1. Imiyalelo Yezokuphepha Ebalulekile
Please read all instructions carefully before using this appliance to prevent injury or damage. Keep this manual for future reference.
- Ensure the appliance is placed on a stable, level surface away from direct sunlight and heat sources.
- Ungayicwilisi intambo kagesi, ipulaki, nanoma iyiphi ingxenye yomshini emanzini noma kolunye uketshezi.
- Gada izingane lapho into esetshenziswayo isetshenziswa.
- Sebenzisa amanzi aphuzwayo kuphela kumenzi weqhwa.
- Khipha into esetshenziswayo ngaphambi kokuhlanza noma uma ingasetshenziswa isikhathi eside.
- Ungasebenzisi noma isiphi isisetshenziswa ngentambo noma ipulaki eyonakele, noma ngemva kokuba umshini ungasebenzi kahle noma wonakaliswe nganoma iyiphi indlela.
- Gcina komoya ofanele eduze komshini.
2. Umkhiqizo Uphelileview
The EUHOMY LunaArc Crescent Ice Maker is designed for convenient ice production. It features crescent-shaped ice cubes, rapid ice production, and an automatic cleaning system.
Figure 2.1: EUHOMY LunaArc Crescent Ice Maker with ice basket visible.
The ice maker produces crescent-shaped ice cubes that are designed to melt slower than traditional ice, preserving the flavor of beverages. It can produce up to 28 pounds of ice per day, with the first batch ready in approximately 12 minutes.
Figure 2.2: Compact design and dimensions of the ice maker.
3. Imininingwane
| Isici | Ukucaciswa |
|---|---|
| Ibhrendi | I-EUHOMY |
| Igama Lemodeli | IM022-LBS-USEH |
| Ubukhulu bomkhiqizo | 15.1"D x 9.8"W x 16.5"H |
| Capacity (Ice Basket) | 2.2 Amakhilogremu |
| Wattage | 120 watts |
| Voltage | 110 volts |
| Isiqandisi | R290a |
| Ukukhiqizwa Kweqhwa Ngosuku | 28 Amakhilogremu |
| I-UPC | 850077022005 |
| Okubalulekile | Insimbi, Ipulasitiki |
| Isisindo sento | 21.4 amakhilogremu |
| Izingxenye Ezihlanganisiwe | Ice Maker Machine, Ice Scoop, Ice Basket, Instruction Manual |
4. Setha
4.1 Ukuqaqa
- Khipha ngokucophelela umenzi weqhwa emaphaketheni awo.
- Susa zonke izinto zokupakisha, kufaka phakathi i-tape namafilimu okuzivikela.
- Check for any damage during transit. If damage is found, do not operate the appliance and contact customer support.
4.2 Ukubekwa
- Place the ice maker on a flat, stable, and heat-resistant surface.
- Ensure there is at least 6 inches of clearance around the appliance for proper ventilation.
- Gwema ukubeka iyunithi eduze kwemithombo yokushisa noma elangeni eliqondile.
4.3 Ukuhlanza Kokuqala
- Before first use, clean the interior of the ice maker. Refer to the 'Maintenance and Cleaning' section for detailed instructions.
4.4 Ukugcwalisa Amanzi
The ice maker offers two methods for water refilling:
- Top-up via the small inlet: Pour potable water directly into the designated small inlet at the top of the unit.
- Khipha ithangi lamanzi: Pull out the water tank completely, fill it with potable water, and then push it back into place.
Figure 4.1: Water refilling options.
Always use drinking water or filtered water for optimal ice quality.
5. Iziqondiso Zokusebenza
5.1 Ukuvula / Ukuvula
- Xhuma umenzi weqhwa endaweni kagesi esekelwe phansi.
- Cindezela inkinobho 'ON/OFF' button to start or stop the ice making process.
5.2 Ice Making Cycle
Once powered on and with sufficient water, the ice maker will begin its cycle. The first batch of crescent ice cubes is typically ready in approximately 12 minutes.
5.3 Ice Thickness Adjustment
The ice maker allows for adjustment of ice cube thickness:
- Sebenzisa i- '+' futhi '-' buttons to select desired ice thickness (Small, Medium, or Large).
- Available thickness options are approximately 6.5mm (Small), 10mm (Medium), and 14mm (Large).
Figure 5.1: Ice thickness options.
5.4 Smart Scheduling (Timer Function)
The ice maker features a 24-hour programmable timer:
- Cindezela bese ubamba i '-' button for 3 seconds to activate the timer function.
- Adjust the desired delay time for ice making using the '+' futhi '-' izinkinobho.
- This allows you to schedule ice production up to 24 hours in advance.
Figure 5.2: Timer setting for scheduled ice production.
5.5 Izinkomba ze-LED
The intelligent LED status system provides visual feedback on the ice maker's operation:
- Ukukhanya Okuluhlaza: Indicates active ice production.
- Ukukhanya Okuphephuli: Indicates the ice basket is full.
- Ukukhanya Okuwolintshi: Indicates a low water level, requiring a refill.
Figure 5.3: LED status indicators.
6. Ukunakekela kanye Nokuhlanza
6.1 Automatic Self-Cleaning System
The ice maker features an intelligent auto-cleaning function:
- Ukuvula, cindezela bese ubamba i '+' inkinobho imizuzwana engu-5.
- The cleaning cycle lasts approximately 20 minutes, sanitizing the internal components and removing residue.
Figure 6.1: Automatic cleaning process.
6.2 Ukuhlanza Mathupha
- Khipha into esetshenziswayo ngaphambi kokuhlanza.
- Remove the ice basket and clean it with mild detergent and warm water. Rinse thoroughly.
- Wipe the interior and exterior surfaces with a soft cloth and mild detergent.
- For thorough cleaning, drain any remaining water from the reservoir.
6.3 Smart Water Recycling
The ice maker is equipped with a smart water recycling system. Melted ice is automatically collected, filtered, and reused for subsequent ice production, enhancing water efficiency.
Figure 6.2: Smart water recycling system.
7. Ukuxazulula izinkinga
Uma uhlangabezana nezinkinga nge-ice maker yakho, sicela ubheke izinkinga ezilandelayo nezisombululo:
| Inkinga | Imbangela Engenzeka | Isixazululo | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| I-ice maker engakhiqizi iqhwa | Low water level; power issue; ambient temperature too high. | Check water level and refill; ensure unit is plugged in and power is on; move unit to a cooler environment. | ||||||||||
| Ama-ice cubes mancane kakhulu noma athambile | Water temperature too high; ambient temperature too high; ice thickness setting. | Use colder water; ensure proper ventilation; adjust ice thickness setting to a larger size. | ||||||||||
Amadokhumenti Ahlobene - IM022-LBS-USEH
|
