FLOMEC TM10NQ9GMA

FLOMEC TM Series Water Meter (TM10NQ9GMA) User Manual

Model: TM10NQ9GMA | 1 inch FNPT

Isingeniso

This manual provides essential information for the proper installation, operation, and maintenance of your FLOMEC TM Series Water Meter, model TM10NQ9GMA. This meter is designed for accurate measurement of liquid flow in various applications, including water processing and irrigation. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Ulwazi Lokuphepha

  • Njalo gqoka izinto zokuzivikela ezifanele (i-PPE) ngesikhathi sokufakwa nokulungiswa.
  • Ensure the system is depressurized and drained before attempting any installation or service.
  • Do not exceed the specified pressure and temperature ratings of the meter.
  • Verify proper sealing of all connections to prevent leaks.
  • Keep batteries out of reach of children. Dispose of batteries according to local regulations.

Umkhiqizo Uphelileview

The FLOMEC TM Series Water Meter is an economical and robust solution for liquid flow measurement. It features a durable schedule 80 PVC housing and a local display that provides real-time flow rate, accumulated total, and a resettable total. The meter supports three engineering units: Gallons, Liters, and Cubic Feet. It is factory-calibrated and battery-operated for ease of use.

Diagram of FLOMEC TM Series Water Meter display with labeled components
Umfanekiso 1: Labeled diagram of the FLOMEC TM Series Water Meter display, indicating the Rate button, Total button, Flow indicator, Units, Batch indicator, Batch Total, Cumulative Total, Flowrate, Floating Decimal Point (3 places), Factory Calibration Indicator, Total Spillover Indicator (X10 / X100), and Total Indicator.

Ukusetha nokufaka

The TM10NQ9GMA model features 1-inch Female NPT fittings for straightforward integration into your piping system. Proper installation is crucial for accurate readings and long-term performance.

Izinyathelo zokufaka:

  1. Prepare the Piping: Ensure the pipe section where the meter will be installed is clean and free of debris. The meter requires a straight run of pipe before and after for optimal accuracy.
  2. Orient the Meter: Observe the flow direction arrow on the meter body. Install the meter so that the arrow aligns with the direction of liquid flow in your system.
  3. Connect Fittings: Apply appropriate thread sealant (e.g., PTFE tape or pipe dope) to the 1-inch Male NPT threads of your piping. Carefully thread the meter onto the pipe fittings. Do not overtighten, as this can damage the PVC housing.
  4. Hlola Ukuvuza: Slowly pressurize the system and inspect all connections for leaks. Tighten as necessary.
  5. Ukufakwa Kwebhethri: The meter comes with two AAA alkaline batteries pre-installed. If replacement is needed, refer to the Maintenance section.
FLOMEC TM Series Water Meter with 1 inch FNPT fittings
Umfanekiso 2: The FLOMEC TM Series Water Meter, showing its compact design and 1-inch FNPT connections.
FLOMEC TM Series Water Meter installed in a pipe
Umfanekiso 3: Umuntu wakudalaample of the FLOMEC TM Series Water Meter properly installed in a pipeline, demonstrating correct orientation with the flow.

Imiyalelo yokusebenza

The FLOMEC TM Series Water Meter is designed for simple operation with its intuitive display and two-button interface.

Khombisa Imisebenzi:

  • Isilinganiso sokugeleza: Shows the instantaneous flow rate of the liquid.
  • Ingqikithi yenani: Displays the cumulative total volume of liquid that has passed through the meter since its initial installation. This total is non-resettable.
  • Ingqikithi Engasetha kabusha: Displays a total volume that can be reset for batching or specific measurement periods.

Imisebenzi Yenkinobho:

  • RATE Button: Press to cycle through display modes, typically showing flow rate.
  • TOTAL Button: Press to cycle through totalizer modes (Grand Total, Resettable Total). Hold to reset the Resettable Total.

Ukushintsha amayunithi:

The meter supports Gallons, Liters, and Cubic Feet. Refer to the detailed programming instructions in the full product manual (if available) for specific steps on how to change the displayed units. Typically, this involves a combination of button presses during power-up or a specific menu sequence.

Isondlo

Regular maintenance ensures the longevity and accuracy of your FLOMEC TM Series Water Meter.

Ukushintshwa Kwebhethri:

The meter operates on two AAA alkaline batteries. When the battery indicator appears on the display, it is time to replace them.

  1. Ensure the system is depressurized and the meter is accessible.
  2. Locate the battery compartment on the top of the display unit.
  3. Carefully remove the screws securing the battery cover.
  4. Remove the old AAA batteries and insert two new AAA alkaline batteries, observing correct polarity.
  5. Replace the battery cover and tighten the screws to ensure a watertight seal.
FLOMEC TM Series Water Meter with two AAA batteries shown
Umfanekiso 4: The FLOMEC TM Series Water Meter, illustrating the location of the battery compartment and the two AAA alkaline batteries required.

Ukuhlanza:

Periodically clean the exterior of the meter with a damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the housing or display.

Ukuxazulula inkinga

If you encounter issues with your FLOMEC TM Series Water Meter, refer to the following common troubleshooting steps:

InkingaImbangela EngenzekaIsixazululo
Asikho isibonisi noma isibonisi esifipheleAmabhethri afile noma aphansiReplace batteries with new AAA alkaline batteries.
Ukufundwa okunganembileIncorrect installation (e.g., wrong flow direction, insufficient straight pipe run)Verify meter orientation and ensure adequate straight pipe sections before and after the meter.
No flow reading despite liquid flowObstruction in the meter or sensor issueDepressurize and inspect the meter for any blockages. If the issue persists, contact technical support.
Ukuvuza ekuxhumekeniImproperly sealed threads or damaged fittingsDepressurize, reapply thread sealant, and retighten connections. Inspect fittings for damage.

For issues not covered here, please contact FLOMEC customer support.

Imininingwane

Detailed technical specifications for the FLOMEC TM Series Water Meter (TM10NQ9GMA).

IsiciUkucaciswa
Inombolo YemodeliTM10NQ9GMA
Uhlobo Lokufaka1 inch Female NPT
Ibanga Lokugeleza Kwezinga5 to 50 Gallons Per Minute (19 to 190 Liters Per Minute)
Ukunemba±3.0% wokufunda
Isilinganiso sokucindezela225 PSI at 73°F (pressure rating reduces with higher temperature)
I-Operating Temperature Range32°F ukuya ku-140°F (0°C ukuya ku-60°C)
Bonisa AmayunithiGallons, Liters, Cubic Feet
Umthombo wamandla2 x AAA Amabhethri ane-alikhali
Ubukhulu bephakheji8.98 x 4.17 x 3.94 amayintshi
Isisindo sento1 Pondo
UmkhiqiziGreat Plains Industries
Diagram showing dimensions and key specifications of the FLOMEC TM Series Water Meter
Umfanekiso 5: Visual representation of the FLOMEC TM Series Water Meter's dimensions and key specifications, including fitting type, flow range, accuracy, and operating temperature range.

Iwaranti kanye Nokusekela

The FLOMEC TM Series Water Meter is manufactured by Great Plains Industries. For specific warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official FLOMEC webisayithi. Kunconywa ukuthi ugcine ubufakazi bakho bokuthenga ukuze uthole izimangalo zewaranti.

Amadokhumenti Ahlobene - TM10NQ9GMA

Ngaphambiliview I-FLOMEC QS100 Ultrasonic Flow Sensor Umhlahlandlela Wokufaka
Imiyalo enemininingwane yokufaka ye-FLOMEC QS100 Ultrasonic Flow Sensor, ehlanganisa izidingo zengxenye, izintambo, nokubekwa okufanele kwezinhlelo zokunisela. Kufaka phakathi imidwebo namanothi okusebenza.
Ngaphambiliview I-FLOMEC QS100-10 In-line Irrigation Ultrasonic Flowmeter Incwadi Yomnikazi Womkhiqizo
Le manuwali inikeza imiyalelo ye-FLOMEC QS100-10 In-line Irrigation Ultrasonic Flowmeter, ehlanganisa izidingo zokusetshenziswa, ukuphepha, imininingwane, ukufakwa, ukusebenza, ukuxazulula izinkinga, nolwazi lwewaranti.
Ngaphambiliview I-FLOMEC QSI Electronics ye-QSE Mag Meters - Incwadi Yomnikazi Womkhiqizo
Imanuwali ebanzi yomnikazi womkhiqizo wamamojula we-elekthronikhi we-FLOMEC QSI (QSI1, QSI2, QSI3) asetshenziswa ne-QSE Mag Meters, ukufakwa okumboza, izintambo, imininingwane, ukugcinwa, kanye newaranti.
Ngaphambiliview I-FLOMEC EB11 'EasyBatch' Dual Stage I-Batch Controller Datasheet
Ukucaciswa okuningiliziwe nokucushwa komkhiqizo we-FLOMEC EB11 'EasyBatch' dual stagIsilawuli se-e, esidizayinelwe ukukhipha uketshezi okusebenzayo nokunembe nge-IP66/67 NEMA4X ebiyelwe.
Ngaphambiliview I-FLOMEC TM Series Incwadi Yomsebenzisi Ye-Electronic Water Flowmeters
Imanuwali ebanzi yomsebenzisi ye-FLOMEC TM Series Electronic Water Flowmeters (amamodeli amayintshi angu-3 namayintshi angu-4 TM30XXXXXX, TM40XXXXXX). Ihlanganisa ukufakwa, ukusebenza, ukunakekelwa, ukucaciswa, kanye nokuxazulula izinkinga ngokulinganisa okuthembekile kokugeleza kwamanzi.
Ngaphambiliview Imanuwali Yomnikazi Womkhiqizo we-FLOMEC 4-20mA
Imanuwali ebanzi yomnikazi ye-FLOMEC 4-20mA Module, enemininingwane ecacisiwe, ukufakwa, izintambo, ukusebenza, ukulinganisa, nokuxazulula izinkinga ukuze kusetshenziswe namamitha ophephela e-FLOMEC.