Isingeniso
This manual provides detailed instructions for the installation, operation, and maintenance of your OPTONICA FL5848 LED Floodlight with integrated motion sensor. This slim 30W LED floodlight ensures reliable and uniform illumination. Its aluminum body is corrosion-resistant and designed to withstand adverse weather conditions. With an IP65 protection rating, the LED floodlight is suitable for outdoor and humid environments.
Imiyalo yokuphepha
Sicela ufunde le miyalelo yokuphepha ngokucophelela ngaphambi kokufakwa nokusebenza. Ukwehluleka ukulandela le miyalelo kungabangela ukushaqeka kukagesi, umlilo, noma ezinye izingozi.
- Qinisekisa ukuthi ugesi unqanyuliwe ngaphambi kokufaka noma ukulungiswa.
- Ukufakwa kufanele kwenziwe ngumsebenzi kagesi oqeqeshiwe.
- Ungabheki ngqo emthonjeni wokukhanya we-LED uma ukhanyisiwe.
- Ungawushintshi umkhiqizo nganoma iyiphi indlela.
- Gcina kude nezinto ezivuthayo.
Okuqukethwe Kwephakheji
Qinisekisa ukuthi zonke izingxenye zikhona kuphakheji:
- OPTONICA FL5848 LED Floodlight (non-replaceable bulb)
- I-Mounting Bracket
- Incwadi Yokufundisa (le dokhumenti)
Ukusetha nokufaka
Follow these steps for proper installation of your LED floodlight:
- Khetha Indawo: Select a suitable outdoor location for mounting. The recommended mounting height is 1.8 to 2.5 meters for optimal motion sensor performance. Ensure the area is clear of obstructions that might block the sensor's field of view.
- Ukunqanyulwa kwamandla: Ngaphambi kokuqala noma yimuphi umsebenzi kagesi, qiniseka ukuthi ugesi oyinhloko endaweni yokufaka ucishiwe ku-circuit breaker.
- Ukukhweza ubakaki: Use appropriate screws and wall plugs (not included) to securely fasten the mounting bracket to the desired surface. The bracket allows for angle adjustment.
- Uxhumano Lwezintambo: Connect the floodlight's power cable (approx. 25 cm) to your main electrical supply. Ensure correct polarity (Live, Neutral, Earth). All connections must be secure and insulated. This product operates on 170-265V, 50-60Hz.
- Attach the Floodlight: Secure the floodlight to the mounted bracket using the provided hardware. Adjust the angle of the floodlight to illuminate the desired area.
- Ukubuyisela Amandla: Uma ukufakwa sekuqediwe futhi konke ukuxhumeka kuvikelekile, buyisela amandla kusekethi.
Isithombe: Emuva view of the floodlight, illustrating the heat sink fins and the sturdy mounting bracket. The cable entry point is visible, emphasizing the need for secure wiring.
Imiyalelo yokusebenza
The OPTONICA FL5848 features an integrated motion sensor with adjustable settings. The sensor has a detection angle of 120° and a detection range of 5-15 meters.
Izilungiselelo zenzwa yokunyakaza:
The motion sensor unit has three adjustable knobs:
Isithombe: Ngemininingwane view of the motion sensor's adjustment knobs. From left to right, these are typically for TIME, SENS (Sensitivity), and LUX (Light Level).
- ISIKHATHI (Isikhathi Sokulibaziseka): This knob controls how long the light stays on after motion is detected and no further motion is sensed. Adjustable from 12 seconds to 6 minutes. Turn clockwise to increase the duration.
- I-SENS (Ukuzwela): This knob adjusts the detection range of the motion sensor, from 5 to 15 meters. Turn clockwise to increase sensitivity and detection range.
- LUX (Light Level): This knob determines the ambient light level at which the sensor will activate the floodlight.
- Turn towards the "sun" symbol (max LUX, 2000 Lux) for the light to activate during both day and night.
- Turn towards the "moon" symbol (min LUX, 3 Lux) for the light to activate only in low light conditions or darkness.
Ukuhlola inzwa: After installation, set the TIME to minimum and LUX to maximum (sun symbol). The light should turn on when motion is detected. Once satisfied with the detection, adjust TIME and LUX to your desired operational settings.
Isondlo
The OPTONICA FL5848 LED Floodlight is designed for minimal maintenance. However, regular cleaning can help maintain optimal performance and appearance.
- Ukuhlanza: Periodically clean the floodlight's surface and the motion sensor lens with a soft, damp indwangu. Ungasebenzisi izihlanzi ezihudulayo noma izinyibilikisi, njengoba zingalimaza isiphetho noma inzwa.
- Ukuhlola: Occasionally check the mounting bracket and wiring connections for any signs of wear, corrosion, or loosening. Ensure the floodlight is securely fastened.
- Isikhathi sempilo se-LED: The LED light source is designed for a long lifespan (average 25,000 hours) and is not replaceable. If the LEDs fail, the entire unit should be replaced.
For information on recycling and cleaning broken lamps, please refer to relevant local guidelines or visit the provided links:
Ukuxazulula inkinga
If you encounter issues with your OPTONICA FL5848 LED Floodlight, refer to the following common problems and solutions:
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Ukukhanya akukhanyi. | Akukho ukunikezwa kwamandla. LUX setting too low (daylight). Inzwa ayiboni ukunyakaza. | Hlola ukuxhumeka kwamandla kanye ne-circuit breaker. Adjust LUX knob towards "sun" symbol. Check SENS setting and ensure no obstructions. |
| Ukukhanya kuhlala kuvuliwe. | Ukunyakaza okungaguquki endaweni yokuthola. TIME ukusetha yinde kakhulu. Ukungasebenzi kahle kwenzwa. | Clear detection area. Lungisa inkinobho ye-TIME ibe yisikhathi esifushane. Xhumana nokwesekwa kwamakhasimende uma inkinga iqhubeka. |
| Iyacwayiza noma ifiphele. | Ukunikezwa kwamandla okungazinzile. Izintambo ezonakele. | Consult a qualified electrician to check power supply. Inspect wiring for damage (with power off). |
| Sensor not detecting motion effectively. | Isethingi ye-SENS iphansi kakhulu. Mounting height incorrect. Izithiyo endleleni yokuthola. | Adjust SENS knob to increase sensitivity. Ensure mounting height is 1.8-2.5m. Remove any objects blocking the sensor's view. |
Imininingwane
Detailed technical specifications for the OPTONICA FL5848 LED Floodlight:
- Imodeli: FL5848
- Ibhrendi: I-Optonica
- Amandla: 30 W
- I-Operating Voltage: 170-265 V, 50-60 Hz
- Ukushisa Kombala Okhanyayo: 4500 K (Okumhlophe Okungathathi hlangothi)
- I-Luminous Flux: 2250 lm
- Ukusebenza Okukhanyayo: 85 lm/W
- Inkomba Yokunikeza Umbala (CRI): > 70 Ra
- I-Angle ye-Beam: 100°
- Isitholi Sokunyakaza: Yebo
- I-engeli yokutholwa: 120°
- Ibanga Lokuthola: 5-15 m (adjustable)
- Delay Time (TIME): 12 sec - 6 min (adjustable)
- Light Value (LUX): 3-2000 Lux (iyalungiseka)
- Ukuphakama Kokukhweza: 1.8-2.5 m
- Kucimeke: Cha
- Ukushintsha Imijikelezo: 100,000
- Isilinganiso Sokuphila: 25,000 amahora
- Isici samandla: > 0.9
- Uhlobo Lokuvikela: IP65
- Isikhathi sokuqala: <1 s
- Okuqukethwe kwe-Mercury: 0.0 mg
- Ibanga Lezinga lokushisa: -30°C kuya +50°C
- Ubude bekhebula lokuxhuma: Cishe. 25 cm
- Okubalulekile: I-Aluminium
- Umbala: Emhlophe
- Ubukhulu (L x H x D): 180 x 145 x 32 mm
- Ikilasi Lokusebenzisa Amandla: A+
- Ukusetshenziswa kwamandla anesisindo: 30 kWh / 1000 h
Image: The Optonica FL5848 LED Floodlight, showcasing its compact design and integrated motion sensor unit at the bottom.
Iwaranti kanye Nokusekela
OPTONICA products are manufactured to high-quality standards. For warranty information and customer support, please refer to the retailer or manufacturer's official website where you purchased the product. Keep your proof of purchase for warranty claims.
For further assistance or technical inquiries, please contact Optonica customer service.
