KTC G42P5/G48P5S Monitor Stand Set Instruction Manual

1. Umkhiqizo Uphelileview

This instruction manual provides comprehensive guidance for the assembly, operation, and maintenance of your KTC G42P5/G48P5S Monitor Stand Set. Designed for KTC 42/48 inch OLED gaming monitors, this robust metal stand offers stable support and enhanced viewukuguquguquka.

Izici Eziyinhloko:

• Gada Ukuhambelana: Specifically designed for KTC OLED gaming monitors G42P5 and G48P5S, supporting 42/48 inch displays.
• Immersive Ambient Lighting: Features ever-changing RGB lights to enhance the viewimvelo.
• Ergonomic Viewing: Offers -5° to +20° tilt adjustment for optimal ergonomic viewama-engeli.
• Effortless Cable Management: Integrated system helps maintain a clean and organized workspace.
• Ukufaka Okwenziwe Lula: Includes an open top slot VESA plate and all necessary hardware for quick and easy setup.

2. Okuqukethwe Kwephakheji

Sicela uqinisekise ukuthi zonke izingxenye zikhona ngaphambi kokuqala ukuhlanganisa:

• Monitor Stand Base (Tempered-glass)
• Monitor Stand Arm (Metal Column)
• VESA Mounting Plate (100x100mm compatible)
• Izinyawo Zerabha (4x)
• Izikulufu zesithupha (2x)
• Long Screws (M5x35mm)
• Short Screws (M5x15mm)
• Isikulufi
• U-Allen Wrenches
• Ikhebula Ukuphathwa Ukugunda

3. Ukusetha nokufakwa

3.1. Attach Rubber Feet to Base

Carefully place the monitor stand base on a clean, flat surface. Peel and adhere the four rubber feet to each corner on the underside of the base. This prevents scratching and provides stability.

3.2. Assemble Stand Arm to Base

Align the metal stand arm with the designated holes on the stand base. Secure the arm to the base using the two provided thumb screws. Ensure they are tightened firmly for stability.

3.3. Attach VESA Plate to Monitor

Locate the VESA mounting holes on the back of your KTC OLED monitor. Select the appropriate screws (M5x35mm or M5x15mm) based on your monitor's depth. Attach the VESA mounting plate to the monitor using these screws. If your monitor has recessed VESA holes, use the provided extenders if necessary to ensure a flush and secure fit.

Image: Easy installation diagram for attaching the VESA plate to the monitor.

3.4. Mount Monitor to Stand

Carefully slide the VESA plate, now attached to your monitor, into the open top slot of the stand arm. Ensure the monitor is fully seated and secure. Tighten any hand screws or locking mechanisms on the stand arm to prevent accidental dislodgement. Double-check all connections for tightness before use.

Image: KTC G42P5/G48P5S Monitor Stand with a monitor securely mounted.

4. Iziqondiso Zokusebenza

4.1. Ukulungisa Ukutsheka

The monitor stand allows for a tilt adjustment range of -5° to +20°. Gently push or pull the top or bottom edge of your monitor to achieve your desired viewing angle. Ensure the monitor remains stable after adjustment.

Image: Illustration of the monitor's tilt adjustment capability.

4.2. Adjusting Rotation

The monitor can be rotated 360° to switch between landscape and portrait orientations. Carefully rotate the monitor to your preferred orientation. Ensure the monitor is securely positioned after rotation.

4.3. Ukulungisa Ubude

The stand arm features fixed height positions. To adjust the monitor's height, you will need to loosen the hand screws on the stand arm, reposition the monitor to a different fixed slot, and then re-tighten the hand screws securely.

5. Ukuphathwa Kwentambo

Utilize the integrated cable management system to keep your workspace tidy. Route your monitor cables through the designated clips and channels on the stand arm to maintain a clean and organized setup.

Image: Detail of the cable management feature on the monitor stand.

6. Ambient Lighting

The monitor stand is equipped with ambient RGB lighting. These lights provide an immersive visual experience. Refer to your monitor's specific instructions for controlling the RGB lighting effects.

Image: KTC monitor stand with active ambient RGB lighting.

7. Imininingwane Yomkhiqizo

8. Ukuxazulula izinkinga

• Ukuzulazula Kwesikrini: Ensure all screws, especially those connecting the stand arm to the base and the VESA plate to the monitor, are tightened securely.
• Difficulty Adjusting Tilt/Height: Loosen the relevant hand screws or adjustment points before attempting to reposition. Re-tighten firmly after achieving the desired position.
• Scratches on Desk Surface: Verify that the rubber feet are properly attached to the stand base.

9. Amavidiyo Omkhiqizo Osemthethweni

10. Iwaranti kanye Nokusekela

For warranty information and technical support, please refer to the documentation included with your product or visit the official KTC webindawo. Gcina irisidi yakho yokuthenga ukuze uthole izimangalo zewaranti.