ASRock B450 Gaming-ITX/AC Mini-ITX Motherboard Instruction Manual

1. Isingeniso

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ASRock B450 Gaming-ITX/AC Mini-ITX Motherboard. Please read this manual thoroughly before proceeding with installation to ensure proper setup and to prevent damage to your components.

Izinyathelo Zokuphepha:

• Always disconnect the power cord from the wall outlet before touching any components.
• Gqoka ibhande lesihlakala elilwa nokungaguquguquki noma uthinte njalo into yensimbi egxilile ukuze ukhiphe ugesi ongaguquki.
• Phatha izingxenye ngemiphetho yazo ukuze ugweme ukuthinta izingxenye ezibucayi.
• Gcina zonke izingxenye kude nomswakama kanye nokushisa okukhulu.

Figure 1: ASRock B450 Gaming-ITX/AC Motherboard and its retail packaging.

2. Ukusetha nokufakwa

Follow these steps for proper installation of your motherboard and associated components.

2.1. Ukufakwa kwe-CPU

Carefully open the CPU socket lever. Align the triangular mark on the CPU with the corresponding mark on the socket. Gently place the CPU into the socket without forcing it. Close the lever to secure the CPU.

Umfanekiso 2: Phezulu-phansi view of the ASRock B450 Gaming-ITX/AC Motherboard, highlighting the CPU socket and surrounding components.

2.2. RAM (Memory) Installation

Open the clips on both ends of the DIMM slots. Align the notch on the DDR4 memory module with the notch in the DIMM slot. Insert the memory module firmly until the clips snap into place. This motherboard supports 2x DDR4 DIMM slots.

2.3. M.2 Ukufakwa kwe-SSD

Locate the M.2 slot on the motherboard. Remove the screw and standoff. Insert the M.2 SSD at an angle into the slot. Push down the SSD and secure it with the screw onto the standoff. This motherboard features an Ultra M.2 slot.

2.4. Ukufakwa kwe-Motherboard ku-Case

Install the I/O shield into the case's rear opening. Align the motherboard with the standoffs in your PC case. Secure the motherboard with screws. Ensure all ports align correctly with the I/O shield.

Umfanekiso 3: I-engeli view of the ASRock B450 Gaming-ITX/AC Motherboard, showing its compact size and various connectors.

2.5. Ukuxhumeka Kokunikezwa Kwamandla

Connect the 24-pin ATX power connector and the 8-pin CPU power connector from your power supply to the corresponding sockets on the motherboard. Ensure all connections are firm.

2.6. Graphics Card Installation (Optional)

Open the retention clip on the PCI-Express 3.0 x16 slot. Insert your graphics card firmly into the slot until the clip snaps into place. Secure the card to the case with screws.

2.7. Peripheral and Front Panel Connections

Connect SATA drives to the SATA3 ports. Connect front panel USB ports, audio jacks, power button, reset button, and LED indicators to the appropriate headers on the motherboard. Refer to your case manual for specific front panel header pin assignments.

Figure 4: Close-up of the rear I/O panel of the ASRock B450 Gaming-ITX/AC Motherboard, displaying various connectivity options.

Umfanekiso 5: Okuningiliziwe view of the ASRock B450 Gaming-ITX/AC Motherboard's rear I/O ports, including USB, LAN, audio, and Wi-Fi antenna connectors.

3. Iziqondiso Zokusebenza

After successful hardware installation, connect your display, keyboard, and mouse. Power on your system. The system should boot to the BIOS/UEFI interface or begin operating system installation if a bootable drive is detected.

Ukuze ufake uhlelo lokusetha lwe-BIOS/UEFI, cindezela inkinobho ethi Del or F2 key during the Power-On Self-Test (POST) sequence. Here you can configure system settings, boot order, and monitor hardware status.

Install your preferred operating system (e.g., Microsoft Windows 10 64-bit) from a bootable USB drive or DVD. Ensure all necessary drivers are installed for optimal performance. Drivers can typically be found on the ASRock support webisayithi lemodeli yakho yebhodi lomama.

4. Isondlo

Ukugcinwa njalo kusiza ukuqinisekisa ukuthi ibhodi lakho lomama lihlala isikhathi eside futhi lisebenza kahle.

• Ukuhlanza: Hlanza uthuli njalo kubhodi lomama kanye nakumafeni ekhava usebenzisa umoya ocindezelwe. Qinisekisa ukuthi uhlelo luvuliwe futhi aluxhunyiwe ngaphambi kokuhlanza.
• Izibuyekezo Zomshayeli: Keep your motherboard drivers (chipset, audio, LAN, Wi-Fi) updated. Visit the ASRock official website for the latest driver versions.
• Izibuyekezo ze-BIOS: Only update the BIOS if necessary, following the instructions provided by ASRock carefully. Incorrect BIOS updates can render the motherboard inoperable.
• Ukuhlolwa Kwezingxenye: Ensure all cables and components are securely connected.

5. Ukuxazulula izinkinga

Uma uhlangabezana nezinkinga, bheka izinyathelo ezilandelayo ezivamile zokuxazulula izinkinga:

• Awekho Amandla/Akukho I-Boot:
  • Hlola konke ukuxhumana kwamandla (i-ATX enamaphini angu-24, i-CPU enamaphini angu-8, i-GPU).
  • Qinisekisa ukuthi ukunikezwa kwamandla kuvuliwe.
  • Verify the front panel power button connection.
• Akukho Ukuboniswa:
  • Ensure the monitor is connected to the graphics card (or motherboard if using an APU).
  • Hlela kabusha amamojula ekhadi lehluzo kanye ne-RAM.
  • Test with a single RAM stick.
• Ukungazinzi Kwesistimu/Ukuphahlazeka:
  • Hlola amazinga okushisa e-CPU kanye ne-GPU.
  • Ensure RAM is correctly installed and compatible.
  • Update drivers and BIOS to the latest stable versions.
• I-Peripheral Ayitholakalanga:
  • Qinisekisa ukuxhumana kwekhebula.
  • Install or update relevant drivers.
  • Test the peripheral on another port or system.

6. Imininingwane

7. Iwaranti kanye Nokusekela

Your ASRock B450 Gaming-ITX/AC Motherboard is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official ASRock webindawo.

For technical support, driver downloads, and BIOS updates, please visit the ASRock support page: www.asrock.com/support

Always ensure you are using official ASRock resources for support and downloads to maintain product integrity and performance.