SCULPFUN S9 Laser Engraver Machine User Manual

Ulwazi Lokuphepha Olubalulekile

Operating a laser engraver requires strict adherence to safety guidelines to prevent injury and damage. Always read and understand all instructions before use.

• Ukuvikelwa Kwamehlo: Always wear the provided laser safety glasses when the machine is in operation. The laser filter cover on the S9 filters 98% of ultraviolet light, but direct exposure can still cause severe eye damage.
• Ingozi yomlilo: Laser engraving and cutting can generate heat and sparks, potentially causing fires. Never leave the machine unattended during operation. Ensure a fire extinguisher is readily available.
• Ukungenisa umoya: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving/cutting.
• Ukuphepha Kwezinto: Only engrave or cut materials specified as safe. Some materials can produce toxic fumes or catch fire easily.
• Ukuvikelwa kwendawo yokusebenza: Use the A4 steel pad provided to protect your work surface from laser damage and to isolate potential fire risks.
• Isitobhi Esiphuthumayo: Familiarize yourself with the location of the emergency power switch on the S9 machine for immediate shutdown.

The laser module features a protective cover to help filter harmful light, enhancing eye safety during operation.

A safety metal pad is included to protect your table from laser penetration and reduce fire risks.

Umkhiqizo Uphelileview

The SCULPFUN S9 is a high-performance laser engraver and cutter designed for precision work on a variety of materials. It features advanced laser beam shaping technology, an all-metal structure for stability, and a user-friendly fixed-focus design.

The SCULPFUN S9 machine, showcasing its robust design and examples of its engraving and cutting capabilities on different materials.

Izici Eziyinhloko

• Laser Beam Shaping Technology: Utilizes a 5.5W diode laser with an ultra-fine 0.06mm laser focus, providing a 90W CO2 laser effect for strong cutting penetration and fine engraving.
• Ukunemba okuphezulu: Achieves an engraving precision of 0.01mm, allowing for incredibly detailed work.
• Fixed-Focus Design: Features a combination of a fixed-focus lens and a sliding design for quick and easy focusing by simply moving the laser and tightening screws.
• Robust All-Metal Structure: Ensures extreme sturdiness and enhances engraving accuracy, designed for quick assembly within 10-20 minutes.
• Large Engraving Area: Offers a generous 410mm x 420mm working area to accommodate various project sizes.
• Ukuhambisana Okubanzi: Supports popular engraving software such as LaserGRBL, LightBurn, Benbox, Grbl Controller, and LiteFire, compatible with Windows and MAC systems, and various file formats (JPG, PNG, DXNF, SVG, G-Code, BC, BMP).

Okuningiliziwe view of the laser module, emphasizing its advanced laser beam shaping technology for superior performance.

Visual comparison illustrating the thinner, more effective energy range of the S9 laser compared to an ordinary square laser.

A magnified image demonstrating the ultra-thin, high-precision engraving line capability of the S9, as fine as 0.08mm.

Ukuhlanganisa nokusetha

The SCULPFUN S9 is designed for quick and straightforward assembly. Follow these general steps to set up your machine:

1. Khipha Izingxenye: Carefully remove all parts from the packaging and verify against the packing list.
2. Hlanganisa Uhlaka: Xhuma i-aluminium profiles to form the main frame of the engraver. The design allows for rapid assembly, typically within 10-20 minutes.
3. Install Laser Module: Mount the laser module onto the gantry. Ensure it is securely fastened.
4. Xhuma Amakhebuli: Attach all necessary power and data cables according to the provided diagrams.
5. Vula: Connect the power adapter and turn on the machine using the main power switch.

Visual guide illustrating the simple, step-by-step assembly process for the SCULPFUN S9.

Focusing the Laser

The S9 features a fixed-focus laser combined with a sliding design for easy focusing. To set the focus:

1. Place the material to be engraved or cut on the work surface.
2. Move the laser module down until the fixed-focus spacer (usually a small metal cylinder) touches the material surface.
3. Tighten the screws on the laser module to secure it in this position.
4. Remove the fixed-focus spacer. The laser is now correctly focused for your material.

Operating the SCULPFUN S9

Ukuhambisana Kwesoftware

The SCULPFUN S9 is compatible with a wide range of sophisticated engraving software, offering flexibility for your projects:

• I-LaserGRBL
• LightBurn (supports MAC system)
• Benbox
• Grbl Controller
• LiteFire

It supports PWM engraving mode and various file formats including JPG, PNG, DXF, SVG, G-Code, BC, and BMP.

The SCULPFUN S9 offers broad compatibility with popular laser engraving software, enhancing user flexibility.

Izinto Ezisekelwe

The S9 can engrave and cut a diverse range of materials:

• Izinto Zokuqopha: Wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, black stone.
• Izinto zokusika: Wood (up to 15mm thick), acrylic board (up to 10mm thick), cardboard, non-woven fabric, bamboo, certain plastic boards.

A visual display of the SCULPFUN S9's versatility, showing successful engraving and cutting on a wide array of materials.

Images demonstrating the S9's impressive cutting capabilities on thick materials like 15mm wood, 10mm plywood, and 10mm acrylic.

Izinyathelo Eziyisisekelo Zokusebenza

1. Lungiselela Idizayini Yakho: Create or import your design using your chosen engraving software. Adjust settings such as power, speed, and passes according to your material and desired outcome.
2. Indawo Material: Securely place your material on the work surface, ensuring it is flat and within the engraving area. Use the A4 steel pad underneath.
3. Set Focus: Follow the fixed-focus procedure described in the Setup section to ensure optimal laser focus.
4. Umshini Wokuxhuma: Connect the engraver to your computer via USB.
5. Qala umsebenzi: Initiate the engraving or cutting process from your software.
6. Gada inqubekelaphambili: Stay near the machine and monitor the process for any issues, especially fire hazards.
7. Cisha ugesi: Once the process is complete, turn off the machine and disconnect it from the power source.

Isondlo Nokunakekela

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 laser engraver.

• Clean Laser Lens: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain laser power and precision.
• Hlola Amabhande Nezinsika: Check the tension of the timing belts and ensure the guide rails are clean and free of debris. Lubricate rails if necessary, using appropriate lubricant.
• Ukuhlanza Okujwayelekile: Keep the machine free of dust and material residue. Use compressed air to clean hard-to-reach areas.
• Ukuvuselelwa kwe-Firmware: Hlola okomkhiqizi website for any available firmware updates to ensure your machine runs with the latest improvements.

Ukuxazulula Izinkinga Ezivamile

Lesi sigaba sinikeza izixazululo zezinkinga ezivamile ongase uhlangane nazo.

Imininingwane Yezobuchwepheshe

Iwaranti kanye Nokwesekwa Kwekhasimende

The SCULPFUN S9 Laser Engraver Machine comes with a standard manufacturer's warranty. Please refer to your purchase documentation or the retailer's webindawo yemigomo nemibandela ethile yewaranti.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact the manufacturer or your point of purchase. Keep your purchase receipt and model number (S9) handy when contacting support.