Isingeniso
This manual provides essential information for the safe and efficient operation of your Easythreed K10 Small Entry Level Portable 3D Printer. Please read this manual thoroughly before using the printer to ensure proper setup, operation, and maintenance.
Figure 1: Easythreed K10 3D Printer overview, showing its compact design and a sampukuphrinta.
Izinyathelo Zokuphepha
- Always ensure the power adapter voltage and current match the printer's requirements (12V >= 2A).
- Caution: Nozzle is Hot. Never touch the hot nozzle during or immediately after operation. Use appropriate tools for filament removal.
- Keep the printer away from flammable materials and out of reach of small children.
- Operate the printer in a well-ventilated area.
- Do not attempt to modify the printer's internal components unless specifically instructed by official Easythreed documentation.
Figure 2: Safety warnings on the power adapter and nozzle, highlighting the importance of high-temperature nozzle isolation.
Umhlahlandlela Wokusetha
The Easythreed K10 printer is designed for quick and easy assembly. Follow these steps to set up your printer:
- Install Y-axis and control box base: Connect the Y-axis component to the main control box base.
- Install printing platform: Secure the removable printing platform onto the base.
- Install Z-axis: Attach the Z-axis assembly, which supports vertical movement.
- Install X-axis: Mount the X-axis component, responsible for horizontal movement.
- Install print head: Connect the print head to the X-axis.
- Install consumables rack: Attach the filament holder to the top of the printer.
- Xhuma Amakhebuli: Ensure all necessary cables are securely connected.
- Layisha i-Filament: Insert the 1.75mm PLA or TPU filament into the print head.
- Vula: Connect the power adapter and switch on the printer.
Figure 3: Visual guide for assembling the K10 printer, demonstrating the modular components.
Ukulinganiswa kombhede
Proper bed leveling is crucial for successful prints. The K10 features a simplified leveling process:
- Press the "1" button to initiate the leveling process. The nozzle will move to the first leveling point.
- Adjust the leveling screw beneath the print bed until the nozzle is just touching the magnetic plate. A piece of paper should slide with slight resistance between the nozzle and the bed.
- Repeat this process for points "2", "3", and "4" by pressing the corresponding buttons.
- Incorrect leveling can lead to print adhesion issues or damage to the build plate. Refer to the included teaching videos for a detailed demonstration.
Figure 4: The printer's build plate with sample prints, demonstrating the ease of the leveling process.
Initial Operation Video
Video 1: A comprehensive guide demonstrating the assembly, filament loading, leveling, and first print process for the Easythreed K10 3D printer.
Imiyalelo yokusebenza
Ukuhambisana kweFilament
The K10 printer supports 1.75mm PLA and TPU filaments. A 250g spool is standard, and an included extension holder STL file (printable from the TF card) allows for 500g spools.
Figure 5: The printer demonstrating its compatibility with PLA and TPU filaments, suitable for various printing needs.
Inqubo Yokuphrinta
- The K10 operates exclusively via TF card. It does not require a direct computer connection for printing.
- Use only G-code files that have been converted using the provided teaching video and profile.
- For slicing, popular software like Cura or ORCA Slicer can be used. Ensure you select the EasyThreed profile ukuze uthole imiphumela emihle.
- Insert the TF card with your G-code file into the printer's slot.
- Press the print button to start your print.
Open Source & Customization
The K10 is an open-source 3D printer, allowing for hardware and software modifications. For new users, Easythreed offers free 3D model downloads and additional technical tips to assist with creative projects.
Isondlo
- Regularly clean the print bed to ensure proper adhesion. The removable build plate simplifies this process.
- Inspect the nozzle for any clogs or debris before each print. Use tools to carefully remove any excess filament.
- Keep the printer free from dust and foreign objects.
- Ensure all moving parts are free from obstruction.
Ukuxazulula inkinga
Izinkinga Ezivamile Nezixazululo:
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Ukuphrinta akunamatheli embhedeni | Incorrect bed leveling, dirty print surface, wrong print settings. | Re-level the print bed carefully. Clean the print surface with isopropyl alcohol. Adjust initial layer settings in your slicer (e.g., increase initial layer height or temperature). |
| Intambo ayikhiphi | Ukuvaleka kwe-nozzle, izinga lokushisa elingalungile, intambo ephithene. | Clear the nozzle using a needle or cold pull method. Verify correct print temperature for your filament type. Ensure filament spool is free and untangled. |
| Poor print quality (e.g., "lumpy" prints, layer shifts) | Printer wobbling, incorrect print speed, loose belts. | Ensure the printer is on a stable surface. Reduce print speed. Check and tighten any loose belts or screws. |
| TF card not recognized or corrupted | Konakele files, faulty card reader, incompatible card. | Ensure G-code files are correctly generated. Try a different TF card. Format the TF card (FAT32) and re-transfer files. |
If you encounter issues not listed here, please refer to the official Easythreed support resources or contact customer service.
Imininingwane
| Isici | Imininingwane |
|---|---|
| Imodeli | K10 |
| Yakha Ivolumu | 100 x 100 x 100 mm |
| Ubukhulu bomkhiqizo (L x W x H) | 6.1 x 7.87 x 6.89 amayintshi (15.5 x 20 x 17.5 cm) |
| Isisindo sento | 2.2 pounds (1 kg) |
| Ukuhambisana kweFilament | 1.75mm PLA, TPU |
| Ukunemba Kokuphrinta | 0.1 mm |
| Imfuneko Yamandla | 12V / 2A (Uhlobo-C) |
| Indlela Yokusebenza | TF Card Only |
| Okubalulekile (Uhlaka) | Stainless Steel (for certain components, main frame is likely plastic/aluminum) |
| Umbala | Mnyama |
Figure 6: The compact dimensions of the K10 printer, illustrating its suitability for various workspaces.
Iwaranti kanye Nokusekela
The Easythreed K10 3D Printer comes with a Iwaranti yonyaka ongu-1 from the date of purchase. Easythreed also provides ukwesekwa kobuchwepheshe bempilo yonke kulo mkhiqizo.
- Ukulimala Komkhumbi: If the product is damaged during shipping, please contact Easythreed customer service for free replacements.
- Usizo Lobuchwepheshe: For any operational issues, troubleshooting, or technical inquiries, please reach out to Easythreed's support team.
- Software & Models: Contact Easythreed for access to free 3D model downloads and additional technical tips related to slicing software and printer optimization.
For support, please visit the official Easythreed webisizindalwazi noma ubheke imininingwane yokuxhumana enikezwe emaphaketheni omkhiqizo wakho.
