Isingeniso
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics Outdoor Wall Lantern with Integrated LED and Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference.
Ulwazi Lokuphepha
ISEXWAYISO: Ubungozi Bokushaqeka Kukagesi.
- Always turn off the power at the circuit breaker or fuse box before installation, servicing, or changing any part of the fixture.
- Xhumana nosebenza ngogesi oqeqeshiwe uma ungaqiniseki ngenqubo yokufaka.
- Ensure all electrical connections are made according to local codes and ordinances.
- Ungazami ukushintsha isikimu. Noma yikuphi ukuguqulwa kungase kuqede iwaranti futhi kudale ingozi yokuphepha.
- This fixture is designed for outdoor use. Ensure proper sealing against moisture.
Okuqukethwe Kwephakheji
Qinisekisa ukuthi zonke izingxenye zikhona ngaphambi kokuqala ukufakwa.
- Outdoor Wall Lantern with Integrated LED
- I-Mounting Bracket
- Izikulufa zokukhwela
- Amantongomane Wocingo
- Incwadi Yeziqondiso
Image: The outdoor wall lantern shown with its mounting bracket, screws, and wire nuts.
Ukusetha nokufaka
- Lungiselela Ukufakwa: Turn off power at the main circuit breaker. Ensure the power is off before proceeding.
- Susa i-Old Fixture (uma ikhona): Carefully disconnect and remove any existing light fixture.
- Namathisela Ubakaki Wokukhweza: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is level and firmly attached.
- Yenza ukuxhuma kukagesi:
- Xhuma i- mnyama wire kusuka ku-fixture kuya ku- mnyama (okushisa) ucingo olusuka ebhokisini lokuhlangana lisebenzisa inadi locingo.
- Xhuma i- mhlophe wire kusuka ku-fixture kuya ku- mhlophe (engathathi hlangothi) intambo esuka ebhokisini lokuhlangana kusetshenziswa inadi locingo.
- Xhuma i- phansi wire kusuka ku-fixture kuya ku- phansi wire from the junction box (or to the green ground screw on the mounting bracket) using a wire nut.
Qinisekisa ukuthi konke ukuxhumana kuvikelekile futhi akukho ntambo engenalutho eveziwe.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure a tight seal against the wall to prevent moisture intrusion.
- Buyisela Amandla: Vula amandla futhi ku-circuit breaker.
Isithombe: Ngaphambili view of the installed outdoor wall lantern, showing its design and integrated LED.
Isithombe: Side view of the outdoor wall lantern, highlighting its upward-facing design and motion sensor at the base.
Imiyalelo yokusebenza
This outdoor wall lantern features an integrated motion sensor for automatic illumination.
Ukusebenza Kwenzwa Yokunyakaza
- The motion sensor has a 120-degree detection angle and an 8-meter range.
- The light will activate when motion is detected within its range, typically at dusk or in low-light conditions.
- The duration the light stays on after motion detection can often be adjusted. Refer to the sensor's specific controls, usually small dials or switches located on the sensor itself, for time and sensitivity settings.
Isithombe: Ukuvala view of the motion sensor located at the base of the lantern, showing its dome-shaped lens.
Ukulungisa Izilungiselelo Zenzwa
The motion sensor typically has adjustable settings for sensitivity (how easily it detects motion) and time (how long the light stays on after detection). These adjustments are usually made via small dials on the sensor unit. Use a small screwdriver to carefully turn these dials to your desired settings.
Image: The outdoor wall lantern installed on a dark garage wall, providing illumination to the area below.
Isondlo
- Ukuhlanza: Hlanza into ethambile, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or plastic components.
- I-LED ehlanganisiwe: Umthombo wokukhanya we-LED uhlanganisiwe futhi awubuyiseleki umsebenzisi. Uma i-LED ihluleka, yonke into ingase idinge ukushintshwa.
- Ukuhlola: Periodically inspect the fixture for any signs of damage, loose connections, or wear.
Ukuxazulula inkinga
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Ukukhanya akukhanyi. |
|
|
| Ukukhanya kuhlala kuvuliwe. |
|
|
| Ukukhanya kuyakhanya noma kuyakhanya. |
|
|
Imininingwane
| Isici | Imininingwane |
|---|---|
| Inombolo Yemodeli | G10021P-NA |
| Ubukhulu (L x W x H) | 11.5" x 8.7" x 6.3" |
| Umthombo wamandla | I-AC 120V |
| Wattage | 11W (Integrated LED) |
| Umbala Okhanyayo | Okumhlophe Okufudumele (3000 Kelvin) |
| Okubalulekile | Aluminum (Fixture), Plastic (Shade) |
| Qeda | Mnyama |
| Ibanga Lenzwa Yokunyakaza | 120 degrees / 8 meters |
| Ukusetshenziswa Kwangaphakathi/Kwangaphandle | Ngaphandle |
Iwaranti
This Amazon Basics Outdoor Wall Lantern is covered by a Iwaranti yonyaka ongu-3 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from accident, misuse, abuse, improper installation, or unauthorized repair.
For warranty claims, please retain your proof of purchase and contact customer support.
Ukwesekwa Kwamakhasimende
For technical assistance, troubleshooting, or warranty inquiries, please visit the Amazon Basics support page or contact Amazon customer service directly.
Ukusekelwa Kwe-inthanethi: Isitolo Sezisekelo ze-Amazon
