Isingeniso
This manual provides comprehensive instructions for the setup, operation, and maintenance of your ZEISS Secacam 7 Classic Trail Camera. Designed for observing wildlife, this camera captures high-quality photos and videos day and night. Please read this manual carefully before using the device to ensure optimal performance and longevity.
Umkhiqizo Uphelileview
The ZEISS Secacam 7 Classic is a robust trail camera featuring a wireless connection, a 32 GB SD card, and a color LCD display. It is equipped with an infrared flash and a light-sensitive photo sensor for clear recordings in various lighting conditions.
Umfanekiso 1: Ngaphambili View of ZEISS Secacam 7 Classic. This image shows the front of the trail camera, featuring its camouflage casing, lens, and infrared sensor.
Izingxenye Ezibalulekile:
- Ilensi: Ithwebula izithombe namavidiyo.
- Inzwa ye-infrared: Detects motion and triggers recording.
- Status Indicator & Light Sensor: Provides operational feedback and adjusts settings based on ambient light.
- LED Field (60 LEDs): Provides infrared illumination for night vision.
- Locking Clip: Secures the camera housing.
- Eylet for Attaching Locks: Allows for securing the camera against theft.
- 2.4" TFT-LCD Color Display: For menu navigation and viewukuqoshwa.
- Izinkinobho Zokulawula: ON/SETUP/OFF switch, OK, MENU, PLAY, and directional arrows for navigation.
Figure 2: Internal Display and Controls. This image displays the camera with its front cover open, revealing the 2.4-inch color LCD display and the control buttons for operation.
Setha
1. Ukufakwa kwebhethri
The ZEISS Secacam 7 Classic requires 8 AA batteries for operation. Ensure to use high-quality alkaline or rechargeable batteries.
- Open the camera's housing by releasing the locking clips.
- Thola indawo yebhethri.
- Insert 8 AA batteries, paying close attention to the correct polarity (+/-) indicated inside the compartment.
- Vala indawo yebhethri ngokuphephile.
Figure 3: Battery Installation. This image illustrates the process of inserting AA batteries into the camera's designated compartment.
2. Ukufaka ikhadi le-SD
A 32 GB SD card is included with your camera. This card is essential for storing photos and videos.
- With the camera housing open, locate the SD card slot, typically near the display.
- Insert the 32 GB SD card into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
- Ukuze ulikhiphe, phushela ikhadi ngobumnene lize liphume.
3. Ukukhweza Ikhamera
The camera can be mounted using the included mounting girdle.
- Select a suitable location, such as a tree or post, ensuring a clear view of the desired monitoring area.
- Thread the mounting girdle through the designated slots on the back of the camera.
- Securely fasten the girdle around the mounting surface.
- Open the camera's front flap to access the display. The lens is fixed to the front, allowing you to check the coverage area on the display and adjust the camera's angle for optimal positioning.
- Once positioned, close the front flap and secure the locking clips.
Figure 4: Camera Mounted (Closed). This image shows the camera securely attached to a tree, ready for operation.
Figure 5: Camera Mounted (Open for Alignment). This image demonstrates the camera mounted on a tree with its front cover open, allowing for precise alignment using the internal display.
Imiyalelo yokusebenza
Powering On/Off and Setup Mode
- To power on the camera and enter setup mode, slide the ON/SETUP/OFF switch to the "SETUP" position. The display will activate.
- To power off the camera, slide the switch to the "OFF" position.
- To activate the camera for monitoring, slide the switch to the "ON" position after completing setup. The status indicator will blink, and the camera will enter monitoring mode.
Ukuzulazula Kwemenyu
Use the directional arrow buttons (Phezulu, Phansi, Kwesobunxele, Kwesokudla) to navigate through menu options. Press the OK inkinobho yokuqinisekisa okukhethiwe. Cindezela inkinobho IMENU button to access the main menu or go back to the previous screen.
Ilungiselela Amasethingi
In "SETUP" mode, press the IMENU button to access various settings, including:
- Imodi: Select between Photo, Video, or Photo+Video.
- Isixazululo: Set image and video quality.
- Ukuzwela kwe-PIR: Adjust the motion sensor's sensitivity.
- Trigger Interval: Define the delay between consecutive recordings.
- Isikhathi Nosuku: Setha isikhathi samanje nedethi.
- Fometha ikhadi le-SD: Erase all data on the SD card. (Caution: This will delete all stored files.)
ViewUkuqoshwa
In "SETUP" mode, press the DLALA button to enter playback mode. Use the directional arrows to browse through captured photos and videos. Press OK ku view into ekhethiwe.
Isondlo
Ukuhlanza
- Wipe the camera's exterior with a soft, damp indwangu.
- For the lens and display, use a specialized lens cleaning cloth and solution to avoid scratches.
- Ensure all ports and seals are free of dirt and debris to maintain water resistance.
Ukushintshwa Kwebhethri
Replace batteries when the low battery indicator appears on the display or when performance degrades. Always replace all 8 batteries simultaneously with new ones.
Isitoreji
When not in use for extended periods, remove the batteries to prevent leakage and store the camera in a cool, dry place.
Ukuxazulula inkinga
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Ikhamera ayivuli. | Amabhethri afile noma afakwe ngokungalungile. | Check battery polarity, replace with fresh batteries. |
| No photos/videos captured. | SD card full, incorrectly inserted, or corrupted; PIR sensitivity too low; camera in OFF mode. | Format or replace SD card; adjust PIR sensitivity; ensure camera is in ON mode. |
| Ikhwalithi yesithombe ephansi ebusuku. | Infrared LEDs obstructed; low battery power. | Clear any obstructions from LEDs; replace batteries. |
| Isibonisi asisebenzi. | Camera not in SETUP mode; display settings. | Ensure switch is in SETUP position; check display brightness settings in menu. |
Imininingwane
| Isici | Imininingwane |
|---|---|
| Inombolo Yemodeli | ZEISS SECACAM 7 Classic |
| Bonisa | 2.4" TFT-LCD Color Display |
| Inzwa | Infrared Sensor, Light Sensor |
| Umbono Wasebusuku | 60 Black LEDs (Infrared Flash) |
| Included Memory | 32 GB Ikhadi le-SD |
| Ukuxhumana | Wireless, Matter Protocol |
| Umthombo wamandla | Battery Powered (8x AA) |
| Izinga Lokushisa Lokusebenza | -20 °C ~ 55 °C |
| Ubukhulu (LxWxH) | 14.3 x 12 x 7.5 Amasentimitha |
| Isisindo | 440 g |
| Ukulungiswa kokuthwebula ividiyo | 1080p |
| Uhlobo Lokukhweza | Isihlahla Sentaba |
| Ukusetshenziswa Kwangaphakathi/Kwangaphandle | Ngaphandle |
Iwaranti kanye Nokusekela
Your ZEISS Secacam 7 Classic Trail Camera comes with a standard manufacturer's warranty. An optional 1-year extended warranty may be available for purchase.
For technical support, service, or warranty claims, please contact ZEISS customer service.
- Umkhiqizi: ZEISS, Carl-Zeiss-Strasse 22, 73447 Oberkochen, Germany
- Umthekelisi (India): Carl Zeiss India (Bangalore) Pvt Ltd., Plot No. 3, Jigan Link Road, Bommasandra Industrial Area Bangalore 560099 India
- Idethi yokuqala yokutholakala: 3 Juni 2024
Sicela ugcine ubufakazi bakho bokuthenga ngezinjongo zewaranti.
