I-CGSLIT-LOGO

CGSULIT TS02 Bluetooth TPMS Sensor

CGSULIT-TS02-Bluetooth-TPMS-Sensor-PRODUCT

 Exploded Diagram of TPMS Sensor Assembly

CGSULIT-TS02-Bluetooth-TPMS-Sensor- (1)

Imininingwane Yezobuchwepheshe

Impilo Yebhethri Iminyaka engu-5+
I-Operating Temperature -40°C kuya +105°C
Izinga Lokushisa Lesitoreji -40°C kuya +105°C
Ibanga Lokukala Lokushisa -40°C kuya +105°C
Ukunikezwa kwamandla kagesi 3V
Umswakama Osebenzayo ≤90%
Imvamisa Yokusebenza 2402-2480MHz
Ibanga Lokulinganisa Ingcindezi I-0-800 kPa
Ukunemba Kwesilinganiso Sokucindezela ±10 kPa
Ukunemba Kwesilinganiso Sokushisa ±3°C
Acceleration Support ±250 g
Amandla Okudlulisa 4–6 dBm
Amandla ebhethri 345 mAh
Isilinganiso sokuvikelwa kwe-Ingress IP67
Ubukhulu bephakheji (L×W×H) 73 × 30 × 45 mm
Isisindo sephakheji 44.1 g

Uhlu lokupakisha

Into Ubuningi
Finished Product Packaging Box 1
Bluetooth Tire Pressure Sensor Unit 1
Black/Coffee-Colored Aluminum Valve Stem 1
Isikulufu 1

Isingeniso Sokusebenza

  1. Deflate the tire Remove the valve cap and valve core, then fully deflate the tire. Use an air-powered bead breaker to separate the outer tire bead from the rim.
    Note: Ensure that the valve stem is positioned 180° opposite the bead breaker blade.CGSULIT-TS02-Bluetooth-TPMS-Sensor- (2)
  2. Remove the tire Secure the tire on the tire changer. Position the valve stem at the 1 o’clock position relative to the tire changer’s mount/demount head. Insert the tire lever and lift the tire bead over the mount head to remove the bead.
    Note: Maintain this starting position throughout the demounting process. CGSULIT-TS02-Bluetooth-TPMS-Sensor- (3)
  3.  Remove the sensor Use a screwdriver to loosen the retaining screw on the valve stem to detach the sensor. Then loosen the retaining nut and remove the valve stem. CGSULIT-TS02-Bluetooth-TPMS-Sensor- (4)
  4. Install the sensor and valve stem
    1. Step 1: Insert the valve stem through the valve hole from the inside of the rim.
    2. Step 2: Using a holding tool, tighten the nut to 4.0 N-m (Newton-meters) torque.
    3. Step 3: Adjust the installation angle so the sensor sits flush against the rim, then tighten the retaining screw.
    4. Step 4: The sensor and valve stem are now installed.
  5.  Install the tire Place the tire onto the rim, ensuring that the valve stem is positioned 180° opposite the mount head. Mount the tire onto the rim following the tire changer manufacturer’s instructions.

CGSULIT-TS02-Bluetooth-TPMS-Sensor- (6)

Ukumatanisa kanye Nokuxhumana

  1. Aqale Imoto
    Once the vehicle is started, it will automatically search for the installed Bluetooth Tire Pressure Monitoring Sensors (TPMS).
  2. Ukuxhumana Okuzenzakalelayo
    When the vehicle speed reaches 24 kph or above and is maintained for 1-3 minutes, the in-vehicle system will automatically detect the sensors and synchronize the data. When the tire pressure and temperature for all four wheels are displayed on the “Vehicle Status” or “Tire Information” screen, the connection is successful. If the connection fails, restart the vehicle or check the sensor installation and battery level.

Qaphela
Before installing the sensor, please read all instructions and precautions carefully. It is recommended that the installation be performed by a professional. Failure to follow the installation instructions may result in the tire pressure sensor not functioning properly.

Isexwayiso se-FCC

Le divayisi ithobela ingxenye 15 yeMithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:

  1. Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi, futhi
  2. Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

Noma yiziphi Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.

Qaphela: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lo mshini ukhiqiza ukusetshenziswa futhi ungakhipha amandla efrikhwensi yomsakazo futhi, uma ungafakiwe futhi usetshenziswe ngokuhambisana nemiyalelo, ungabangela ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

  • Hlela kabusha noma hambisa uthi olwamukelayo.
  • Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
  • Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
  • Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-FCC ebekwe endaweni engalawuleki. Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20cm phakathi kwerediyetha nomzimba wakho.

FAQ

What should I do if the connection fails during pairing?

: If the connection fails, try restarting the vehicle or checking the sensor installation and battery level. Ensure that the vehicle speed reaches the required threshold for automatic connection.

Can I install the sensor myself?

It is recommended to have the sensor installed by a professional to avoid any issues with functionality. Follow all provided instructions carefully.

Amadokhumenti / Izinsiza

CGSULIT TS02 Bluetooth TPMS Sensor [pdf] Incwadi Yeziqondiso
TS02, TS02 Bluetooth TPMS Sensor, Bluetooth TPMS Sensor, TPMS Sensor, Sensor

Izithenjwa

Shiya amazwana

Ikheli lakho le-imeyili ngeke lishicilelwe. Izinkambu ezidingekayo zimakiwe *