Mama Store Atena Wall Cabinet Instruction Manual

1. Ulwazi Olubalulekile Lokuphepha

Ukwehluleka ukulandela le miyalo yokuphepha kungaholela ekulimaleni noma ekulimaleni komkhiqizo.

• Install the cabinet on horizontal, stable surfaces. Irregular surfaces can cause stress, deformation, and mechanism failure.
• Avoid placing wet or hot objects directly on the cabinet surfaces. Clean any spills immediately with a soft, absorbent, slightly damp indwangu.
• Le fenisha ayiklanyelwe ukufakwa ngaphandle.
• The cabinet is designed to withstand normal humidity levels (steam, accidental splashes). Permanent exposure to high humidity will cause deterioration (swelling) and is not covered by warranty.
• Ukuze kuvinjelwe ukulimala okukhulu noma ukufa ekuweni noma ekuweni, ikhabethe kumele liqiniswe kahle odongeni.
• Wall mounting hardware (e.g., anchors, hooks, screws) provided may be indicative only. Always verify and replace hardware as needed based on your specific wall type and resistance. Consult a specialized professional for appropriate hardware selection.

2. Umkhiqizo Uphelileview

The Mama Store Atena Wall Cabinet, model AT006QUNA, is a double-door wall-mounted unit with integrated open compartments. It features a natural oak finish and is designed for versatile use in various rooms.

2.1 Izici

• Double doors with push-and-pull opening mechanism.
• Integrated open compartments for additional storage or display.
• Interior glass shelves behind doors.
• Exterior open compartment with a wooden shelf.
• Space-saving design with high storage capacity.
• Kulula ukuhlanza nokunakekela.
• Water-resistant material.

2.2 Ubukhulu

The cabinet measures approximately 71 cm in length, 22 cm in depth, and 71 cm in height.

2.3 Izinto ezibonakalayo

Constructed from selected, high-quality oak material with a natural oak finish.

Isithombe 1: Ngaphambili view of the Atena Wall Cabinet, highlighting its design and storage sections.

3. Ukusetha nokufakwa

The Atena Wall Cabinet arrives fully assembled, requiring only wall mounting.

3.1 Ukuhlola Ngaphambi Kokufaka

• Ensure the wall surface is clean, dry, and capable of supporting the cabinet's weight (approximately 17 kg).
• Verify that the wall is horizontal and even to prevent stress on the cabinet structure.
• Identify the exact mounting location, considering height and surrounding fixtures.

3.2 Imiyalelo Yokukhweza

1. Carefully unpack the cabinet and inspect for any damage.
2. Position the cabinet against the desired wall location and mark the drilling points for the mounting hardware.
3. Drill holes at the marked points using an appropriate drill bit for your wall type.
4. Insert suitable wall anchors (not always provided, verify suitability for your wall) into the drilled holes.
5. Align the cabinet's mounting brackets with the installed anchors and secure the cabinet to the wall using screws. Ensure all fixings are tight and the cabinet is stable.
6. After mounting, gently test the cabinet's stability by applying light pressure.

Image 2: Dimensional diagram of the Atena Wall Cabinet, illustrating its width, depth, and height for installation planning.

4. Ukusebenza

4.1 Ukuvula Nokuvala Iminyango

The cabinet doors feature a push-and-pull mechanism. To open, gently press the door panel until it releases, then pull it open. To close, push the door panel until it clicks securely into place.

4.2 Using Open Compartments

The open compartments are designed for easy access storage or display of items. Ensure items placed in these compartments do not protrude excessively to avoid accidental dislodgement.

5. Isondlo Nokunakekela

5.1 Imiyalo Yokuhlanza

To clean the cabinet, use a soft, slightly damp cloth. Avoid abrasive cleaners, harsh chemicals, or excessive water, as these can damage the finish. Wipe dry immediately after cleaning.

5.2 Ukunakekelwa Okuvamile

• Regularly check the wall fixings to ensure the cabinet remains securely mounted.
• Avoid exposing the cabinet to direct sunlight for prolonged periods to prevent fading.
• Do not overload the shelves or doors, as this can cause structural stress.

6. Ukuxazulula izinkinga

6.1 Doors Not Closing Properly

• Hlola Ukuqondanisa: Ensure the cabinet is installed on a perfectly horizontal and even surface. Uneven installation can cause doors to misalign.
• Inspect Hinges: Verify that the push-and-pull mechanisms and hinges are free from obstruction and properly engaged.
• Re-check Wall Fixings: Confirm the cabinet is securely mounted to the wall and has not shifted.

6.2 Cabinet Deformation or Swelling

• Ukuchayeka komswakamo: This typically indicates prolonged exposure to high humidity. Ensure the environment is suitable for furniture and avoid direct contact with water.
• Uneven Installation: As mentioned in safety, an uneven installation can cause stress leading to deformation.

7. Imininingwane

8. Iwaranti kanye Nokusekela

For information regarding warranty coverage or to obtain support for your Mama Store Atena Wall Cabinet, please refer to your purchase documentation or contact Mama Store customer service directly. Contact details can typically be found on the manufacturer's website or your original sales receipt.