Isingeniso
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ergotron MXV Dual Monitor Arm. Designed for efficiency and ergonomic comfort, this VESA desk mount supports two monitors, enhancing your workspace.
Izici Eziyinhloko:
- Ukuhambisana Okubanzi: Supports two screens up to 24 inches diagonal, each weighing between 7 to 20 pounds. Compatible with VESA patterns 75x75mm and 100x100mm.
- Full Monitor Movement: Offers 13 inches of lift, 360 degrees of rotation, and 180 degrees of tilt for optimal viewama-engeli.
- Ukufaka Okulula: Includes a two-piece desk clamp suitable for desktops 0.47 to 1.25 inches thick.
- Ukuphathwa Kwekhebula Okudidiyelwe: Thoughtful design to keep your workstation neat and organized.
- Ukwakhiwa Okuqinile: Built to withstand rigorous use, ensuring stability and security for your monitors.
Okuqukethwe Kwephakheji
Qinisekisa ukuthi zonke izingxenye zikhona ngaphambi kokuqala ukufakwa.
Image: All components of the Ergotron MXV Dual Monitor Arm, including the main arm assembly, VESA plates, desk clamp parts, and various screws and tools, are laid out on a white surface.
- I-Dual Monitor Arm Assembly
- Two VESA Mounting Plates
- Two-piece Desk Clamp
- Ihadiwe Yokufaka (izikulufo, amawasha)
- Hex Keys for adjustment
- Ikhebula Ukuphathwa Ukugunda
Setha Imiyalelo
Follow these steps to properly install your Ergotron MXV Dual Monitor Arm.
1. Prepare Your Workspace
Ensure your desk is clear and stable. The desk clamp requires a desktop thickness between 0.47 to 1.25 inches (1.2 to 3.2 cm).
Image: A diagram illustrating the compatible desk thickness for the clamp, ranging from 0.47 to 1.25 inches (1.2 to 3.2 cm).
2. Namathisela i-Desk Clamp
- Position the two-piece desk clamp on the edge of your desk where you intend to mount the arm.
- Qinisekisa ngokuphepha i-clamp using the provided hardware until it is firmly attached to the desk. Do not overtighten.
- For desks with a grommet hole, an accessory grommet mount (Ergotron part 98-111) is available separately.
3. Mount the Monitors
- Attach the VESA mounting plates to the back of each monitor using the appropriate screws from the hardware kit. Ensure the VESA pattern (75x75mm or 100x100mm) matches your monitor.
- Carefully slide each monitor, with its attached VESA plate, onto the corresponding arm attachment point. Ensure it clicks securely into place.
- Verify that both monitors are securely fastened to the arm.
Isithombe: Ingemuva view of two monitors securely mounted on the Ergotron MXV Dual Monitor Arm, showcasing the VESA attachment points and the arm's structure.
Imiyalelo yokusebenza
The Ergotron MXV Dual Monitor Arm allows for flexible positioning to optimize your viewisipiliyoni.
Ukulungisa Indawo Yesiqaphi
- Ukulungiswa kobude: Gently lift or lower the monitors to achieve the desired height. The arm provides 13 inches (33 cm) of vertical lift.
- Ukuzungezisa: Rotate the monitors 360 degrees for portrait or landscape viewing.
- Ukutsheka: Tilt the monitors up or down by 180 degrees (90 degrees up, 90 degrees down) to reduce glare and improve viewinduduzo.
- Isinkwa: Move the monitors horizontally across your workspace.
Image: A multi-panel diagram showing the various adjustments possible with the monitor arm, including 180-360 degree arm rotation, 360-degree monitor rotation, 13 inches (33 cm) of vertical lift, and 90 degrees up/down tilt.
Ukuphathwa Kwekhebula
Route monitor cables through the integrated cable management channels on the arm to maintain a tidy workspace.
Isithombe: A phezulu phansi view of two monitors mounted on the arm, highlighting how cables are neatly routed through the arm's integrated management system.
Isondlo
Ukugcinwa njalo kuqinisekisa ukuthi ingalo yakho yesikrini ihlala isikhathi eside futhi isebenza kahle.
- Ukuhlanza: Sula izindawo ezingalweni ngomshini othambile, damp indwangu. Gwema izinto zokuhlanza abrasive.
- Ukuhlola Ukuqina: Periodically check all screws and connections, especially the desk clamp and VESA plate attachments, to ensure they remain secure. Tighten if necessary using the provided hex keys.
- Ukuhlola Ukunyakaza: Ensure the arm moves smoothly. If movement becomes stiff or loose, refer to the troubleshooting section or contact support.
Ukuxazulula inkinga
Izinkinga ezivamile nezisombululo zazo.
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Isikrini siyawa noma asibambeki endaweni yaso. | Tension adjustment is too loose for monitor weight. | Adjust the tension screw on the arm using the appropriate hex key until the monitor holds its position. Refer to the product's quick start guide for specific tension adjustment points. |
| Arm movement is too stiff. | Tension adjustment is too tight. | Loosen the tension screw slightly until movement is smooth. |
| Iziqaphi azikho ezingeni. | Minor misalignment during installation or adjustment. | Adjust the tilt and rotation mechanisms on the VESA plate to fine-tune monitor alignment. |
| Ideski clamp feels unstable. | Clamp not tightened sufficiently or desk thickness incompatible. | Qinisekisa ideski clamp is fully tightened. Verify your desk thickness is within the specified range (0.47-1.25 inches). |
Imininingwane
| Isici | Imininingwane |
|---|---|
| Inombolo Yemodeli | 45-496-224 |
| Ubukhulu bomkhiqizo | 32.08 x 12.16 x 7.56 amayintshi |
| Isisindo sento | 14.7 amakhilogremu |
| Ukuhambisana Kosayizi Wesibuko | Up to 24 inches diagonal (each) |
| Monitor Weight Capacity | 7 to 20 pounds (each) |
| Ukuhambisana kwe-VESA | 75x75mm, 100x100mm |
| Ideski Clamp Ubukhulu | 0.47 kuya ku-1.25 amayintshi (1.2 kuya ku-3.2 cm) |
| Phakamisa | 13 amayintshi (33 cm) |
| Ukuzungezisa | 360 degrees |
| Tshekisa | 180 degrees (90 degrees up/down) |
| Okubalulekile | I-Aluminium |
| Umbala | I-Matte Black |
| Umkhiqizi | Ergotron |
| I-UPC | 698833073867 |
Iwaranti kanye Nokusekela
Ergotron products are designed for durability and come with comprehensive support.
- Isiqinisekiso: This product is backed by a 10-year warranty, reflecting Ergotron's commitment to quality and reliability.
- Ukusekela kwezobuchwepheshe: For technical assistance, troubleshooting, or warranty claims, please visit the official Ergotron support webisayithi noma uxhumane nesevisi yabo yamakhasimende.
- Izinsiza eziku-inthanethi: Additional resources, including detailed installation guides and FAQs, may be available on the Ergotron webindawo.
