I-alamu yedijithali ebukhali ene-AccuSet - Incwadi Yomsebenzisi Yewashi Elihlakaniphile Elizenzakalelayo

Isingeniso

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Iwashi le-alamu ledijithali elibukhali, ngaphambili view, showing red LED display with time 12:08.

Umfanekiso 1: Ngaphambili view of the Sharp Digital Alarm Clock.

Izici Zomkhiqizo

AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
High/Low Dimmer Control: Ukukhanya kwesibonisi okungalungiseka.
Ibhethri Eyisipele: Pre-installed CR2032 battery for time settings retention during power outages.
Ukukhetha Indawo Yesikhathi: Easily select your local time zone.

Diagram showing key features of the Sharp Digital Alarm Clock: Large 0.9 inch Red LED Display, AccuSet Automatic Time Setting, High & Low Display Dimmer Control, Easy Set Top Button Controls, and Installed Battery Backup.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Setha

1. Initial Power-Up and Time Zone Selection

Locate the time zone switch on the bottom of the clock.
Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

To adjust for Daylight Savings Time:

Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
For Standard Time, slide the switch to VALIWE to subtract one hour (-1 hr).

3. Isipele sebhethri

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Imiyalelo yokusebenza

Phezulu view of the Sharp Digital Alarm Clock showing button labels: DIMMER HI/LO, TIME SET, ALARM SET, SNOOZE, HOUR SET, MINUTE SET, ALARM ON/OFF. Also indicates PM indicator and ALARM indicator on the display.

Figure 3: Top panel controls and display indicators.

1. Ukubeka i-Alamu

Cindezela inkinobho ISILUNGISELELO SE-ALMU button once. The alarm time will flash on the display.
Cindezela inkinobho IHORA ISETHIWE button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
Cindezela inkinobho IMIZUZU ISEthiwe inkinobho ukulungisa iminithi le-alamu.
Cindezela inkinobho ISILUNGISELELO SE-ALMU button again to confirm and exit alarm setting mode.

2. Turning Alarm On/Off

To turn the alarm ON, cindezela i I-ALMU IVULIWE / IVALIWE button. The alarm indicator light on the display will illuminate.
To turn the alarm VALIWE, cindezela i I-ALMU IVULIWE / IVALIWE button again. The alarm indicator light will turn off.

3. Snuza Umsebenzi

Uma i-alamu ikhala, cindezela enkulu SNOZA inkinobho etholakala phezulu kwewashi. I-alamu izoma okwesikhashana bese iphinda ikhale ngemva kwemizuzu engaba ngu-9.

4. Dimmer Control

Ukuze ulungise ukukhanya kwesibonisi se-LED:

Cindezela inkinobho DIMMER HI/LO inkinobho yokushintsha phakathi kwezilungiselelo zokukhanya okuphezulu nokuphansi.

Eduze view of the Sharp Digital Alarm Clock display, highlighting the high and low dimmer control feature.

Figure 4: Display brightness adjustment.

Isondlo

Battery Replacement (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.

Unplug the clock from the electrical outlet.
Locate the screw-secured battery compartment on the bottom of the clock.
Unscrew the compartment cover and carefully remove the old CR2032 battery.
Faka ibhethri elisha le-CR2032, uqinisekise i-polarity efanele (+ side up).
Shintsha isembozo segumbi bese usiqinisa ngesikulufu.
Plug the clock back into the electrical outlet.

Qaphela: Lahla amabhethri amadala ngokuzibophezela ngokwemithetho yendawo.

Ukuxazulula inkinga

Inkinga	Imbangela Engenzeka	Isixazululo
Clock display is blank.	Awekho amandla.	Ensure the clock is securely plugged into a working electrical outlet. Check the power source.
Isikhathi asilungile.	Incorrect time zone selected; DST switch incorrect; Power interruption.	Verify the time zone switch on the bottom of the clock. Check the DST switch position. If power was interrupted, the AccuSet should reset the time; if not, check/replace backup battery.
I-alamu ayizwakali.	I-alamu ayicushiwe; Isikhathi se-alamu sisethiwe.	Ensure the alarm indicator light is on (press ALARM ON/OFF button). Verify the alarm time is set correctly.
Isibonisi sikhanya kakhulu/sifiphele.	Ukusethwa kwe-dimmer kudinga ukulungiswa.	Press the DIMMER HI/LO button to cycle through brightness settings.

Imininingwane

Ibhrendi: Ibukhali
Imodeli: B089ZMSR39
Umbala: Black-red Led
Uhlobo lokubonisa: Idijithali
Isici esikhethekile: Ukusetha Okuzenzakalelayo
Ubukhulu bomkhiqizo: 5.5"W x 2.6"H
Umthombo wamandla: I-Corded Electric
Ibhethri lekhophi yasenqolobaneni: 1 x CR2032 Lithium Ion (included)
Isisindo Sento: 10.2 Amawunsi
I-UPC: 049353004426
Umkhiqizi: Ibukhali

Diagram showing the dimensions of the Sharp Digital Alarm Clock: 5.5 inches wide, 2.6 inches high, and 2.45 inches deep. The display size is 0.9 inches.

Umfanekiso 5: Ubukhulu bomkhiqizo.

Ulwazi Olwengeziwe

For further assistance or product inquiries, please refer to the official Sharp webisayithi noma uxhumane nokwesekwa kwamakhasimende abo.

Lo mkhiqizo uklanyelwe ukusetshenziswa endlini kuphela.

	SHARP Atomic Wall Clock: Setup, Features, and Manual Comprehensive instruction manual for the SHARP Radio Controlled Atomic Wall Clock (Model SPC876), covering setup, time zone settings, DST, signal reception, manual setting, and warranty information.
	Sharp Atomic Clock SPC1019 Instructions and Warranty User manual and warranty information for the Sharp Atomic Clock SPC1019, detailing setup, time setting, alarm functions, and troubleshooting.
	SHARP SPC971 Atomic Wall Clock User Manual and Instructions Detailed instructions and safety information for the SHARP SPC971 Atomic Wall Clock, covering setup, battery replacement, and operation.
	Sharp SPC1003/1005 Atomic Weather Station User Manual Comprehensive guide for the Sharp SPC1003/1005 Atomic Weather Station, detailing features, setup, controls, and specifications for accurate time, weather, and environmental monitoring.
	Sharp Atomic Wall Clock SPC971: Instructions and Warranty User manual and warranty information for the Sharp Atomic Wall Clock (Model SPC971), detailing setup, features, and one-year limited warranty.
	Sharp SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds: User Guide Comprehensive guide to operating the Sharp SPC276 Digital Alarm Clock, covering features, setup, alarm functions, Bluetooth connectivity, sleep sounds, and safety precautions.

Sharp B089ZMSR39