ekugxiliseni okujwayelekile okungu-400ppm CO2 efektri.

Ungayilinganisi imitha emoyeni ngezinga le-CO2 elingaziwa. Uma kungenjalo, izothathwa njenge-400ppm futhi iholele ezilinganisweni ezingalungile.

ADV(advance)

Umsebenzi wokugcina kumodi yokusetha ubizwa ngokuthi ukulungiselelwa kwangaphambili okukuvumela ukuthi wenze ngokwezifiso isilawuli sakho ngokuguquguquka okwengeziwe, futhi kuhlanganisa:

1. i-alamu ye-buzzer ivuliwe/ivaliwe,
2. Isinxephezelo se-CO2 sokuphakama (ingcindezi),
3. khetha edluliselwe okukhiphayo ukuze Human noma
4. Imodi yezitshalo,
5. Buyisela esimweni esizenzakalelayo sasekuqaleni.

• Cindezela okhiye ukuze ukhethe “ADV”, bese ucindezela ukungena. Ku-ADV, cindezela or ukuze ukhethe i-Buzzer, Altitude, Restore noma Human/Plant.
• Ukufaka i-Buzzer, cindezela bese usebenzisa or ukuvula/ukuvala i-alamu ye-buzzer. Okuzenzakalelayo kuvaliwe.
• Ukufaka i-Altitude, cindezela bese usebenzisaor ukulungisa. Ububanzi buyi-50M kuye ku-5000Meter. 50M/isinyathelo.
• Ukuze ukhethe Isitshalo, uzobona isithonjana sesitshalo  ) kuyabaneka, cindezela ukuqinisekisa. Manje, okukhiphayo kwakho okudluliselwe kuzokwenziwa kusebenze kuyilapho inani le-Co2 liphansi kunomkhawulo.
• Ukuze ukhethe Umuntu, uzobona isithonjana somuntu liyabaneka, isikhathi sokuqinisekisa. Manje, okukhiphayo kwakho okudluliselwe kuzokwenziwa kusebenze kuyilapho inani le-CO2 liphezulu kakhulu.
• Ukubuyisela kokumisiwe kwasembonini, cindezela bese ubamba amasekhondi angu-3 kuze kube ibhiphu ezwakalayo. Manje, sonke Isikhungo/Indawo/Isikhathi Seshadi/ Calibrate/Altitude zonke zizobuyisela ku-1200 ppm/400ppm/1 Day kanye ne-OM.

UKUXOXA IZINKINGA

• Ayikwazi ukuvula
  Hlola ukuthi amandla axhumeke kahle yini.
  Hlola ukuthi i-fuse yonakele yini
• Impendulo enensayo
  Hlola ukuthi amashaneli okugeleza komoya ku-sensing probe avinjiwe yini.
• I-CO2 efundwayo ithi "Sawubona"
  Kusho inani elilinganisiwe lingaphezulu kuka-5000ppm. Khipha inzwa emoyeni omusha ukuze uyibuyisele kusibonisi esijwayelekile.
• Imilayezo yephutha
  • Err4, kusho i-IR lamp iphutha
    Sicela uxhume kabusha i-adaptha yamandla
  • I-Err5 isho iphutha lepharamitha yangaphakathi
    Sicela uxhume kabusha i-adaptha ye-ower
  • I-Err6isho iphutha lokuxhumana
    Sicela uxhume kabusha iyunithi yenzwa

Uma izindlela ezingenhla zokukhulula i-Err4 ~ 6 zingasebenzi, sicela uxhumane nesitolo lapho uthenge kuso idivayisi ukuze uthole isevisi.

INKCAZO

IWARANTI
Imitha igunyaziwe ukuthi ingabi nasici ezintweni ezibonakalayo nasemsebenzini isikhathi esingangonyaka kusukela ngosuku elithengwe ngalo. Lesi siqinisekiso sifaka ukusebenza okuvamile futhi asibandakanyi ukusetshenziswa kabi, ukuhlukumeza, ukuguqulwa, ukunganakwa, ukulungiswa okungafanele, noma umonakalo obangelwa ukuvuza kwamabhethri. Ubufakazi bokuthenga buyadingeka ukuze kulungiswe iwaranti. Iwaranti ayisebenzi uma imitha ivuliwe.

UKUBUYISA UKUGUNYAZWA
Ukugunyazwa kufanele kutholwe kumphakeli ngaphambi kokubuyisela izinto nganoma yisiphi isizathu. Uma udinga i-RA (Ukugunyazwa Kokubuyisela), sicela ufake idatha ephathelene nesizathu esingalungile, amamitha kufanele abuyiswe kanye nokupakishwa okuhle ukuze kuvinjelwe noma yimuphi umonakalo ekulethweni kanye nomshuwalense ngokumelene nokulimala okungenzeka noma ukulahleka.

EMINYE IMIKHIQIZO EHLOBANE
Eminye imikhiqizo ehlobene ye-COz:

• Imodeli 7752 ephathekayo Temp./CO2 imitha, inhloso jikelele.
• Imodeli 77532 ephathekayo Temp./CO2 imitha, ukusebenza okusezingeni eliphezulu.
• Imodeli 7755 ephathekayo Temp./RH/CO2 imitha, inhloso evamile.
• Imodeli 77535 Temp./RH/CO2 imitha, ukusebenza okuphezulu.

Ubukhulu:
I-Dia.5 x 20(L) mm

I-FUSE Specification

• Amp ikhodi: 1600
• Ikalwe okwamanje: 6.00A
• UMax. Umqtage:300 VAC 300 VDC
• UMax. Umqtage Drop: 150 mV
• Ukuphula Amandla: 3kA@300V AC 3KA@300V DC
• I-Pre-arcing evamile engu-12t (A*Sec):30

Indawo:
I-fuse iku-PCB. Sicela ukhulule izikulufu ezingu-7 ohlangothini olungemuva lwemitha bese ungathola i-fuse njengoba kukhonjisiwe.

AMAZINGA E-CO2 NEZINHLAHLANDLELA

Isitshalo
Le CO2 izenzakalela njenge-1200ppm yenani Lendawo Eqondiwe (maphakathi) futhi i-1200ppm ifanele uhlelo lokusebenza oluningi. Nokho, usengakwazi ukulungisa isikhungo nenani lendawo ukuze wenze ngendlela oyifisayo okukhiphayo okulawulayo okungcono kakhulu kwesitshalo sakho!

AMAZINGA E-CO2 NEZINHLAHLANDLELA

Amaleveli ereferensi Angaphoqelelwe: Izincomo ze-NIOSH

• 250-350ppm: ukugxila okujwayelekile kwangaphandle kwe-ambient 600pm: izikhalazo zekhwalithi yomoya encane
• 600-1000ppm: kuchazwe kancane ngokucace
• 1000ppm: ibonisa ukungena komoya okwanele; izikhalazo ezifana nobuhlungu bekhanda, ukukhathala kanye nokucasuka kwamehlo/umphimbo kuzosakazeka kakhulu. I-1000pm kufanele isetshenziswe njengomkhawulo ophezulu wamazinga angaphakathi.
• I-EPA Taiwan: 600ppm futhi 1000ppm
• Thayipha 1 izindawo zasendlini ezifana nezitolo, amathiyetha, izindawo zokudlela, imitapo yolwazi, i-CO ezwakalayo, ukuhlushwa kwamahora angu-8 avarge ngu-1000ppm.
• Thayipha 2 izindawo zasendlini ezinezidingo ezikhethekile zekhwalithi yomoya enhle njengezikole, izibhedlela, izikhungo zokunakekela izingane, izinga le-CO2 eliphakanyisiwe ngu-600ppm.

Umkhawulo wokuchayeka olawulayo

• I-ASHRAE ejwayelekile 62-1989: I-1000ppm CO2 ukugxila esakhiweni esihlala abantu akufanele kudlule u-1000ppm.
• Umbiko wokwakha 101 (BB101): 1500ppm UK amazinga ezikole athi i-CO2 ngesilinganiso usuku lonke okungukuthi 9am kuya ku-3.30 pm) akumele idlule ku-1500ppm.
• I-OSHA: 5000ppm
  Isilinganiso sesikhathi sesisindo esingaphezu kwezinsuku ezinhlanu zamahora angu-8 akumele sidlule ku-5000ppm.
• Germany, Japan, Australia, UK…: 5000ppm amahora angu-8 anesisindo esimaphakathi emkhawulweni wokuchayeka ngu-5000pm.

Ukunemba, i-Zenith ye Izinsimbi zokulinganisa / zokuhlola!

• I-Hygrometer / Psychrometer
• I-thermometer
• I-anemometer
• Imitha Yezinga Lomsindo
• Imitha yokugeleza komoya
• I-Infrared Thermometer
• K thayipha I-thermometer
• KJT uhlobo lwe-thermometer
• KJTRSE uhlobo lwe-thermometer
• Imitha ye-pH
• I-Conductivity Meter
• TDS Imitha
• YENZA Imitha
• I-Saccharimeter
• I-Manometer
• Imitha ye-Tacho
• Lux / Light Meter
• Imitha Yomswakama
• Isilokhi sedatha
• I-Temp./RH Transmitter
• I-Wireless Transmitter ……….

Imikhiqizo eyengeziwe iyatholakala!

FAQ

Umbuzo: Ngingayithenga kuphi i-fuse entsha yemitha?
A: Xhumana nomsabalalisi noma uthenge ukuze uthenge ifyuzi entsha engu-3kA@300VAC uma kudingeka. Bheka isithasiselo esikubhukwana ukuze uthole imininingwane eyengeziwe.

Q: Zisho ukuthini izinkomba ze-LED?
A: Ikhiphedi nezinkomba ze-LED zisiza ekuzulazuleni kwemenyu, ukusetha, futhi zinikeze ulwazi lwesimo olufana nesimo samandla, ukutholwa kwasemini, nokwenza kusebenze i-relay.

Amadokhumenti / Izinsiza

comcube 7530-US Co Controller 2 Ngenzwa Yangaphandle [pdf] Incwadi Yeziqondiso 7530-US, 7530-EU, 7530-UK, 7530-FR, 7530-AU, 7530-US Co Controller 2 Ngenzwa Yangaphandle, 7530-US, Co Controller 2 Ngenzwa Yangaphandle, Isilawuli 2 Ngenzwa Yangaphandle, Inzwa Yangaphandle, Inzwa

Izithenjwa

• Imaniwali yosebenzisayo