Isingeniso
Thank you for choosing the Znewtech Home & Office Timer with Clock. This innovative digital timer is designed to enhance your time management and productivity, whether for work, study, or daily tasks. Its intuitive design allows for quick and easy setup and operation, featuring preset countdown times and a clear LCD display.
Izici ezibalulekile zifaka:
- A stylish and innovative digital desk timer with clock functionality.
- Simple operation: turn the timer to its desired preset position to start a countdown.
- Clear LCD screen displaying the remaining countdown time.
- Adjustable volume control with three levels: High, Low, and Silent.
- Flashing backlit visual alert for discreet notifications.
Okuqukethwe Kwephakheji
Sicela uqinisekise ukuthi zonke izinto zikhona kuphakheji yakho:
- 1 x Znewtech Home & Office Timer (Cyan)
- 1 x Incwadi Yomsebenzisi
Setha
Ukufakwa Kwebhethri
The Znewtech Timer requires 2 AAA batteries (not included). To install:
- Thola indawo yebhethri ngemuva kwesibali sikhathi.
- Gently slide open the battery cover.
- Faka amabhethri angu-2 AAA, uqinisekisa ukuvuleka okulungile (+/-) njengoba kukhonjisiwe ngaphakathi kwekhompathimenti.
- Vala ikhava yebhethri ngokuphephile.
Isithombe: Emuva view of the timer, highlighting the battery compartment and control buttons for setup.
Ukusetha Iwashi
After installing batteries, the clock display will activate. To set the time:
- Cindezela inkinobho SET button on the back of the timer to enter time setting mode. The hour digits will flash.
- Sebenzisa i- UP futhi PHANSI izinkinobho ukulungisa ihora.
- Cindezela SET again to move to minute setting. The minute digits will flash.
- Sebenzisa i- UP futhi PHANSI izinkinobho ukulungisa amaminithi.
- Cindezela SET kanye futhi ukuqinisekisa nokuphuma kwimodi yokusetha isikhathi.
- Ukushintsha phakathi kwefomethi yamahora angu-12 kanye namahora angu-24, cindezela inkinobho IMODE button while in clock display mode.
Imiyalelo yokusebenza
Using Preset Countdown Timers
The Znewtech Timer features five preset countdown durations: 5, 15, 30, 45, and 60 minutes. To activate a timer:
- Ensure the timer is in clock display mode.
- Simply rotate the timer so that the desired preset time (e.g., "5 min", "15 min") is facing upwards. The countdown will begin automatically.
- The LCD screen will display the remaining time.
- When the countdown reaches zero, the alarm will sound, and the backlight will flash (if enabled).
- To stop the alarm, simply rotate the timer to a different side or press the "SNOOZE/LIGHT" button on top.
Isithombe: Ngaphambili view of the timer, illustrating the preset time markings on each side.
Image: The timer in use on a desk, demonstrating its practical application.
Imodi yewashi
To return the timer to clock display mode, rotate it so the side marked "Clock" (indicated by a square icon) is facing upwards. The current time will be displayed.
Ukulungisa Ivolumu
The timer offers three volume settings: High, Low, and Silent. To adjust the volume:
- Locate the volume control button/switch on the back of the timer (often labeled with a speaker icon).
- Press or slide to cycle through the available volume levels.
- In Silent mode, the timer will rely solely on the flashing backlit visual alert.
Umsebenzi wokusnuza/wokukhanya
Press the "SNOOZE/LIGHT" button located on the top of the timer to temporarily silence an active alarm or to illuminate the display backlight for a few seconds in low-light conditions.
Image: The timer's backlit display, visible in a dark environment.
Isondlo
To ensure the longevity and optimal performance of your Znewtech Timer:
- Ukuhlanza: Wipe the timer with a soft, dry cloth. Do not use abrasive cleaners or immerse it in water.
- Ukushintshwa Kwebhethri: Replace batteries promptly when the display becomes dim or the timer functions erratically. Always use fresh AAA batteries.
- Isitoreji: Gcina i-timer endaweni epholile, eyomile uma ingasetshenziswa isikhathi eside.
Ukuxazulula inkinga
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Timer not starting/Display blank | Amabhethri aphansi noma aphelelwe yisikhathi; Ukufakwa kwebhethri okungalungile. | Replace batteries with new AAA batteries. Ensure correct polarity. |
| I-alamu ayikhali | Volume set to Silent; Speaker obstructed. | Check volume setting and adjust to High or Low. Ensure speaker on back is clear. |
| LCD display appears dim or blurry when inverted (e.g., 30 min side up) | Viewing angle sensitivity of LCD. | Lungisa eyakho viewing angle or position the timer at eye level for optimal clarity. |
| Timer does not register rotation for 5-minute setting | Internal mechanism needs slight adjustment. | Gently shake the timer or rotate it slightly to ensure the internal mechanism engages. |
| Clock time resets unexpectedly | Batteries jostled or briefly disconnected. | Re-set the clock time. Ensure batteries are firmly seated in the compartment. Avoid strong impacts. |
Imininingwane
| Inombolo Yemodeli | ZNT-ZT-X1C |
| Ibhrendi | I-Znewtech |
| Umbala | I-Cyan |
| Okubalulekile | Ipulasitiki |
| Ubukhulu bomkhiqizo (D x W x H) | 1.5" x 4.75" x 4.25" |
| Isisindo sento | Amagremu angu-322 (ama-ounces angu-11.4) |
| Number of Preset Settings | 5 (5, 15, 30, 45, 60 minutes) |
| Umthombo wamandla | 2 x AAA Amabhethri (angafakiwe) |
| I-UPC | 742567526554 |
| Izwe azalelwe kulo | China |
Iwaranti kanye Nokusekela
The Znewtech Home & Office Timer comes with a Iwaranti Yonyaka owodwa kusukela ngedethi yokuthenga. Lesi siqinisekiso simboza amaphutha okukhiqiza nokusebenza ngaphansi kokusetshenziswa okuvamile.
For warranty claims, technical support, or any questions regarding your product, please contact Znewtech customer service through the retailer's platform or visit the official Znewtech store on Amazon: Znewtech Store.
Please have your model number (ZNT-ZT-X1C) and proof of purchase ready when contacting support.
