UKUQALA NGOKUSHESHA
I-SOFTOPOP SP2 Oscillator Synthesizer
THIS SOFTPOP SP2 IS RUNNING
THE DIGITAL VCO FIRMWARE.
By default, the Softpop SP2 oscillator produces a PULSE wave. By patching TRI into FILTER IN, you can change the waveform.
To switch oscillator waveforms at the TRI output, hold SLIDE + MIDI and press GATE buttons 1-8.
Hold SLIDE and move the FINE TUNE fader to alter the shape of each waveform.
https://bastl-instruments.com/content/files/softpop2-digitalvco-manual.pdf
| ● Fractal Triangle ● Animated Fractal Triangle ● Super Triangle ● Triangle To Noise |
● 2×Fractal Triangle ● Exp Saw Detune ● Super Saw ● Glitch Radio |
See the full manual here
WWW.BASTL-INSTRUMENTS.COM
Join our Community here
IZISEKELO
PLAY= ▲ and TRIG= ▼ when used with other buttons
IGATE=cindezela noma yiliphi isango elilodwa
GATES=press multiple gates one after another while still holding the context button
PATTERN+SLIDE+PITCH FADER = RECORD pitch sequence
PATTERN+SLIDE+TRIG = RECORD gate sequence
SLIDE+MIDI+GATE = select waveform
SLIDE+FINE TUNE = alter the wave shape of the waveform
ISIKALI+SLIDE=LONDOLOZA ibhange
ISIKALI+PATTERN+GATE=LAISHA ibhange
ISIKALI+GATE=khetha isikali
ISIKALI+AMAGATES=izikali zamaketango
ISIKALI+ ▲/▼ =khetha isemitone
SCALE+TEMPO=semitone on/off (indicated by PLAY LED and GATE 1)
ISIKALI+TEMPO+ ▲/▼ =guqula isikali sonke nge-semitone eyodwa
SCALE+MIDI=copy MIDI-defined scale to the currently edited scale
I-MIDI
MIDI >5s=MIDI funda
MIDI+GATE=misa isiteshi se-MIDI sibe ngu-1 kuya ku-8
MIDI+selected GATE=set MIDI channel to 8+1 to 8
MIDI+PLAY=vula/vala iwashi le-MIDI
MIDI+SCALE=vula/vala imodi yesikali se-MIDI
MIDI+PATTERN=vula/vala i-CV Out ikhiqize i-Velocity CV
MIDI+TRIG=activate automatic envelope triggering from MIDI Notes
UKUBUYEKEZWA KWE-FIRMWARE
Hold MIDI at startup and play a WAV file into the Reset input.
I-SEQUENCER
PATTERN+GATE=khetha iphethini
I-PATTERN+GATES=amaphethini eketango
I-PATTERN+ ▲/▼ =shifta iphethini yonke ngesinyathelo esi-1
PATTERN+TEMPO=copy currently selected pattern to the next selected pattern
PATTERN+MIDI=activate triggered pitch mode = pitch is only updated on active gates
SLIDE+GATE=activate/deactivate the slide on that step SLIDE+ ▲/▼ =set slide rate (1=no slide)
DLALA (okufushane)=qala futhi umise ukulandelanisa
PLAY+GATE=khetha imodi yokudlala
DLALA+AMAGATES=izindlela zokudlala zamaketango
TEMPO+TEMPO=tap tempo
TEMPO+ ▲/▼ =increase/decrease tempo
I-TEMPO+ ▲/▼ >1s= kancane kancane yandisa/yehlisa i-tempo
I-TEMPO+GATE=khetha isihlukanisi/isiphindaphindi
I-TEMPO+ ▲+▼ =funda i-tempo emvilophini yokuluphu
TRIG=vula imvilophu
TRIG+GATE=activate temporary FX (hold several to combine)
I-TRIG+PLAY+GATES=rekhoda iluphu ye-FX yesikhashana
TRIG+PLAY=susa iluphu ye-FX yesikhashana
TRIG+SLIDE=set ENV G to GATE/TRIGGER
TRIG+PATTERN=set SLIDE G to GATE/TRIGGER
DIRECT STEP EDITING
GATE+ ▲/▼ = edit step pitch
GATE+PITCH FDER = edit step pitch
GATE+TEMPO = preview step pitch
BOOT/POWER UP SETTINGS
Hold SCALE at power up=shorten the range of the PITCH fader
Hold SLIDE at power up=make FINE-TUNE fader control waveshape by default, FINE-TUNE is hidden under SLIDE+FINE-TUNE
Hold PATTERN at power up=toggle CV Pitch tracking mode for CV out
Hold SCALE+SLIDE at power up = calibration and test mode
Hold PLAY+TEMPO+TRIG at power up=factory reset
ISINGENISO
I-FIG. 01
0. Connect USB power, flip the POWER switch UP, and connect headphones or a speaker to the OUTPUT
1. Put all controls into the indicated position to start
2. Start playing with PITCH and CUTOFF
3. Bring PITCH MOD and CUTOFF MOD faders UP to modulate them
4. Use the envelope RATE and SHAPE to change the modulation
5. Explore the RESONANCE and POP faders along with the filter mode HP/BP/LP switch
I-SEQUENCER
It is the digital brain of the softPop2 and will make it sound musical in no time.
OSCILLATOR
ungumthombo wakho we-tonality.
I-fader yesokunxele yi-PITCH ye-oscillator.
SCALE selects the semitones used. Hold SCALE and press one of the 8 GATE buttons to select a scale.
The right fader is the PITCH MOD. It adds pitch modulation, which is randomized each time the envelope is triggered.
I-FINE-TUNE ilungisa ukushuna. Yigcine kwesokudla.
ISIHLUNGI
ilolonga umbala/i-timbre yomsindo wakho ngokusika i-spectrum yomsindo kumaza we-CUTOFF.
I-fader yesokunxele iyimvamisa ye-CUTOFF.
Iswishi ye-HP/BP/LP ikhetha uhlobo lwesihlungi.
HP=Highpass: passes frequencies above the cutoff (cuts bass)
BP=Bandpass: passes frequencies around the cutoff (cuts bass and treble)
LP=Lowpass: passes frequencies below the cutoff (cuts treble)
I-fader yesokudla yi-CUTOFF MOD: ukuthi imvilophu iyithinta kangakanani imvamisa yokusika.
RESONANCE makes the filter self-oscillate and emphasizes frequencies around the cutoff frequency.
POP increases the cross-modulation between the oscillator and filter, resulting in a harsher sound to the right. Keep left for softer sounds.
KHAWULA
ibumba uhlamvu lomsindo wakho ngesikhathi.
I-RATE ilawula isivinini semvilophu.
I-SHAPE ilungisa isilinganiso phakathi kwesigaba sokuhlasela nokubola kwemvilophu.
I-CYCLE yenza imvilophu inyakaze njenge-LFO.
I-TRIG izocupha imvilophu kanye.
The DRONE/ENV switch lets you select between DRONE
(sound always on) or ENV (volume increases with the envelope).
ISINGENISO SEQUENCER
I-FIG. 02
0. To start, set the CYCLE switch of the envelope to the lower position (off).
1. Press the PLAY button so it starts blinking.
If it is not blinking, adjust the tempo settings.
2. Press the GATE buttons to select when the envelope is triggered. Flip the DRONE/ENV switch or pull the CUTOFF MOD fader to hear the effect of the envelope.
3. To RECORD a melody:
a) hold down PATTERN+SLIDE to RECORD
b) move the PITCH FADER to RECORD (keep the PITCH MOD fader down for start)
c) release PATTERN+SLIDE buttons to hear your melody.
4. Bring up PITCH MOD to apply randomness to your melody.
5. Hold SCALE and press GATE to select a scale. Press multiple GATES in a row to chain scales.
6. Hold PATTERN and press GATE to select and make a new pattern.
7. When you have more patterns, let’s make them play one after another. Hold PATTERN and press several GATES in a row to chain the patterns.
8. Press SLIDE + SCALE to SAVE all your music for the next time you turn on the softPop2.
9. Hold a GATE and press UP/DOWN or move the PITCH FADER to edit the pitch of the step.
10. Hold GATE and press TEMPO to preview the pitch of the step.
HLOLA IPHITHI FUTHI UZAME UKUKHIPHA IKHODI
ZONKE IZINTO EZILILE ONGAZENZA NGESOFTPOP2!
Amadokhumenti / Izinsiza
 |
BASTL INSTRUMENTS SOFTPOP SP2 Oscillator Synthesizer [pdf] Incwadi Yeziqondiso SOFTPOP SP2, SOFTPOP SP2 Oscillator Synthesizer, Oscillator Synthesizer, Synthesizer |