#BB8KB08
Uhlobo lwe-Harness B
8 amalambu azungezayo
Incwadi Yomnikazi

 IZINGXENYE ZOKUFUNDA

A. I-1x Type B Main Harness (BB8K002)
B. 2x Ama-adaptha we-Y Splitter amafushane (BB8S001)
C. I-2x Long Y Splitter Adapter (BB8S002)
D. I-2x Extension Harness ye-Perimeter Strobe (BB8SE01)
E. 1x Uhlobo B Shintsha Izintambo
F. 1x 5 Core Pigtail
G. 6x Isixhumi Ofeleba
H. 17x Izixhumi Zokugcina
I. 1x Isibambi Se-Fuse Esikumugqa + 15 Amp Fuse

AMATHULUSI ADINGEKAYO

• Izibopho ze-Zip
• Iziqeshana zekhebula

Imihlahlandlela yokufaka - BUILTBRIGHT
Skena ngevidiyo
IZIYALELO NOMA VAKASHELA
I-BUILT-BRIGHT.COM/INSTALL

 FAKA AMANOTHI

• Akukho ukusika noma ukubhola okudingekayo ekufakweni kwe-grille strobe yangaphambili.
• Ukubhoboza kuyadingeka kuphela uma ukhweza izibani esangweni lomsila ongemuva, ubhampa noma emzimbeni weloli.
• Isikhathi sokufakwa esilinganiselwe amahora angu-1.5 - 2 (akubandakanyi ukufakwa kukabakaki).
• Izibani azifakiwe kule kit. Izibani ezihambisanayo zibalwe ngezansi.

 IZIKHANYA EZIVANAYO

 DIMENTONS

Isinyathelo 1 - Hlela ukufaka

1. Susa ibhokisi lekhithi yakho yokubopha futhi uqinisekise ukuthi zonke izingxenye zikhona.
2. Beka ihhanisi futhi uhlele ukuthi uzofaka kuphi ama-perimeter strobes (athengiswa ngokwehlukana). Hlela futhi wendlale ama-adaptha adingekayo nezandiso eduze kwe-Main Harness (A).

• Qaphela: Kukhona 2x I-Short Y Splitter Adapter (B) kanye ne-2x Long Y Splitter Adapter (C) efakwe kule khithi. Sicela ukhethe i-adaptha efanele ngokuya ngendawo ofuna ukufaka izibani zakho.
  Exampkancane:
  • I-Short Y Splitter Adapter (B) made ngokwanele uma ufaka ama-perimeter strobes ku-grille. Uma ufuna ukufaka amalambu kubhampa noma ohlangothini lwemoto, kungase kudingeke ukuthi usebenzise i-Long Y Splitter Adapter (C).
  • I-Short Y Splitter Adapter (B) yinde ngokwanele uma ufaka ama-perimeter strobes angemuva ngaphansi kwesango lomsila. Uma ufuna ukufaka amalambu eceleni kwemoto, kungase kudingeke ukuthi usebenzise i-Long Y Splitter Adapter (C).
  • Amahhanisi ajwayelekile kanye nama-adaptha ahlukanisayo made ngokwanele imibhede yamaloli noma imibhede eyisicaba engafika ku-10' ubude. Uma ukhetha ukufaka ama-perimeter strobes emzimbeni weloli futhi uhambise ihhanisi ekhabetheni, ungase udinge ukusebenzisa I-Extension Harness for Perimeter Strobe (D).
• Umuntu wakudalaample ukucushwa kuboniswa ekhasini elilandelayo le isithenjwa

 EXAMPUkumiswa kwe-LE

Lesi example isebenzisa i-Harness Kit #BB8KB08, 8x Perimeter Strobe #BB6110B kanye ne-2x Grille Bracket Kit #BB96GFA.

Izibani nabakaki kuthengiswa ngokwehlukana.

Isinyathelo sesi-2 - Hlela izibani ze-Perimeter Strobe

Siphakamisa ukuhlela izibani kanye nokusebenza kwamahhanisi okuhlola ngaphambi kokuqala ukufakwa emotweni.

1. Susa ibhokisi zonke izibani ze-perimeter strobe. Isixhumi sowesilisa esinamaphini angu-5 esingangeni manzi kanye ne-pigtail yesifazane kufakiwe kuphakheji yokukhanya ngakunye.
2. Ukuze uhlele izibani zegrille namalambu angemuva ngamaqembu (kunokuwafaka ngamanye), qala ngokuxhuma I-Switch Harness (E) ku-Main Harness (A). Susa ama-pigtails kuzo zonke izibani ze-perimeter strobe bese uxhuma izibani ku-Main Harness (A).
3. Usebenzisa iphaneli yokushintsha, vula Imodi 1. Ukuze uhlele izibani zegrille, shintsha iswishi ethi Khetha Ngaphambili ukuze ukhethe iphethini. Cindezela ngaphansi kwesekhondi elingu-1 ukuze uye kuphethini elandelayo namasekhondi angu-2 ukuze ubuyele kwedlule. Vala i-Front Select, uvule i-Rear Select (ihlanganisa kokubili ophahleni nangemuva) bese uphinda inqubo. Vala iswishi ye-Mode 1. Vula Imodi 2 bese uphinda inqubo yokukhetha iphethini. Vala iswishi ye-Mode 2. Qaphela: Ungakhetha amaphethini ahlukene ngaphambili noma ngemuva kuModi 1 kanye/noma Imodi 2.
   Bheka imanuwali ye-Perimeter Strobe Light ukuze uthole ukulandelana kwamaphethini e-flash atholakalayo, noma thola imanuwali yakho yedijithali lapha.
4. Uma usuqedile, nqamula i-Perimeter Strobe Lights. Ungawashiya exhumeke kuma-adaptha ahlukanisayo angu-Y owabekile, kodwa uwashiye engaxhunyiwe ku-Main Harness (A). Nqamula I-Switch Harness (E) kusukela Embotsheni Eyinhloko (A).
   3. Ukuze uhlele ukukhanya ngakunye ngakunye, sebenzisa i-pigtail yesifazane eza nokukhanya kwe-perimeter strobe (Fig. 2).4. Bheka umdwebo 3 ukuze uthole imisebenzi yocingo ngayinye. Bheka imiyalelo yokukhanya ye-perimeter strobe ukuze uhlele izintambo OKUBOMVU, OKUMPUVU KANYE NOMHLOPHE kumaphethini we-strobe owafunayo.5. Khipha umsila we-pigtail. Uma zihlelwe ngazodwana, xhuma izibani ze-perimeter strobe kuma-adaptha ahlukanisayo angu-Y owandlalile, kodwa uwashiye engaxhunyiwe ku-Main Harness (A). Uma zihlelwe ndawonye, ​​nqamula ukuxhumana ku-Main Harness (A). Izinqwaba ezilula zizoxhunywa kabusha ku-Main Harness (A) uma isidluliselwe emotweni.

404 Ayitholakali - BUILTBRIGHT
Skena ngevidiyo
IZIYALELO NOMA VAKASHELA
I-BUILT-BRIGHT.COM/INSTALL

Isinyathelo sesi-3 - Faka ihhanisi nezibani

1. Ngaphambi kokudlula emotweni, vala izixhumi ze-Main Harness (A) nge-Connector Caps (G) enikeziwe. Ukuvala izixhumi kunconywa kakhulu ukuvimbela ukungcola noma ukugcoba ukungena kuzixhumi zesifazane ngesikhathi sokufakwa.
2. Thola ihhanisi eliyinhloko lemoto eduze kwesitimela sozimele. Qondisa i-StrobeLink™ Main Harness (A) eduze kwayo, uqale ngaphansi kwekhebhu futhi usebenze ubheke ngemuva.
3. Khipha i-Connector Cap (G) bese uxhuma i-adaptha ye-Y splitter yamalambu e-strobe angemuva.
4. Hambisa ingxenye engaphambili yehhanisi ngaphansi kwekhebhu futhi ungene endaweni yenjini. Vikela izintambo zemoto ku-firewall noma i-internal fender. Ungaphumuli izintambo ngokumelene ne-exhaust.
5. Khipha i-Connector Cap (G) bese uxhuma i-adaptha ye-Y splitter yezibani ze-strobe zangaphambili.
6. Intambo ephezulu ye-Main Harness (A) yakhelwe ama-perimeter strobes amabili ophahleni, ngaphezulu kwendawo yokubeka ikhanda, eceleni kwebhodi eligijima noma uhlangothi lombhede. Uma isetshenzisiwe, hambisa intambo ebhalwe ukuthi “Phezulu” emotweni bese uxhuma i-adaptha yesihlukanisi esingu-Y.

• Isibampukumiswa kwe-le kukhonjisiwe ekhasini elilandelayo ukuze kusetshenziswe ireferensi.

EXAMPUkumiswa kwe-LE

Isinyathelo sesi-4 – FAKA UKULAWULA KOKUKHANYA

Kunezinketho ezi-3 zokulawula izibani zakho ze-strobe:

1. Sebenzisa Iphaneli Yokushintsha Okuhlinzekiwe
2. Sebenzisa ama-Upfitter Switches
3. Sebenzisa Ukushintsha Kwenkampani Yangaphandle

• Qaphela: Uma ibhethri noma ibhokisi le-fuse lemoto lisohlangothini lomgibeli , uzodinga Ikhebuli Yokunweba Yamandla BBSE02 (ithengiswa ngokuhlukana) ukuze inwebe phakathi kwesixhumi samandla ku-Switch Harness (E) kanye ne-pigtail ukuze ufinyelele umthombo wamandla.

Inketho ngayinye ichazwe ngayodwa emakhasini ama-2 alandelayo.

Isinyathelo 4 INDLELA YOKU-1 – Sebenzisa iphaneli yokushintsha enikeziwe

1. Xhuma i-Switch Harness (E) ku-Main Harness (A). Xhuma okwesikhashana kumthombo wamandla we-12V DC ukuze uhlole ukusebenza kweswishi. Nqamula i-Switch Harness (E) uma isiqinisekisiwe.
2. Khulisa imbobo yebhuthi yokuhlanganisa amahanisi ku-firewall futhi uhambise intambo yokushintsha ye-Main Harness (A) iye kukhebhu.
3. Nquma indawo yephaneli yokushintsha bese uhambisa intambo yokushintsha i-Switch Harness (E) phakathi noma ngaphansi kwedeshibhodi bese uyixhuma ku-Main Harness (A).
4. Zulazula intambo yamandla ye-Switch Harness (E) embobeni esikiwe ngaphambilini (i-harness boot boot on firewall) kanye nomzila oya kubhethri.
5. Xhuma intambo EMNYAMA phansi. Xhuma intambo EBOMVU emandleni ebhethri. Engeza Isibambi Se-Fuse Esikumugqa + 15 Amp I-Fuse (I).

Isinyathelo sesi-4 INDLELA YESI-2 – SEBENZISA IZISHISHINI EZIPHEPHILE

1. Xhuma i-5 Core Pigtail (F) enikeziwe kusixhumi seswishi ku-Main Harness (A). Bheka umdwebo 4 ukuze uthole imisebenzi yezintambo ezingazodwana.
2. Thola i-upfitter switch relay endaweni yenjini.
3. Xhuma intambo EMNYAMA phansi.
4. Xhuma intambo OKUBOMVU noma EMBULUNGU esikhumbeni esifiselekayo se-upfitter switch. Uma iswishi ye-upfitter yenziwe yasebenza, lokho kukhanya nephethini kuzoqalisa. Izintambo eziMhlophe neziYELLOW zisetshenziselwa ukushintsha iphethini.
5. Izintambo ezingasetshenzisiwe kufanele zihlukaniswe futhi zivikelwe kusetshenziswa i-heat shrink noma itheyiphu.

Isinyathelo 4 INDLELA 3 - SEBENZISA IZINGUQUKO zenkampani yangaphandle

1. Xhuma i-5 Core Pigtail (F) enikeziwe kusixhumi seswishi ku-Main Harness (A). Bheka umdwebo 4 ukuze uthole imisebenzi yezintambo ezingazodwana.
2. Landela imiyalelo efanayo yokufaka izintambo kuKhetho 2 ngenhla.

Isinyathelo sesi-5 - Hlola + QEDA

1. Hlola ukusethwa kwe-StrobeLink™ ukuze uthole ukusebenza okufunayo. Uma sekuqinisekisiwe, vikela noma iyiphi i-wire slack enothayi be-zip.
2. Sebenzisa i-Connector Retainers (H) enikeziwe ukuze uvikele ukuxhumeka. Uma imoto yakho isebenza endaweni enokugqwala okukhulu, sebenzisa igrisi ye-dielectric kuzixhumi ukuze uvikeleke ukugqwala okwengeziwe.
3. Uma kunesixhumi esingasetshenzisiwe esiveziwe, sebenzisa i-Connector Cap (G) ukuze uyivale. Gcoba itheyiphu kukepisi ukuze uvikeleke.

BASTROP, I-TEXAS 78602
I-UNITED STATES OF AMERICA
I-WWW.BUILT-BRIGHT.COM

Amadokhumenti / Izinsiza

I-BUILTBRIGHT BB8KB08 StrobeLink Configurator [pdf] Incwadi Yomnikazi BB8KB08 StrobeLink Configurator, BB8KB08, StrobeLink Configurator, Configurator

Izithenjwa

• Imaniwali yosebenzisayo