KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Isingeniso

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Isithombe: Ngaphambili view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Ukusetha nokuhlela

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Izinyathelo Zokuhlela:

1. Open the driver's side door of your vehicle.
2. Insert the key into the ignition and turn it to the ON position. Do not start the engine.
3. Locate the Viper system's control button (often a small button with a blue LED indicator).
4. Cindezela inkinobho yokulawula kasikhombisa. Use eighth press, hold the button down until the car chirps.
5. While still holding the control button, press the Khiya button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
6. Khipha inkinobho yokulawula.
7. Vula ukhiye wokuthungela ku- VALIWE beka bese uyisusa.
8. Close the driver's side door.
9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Ividiyo: Isiqephu esifushaneview of KeylessOption Key Fob Remotes for Viper systems.

Imiyalelo yokusebenza

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

• Inkinobho yokukhiya: Press to lock your vehicle's doors and arm the alarm system.
• Inkinobho yokuvula: Press to unlock your vehicle's doors and disarm the alarm system.
• Inkinobho ye-AUX: This button typically controls auxiliary functions, such as opening the trunk or activating a remote start feature, depending on your Viper system's configuration. Refer to your Viper system's manual for specific AUX button functionality.
• Panic Button (*): Press and hold this button to activate the vehicle's panic alarm. Press again to deactivate.

Isithombe: Engela view of the KeylessOption Key Fob, highlighting its ergonomic design.

Isondlo

Ukushintshwa Kwebhethri:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

1. Carefully separate the two halves of the remote casing using a small flat-head screwdriver or a prying tool.
2. Remove the old battery. Note its orientation (+/- sides).
3. Insert the new battery with the correct orientation.
4. Snap the remote casing buyelani ndawonye ngokuphepha.

Isithombe: Emuva view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

Ukuxazulula inkinga

• Isilawuli kude asiphenduli: Ensure the battery is fresh and correctly installed. Re-attempt the programming steps carefully. Verify the FCC ID on your original remote matches EZSDEI7141.
• Ububanzi obulinganiselwe: Replace the battery. Ensure there are no obstructions between the remote and the vehicle's antenna.
• Vehicle not chirping during programming: Double-check that the ignition is in the ON position (not ACC or START). Confirm you are pressing the Viper control button the correct number of times and holding it on the last press until a chirp is heard.

Imininingwane

Iwaranti kanye Nokusekela

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webindawo.

Image: KeylessOption Warranty Card, included with each purchase.