Ikesi le-Batocera GPi kanye ne-Raspberry

Engeza amadivayisi Amandla nezinkinobho ku-Raspberry yakho

Ukuze ugcine intengo iphansi, ibhodi le-Raspberry Pi alihambi ngenkinobho yamandla, nokho kulula ukungeza eyakho! Lo mhlahlandlela uzokukhombisa ukuthi ungeza kanjani inkinobho yamandla ku-Raspberry Pi yakho engavula/ivale uhlelo lwakho lwe-BATOCERA.

Uma ungafuni ukuzakhela eyakho, izinketho ezimbalwa zokuthengisa ezidumile ziyatholakala. Bazokwengeza ukushintsha kwamandla ku-Raspberry Pu yakho, ngezinye izikhathi banikeze isilawuli sezinga lokushisa ... futhi bengeze ukubukeka kwesitayela ebhodini lakho.

• Ukushintsha Amandla Ezohwebo
  • mrovide amandla wangempela ukusikeka
  • Izindleko zizungeze i-10-25 USD
  • Ivamise ukudinga indawo yokuyakhela kuyo
• Izinkinobho Ezilula noma amaswishi e-latching
  • Ukusetha okulula kakhulu
  • Izindleko eziphansi
  • Ayikho i-powercut engenzeka

Kungani inkinobho yamandla ye-Raspberry Pi ibalulekile?
Akufanele neze “ukhiphe” intambo yamandla ku-Pi yakho njengoba lokhu kungaholela ekonakaleni okukhulu kwedatha (futhi kwezinye izimo, kulimaze ikhadi lakho le-SD). Ngisho noma i-Batocera ilungiselelwe kangcono ngokumelene nenkohlakalo yefayela iyatuswa ukuthi uvale ngokuphephile i-Pi yakho nge-Batocera's Shutdown Menu noma okungcono nakakhulu, sebenzisa inkinobho yamandla noma shintsha.

Lapho i-Batocera "ivala" i-Pi ngenkinobho elula/i-latching switch, izoyithumela esimweni sokuma, esadla amandla amancane kakhulu. Lokhu kufana nendlela wonke amakhompyutha anamuhla asebenza ngayo. Kulo mhlahlandlela sizoya kuphela esimweni sokuma ukuze sisakwazi ukuyinika amandla futhi ngokuhamba kwesikhathi ngaphandle kokuxhuma kabusha umthombo wamandla. Ungakwazi ukunqamula ugesi ngokuphephile (uma uthanda) ngaphandle kokukhathazeka ngokonakala kwedatha ngenkathi usesimweni sokuma.

Le ndlela inikeza ulwazi olungcono kakhulu lomsebenzisi uma usebenzisa i-GPi-case evela ku-Retroflag ngokwesiboneloample. Le ndlu enhle inenkinobho eyodwa kuphela yokuvula/ukuvala iRaspberry. Njengoba i-Batocera 5.25 i-OS ilungiselelwe kangcono zonke izinhlobo zamadivayisi wamandla axhunywe ku-Raspberry. Kodwa uzolahlekelwa ukulondoloza kwegeyimu yakho ye-SRM (ifayela lakho lokulondoloza elingaphakathi kwegeyimu) uma nje ucupha inkinobho yamandla ngaphakathi kweseshini yomdlalo.

Londoloza ukuvikelwa kwedatha

1. Landa umbhalo onikeziwe ngezansi
2. Londoloza lokhu ku-/userdata/system
3. Setha ibhithi elisebenzisekayo nge-chmod +x /userdata/system/custom.sh
4. Setha idivayisi yakho yamandla ngokuya ngokuqhubekayo ngezansi

custom.sh

Ukushintsha Amandla Ezohwebo

Nazi ezinye izinguquko zamandla ezentengiso/izimo zezentengiselwano ezinokushintsha kwamandla asekelwayo okwamanje. Lezi zinikeza ukunqanyulwa kwamandla kwangempela, okusho ukuthi i-Raspberry icishiwe ngempela. Ngokuvamile lawa madivayisi amancane axhunywa phezu kwe-Raspberry kusetshenziswa unhlokweni wamaphini angu-40. Ukuze uthole imiyalelo eyengeziwe yokufaka sebenzisa izixhumanisi ezinikeziwe.
Nawa amanani ongawabeka njenge-system.power.switch= ku-batocera.conf:

Igama Ledivayisi	uhlelo.amandla.switch	Ungathenga kuphi kanye nolwazi olwengeziwe lomkhiqizi	Amanothi ahlobene ne I-Batocera
I-Argon One ye-RPi4	I-ARGONONE	https://www.argon40.com/argon-one-raspberry-pi-4-case.html	Thola imininingwane eyengeziwe lapha
ATXRaspi	ATX_RASPI_R2_6	http://lowpowerlab.com/atxraspi/#installation
Icala le-DeskPi Pro	DESKPIPRO	https://deskpi.com/collections/frontpage/products/deskpi-pro-for-raspberry-pi-4
Izifunda ze-Mausberry	MAUSBERRY	http://mausberry-circuits.myshopify.com/pages/setup
msldigital PiBoard r2013	REMOTEPIBOARD_2003	http://www.msldigital.com/pages/support-for-remotepi-board-2013
msldigital PiBoard r2015	REMOTEPIBOARD_2005	http://www.msldigital.com/pages/support-for-remotepi-board-plus-2015
I-OneNineDesign Powerhat	AMANDLA	https://github.com/redoakcanyon/HATPowerBoard
I-Pimoroni OnO￀Shim	ONOFFSHIM	https://shop.pimoroni.com/products/onoff-shim
UGear Witty Pi	WITTYPI	http://www.uugear.com/witty-pi-realtime-clock-power-management-for-raspberry-pi	Iskripthi sisebenzisa i-WiringPi.
Amacala we-retroflag	I-RETROFLAG	http://www.retroflag.com	OKUSHA NESPi4 ukusekela!

Igama Ledivayisi	uhlelo.amandla.switch	Ungathenga kuphi kanye nolwazi olwengeziwe lomkhiqizi	Amanothi ahlobene ne I-Batocera
Retroflag amakesi anezinkinobho	RETROFLAG_ADV	http://www.retroflag.com	Ngokufanayo nedlule, ngaphandle kwenkinobho engase iqalise izenzo, njengokumisa ama-emulators
Ikesi le-retroflag GPIO	RETROFLAG_GPI	https://www.retroflag.com/GPi-CASE.html	Thola imininingwane eyengeziwe lapha.
Icala le-Kintaro Super Kuma/Roshambo Retro Gaming	KINTARO	https://www.amazon.com/dp/B079T7RDLX/?tag=electromake-20 / https://www.electromaker.io/blog/article/roshambo-retro-gaming-case-review

Inkinobho yokucindezela elula noma amaswishi

Kungenzeka ukwengeza inkinobho ukuvula nokuvala ikhonsoli yakho ye-Batocera kahle! Kodwa kanjani?

Iyiphi i-GPIO PIN okufanele ngiyisebenzise?
Ungangeza inkinobho yamandla ukuze uvule/uvale i-Batocera. Inkinobho ingaba inkinobho yokusunduza (inkinobho yesikhashana) noma inkinobho yokushintsha (iswishi yokuxhuma). Inothi ezinkinobho ezicindezelayo: enye i-GPIO inama-resistors adonsela phezulu akhelwe ngaphakathi (ama-resistors axhunywe ku-+3.3V), ngakho-ke kungcono ukusebenzisa amaswishi avame ukuvuleka (okufushanisiwe CHA) ngala maphini.

ukuze uxhume iswishi ku-Raspberry Pi GPIO, xhuma i-PIN ku-GPIO3 (i-PIN 5 ebonakalayo ngenhla kwesokunxele) nenye kunqwaba etholakala kwesokudla ngakwesokudla (i-PIN 6 ebonakalayo)

Ukwenza kusebenze iswishi

Imodi yeMenu ye-GUI
Thola iwindi letheminali ngokuyeka i-EmulationStation ngekhibhodi noma uthole ukufinyelela kutheminali nge-SSH. Manje faka /etc/init.d/S92switch setup futhi uzobona iwindi letheminali njengasesithombeni esingezansi. Ukusuka lapho ungakhetha futhi wenze amandla akho asebenze noma ushintshe idivayisi. Iskripthi sizokubonisa idivayisi esesivele iyasebenza (ONOFFSHIM kuleli cala) futhi sizokukhombisa ibhokisi lemilayezo encane, uma ukusethwa kwevelu kusethwe ngempumelelo. Ngemuva kwalokhu qalisa kabusha idivayisi futhi konke kufanele kusebenze kahle.

Ukwenza kusebenze mathupha
Hlola kuthebula elingenhla ukuthi yiluphi uhlobo lwesishintshi samandla oludingayo.
Bese, hlela ifayela le-config /userdata/system/batocera.conf - ku-example ngezansi nge-PIN56ONOFF.

• Ukuze uthole inkinobho yokuxhuma hlela i-batocera.conf ngomhleli wakho wombhalo owuthandayo bese wengeza i-system.power.switch=PIN56ONOFF
• Qalisa kabusha isistimu
• Kungenjalo, uma ungafuni ukuhlela ifayela futhi ungene nge-SSH noma unetheminali evuliwe bese ufaka:

i-batocera-settings-set system.power.switch PIN56ONOFF bese uqalisa kabusha. Uhlelo lwakho lwe-Batocera manje lungavulwa/lucishwe ngenkinobho!

I-Retroflag
I-Retroflag ingumkhiqizi ogxila kukesi le-retro lochungechunge lwe-Raspberry Pi kanye nezilawuli zegeyimu ye-retro ebukekayo. Eminyakeni edlule bakwazile ukuletha izindlu ezibukeka kahle emakethe. Lokhu kugqugquzelwe ngamadivayisi emidlalo asuka enkathini yegolide yama-consoles wegeyimu. Uma ungumnikazi oziqhenyayo we-GPicase, bheka lapha. Ngaphandle kokubukeka okuhle kukhona njalo izinkinobho ezisebenzayo zamandla kanye/noma ukusetha kabusha okungenzeka. Kodwa kufanele uthathe izinyathelo ezimbalwa lapho.

1. Nika amandla i-Safe shutdown switch ku-PCB! Lokhu kushintsha okuncane kuncike endlini esetshenzisiwe, bheka imanuwali ethunyelwe evela ku-Retroflag ukuthi ungakwenza kanjani lokhu.
2. Hlela i-batocera.conf bese usetha imodi yokushintsha efanele.
   • Ungahlela ifayela le-config kusuka ku-SAMBA ukwabelana nomhleli wakho wombhalo ozinikezele
   • noma sebenzisa i-SSH futhi ungakwazi ukuhlela ifayela le-config nge-nano/userdata/system/batocera.conf
   • noma sebenzisa imodi ye-GUI, udinga i-SSH yale ndlela, futhi.
3. Vula noma Khetha i-powerswitch system.power.switch elungile=RETROFLAG
4. Qalisa kabusha, lokhu kuzokwenza kusebenze isici sokuvala i-Safe Shutdown

Okwecala le-NESPi 4 kuphela
Kufanele uqalise kabusha okwengeziwe! Uxolo bafo, kodwa sidinga ukwenza i-autoconfig ngemuva kwezigcawu!

Futhi, ngecala le-NESPi4, ungase uhlangabezane nokuvilapha usebenzisa i-HDD/SSD “cartridge”. Nasi isixhumanisi se-Reddit esikunikeza indlela yokusilungisa (ngisho noma okuthunyelwe kwe-reddit bekubhalelwe i-RetroPie, kubikwe njengokuthi KULUNGILE naku-Batocera).

I-Argon One
Yenza kusebenze ifeni ye-Argon One ngokwengeza i-system.power.switch=ARGONONE efayeleni lokulungiselela batocera.conf.
Ngokuzenzakalelayo, ifeni iqala ku-55 degrees Celsius. Ungakwazi ukuchaza izinga lokushisa/isitebhisi sejubane labalandeli ngokuhlela ifayela /userdata/system/configs/argonone.conf (lingakwazi futhi ukuhlelwa ukusuka kunethiwekhi, kusetshenziswa ifolda ye-SHARE SMB).

55=10
60=55
65=100

Ngaleli iladi, ifeni iqala ku-10% uma ifinyelela ku-55 degrees, ikhuphuke ifike ku-100% uma ifinyelela ku-65 degrees Celsius. Kusukela kuzincomo zomthengisi, kuphephile ukuqala ifeni ngamadigri angama-55 kuphela. Umsindo omncane. 😉

Kusuka ku:
https://wiki.batocera.org/ – Batocera.linux – Wiki

Isixhumanisi esihlala njalo:
https://wiki.batocera.org/add_powerdevices_rpi_only?rev=1633139243
Isibuyekezo sokugcina: 2021/10/02 03:47

https://wiki.batocera.org/

Amadokhumenti / Izinsiza

Ikesi le-Batocera GPi kanye ne-Raspberry [pdf] Iziyalezo Ikesi le-GPi kanye nokusajingijolo, Ikesi kanye nokusajingijolo, okusajingijolo

Izithenjwa

• Imaniwali yosebenzisayo