Isingeniso
Thank you for choosing the Bubot 300P Robotic Pool Cleaner. This cordless pool vacuum is designed to provide efficient and hassle-free cleaning for above-ground flat pools up to 850 Sq.Ft. Featuring advanced Bluehole Tech for superior suction and DirtLock Tech 2.0 for leak-free debris containment, the Bubot 300P ensures a sparkling clean pool with minimal effort. Its smart sensing capabilities, auto-parking function, and intuitive LED indicator make pool maintenance simpler than ever.
Figure 1: The Bubot 300P Robotic Pool Cleaner.
Umhlahlandlela Wokusetha
1. Unboxing kanye nokuhlolwa kokuqala
Carefully remove all components from the packaging. Verify that all items listed in the packing list are present and undamaged. The package includes the Bubot 300P robot, pool robot charger, retrieval hook, floating handle, user manual, and two brushes.
2. Installing Brushes
Locate the two brushes provided. Attach them securely to the designated slots on the underside of the cleaner. Ensure they click into place firmly.
3. Charging the Cleaner
Before first use, fully charge the Bubot 300P. Connect the charger to the charging port located on the top of the unit. A full charge takes approximately 3 hours. The LED indicator will illuminate, signaling the charging status.
Figure 2: The Bubot 300P connected to its charger, indicating a 3-hour full charge time for up to 850 sq.ft pools.
4. Preparing for Deployment
Once fully charged, ensure the charging port cover is securely sealed to prevent water ingress. Attach the floating handle and retrieval hook to the cleaner as instructed in the user manual. This will aid in easy retrieval after cleaning.
Imiyalelo yokusebenza
1. Activating the Cleaner
Press the power button on the top of the Bubot 300P to activate it. The LED indicator will illuminate, signaling that the device is ready for operation.
2. Placing in the Pool
Gently submerge the cleaner into your pool. Allow it to sink to the bottom. The smart sensing technology will enable the robot to navigate and adjust direction upon wall contact, ensuring comprehensive coverage of your pool floor.
Figure 3: The Bubot 300P features self-parking technology and an LED indicator for instant feedback.
3. Automatic Cleaning Cycle
The Bubot 300P will automatically begin its cleaning cycle. It is designed for above-ground flat pools up to 850 Sq.Ft. The upgraded battery provides up to 90 minutes of continuous cleaning. The LED indicator offers clear status updates at a glance, including low battery warnings.
Figure 4: Cutting-edge sensing technology enables agile steering upon contact with the pool wall.
4. Auto-Parking Feature
When the battery is low, the Bubot 300P will intelligently navigate itself to the edge of the pool and park, making it easy for you to retrieve it.
Isondlo
1. Retrieving the Cleaner
Use the retrieval hook or the floating handle to pull the Bubot 300P out of the water. Thanks to DirtLock Tech 2.0, the cleaner drains all stored water with zero leakage in just 5 seconds, securely containing all debris, leaves, and fine sand.
Figure 5: Rapid water drainage with Bublue's new DirtLock™ technology secures containment of nearly 100% basket contents.
2. Ukuhlanza Isihlungi
Open the cleaner to access the internal filter basket. Remove the filter and rinse both the filter and the chassis thoroughly with a hose. Ensure all debris is removed before reassembling.
Figure 6: Easy maintenance by rinsing both the filter and chassis with a hose.
3. Storage and Battery Care
When not in use, it is recommended to charge the device every three months to avoid battery life degradation. Store the cleaner in a cool, dry place away from direct sunlight.
Ukuxazulula inkinga
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Cleaner does not turn on. | Low battery; charging port not sealed. | Charge the cleaner fully. Ensure charging port cover is securely sealed before use. |
| Cleaner is not moving or is stuck. | Obstruction; low battery; pool floor not flat. | Remove any debris obstructing the wheels or suction. Recharge the unit. Ensure pool is flat-bottomed as per specifications. |
| Poor suction or not picking up debris. | Full filter basket; clogged intake. | Empty and clean the filter basket. Check the suction intake for any blockages and clear them. |
| Cleaner does not auto-park. | Battery not low enough; sensor obstruction. | The auto-parking feature activates when the battery is critically low. Ensure sensors are clean and unobstructed. |
Imininingwane
| Isici | Imininingwane |
|---|---|
| Igama Lemodeli | I-Bubot 300P |
| Umthombo wamandla | Isebenza Ibhethri |
| Uhlobo Lwebhethri | I-Lithium-Ion (i-1 ifakiwe) |
| Battery Life (Operating Time) | Upgraded 90 minutes |
| Isikhathi sokushaja | Amahora angu-3 |
| I-Max Pool size | Up to 850 Sq.Ft (Above-Ground Flat Pools) |
| Suction Technology | Bluehole Tech |
| Debris Containment | DirtLock Tech 2.0 (Leak-Free Cleanup) |
| Ukuzulazula | Smart Sensing, Auto-Parking |
| Inkomba | Four-color LED |
| Isisindo sento | Amapondo ayi-10 (4.54 kg) |
| Ubukhulu bomkhiqizo | 6.87"L x 14.72"W x 13.77"H (17.45 x 37.39 x 34.98 cm) |
| Okubalulekile | Ipulasitiki |
| Umbala | Isiliva |
Iwaranti & Ukusekela
The Bubot 300P comes with a 1-year warranty for your peace of mind. For any questions, assistance, or support, please contact our customer service team. We offer 24/7 customer service to ensure you have a seamless experience with your product.
Ulwazi Olubalulekile Lokuphepha: Gcina idivayisi ikude nezingane.
